Welcome to Sytech! Thank you for purchasing the 10 Portable TV SY-340HD. Please read this manual carefully before operating your product and pay close attention to the precautions which are mentioned below Store this user manual in a safe place for future reference. Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: Never stare directly into the laser beam. Warning: when the unit using by child, parents must make sure to let the child understand all contents in Instruction book how battery using to guarantee using battery correctly all the time. Warning: when find battery overheat, swell or dour, please stop using battery and contact service centre for getting replacement. N Notes on Copyrights: It is forbidden by law to copy, broadcast, show,broadcast via cable,play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision.Copy protection signals are recorded on some discs.when recording and playing the pictures of these discs picture noise will appear.this product incorporates copyright protection technology that is protected by method claims of certain U.S.Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER: You can find the serial number on the back of the unit.this number is unique to this unit and not available to others.you should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. Date of Purchase Warning: do not charging battery on the place of insufficient ventilation such as: mattress, sofa, cushion, soft mat... Warning: we will not take any responsibility if user incorrectly use battery, not following our warning instruction label on the battery case. charge strong impact over heat 40 C 1
Identification of Controls Main Unit 1 2 3 4 5 6 7 8 9 10 11 12 1.SETUP 2.ENTER 3. 4.UP 5. DOWN 6.LEFT/VOL- 7. RIGHT/VOL+ 8.AV OUT 9.COAXIAL 10.Earphone Socket 11.ON/OFF 12.DC IN 9-12V 13. ANT. 14. HDMI INPUT 15.USB AV OUT COAXIAL OFF ON DC IN 9-12V HDMI ANT. 13 14 15 2
Identification of Controls Remote control unit 1 2 3 4 5 6 POWER 1 2 3 4 5 6 7 8 9 0 ZOOM REC VOL- VOL+ REPEAT MODE MUTE 13 14 15 16 17 18 19 4.SUBTITLE Press SUBTITLE repeatedly during playback to viwe a different subtitle languages, if avilable. 5.ZOOM JPEG: Use ZOOM to enlarge or shrink the picture. Each press of the ZOOM button change the TV screen 6.REC Record digital service. 7.ENTER and Enter 7 8 9 10 11 12 1.POWER On/off the power supply 2.VOL - Adjust VOLUME. ENTER 3.0-9 NUMBER BUTTON Selects numbered items in a menu. FAV TV/RADIO TTX EPG 20 21 22 23 24 25 26 27 3 8.SETUP Main Menu/Return 9.FAV Open Favorite Programs List Menu 10.TV/RADIAO Switch between TV and Radio source 11. 12.DISPLAY Display the information of the current signal 13.MODE Mode menu setting 14.VOL + Adjust VOLUME. 15.MUTE Mute the sound
Identification of Controls Remote control unit 16.REPEAT Repeat Play mp3 and video 17.AUDIO Press AUDIO repeatedly during playback to hear a different audio language or audio track, if avilable. 18.STOP 19.PLAY/PAUSE 20.RETURN 21.TTX 22.EPG Show EPG information 23. BUTTON Previous option. 24. BUTTON Next option. 25. BUTTON Fast forward 26. BUTTON Fast backward 27. RED/GREEN Some specific function 4
MODE MENU SETTING PICTURE OPTION BRIGHT CONTRAST COLOR ENGLISH RESET 10 10 10 HPOSITION 50 VPOSITION 50 STANDBY 4H Brightness Set the brightness of the screen. Contrast Set the Contrast of the screen. Color Set the colours of the screen. ENGLISH Set the OSD Language RESET Reset to default setting. HPOSITION VPOSITION :Adjust screen hposition and vposition STANDBY This function makes it possible to automatically put the device into standby mode 3 or 4 hours. 3 H (3 hours): The device will automatically go into standby mode after 3 hours have passed from the time that any button was pressed. 4 H (4 hours): The device will automatically go into standby mode after 4 hours have passed from the time that any button was pressed. OFF (Off): The automatic standby function will be deactivated. PHVT-1008THD 15050524-CPT 151024-V1.0 Machine model and soft version 5
First Time Installation Installation Guide Basic Operation Program Manage Settings OSD Language Country Channel Search English Germany To access the Menu, press the MENU button and select [Program]. The Menu provides options to adjust theprogram Manage Settings. Select an option and press or RIGHT to adjust that setting. Press the button to exit the Menu. Exit Exit After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press Power button to switch receiver on. If you are using the receiver for the first time or restored to Factory Default, the Main Menu will appear on your TV screen. Program Program Edit Sort By LCN LCN On (1) Select [OSD Language] and press RIGHT/LEFT key to select an language. (2) Select [Country] and press RIGHT/LEFT key to select your country of residence. (3) Select [Channel Search] and press RIGHT or key to begin Automatic channel search. (4) Once channel tuning is complete, you are now ready to watch TV. Exit Return 6
First Time Installation Program Edit To edit your program preferences (lock, skip, favourite, move or delete), you will need to enter the Program Edit Menu. This Menu requires a password to access. Enter the default password '000000'. ALL TV 003 ITV1 004 Channel 4 006 ITV2 010 ITV3 013 More 4 014 E4 030 ITV4 037 Quiz Call Move Skip Program Edit Lock Delete 21:00-22:30 Secret Smile 22:30-22:50 ITV News FAV FAV GOTO Rename Set Favourite Program/s You can create a shortlist of favourite programs that you can easily access.set Favourite TV or Radio program: 1.Select the preferred program then press the PAVOURITE button. A heart-shaped symbol will appear and the program is marked as a favourite. 2.Repeat the previous step to select more Favourite programs. 3.To confirm and exit the Menu,press the key. Disable Favourite TV or Radio Program: Press the FAV buton on the Remote Control with the heart-shaped symbol. Delete a TV or Radio Program/s 1.Select the Program and then press the BLUE button A message will appear.press to delete the program. 2.Repeat the previous step to select more programs to delete. Skip TV or Radio Program/s 1.Select the program you would like to skip and press the GREEN button A skip symbol is displayed. The program is marked as a skip. 2.Repeat the previous step to select more programs. 3.To confirm and exit themenu,press key. Disable a skip TV or Radio Program: Press the GREEN button on the skip program with the skip symbol. Move a TV or Radio Program/s 1. Select the preferred program then press the RED button. A move symbolwill appear. 2. Press UP/DOWN to move the program. 3. Press to confirm. 4. Repeat the above steps to move more channels. Lock Program/s You can lock selected programs for restricted view. Lock a TV or Radio Program: 1.Select the preferred program then press the YELLOW button. A lock-shaped symbol is displayed. The program is now marked as locked. 2. Repeat the previous step to select more programs. 3. To confirm and exit the menu, press the button. 4. Press the YELLOW button to disable the locked program. 5. To view the locked program, you will be require to enter either the default. View Favourite Programs: 1.Press the Fav button and the Favourite Menu will appear. 2.Press UP/DOWN to selest your Favourite Programs. 3.Press to select your favourite program. 7
Sort Sort your channels from the following options: [LCN] - Sort the channels in ascending order. [Name] - Sort the channels in alphabetical order. [Service ID] - Sort the channels according to the station. LCN (Logical channel number) Set LCN on or off. Video Setting To access the Menu, press MENU then select [Picture]. The Menu provides options to adjust the video settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting. Press to exit the menu. [576i] for PAL system TV. [576P]: for PAL system TV. [720P]: for NTSC or PAL system TV. [1080I]: for NTSC or PAL system TV. TV format If the video does not appear correctly, you need to change the settings. This should match the most common setting for TVs in your country. [NTSC]: for NTSC system TV. [PAL]: for PAL system TV. Channel Search To access the menu, press MENU and select [Search Channel]. The Menu provides options to adjust the Search Channel settings. Select an option and press RIGHT/LEFT to adjust the settings. Press to exit the Menu. Picture HDMI Aspect Ratio 16:9 Wide Screen Return Auto Search Manual Search Country Channel Search Germany Aspect Ratio You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9 Wide Screen or Auto to get the maximum display when watching TV. Return Resolution If the video does not appear correctly, change the setting. This setting is to match the most common setting for HDMI. 8
Auto Search Search and install all channels automatically. This option overwrites all preset channels. 1. Select [Auto Search] and press or RIGHT to start channel search. 2. To cancel channel search, press. Channel Search 506.0MHz/8MHZ DTV:009 Radio: 000 001 ITV1 002 ITV2 003 ITV3 004 ITV News 005 Channel 4 006 Quiz Call 007 E4 008 More 4 009 ITV4 Progress Manual Search Install new channels manually. This option adds new channels without changing the current channels list. 1. Select [Manual Search] then press or RIGHT. The channel search screen will appear. Quality Exit MENU Skip Manual Search Frequency channel 5 Frequency(MHZ) 177.5 Bandwidth: 7M 2. Press the RIGHT/LEFT key to select the channel frequency. 3. Press to start searching channels. If a channel is found, it is saved and added to the channels list. If channels cant be found, then exit the menu. Country Select your country of residence. Time Setting To access the Menu,press MENU then select [Time]. The Menu provides options to adjust the time settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings.press to exit the menu. Time Time Offset Auto Country Region Berlin Time Zore GMT +1 Return Time offset Select auto or manual for GMT offset adjustments. Country Region Country Region is set automatically when you set the country at channel search menu. Time Zone Select the Time Zone Offset when [Time Offset] is set to Manual. 9
Option To access the Menu,press MENU and select [Option]. The menu provides options to adjust the OSD Language, Subtitle Language and Audio Language. Select an option and press RIGHT/LEFT to adjust the setting.press to exit The Menu. Option OSD Language Subtitle Language Audio Language Digital Audio English Off English PCM System Parental Guidance Set Password Restore Factory Default Information Software update Return Return Parental Guidance OSD Language Select an OSD language. Audio Language Select the preferred audio language for watching TV channels.if the language is not available, the default program language will be used. Subtitle Language Select the preferred subtitle language. System Setting To access the Menu,press MENU and select [System].The menu. Provides options to adjust the system settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting.press to exit the Menu. Set Password Set or change the password for Locked programs. Enter your old Password or the default password '000000'. You will then be asked to enter your new password. To confirm re-enter your new password. Once it is confirmed, press to exit the Menu. Restore Factory Default Reset your Set Top Box to the Default Factory Settings.In Main Menu select [Restore Factory Default] and press or RIGHT to select. Enter your password or the default password '000000' and press to confirm. This option will delete all preset channels and settings. Information View model, hardware and software information. Software update Software update 10
USB To access the Menu, press the Menu button and select USB. Multimedia Photo Configure Movie Configure Return USB Multi-Media Switch to USB mode and plug in USB to view files. SCHEDULE RECORDING 1. Press[ EGP] to enter progarm list. 003 TMF Program Guide 19 Nov 16:00-17:00 Skools Out! 19 Nov 17:00-18:00 TMF Top 10 19 Nov 18:00-19:00 Matchmaker 19 Nov 19:00-20:00 Then & Now 19 Nov 20:00-01:00 No Repeat Zone 20 Nov 01:00-03:00 Matchmaker X-Ra.. 20 Nov 03:00-07:00 Lateshift 20 Nov 07:00-11:00 No Repeats Wee.. 20 Nov 11:00-11:30 Rich Girls 20 Nov 11:30-12:00 Dismissed 20 Nov 12:00-18:00 No Repeats Wee.. TMF Top 10 Fri. 19 Nov 2004 16:59 Entertainment loin TMF for a daily Top 10 countdown of the latest videos. Page: 1/1 Book INFO Book list Page Down Page Up TIMESHIFT 1. Press [pause] key on remote control to enter time shift, osd as below: Enter Time shift,waiting... 2. press[pause] key angin to start Time shift 3. you can press [ fast bace ]/[fast forward] to move the bar to the point where slide is 4. Press [stop] to exit time shift 2. Press [enter]to enter menu of add appointment progarm. Schedule Event Program Date Time Repeat Status MANUAL RECORDING 1. Press [REC] key on remote to start recording. 2. Press [stop] key fist time to stop the recording. 3. Press(enter)or exit to stop or cancel recording. Add Edit Delete 11
Troubleshooting 3. Press red to enter menu of add appointment progarm, select view or record to setting recording appointment program by manul opreation. Schedule Event Program Date Time Repeat Status 4. Press [ enter] to exit. Event Add Channel Type TV Channel No. 0003 Channel Name TMF Start Date(M/D/Y) 11/19/2004 Start Time 17:00 End Time 18:00 Repeat Once Mode Record Technical Specifications Item Sub Item Parameter Tuner Video Input Frequency RF Input level IF Bandwidth Modulation Decoder Format Output Port 170~230MHz 470~860MHz -25~-82dBm 7MHz and 8MHz QPSK,16QAM,64QAM MPEG4 AVC/H.264 HP@L4 MPEG2 MP@ML.HL CVBS Problem Potential Reasons What to do No picture Power isn't connected Connect the power The power switch is not on Switch on the power Screen shows No Signal No sound from speaker Only sound, no image on the screen DVB-T cable not connected Incorrect setting No or incorrect connection with audio cable Sound on mute Incorrect sound track No or incorrect connection with AV cable The program is a radio program Plug in the DVB-T cable Reset setting Connect the audio correctly Turn off mute function Try another sound track Make sure cables are connected correctly Press <TV/RADIO> key to shift into TV mode Remote Control The battery is exhausted Change battery is not responding Remote Control is not facing or close enough to the Set Top Box cable Adjust the position of the Remote Control and move closer to the unit Audio Decoder Format MPEG-1 (layer1&2&3) Audio output Stereo Power Voltage DC 9V (1.5 A) Working Power 10W 12 The image stopped suddenly or mosaic The signal is too weak Strengthen the signal
Environmental disposal You can help protect the environment! Please remember to respect the local regulations: hand-in the non-working electrical equipment to an appropriate waste disposal centre If you want to dispose of this equipment, please do not use the ordinary dust bin! -The presence of dangerous substances in the electrical and electronic equipments can have potential consequences on the environment and human health in the cycle of reprocessing this product. -Therefore, at the end of its lifetime, this product shall not be disposed with other non-recycled waste. Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. -Local authorities and resellers have set special procedures for the purpose of collecting and recycling this product (please contact your local authority for further details). You have the obligation to use the selective waste collection systems put in place by your local authority. -If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. Declaration of Conformity Manufacturer Name: Satyatrade S. L. Address: Pol.Ind.La Raya. C/ Guadalquivir, 2. Camarma de Esteruelas, 28816 Madrid Tel: 902 430 967 Fax: 91 8864285 NIF: B83254763 Manufacturing country: China Description: Portable TV Sytech SY-340HD complies with the following directives: CE Standard: Directive 2004/108/EC ROHS Standard: Directive 2011/65/EU Restriction of Hazardous Substances Signed: Ajeet Nebhwani Utamchandani Sole Administrator By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.