Product Specification VGA Progressive Scan Machine Vision Board Camera
Safety Precautions CAUTION CAUTION RISK OF RISK ELECTRIC OF ELECTRIC SHOCK SHOCK DO NOT DO OPEN NOT OPEN RISK OF ELECTRIC SHOCK DO NOT OPEN! CAUTION: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT TO CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE REMOVE COVER (OR BACK). NO USER SERVICEABLE TO REDUCE PARTS INSIDE. THE RISK OF ELECTRIC SHOCK, DO NOT PARTS REMOVE INSIDE. COVER (OR BACK). NO USER SERVICEABLE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. REFER PARTS SERVICING INSIDE. TO QUALIFIED SERVICE PERSONNEL.!!! REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.! The lightning flash with arrowhead The lightning symbol, within flash with an equilateral arrowhead triangle, symbol, The lightning is within intended an flash equilateral with arrowhead to alert the triangle, user to the is symbol, intended within presence to alert an equilateral of uninsulated the user triangle, to dangerous the presence is intended v o ltag of uninsulated to alert the e wi th in dangerous user to the th e p r o du ct s v presence o ltag of uninsulated dangerous enclosure e wi th in that thmay e p rbe o du of ct sufficient s v o ltag e wi th in th e p r o du ct s enclosure magnitude that may to be constitute of sufficient a risk of enclosure that may be of sufficient magnitude electric to shock constitute to persons. a risk of magnitude to constitute a risk of electric shock to persons. electric shock to persons. The exclamation point within an The equilateral triangle is intended to alert The exclamation exclamation point point within within an an equilateral the user to the presence of important equilateral triangle triangle is is intended intended to to alert alert the operating and maintenance (servicing) the user user to to the the presence of of important operating i n st r u cti o ns t h e l i te r at u r e and and maintenance (servicing) i n accompanying the appliance. i nst st r ur ucti cti oons ns in t ht he e l il te i ter at r at uur er e accompanying the the appliance. Warning: Warning: Product Precautions For U.S.A. For U.S.A. For U.S.A. This Warning: equipment This equipment generates generates and uses and radio uses frequency radio frequency energy energy and if and if not not installed and used properly, I.e., in strict accordance with the This installed equipment and used generates properly, and uses I.e., in radio strict frequency accordance energy with and the if instruction instruction manual, may cause harmful interference to radio not installed manual, and used may properly, cause harmful I.e., in interference strict accordance to radio with the communications. communications. It has been tested and found to comply with the instruction manual, It has may been cause tested harmful and found interference to comply to radio with the limits limits for a Class A computing device pursuant to Subpart J of Part communications. for a Class A It computing has been tested device and pursuant found to to Subpart comply J with of Part the 15 15 of FCC Rules, which are designed to provide reasonable limits of FCC for Rules, a Class which A computing are designed device to pursuant provide reasonable to Subpart J of Part protection against such interference when operated in a commercial protection 15 of FCC against Rules, such which interference are designed when to provide operated reasonable in a commercial environment. environment. protection against such interference when operated in a commercial environment. For Canada For Canada Warning: For Canada Warning: Warning: This digital apparatus does not exceed the Class A limits for radio This digital noise apparatus emissions does from not digital exceed apparatus the Class set A out limits in the for Radio radio noise This emissions digital apparatus does not exceed the Class A limits for radio Interference from Regulations digital apparatus of the Canadian set out in Department the Radio of Interference noise emissions from digital apparatus set out in the Radio Communications. Regulations of the Canadian Department of Interference Regulations of the Canadian Department of Communications. Communications. WARNING: WARNING: WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE TO THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT FIRE FIRE OR OR SHOCK HAZARD, DO DO NOT NOT EXPOSE THIS THIS APPLIANCE TO TO RAIN RAIN OR OR MOISTURE. Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it. Improper handling or storage could damage the camera. Do not pull or damage the camera cable. During camera use, do not wrap he unit in any material. This will cause the internal temperature of the unit to increase. Do not expose the camera to moisture, or do not try to operate it in wet areas. Do not operate the camera beyond its temperature, humidity and power source ratings. While the camera is not being used, keep the lens or lens cap on the camera to prevent dust or contamination from getting in the CCD or filter area and scratching or damaging this area. Do not keep the camera under the following conditions: In wet, moist, and high humidity areas Under hot direct sunlight In high temperature areas Near an object that releases a strong magnetic or electric field Areas with strong vibrations Use a soft cloth to clean the camera. Use pressured air spray to clean the surface of the glass. DO not scratch the surface of the glass. Product Specification 2 Rev 1.0
Copyright & Disclaimer Sensor Technologies America, Inc. (DBA Sentech America) believes the contents and specifications of its website, catalog, documentation and ads are correct; however, Sentech America provides no representation or warranty regarding such information or products(s) contained therein. It is requested that Sentech America be given appropriate acknowledgement in any subsequent use of such work by a third party. While every effort has been made to ensure that the details contained in Sentech America s website and all documentation are correct and up-to-date, Sentech America assumes no liability, legal or otherwise for any errors in listings, specifications, part numbers, process, software or model applications. Sentech America reserves the right to change specifications, product descriptions, product quality, pricing and application at any time without prior written or oral notice. Any party using such information assumes all risk for any and all damaged caused to themselves, a third party and/or property by virtue of incorrect information and/or failure of these products. By installing and/or using a Sentech America software development kit or other similar product and/or information obtained from Sentech America s website, catalog, documentation or ads, you hereby accept and understand these stated terms and conditions. Product Specification 3 Rev 1.0
Contents I. Introduction... 5 II. Specifications... 5 III. Mechanical Drawing... 6 Product Specification 4 Rev 1.0
I. Introduction The Series board-level cameras are full featured, low cost, VGA progressive scan machine vision cameras with full frame 60fps VGA output, partial scanning, triggering and reset capabilities. The has a compact size of 30 x 30 x32mm. Features: VGA 1/3 Monochrome IT CCD Analog Compact Size Progressive Scan Electronic Shutter II. Specifications Model: Resolution: Image Sensor: Signal Format: Frame Rate: Effective Picture Element: Active Picture Element: Chip Size: VGA (0.3 MegaPixel) 1/3 Interline CCD (ICX424AL) Monochrome Progressive Analog 30, 60 fps 659 (H) x 494 (V) 648 (H) x 494 (V) 5.79 (H) x 4.89 (V) mm Cell Size: 7.4 (H) x 7.4 (V) µm Horizontal Drive Frequency: 12.2727255 MHz (Normal), 24.545451 MHz (Double) Horizontal Frequency: 15.7345 khz (Normal), 31.468 khz (Double) Vertical Frequency: 29.97 Hz (Normal), 59.94 Hz (Double) Minimum Illumination: 0.8 Lux @ F1.2, 20 IRE; 0.14 Lux @ F1.2, 50 IRE Resolution: 486 TVL (Horizontal) 494 TVL (Vertical) Gamma 1.0 Lens Mount: CS Mount Sync System: Internal and External (HD/VD) Automatically Scanning Method: Full Scan, Partial Full Scan, Partial Scan (½, ¼), Binning, Binning Partial Scan (1/1, ½, ¼) Scanning System: Progressive (Normal/Double) S/N Ratio: 50dB (Gain 0dB) Gain: Electronic Shutter: Trigger Shutter: Video Output: Shock: Vibration: AGC / Manual (4 to 24 db) 1/30 ~ 1/16,000 Second (10 Steps) 1/60 ~ 1/32,000 Second (10 Steps at Double Speed) Pulse Width Trigger (3~1/100,000 second) Edge Preset Trigger (10 Steps) VS 1Vp-p 75Ω 70G (3 directions, 3 times each) 10G (20 to 200 Hz) Power Supply: DC 12V ± 10% Power Consumption: Operation Temperature: 110 ma -10⁰C ~ +45⁰C Dimensions: 30 (W) x 30 (H) x 32 (D)mm (1.2 x 1.2 x 1.28 ) Weight: 27g (.95 oz.) Product Specification 5 Rev 1.0
III. Mechanical Drawing Note: Dimensions are given in mm. Product Specification 6 Rev 1.0
Revisions Rev. Date Changes Notes 1.0 Original created in 2006 Product Specification 7 Rev 1.0
Senor Technologies America, Inc. 1345 Valwood Parkway, Suite 320 Carrollton, Texas 75006-6891 TEL (972)481-9223 FAX(972) 481-9209 URL http://www.sentechamerica.com/ Sensor Technology Co., Ltd. 7F, Harada Center Building 9-17, Naka cho 4 chome Atsugi-city, Kanagawa 243-0018 Japan TEL +81-46-295-7061 FAX +81-46-295-7066 URL http://www.sentech.co.jp/ Taiwan Sensor Technology, Inc. 3F-6, No. 9, Aiguo W, Rd., Jhong Jheng District Taipei City 100, Taiwan, R.O.C. TEL 886-2-2383-2331 FAX 886-2-2370-8775 EMAIL sentech0501@yahoo.com.tw Product Specification 8 Rev 1.0