Certain Lined Paper Products from India: Initiation of Changed Circumstances Review

Similar documents
WILLIAMSON LAW BOOK COMPANY

dery What is Binding?

all you need to know about binding

1.0 DESCRIPTION. This specification covers roll-up signs to be used in temporary traffic control zones.

Page Count. Helpful Resources

NEW. Tailored for Business and You CLASSIC COLOURS VIVID COLOURS

Physical Processing Guidelines for Shelf- Ready Chinese Approval Materials

FEDERAL TRADE COMMISSION. 16 CFR Part 410. Deceptive Advertising as to Sizes of. Viewable Pictures Shown by Television Receiving Sets

GENERAL REGULATIONS FOR THE PRESENTATION OF THESES

Standards for the Format and Binding of a Thesis

In this document, the Office of Management and Budget (OMB) has approved, for a

Diary Planner Buying Guide

Class B digital device part 15 of the FCC rules

5Books, pads and. time management

Technical writing, business support and printing / binding services. Printing / Binding Services Overview

3 Foam Sealed Closure 2" (50 mm) with Compound Compression

Santa Clara University Department of Electrical Engineering

RINGO HOME PROJECT DUE: December 9, 2015 ***See examples and Rubric on Website***

In-Wall Control Mount for ipod Touch

Astronomy Lab - Lab Notebook and Scaling

Mr. Thibodeaux s School Supply List English III Honors, English IV, AP English, and Desktop Publishing Last Updated May 2015

MIRAGE. Skyline Mirage Set-Up Instructions Skyline Exhibits

q Individual q Family q School q Church q Business q Organization q Recognized Non-profit [501(c)3 needed]

SADDLE STITCHING 8 TO 64 PAGES $$$$$

PREKINDERGARTEN Elementary Supply List & Instructions for Drop-Off Elementary Supply Lists

Plan for Generic Information Collection Activity: Submission for. National Transportation Safety Board (NTSB).

Guide to the Inspection of Printed Products

Cable System Installation Guide

Rehoboth Christian College - Secondary

GOLD COLLECTION Wall Calendar Beautiful gold design on each sheet FSC Certified January to December. Yearly calendar at the bottom of each sheet

Book Report Information Students will be required to complete 5 book reports this year. The due dates are as follows: #1 #2 #3 #4 #5

Guide to the Alexander Binder Company records

Preparation. Language of the thesis. Thesis format and word length. Page 1 of 6. Specifications for Thesis

Handbook for the Applied Master s Final Project

Coastal Carolina University RE-BID WILLIAMS BRICE RENOVATION AND REPAIR October 19, 2018 Construction Documents

1. Introduction. nexogy is more than just next technology, it is a team working for customer solutions.

Formatting Your Thesis or Dissertation

All Local Agent Health Departments Regional Directors Attn: Food Safety and Recreational Licensing Sanitarians

[MB Docket Nos , ; MM Docket Nos , ; CS Docket Nos ,

3M Cold Shrink Splice Kit QS-III 5416A

This Chapter does not apply to applications and decisions on, development on land reserved in corridor maps.

SECTION COMMUNICATIONS HORIZONTAL CABLING

Thesis/Dissertation Preparation Guidelines

HERE UNDER SETS GUIDELINES AND REQUIREMENTS FOR WRITING AND SUBMISSION OF A TECHNICAL REPORT

Chapter 3 - The Thesis or Dissertation Requirements

Format and Score Sheet

APPENDIX B. Standardized Television Disclosure Form INSTRUCTIONS FOR FCC 355 STANDARDIZED TELEVISION DISCLOSURE FORM

Rehoboth Christian College - Secondary

SAA Museum Archives Section Working Group Example. SAA Museum Archives Section Working Group Brian Wilson 05June2012

KOMATSU LOGOTYPE MANUAL

Memorandum. December 1, The Doctoral Candidate. Office of the Registrar. Instructions for Preparing the Doctoral Dissertation

VENDOR MANUAL VERSION 2.0. SECTION 8 Quality Assurance Requirements

(12) Patent Application Publication (10) Pub. No.: US 2003/ A1

IndyGo Facility Upgrades Project 35671EE

Setting up your Interactive Science Notebook. Mrs. Woodworth s Science Classes

CI Plus Logo Guidelines

Graphic Standards. A guide to Lane s visual identity, with information on using the college logo, Lane colors and typefaces, stationery, and more.

BILOXI PUBLIC SCHOOL DISTRICT. Biloxi Junior High School

Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std kv Class 250 kv BIL

Experimental Procedure

RALLY SIGNS HAND HELD DOUBLE-SIDED SIGNS

3M Cold Shrink Splice Kit QS-III 5515A

Slashes and USPTO S-Signatures

Scotch Heavy Duty Vinyl Electrical Tape 22

European List of Standard Grades for Recovered Paper and Board. Remade Scotland. June Report Prepared for:

9 th 12 th Grade School Supplies

ATTACHMENT J.10. [Offeror s Letterhead]

HF GROUP ACMEBINDING

CONSTRUCTION SPECIFICATION FOR TRAFFIC SIGNAL EQUIPMENT

Technical Data Sheet. Scotchlite Reflective Material Series 6100 High Gloss Trim Series 6200 High Gloss Film. Retroreflective Performance.

Please order at OfficeMaxSchools.com.au

3M Cold Shrink Splice Kit QS-III 5514A

Notes on Making a Book February 10, 2017

1917.CO.NZ. PHILATELIC DISTRIBUTORS LIMITED EST MOUNT EDGCUMBE STREET, NEW PLYMOUTH 4310 p: e:

Digital StoreFront JDF with non-efi JDF-Enabled Devices

University of Wisconsin Eau Claire THESIS MANUAL

2018 DIARIES NOTEBOOKS COLLECTION

HIGH SCHOOL SCHOOL SUPPLY LISTS

TENSIONED ELPRO CONCEPT Motorized projection screen for wall or ceiling installations

BROADCAST RECEIVER. Installation Guide (BR-100-MOT, BRP-100-MOT) Document Version 1.0. BR-100-MOT, BRP-100-MOT Installation Guide

Global PET Film Marketplace; Impact on Converting Industry. Robert K Sinclair DuPont Teijin Films October 2004

Mr. Schmid s 5 th Grade Class Book Report Projects

FCC 303-S APPLICATION FOR RENEWAL OF BROADCAST STATION LICENSE

folder marker book folder notebook box of index cards binder scissors pencil eraser SCHOOL SUPPLIES

CITY POLICY SUPERSEDES: NEW CORPORATE BILLINGS AND CHEQUES - FORMS

INSTRUCTIONS FOR FCC 387

Barron County 4-H Record Book Guide

Guidelines for the Preparation and Submission of Theses and Written Creative Works

A Simple Guide for Storytellers: Printing on the Woodneath Press

WILKES HONORS COLLEGE of FLORIDA ATLANTIC UNIVERSITY REQUIREMENTS AND GUIDELINES FOR HONORS THESES

Interface Practices Subcommittee SCTE STANDARD SCTE Test Method for Drop Cable Center Conductor Bond to Dielectric

INDIRA GANDHI NATIONAL OPEN UNIVERSITY SCHEDULE OF RATES FOR OFFSET PRINTING

BRAND STANDARDS and VISUAL IDENTITY MANUAL

Provide MCIW-MCB CAMPEN with graphics and reproduction services and support to maintain the Marine Corps war fighting readiness.

The Institute of Certified General Accountants, Pakistan

PAPER: FD4 MARKS AWARD : 61. The skilled person is familiar with insect traps and is likely a designer or manufacturer of insect traps.


Tips for Perfect Binding FlexBind Hinged Photo Pages

SCHS Student Supplies

YOUR BEST INTERESTS...

Transcription:

This document is scheduled to be published in the Federal Register on 01/22/2014 and available online at http://federalregister.gov/a/2014-01163, and on FDsys.gov BILLING CODE: 3510-DS-P DEPARTMENT OF COMMERCE International Trade Administration A-533-843 Certain Lined Paper Products from India: Initiation of Changed Circumstances Review AGENCY: Enforcement and Compliance, formerly Import Administration, International Trade Administration, Department of Commerce SUMMARY: The Department of Commerce (the Department) has received information sufficient to warrant initiation of a changed circumstances review of the antidumping duty order on certain lined paper products (CLPP) from India. Specifically, based upon a request filed by Navneet Education Limited (Navneet Education), a producer/exporter to the United States of subject merchandise, the Department is initiating a changed circumstances review to determine whether Navneet Education is the successor-in-interest of Navneet Publications (India) Ltd. (Navneet Publications), a mandatory respondent in several prior administrative reviews of the CLPP Order. 1 DATES: Effective [INSERT DATE OF PUBLICATION IN THE FEDERAL REGISTER]. FOR FURTHER INFORMATION CONTACT: Cindy Robinson or Eric B. Greynolds, AD/CVD Operations, Office III, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-3797 and (202) 482-6071, respectively. 1 See Notice of Amended Final Determination of Sales at Less Than Fair Value: Certain Lined Paper Products from the People's Republic of China; Notice of Antidumping Duty Orders: Certain Lined Paper Products from India, Indonesia and the People s Republic of China; and Notice of Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September 28, 2006) (CLPP Order).

SUPPLEMENTARY INFORMATION: Background On September 28, 2006, the Department published an antidumping duty order on CLPP from India. 2 On October 17, 2013, 3 Navneet Education informed the Department that effective September 30, 2013, the former company Navneet Publications 4 changed its name to Navneet Education in accordance with the company s existing board of directors resolution and Indian law. Navneet Education stated that the name change process began in August 2013 and was finalized by the end of September 2013. Navneet Education submitted a copy of Fresh Certificate of Incorporation Consequent upon Change of Name approved by Government of India Ministry of Corporate Affairs, Registrar of Companies, Maharashtra, Mumbai, dated October 17, 2013. 5 Navneet Education explained that the purpose of its name change is to reflect the broader educational scope of the company s business in recent years, beyond the traditional and narrower paper publication line of business implied by the former name. Specifically, Navneet Education indicated that its company s modern development and direction of its business has established the company as a leading supplier of educational publications, a strong brand in the field of educational and children s publications and scholastic stationary products, and a major innovator and provider of digital learning services. 6 2 See CLPP Order. 3 See Certain Lined Paper Products from India: Request for Changed Circumstances Reviews of Navneet Publications (India) Ltd. (October 17, 2013) (CCR Request) at 8. 4 CCR Request at 2 indicated that Navneet Publications has participated as a respondent in the original antidumping duty investigation, and it has been a respondent in several antidumping duty administrative reviews, most often as a named mandatory respondent (e.g., in the second through fourth reviews it received the following company-specific margins of 1.34 percent, 0.43 percent, and 2.7 percent, respectively. In the fifth review, Navneet Publications received a non-selected rate of 11.01 percent. In the ongoing sixth review, it is again selected as a mandatory respondent). 5 See CCR Request at Attachment 1. 6 Id., at 4. 2

The company now known as Navneet Education requests that: 1) the Department conduct a changed circumstances review pursuant to section 751(b)(1) of the Tariff Act of 1930, as amended (the Act) and 19 CFR 351.216 to determine that it is the successor-in-interest to Navneet Publications for purposes of the antidumping order; and 2) the Department issue instructions to Customs and Border Protection (CBP) that reflect this conclusion. 7 We received no comments from any other interested party. Scope of the Order The scope of this order includes certain lined paper products, typically school supplies (for purposes of this scope definition, the actual use of or labeling these products as school supplies or non-school supplies is not a defining characteristic) composed of or including paper that incorporates straight horizontal and/or vertical lines on ten or more paper sheets (there shall be no minimum page requirement for looseleaf filler paper) including but not limited to such products as single- and multi-subject notebooks, composition books, wireless notebooks, looseleaf or glued filler paper, graph paper, and laboratory notebooks, and with the smaller dimension of the paper measuring 6 inches to 15 inches (inclusive) and the larger dimension of the paper measuring 8-3/4 inches to 15 inches (inclusive). Page dimensions are measured size (not advertised, stated, or tear-out size), and are measured as they appear in the product (i.e., stitched and folded pages in a notebook are measured by the size of the page as it appears in the notebook page, not the size of the unfolded paper). However, for measurement purposes, pages with tapered or rounded edges shall be measured at their longest and widest points. Subject lined paper products may be loose, packaged or bound using any binding method (other than case bound through the inclusion of binders board, a spine strip, and cover wrap). Subject merchandise may or may not contain any combination of a front cover, a rear cover, and/or 7 Id., at 1-2. 3

backing of any composition, regardless of the inclusion of images or graphics on the cover, backing, or paper. Subject merchandise is within the scope of this order whether or not the lined paper and/or cover are hole punched, drilled, perforated, and/or reinforced. Subject merchandise may contain accessory or informational items including but not limited to pockets, tabs, dividers, closure devices, index cards, stencils, protractors, writing implements, reference materials such as mathematical tables, or printed items such as sticker sheets or miniature calendars, if such items are physically incorporated, included with, or attached to the product, cover and/or backing thereto. Specifically excluded from the scope of this order are: unlined copy machine paper; writing pads with a backing (including but not limited to products commonly known as tablets, note pads, legal pads, and quadrille pads ), provided that they do not have a front cover (whether permanent or removable). This exclusion does not apply to such writing pads if they consist of hole-punched or drilled filler paper; three-ring or multiple-ring binders, or notebook organizers incorporating such a ring binder provided that they do not include subject paper; index cards; printed books and other books that are case bound through the inclusion of binders board, a spine strip, and cover wrap; newspapers; pictures and photographs; desk and wall calendars and organizers (including but not limited to such products generally known as office planners, time books, and appointment books ); 4

telephone logs; address books; columnar pads & tablets, with or without covers, primarily suited for the recording of written numerical business data; lined business or office forms, including but not limited to: pre-printed business forms, lined invoice pads and paper, mailing and address labels, manifests, and shipping log books; lined continuous computer paper; boxed or packaged writing stationary (including but not limited to products commonly known as fine business paper, parchment paper, and letterhead ), whether or not containing a lined header or decorative lines; Stenographic pads ( steno pads ), Gregg ruled ( Gregg ruling consists of a single- or double-margin vertical ruling line down the center of the page. For a six-inch by nineinch stenographic pad, the ruling would be located approximately three inches from the left of the book.), measuring 6 inches by 9 inches. Also excluded from the scope of this order are the following trademarked products: Fly lined paper products: A notebook, notebook organizer, loose or glued note paper, with papers that are printed with infrared reflective inks and readable only by a Fly pen-top computer. The product must bear the valid trademark Fly (products found to be bearing an invalidly licensed or used trademark are not excluded from the scope). Zwipes : A notebook or notebook organizer made with a blended polyolefin writing surface as the cover and pocket surfaces of the notebook, suitable for writing using a specially-developed permanent marker and erase system (known as a Zwipes pen). 5

This system allows the marker portion to mark the writing surface with a permanent ink. The eraser portion of the marker dispenses a solvent capable of solubilizing the permanent ink allowing the ink to be removed. The product must bear the valid trademark Zwipes (products found to be bearing an invalidly licensed or used trademark are not excluded from the scope). FiveStar Advance : A notebook or notebook organizer bound by a continuous spiral, or helical, wire and with plastic front and rear covers made of a blended polyolefin plastic material joined by 300 denier polyester, coated on the backside with PVC (poly vinyl chloride) coating, and extending the entire length of the spiral or helical wire. The polyolefin plastic covers are of specific thickness; front cover is 0.019 inches (within normal manufacturing tolerances) and rear cover is 0.028 inches (within normal manufacturing tolerances). Integral with the stitching that attaches the polyester spine covering, is captured both ends of a 1" wide elastic fabric band. This band is located 2-3/8" from the top of the front plastic cover and provides pen or pencil storage. Both ends of the spiral wire are cut and then bent backwards to overlap with the previous coil but specifically outside the coil diameter but inside the polyester covering. During construction, the polyester covering is sewn to the front and rear covers face to face (outside to outside) so that when the book is closed, the stitching is concealed from the outside. Both free ends (the ends not sewn to the cover and back) are stitched with a turned edge construction. The flexible polyester material forms a covering over the spiral wire to protect it and provide a comfortable grip on the product. The product must bear the valid trademarks FiveStar Advance (products found to be bearing an invalidly licensed or used trademark are not excluded from the scope). 6

FiveStar Flex : A notebook, a notebook organizer, or binder with plastic polyolefin front and rear covers joined by 300 denier polyester spine cover extending the entire length of the spine and bound by a 3-ring plastic fixture. The polyolefin plastic covers are of a specific thickness; front cover is 0.019 inches (within normal manufacturing tolerances) and rear cover is 0.028 inches (within normal manufacturing tolerances). During construction, the polyester covering is sewn to the front cover face to face (outside to outside) so that when the book is closed, the stitching is concealed from the outside. During construction, the polyester cover is sewn to the back cover with the outside of the polyester spine cover to the inside back cover. Both free ends (the ends not sewn to the cover and back) are stitched with a turned edge construction. Each ring within the fixture is comprised of a flexible strap portion that snaps into a stationary post which forms a closed binding ring. The ring fixture is riveted with six metal rivets and sewn to the back plastic cover and is specifically positioned on the outside back cover. The product must bear the valid trademark FiveStar Flex (products found to be bearing an invalidly licensed or used trademark are not excluded from the scope). Merchandise subject to this order is typically imported under headings 4811.90.9035, 4811.90.9080, 4820.30.0040, 4810.22.5044, 4811.90.9050, 4811.90.9090, 4820.10.2010, 4820.10.2020, 4820.10.2030, 4820.10.2040, 4820.10.2050, 4820.10.2060, and 4820.10.4000 of the Harmonized Tariff Schedule of the United States (HTSUS). The HTSUS headings are provided for convenience and customs purposes; however, the written description of the scope of this order is dispositive. Initiation of Changed Circumstances Review Pursuant to section 751(b)(1) of the Act, the Department will conduct a changed circumstances review upon receipt of information concerning, or a request from, an interested 7

party for a review of an antidumping duty order which shows changed circumstances sufficient to warrant a review of the order. In the event that the Department determines that expedited action is warranted, 19 CFR 351.221(c)(3)(ii) permits the Department to combine the notices of initiation and preliminary results. In accordance with 19 CFR 351.216(d), the Department has determined that the information submitted by Navneet Education constitutes sufficient evidence to conduct a changed circumstances review. In an antidumping duty changed circumstances review involving a successor-in-interest determination, the Department typically examines several factors including, but not limited to, changes in: (1) Management; (2) production facilities; (3) supplier relationships; and (4) customer base. 8 While no single factor or combination of factors will necessarily be dispositive, the Department generally will consider the new company to be the successor to the predecessor if the resulting operations are essentially the same as those of the predecessor company. 9 Thus, if the record demonstrates that, with respect to the production and sale of the subject merchandise, the new company operates as the same business entity as the predecessor company, the Department may assign the new company the cash deposit rate of its predecessor. 10 Based on the information provided in its submission, Navneet Education has provided sufficient evidence to warrant a review to determine if it is the successor-in-interest to Navneet Publication. Therefore, pursuant to section 751(b)(1) of the Act and 19 CFR 351.216(d), we are initiating a changed circumstances review. However, the Department finds it is necessary to 8 See, e.g., Certain Activated Carbon From the People's Republic of China: Notice of Initiation of Changed Circumstances Review, 74 FR 19934, 19935 (April 30, 2009). 9 See, e.g., Notice of Initiation of Antidumping Duty Changed Circumstances Review: Certain Forged Stainless Steel Flanges from India, 71 FR 327 (January 4, 2006). 10 See, e.g., Fresh and Chilled Atlantic Salmon From Norway; Final Results of Changed Circumstances Antidumping Duty Administrative Review, 64 FR 9979, 9980 (March 1, 1999). 8

issue a questionnaire requesting additional information for the review as provided for by 19 CFR 351.221(b)(2). For that reason, the Department is not conducting this review on an expedited basis by publishing preliminary results in conjunction with this notice of initiation. The Department will publish in the Federal Register a notice of the preliminary results of the antidumping duty changed circumstances review, in accordance with 19 CFR 351.221(b)(4), and 19 CFR 351.221(c)(3)(i). That notice will set forth the factual and legal conclusions upon which our preliminary results are based and a description of any action proposed. Pursuant to 19 CFR 351.221(b)(4)(ii), interested parties will have an opportunity to comment on the preliminary results of review. In accordance with 19 CFR 351.216(e), the Department will issue the final results of its antidumping duty changed circumstances review not later than 270 days after the date on which the review is initiated, or not later than 45 days if all parties to the proceeding agree to the outcome of the review. This notice is published in accordance with sections 751(b)(l) and 777(i)(l) of the Act and 19 CFR 351.216(b) and 351.221(b)(1). Dated: January 14, 2014 Christian Marsh, Deputy Assistant Secretary, for Antidumping and Countervailing Duty Operations. [FR Doc. 2014-01163 Filed 01/21/2014 at 8:45 am; Publication Date: 01/22/2014] 9