Product Information Product Information. CCFLs, CCFLs, Inverters Inverters & Accessories Accessories

Similar documents
LED Driver Linear / area dimming. Driver LCAI 38/75W TW lp Tunable White

LAMPS & INDICATOR LAMPS

Visualux Designers Guide

INDICATOR LAMPS & LED REPLACEMENT LAMPS

APPLICATIONS. Automatic warehouse. Trasportation lines

Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON

T5, T8, TC-L. PC T5 PRO lp W V 50/60/0 Hz, HO. Electronic ballasts Linear lamps T5, T8 and compact lamps TC-L

3M Sensored Termination (15 kv) QX-T15I-vi1-E

PROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS

1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times

LENGTH LEAD WIRES LENGTH. Lead wires at one end. Lead wires at both ends. See length ordering guide. Standard is 0975(975mm)

PIXEL TOUCH PCB KEEP THIS MANUAL FOR FUTURE NEEDS

System 2000 System 2000 HLK relay insert. 1 Safety instructions. 2 Device components. 3 Function. Order No. : Operating instructions

Assembly Instructions

Capacitive sensor BCT5-S18-UP6X2T-H1151

Photoelectrics Through-beam Type PA18C.T..., DC

-Sharp Telecentric backlight illuminator by EFFILUX

3M Cold Shrink Foldback Splice Jacket Kit

Single Point Flow Monitor SW118 SW119

10 SERIES. Light dependent relays A

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm

PrimaLine 1.5 XT Wet Location LED Tape Light

Directional Couplers and Splitters

LUT Luminescence scanners: Seeing what no-one else can

High performance circuit breakers

INSTALLATION MANUAL FT-FOTR-1VDE-ST-S

Application Note [AN-007] LCD Backlighting Technologies and Configurations

LCS 2 RJ 45 Cat. 6A HD panels and units

PERFORMANCE SPECIFICATION SHEET

MESP TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 400mm 2 ALUMINIUM CONDUCTOR 1.9kV XLPE INSULATED WITHOUT METALLIC SCREEN

21 Channel Light Show PWM LED Controller with Remote Control

LED DRIVERS. LQC4D-V1 4 channels. User Manual FEATURES

Remote Voltage Detector - JET (RVD) Medium and High Voltage kV AC

Cyclo Series. user manual. MartinArchitectural

Dimensions. Electrical Specifications. Environmental Specifications. General Specifications. Mechanical Specifications.

CONTACT-DUO-PROFILE. Contact-Duo-Profile overview

KTC-V300P TV TUNER INSTRUCTION MANUAL B /00 (MV)

INSTRUMENT CATHODE-RAY TUBE

MODELS USIX-024 AND USIX-120 INSTRUCTION SHEET FOR FEDERAL SIGNAL UNISTAT STATUS INDICATOR MODEL USIX

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions

FOUNTAIN LIGHTING. Adding light to your life. atecpool.com

Safety Light Curtains GuardShield

LUXFLEX PREMIUM THIN & FLEXIBLE BACKLIGHTING. Indoor/Outdoor Series

FLUID VIEW 12V LED TAPE LIGHT

(RGBW)

UV Power Monitor. incident light 200 to 370 nm 300 C (Use at temperatures below the Fiber Unit s rated operating

New Microsemi Single CCFL Lamp Inverters. A Series LXMG181x Series = VEasyLIT

Bimetal Temperature Switch

As versatile as your requirements.

TSUBAKI SEAMLESS LIGHT TYPE V

APPLIANCES /// MTA, CST-100 II AND SL-156 CONNECTORS. CONNECTORS/ APPLIANCES MTA, CST-100 II and SL-156 Connectors

Light Curtain Type LA

Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height

Photoelectric Sensors E3F2

INVISILED ACCESSORIES

Operating instructions

Model Number Structure

estat20 Electronic Humidistat with remote sensor head Technical data Electrical data Humidity Temperature +125 C

Dimming actuators GDA-4K KNX GDA-8K KNX

HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/

Figure 1: Device components

Data Sheet Definite Purpose Contactors Ex9CK Series

Channel Controller for Light Show with Remote Control. HomLiCon RCL164R

AK-PVE4 Operating Instructions. Measuring of norm signals in wall-type units. Performance:

Filters for Power Lines (Low Leakage Current)

MCR3 POWER EQUIPMENT. Microprocessor Controlled Constant Current Regulator. Compliance with Standards. Uses. Features

ZN-PD. Smallest Air Particle Sensor in the Industry for In-line Measurement. Air Particle Sensor. Features

XW3D. Simple Wiring of Sensor Actuators. Connector Terminal Boxes. Specifications. Materials and Finish. Connection Combinations

RGB 5050 PixelControl LED Super Flat Rope Part Numbers: PSFR-RGB-W-20

APPLICATIONS. Automatic warehouse. Trasportation lines

We are pleased to quote as follows per your request. Price and delivery informa on is as shown below,

User guide. Preamble. unpacking

Quick Term III. 3M Cold Shrink 3 Core Indoor Termination. 3.3 kv mm 2

LED MODULES READYLINE DL

1 Safety instructions. 2 Device components. 3 Function. Light Management Relay switch insert 2-channel. Art.-No.: 1202 URE.

LUXFLEX STANDARD THIN & FLEXIBLE BACKLIGHTING. Indoor Series

Click & Go. LWL-NE4-Katalog. Click & Go Modular Solutions. Subject to technical changes! 1

EXPlora. Introduction

Brief Description of Circuit Functions

24 Volt RGB/RGA Super Flat LED Rope Part Numbers: SFR-RGB-W, SFR-RGB-B, SFR-RGA-W, SFR-RGA-B

INNOVATION IN MAGNETICS DS3434/5. Mag612. Miniature Three-Axis Fluxgate Probe.

INSTALLATION MANUAL FT-FOTR-8VD-ST-S. 8-Channel Digital Duplex Baseband Video Transmitter and Receiver With Reverse Data Transmission for PTZ Cameras

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment)


Absolute Rotary Encoder E6CP

Cables for robot applications

SERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency

General Specifications

Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements

Electrical connection

INSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN

High Resolution Multicolor Contrast Scanner. Dimensioned drawing

LC2D09E7 REVERSING CONTACTOR 575VAC 9A IEC

Type Contact form Model Ag (Au clad) Standard DPDT G6A-274P-ST-US Low-sensitivity DPDT G6A-274P-ST40-US

Operating Instructions

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

Multi-Touch Resistive Touch Screens

Trends and Challenges of HV Cable Systems

LED Backlight for Technics amplifiers

Transcription:

Specialist suppliers of standard and custom CCFLs and Inverters Product Information Product Information for for CCFLs, CCFLs, Inverters Inverters & Accessories Accessories EEFL data coming soon! www.visualux.com

CCFL styles and UV lamps V isualux are able to supply CCFLs in diameters of 1.8, 2.0, 2.3, 2.6, 3.0, 4.1, 5.0 and 5.75mm. Diameters of 1.8mm from 40 to 280mm long. 2.0/2.3mm are available in lengths of 40 to 300mm. 2.6dia. from 40 to 400mm long and 3.0/5.75dia. 40 to 580mm long. Our CCFLs are supplied, as standard, with Wire Ends. High Voltage silicon cable can be supplied connected to your CCFLs or supplied separately with a suitable inverter connector. Reels of High Voltage cable are also available. Shaped CCFLs Shaped CCFLs are a speciality of Visualux. Minimum order quantities for shaped CCFLs is usually only 100 pcs. and deliveries are normally within 4/5 weeks. Ultra Violet Lamps UV-A lamps, as used in currency authentication equipment, are available at 365Nm and can detect the fluorescing inks and UV sensitive bands as used in many currencies. These UV lamps are available in 3.0 and 4.1Ø and in lengths from 40 to 500mm. Minimum order quantities on non stock sizes are 100 pcs. only. General Advice Very high voltages are generated by the CCFL inverter - all safety precautions must be observed. Avoid having the High Voltage leads crossing over each other or too close together - this can cause capacitance problems that can result in the CCFL looking less bright. Keep the High Voltage leads, that connect the inverter to the CCFL, to a minimum length. Keep metalwork away from the CCFL and Inverter circuit as much as possible, as this can cause capacitance problems that can result in the CCFL looking less bright. In the interests of safety, fit a suitable insulating end cap or sleeving to the connection between the CCFL and High Voltage leads. Page 2

A few of our standard CCFLs (not a definitive list but representative of our stock) If you do not see what you require please ask! Part No. Description Termination Colour Temp. Availability VLXF-50-RGD/3.0 3.0dia. x 50mm long CCFL Wire Ends 8,000k Stock VLXF-86-RGD/3.0 3.0dia. x 86mm long CCFL Wire Ends 8,000k Stock VLXF-100-RGD/4.1 4.1dia. x 100mm long CCFL Wire Ends 8,000k Stock VLXF-100-SYN/4.0 4.0dia. x 100mm long CCFL End caps, leads, connector 6,000k Stock VLXF-120-RGD/4.1 4.1dia. x 120mm long CCFL Wire Ends 8,000k Stock VLXF-150-RGD/4.1 4.1dia. x 150mm long CCFL Wire Ends 8,000k Stock VLXF-160-RGD/4.1 4.1dia. x 160mm long CCFL Wire Ends 8,000k MOQ if no stock VLXF-188-RGD/2.4 2.3dia. x 188mm long CCFL Wire Ends 8,000k Stock VLXF-200-RGD/3.0 3.0dia. x 200mm long CCFL Wire Ends 8,000k Stock VLXF-200-RGD/4.1 4.1dia. x 200mm long CCFL Wire Ends 8,000k Stock VLXF-210-SYN/4.0 4.0dia. x 210mm long CCFL End caps, leads, connector 6,000k MOQ if no stock VLXF-216-RGD/2.6 2.6dia. x 216mm long CCFL Wire Ends 8,000k Stock VLXF-216-RGD/3.0 3.0dia. x 216mm long CCFL Wire Ends 8,000k Stock VLXF-216-SYN/4.0 4.0dia. x 216mm long CCFL End caps, leads, connector 6,000k Stock VLXF-218-RGD/3.0 3.0dia. x 218mm long CCFL Wire Ends 8,000k MOQ if no stock VLXF-220-RGD/2.4 2.3dia. x 220mm long CCFL Wire Ends 8,000k Stock VLXF-220-RGD/4.1 4.1dia. x 220mm long CCFL Wire Ends 8,000k Stock VLXF-220-SYN/4.0 4.0dia. x 220mm long CCFL End caps, leads, connector 6,000k Stock VLXF-232-RGD/4.1 4.1dia. x 232mm long CCFL Wire Ends 8,000k MOQ if no stock VLXF-240-RGD/2.4 2.3dia. x 240mm long CCFL Wire Ends 8,000k MOQ if no stock VLXF-240-RGD/3.0 3.0dia. x 240mm long CCFL Wire Ends 8,000k Stock VLXF-246-RGD/3.0 3.0dia. x 246mm long CCFL Wire Ends 8,000k MOQ if no stock VLXF-250-RGD/2.6 2.6dia. x 250mm long CCFL Wire Ends 8,000k Stock VLXF-250-RGD/3.0 3.0dia. x 250mm long CCFL Wire Ends 8,000k Stock VLXF-252-RGD/4.1 4.1dia. x 252mm long CCFL Wire Ends 8,000k Stock VLXF-254-RGD/2.3 2.3dia. x 254mm long CCFL Wire Ends 8,000k Stock VLXF-258-RGD/2.4 2.3dia. x 258mm long CCFL Wire Ends 8,000k Stock VLXF-266-SYN/4.0 4.0dia. x 266mm long CCFL End caps, leads, connector 6,000k Stock VLXF-300-RGD/2.6 2.6dia. x 300mm long CCFL Wire Ends 8,000k Stock VLXF-300-RGD/3.0 3.0dia. x 300mm long CCFL Wire Ends 8,000k Stock VLXF-300-RGD/3.0/Blue/ELC 3.0dia. x 300mm long CCFL End caps, leads, connector Blue Stock VLXF-300-RGD/3.0/Green/ELC 3.0dia. x 300mm long CCFL End caps, leads, connector Green Stock VLXF-300-RGD/3.0/Red/ELC 3.0dia. x 300mm long CCFL End caps, leads, connector Red Stock VLXF-300-SYN/4.0 4.0dia. x 300mm long CCFL End caps, leads, connector 6,000k Stock VLXF-315-RGD/2.6 2.6dia. X 315mm long CCFL Wire Ends 8,000k Stock VLXF-360-RGD/3.0 3.0dia. x 360mm long CCFL Wire Ends 8,000k Stock VLXF-360-SYN/3.0 3.0dia. x 360mm long CCFL End caps, leads, connector 8,000k Stock VLXF-420-RGD/3.0 3.0dia. x 420mm long CCFL Wire Ends 8,000k Stock VLXF-420-RGD/4.1 4.1dia. x 420mm long CCFL Wire Ends 8,000k MOQ if no stock VLXF-600-RGD/3.0 3.odia. X 600mm long CCFL Wire Ends 8,000k Stock Colour temperature (k) is +/- 10% MOQ if no stock = If no stock is available Minimum Order Quantities apply (usually 100 pcs.) Stock = Parts usually available from stock depending on quantity required Custom lengths available normal MOQ = 100pcs. ONLY! Shaped CCFLs are a speciality of Visualux Page 3

Drive Inverters for CCFLs Custom designs welcome please enquire! Inverter Lamps Input L x W x H (mm) CCFL Length(mm) Minimum Order Notes VLXINV-4152 1 9vDC 58.5 x 21 x 11.5 50-150 100 VLXINV-4252 1 9vDC 58.5 x 21 x 11.5 151-250 100 VLXINV-4352 1 9vDC 58.5 x 21 x 11.5 251-350 100 VLXINV-4452 1 9vDC 58.5 x 21 x 11.5 351-420 100 VLXINV-41022 2 9vDC 70 X 21 X 12.5 50-150 100 VLXINV-42022 2 9vDC 70 X 21 X 12.5 151-250 100 VLXINV-43022 2 9vDC 70 X 21 X 12.5 251-350 100 VLXINV-8002 1 8-20vDC 80 x 20 x 9.0 50-300 1 Dimming VLXINV-4151 1 5vDC 58.5 x 21 x 11.5 50-150 100 VLXINV-4251 1 5vDC 58.5 x 21 x 11.5 151-250 100 VLXINV-4351 1 5vDC 58.5 x 21 x 11.5 251-350 100 VLXINV-4451 1 5vDC 70 X 21 X 12.5 351-420 100 VLXINV-41012 2 5vDC 70 X 21 X 12.5 50-150 100 VLXINV-42012 2 5vDC 70 X 21 X 12.5 151-250 100 VLXINV-43012 2 5vDC 70 X 21 X 12.5 251-350 100 VLXINV-44012 2 5vDC 70 X 21 X 12.5 351-420 100 VLXINV-4154 1 24vDC 58.5 x 21 x 11.5 50-150 100 VLXINV-4254 1 24vDC 58.5 x 21 x 11.5 151-250 100 VLXINV-4354 1 24vDC 58.5 x 21 x 11.5 251-350 100 VLXINV-4454 1 24vDC 70 X 21 X 12.5 351-420 100 VLXINV-41042 2 24vDC 70 X 21 X 12.5 50-150 100 VLXINV-42042 2 24vDC 70 X 21 X 12.5 151-250 100 VLXINV-43042 2 24vDC 70 X 21 X 12.5 251-350 100 VXINV-44042 2 24vDC 70 X 21 X 12.5 351-420 100 VLXINV-4153 1 12vDC 58.5 x 21 x 11.5 50-150 1 VLXINV-4253 1 12vDC 58.5 x 21 x 11.5 151-250 1 VLXINV-4353 1 12vDC 58.5 x 21 x 11.5 251-350 1 VLXINV-4453 1 12vDC 70 X 21 X 12.5 351-420 1 VLXINV-4603 2 12vDC 420-600 1 VLXINV-41032 2 12vDC 70 X 21 X 12.5 50-150 1 VLXINV-42032 2 12vDC 70 X 21 X 12.5 151-250 1 VLXINV-43032 2 12vDC 70 X 21 X 12.5 251-350 1 VLINV-44032 2 12vDC 70 X 21 X 12.5 351-420 1 VLXINV-4035 2 12vDC 420-680 1 VLXINV-4036 2 12vDC 680-800 1 VLXINV-1502U 2 115/230VAC 160 x 22 x 17 50-150 1 VAC Input! VLXINV-3002U 2 115/230VAC 160 x 22 x 17 151-300 1 VAC Input! VLXINV-4202U 2 115/230/VAC 160 x 22 x 17 301-420 1 VAC Input! VLXINV-LT- 4202U-10mA 2 115/230/VAC 160 x 22 x 17 301-420 1 VACINV-363 2 115/230/VAC 262 x 35 x 19 <363mm long 1 VACINV-458 2 115/230/VAC 262 x 35 x 19 <458mm long 1 VACINV-558 2 115/230/VAC 262 x 35 x 19 <558mm long 1 VACINV-608 2 115/230/VAC 262 x 35 x 19 <608mm long 1 VACINV-658 2 115/230/VAC 262 x 35 x 19 <658mm long 1 VACINV-758 2 115/230/VAC 262 x 35 x 19 <758mm long 1 VAC Input! 10mA Output w ith Pre-Heat Circuit EEFL data coming soon! Page 4

NO LONGER AVAILABLE Drive Inverters for CCFLs Custom designs welcome please enquire! VLXINV-8000 - Output for maximum of 8 CCFLs 12vDC Input with configurable output depending on current and voltage required. On board On/Off and PWM Dimming Circuit (controlled by logic or potentiometer). Low power consumption in standby mode. Dimming Ratio >250:1 EEFL data coming soon! Page 5

Accessories High quality Silicon Rubber coated High Voltage Wire for CCFLs Rated up to 3KV DC at 150 o C. 22 AWG (22/0.14). Nominal O/D 1.65mm. 50m and 610m rolls available. Standard colour: White - Others colours available to order. End Caps Silicon Rubber protective end caps available for 2.6, 3.0, 4.0mm Ø CCFLs. Others sizes to special order. We also have heat shrink tubing available. Cable and PCB connectors A variety of connectors are available for the H.V. cable and we can also supply the matching female housing for your PCBs. If you have special termination requirements please enquire! Flashing Unit Our 12vDC flasher units have adjustments for both On and Off,variable from approx. 0.3-3 seconds. These are available as single or double output models and were primarily designed for use with our CCFLs where a flashing lamp would be particularly effect on a point of sale display. Our flasher units can also be used on other devices that use a 12vDC input power source. Visualux reserve the right to change specifications without prior notice. Page 6