RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael 48 UTP Patch Panel Feature Front-mounted Patching Switche connect port internally, dramatically reducing the need for patch cord Compatible to Unhielded Twited Pair (UTP) cabling ytem High performance panel that upport Category 6 performance pecification up to 250 MHz Conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2 nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Cla E. Simple, labor aving aembly andd intallation uing 110 termination tool Enhanced cable retention fixture Support 48 port, uing 2U of rackk pace Compatible with 22-26 AWG Solidd or tranded wire cable High durability and reliability PatchView and non PatchView option Patent pending Patch Panel( with Dataheet Page 1 of 9
RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael 48 UTP Patch Panel Feature CLASSix RiT UTP Patch Panel aree part of the RiT x Cabling Sytem, featuring Category 6 performance. The ytem i deigned to Conform to ANSI/TIA/EIA- 6/Cla E. 568-B.2-1, ISO/IEC 11801 2 nd edition (2002) and CENELEC EN50173 (2002) for Category PatchView Capability UTP witching panel, when ued in conjunction with RiT' PatchView Solution provide valuable connectivity information about the entire network to the PV4E management oftware. LED indicator on panel identify any twoo port patched together and enable 100% accurate Move, Add and Change. With it unique automated detection, LED-guided connection, and web-baed remote maintenance capabilitie, PV4E enable real-time, centralized management and troublehooting for even the mot dipered network. Patch Panel( with Dataheet Page 2 of 9
RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael 48 UTP Patch Panel Decription The 48 UTP Patch Panel offer an innovative high h qualityy olution that i made to lat. The robut ytem ignificantly reduce the need forr patch cord while exceeding all Category 6 performance requirement. The 48 UTP Patch Panel conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category C 6/ /Cla E. Patch Panel( with Dataheet Page 3 of 9
48 UTP Patch Panel Specification Interface Front Interconnection (patch cordd ide) 48 eight-poition or nine-poition RJ-45 unhielded modular jack. Ue of patch cord with RiT CLASSix RJ-45 plug i recommended. Back Interconnection (cabling ide) 48 eight-poition 110 tool-compatiblefor up to a minimum of 200 re-terminationn cycle. block; accept 22 to 26 AWG wire, olid or tranded. Rated Note: Termination tool mut be ordered eparately. Interconnection to RiT' PatchView ytem - PV Panel - Two 26-pin header on the back of the panel are ued for connection to the PV or PVMax Scanner. Ue two Group A Scanner AttachmentA t Cord according to the required length. RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael - PVMax Panel - Two 14-pin header on the back of the panel are ued forr connection to the PVMax Scanner. Ue one Group B Scanner S Attachment Cord according to the required length - The canning ignal i tranmitted over pin 9 of the RJ-45. Pin 9 exit in nine- poition RJ-4patch cord SMART Jumper, including an extra wire andd pecial RJ-45 plug i needed. Pleae refer to the PatchView Sytem and thee Copper Cable and Cord ection of the e-catalog for further detail. jack and plug deign, ued for thee patch panel model. A pecial Indicator (in model adapted to PatchView only) Port identification indicator - 48 red LED. A pair of activated LED identifie connected port. A ingle port can be identified and the correpondingg LED activated by a remote r control command from the network management tation. Patching Switche 24 Patching Switche for internal. When witched to "PATCH" poition - upper and lower port are connected. When witched to "OFF" poition - upper and lower port are diconnected. Eight wire and thee ninth canning wire (when applicable) of each port are imultaneouly witched. The witch i of uperior quality and i qualified per military tandard. Patch Panel( with Dataheet Page 4 of 9
RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael 48 UTP Patch Panel Specification Electrical Specification Category 6 Standardd Performance Requirement Conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2 nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Cla E. Meet all link and channel requirement UL 1836 lited Electrical Specification Patch Panel h NEXT ratio plot i hown for wort pair combination. The following are typical NEXT meaurement reult at 100, 200 and 250 MHz for all pair combination. Pair 12-36 12-45 12-78 36-45 36-78 45-78 NEXT (db) 100 MHz 200 MHz 250 MHz -60.21-48 -51.29-46.62-60.39-51.19-48.67-44.31-47.2-53.6-49.05-42.3-51.77-46.44-47.82-44.15-46.32-41.07 All pair combination exceed Category 6 requirement. Patch Panel( with Dataheet Page 5 of 9
RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael 48 UTP Patch Panel Specification ELFEXT ratio plot i hown for wort pair combination. The following are typical ELFEXT meaurement reult at 100, 200 and 250 MHz for all pair combination. Pair 12-36 12-45 12-78 36-45 36-78 45-78 ELFEXT (db) -41.78-32.95-31.64-40.55-41.41-28.51-52.65-24.51-28.27-36.5-29.54-28.16-42.06-36.24-31.04-43.51-34.96-35.15 All pair combination exceed Category 6 requirement. Return Lo ratio plot i hown for wort pair. The following are typical Return Lo meaurement reult at 100, 200 and 250 MHz for all pair. Pair 1-2 3-6 4-5 7-8 Return Lo (db) -21.44-16.66-14.62-19.62-17.39-15.98-21.35-16.38-14.96-18.71-14.95-13.61 All pair exceed Category 6 requirement Patch Panel( with Dataheet Page 6 of 9
RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael 48 UTP Patch Panel Specification Inertion Lo ratio plot i hown for wort pair. The following are typical meaurement reult at 100, 200 and 250 MHz for all pair. Inertion Lo Pair 1-2 3-6 4-5 7-8 Inertion Lo (db) -16.07-23.34-25.76-16.95-24.32-27.44-16.88-24.46-27.16-15.57-22.42-26.17 All pair exceed Category 6 requirement. Power Sum NEXT ratio plot i hown for wort pair combinatio n. The following are typical Power Sum NEXT meaurement reult at 100, 200 and 250 MHz M for all pair combination. Pair 1-2 3-6 4-5 7-8 Power Sum NEXT (db) -50.31-44.47-41.57-49.22-43.82-40.19-45.48-41.39-37.59-46.18-41.63-39.19 All pair combination exceed Category 6 requirement. Patch Panel( with Dataheet Page 7 of 9
RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael 48 UTP Patch Panel Specification Power Sum ELFEXT ratio plot i hown for wort pair combination. The following are typical Power Sum ELFEXT meaurement reult at 100, 200 and 250 MHz for all pair combination. Pair 1-2 3-6 4-5 7-8 Power Sum ELFEXT (db)( -37.96-23.86-24.45-34.53-27.31-25.23-34.48-28.23-24.89-39.5-23.88-25.88 All pair combination exceed Category 6 requirement. General Patch Panel( with Dataheet Phyical Height: 88.10 mm / 1.76" (2U) Width: 482.6 mm / 19" " Depth: 56.10 mm / 2.2" Retention Fixture: 89.10 mm / 3.5" Weight: 0.7kg Material Steel Color Black background with gray ilk creened marking Environment Temperature:-20 to 60 C Humidity: 0-90% non-condening Compliance with International EMC Standard: The UTP 48 line of patch panel i deigned to comply with EN-55022, Cla B (Europe) and FCC Part 15, Subpart J, Cla A (USA). Page 8 of 9
RiT Technologie Ltd. Tel Aviv, 69719, 6 Irael 48 UTP Patch Panel Ordering Information Number Decription R3241000 UTP Panel, 48, Switche R3241004 UTP Panel, 48, Switche, PVMax Patch Panel( with Dataheet Page 9 of 9