Lightweight Low Fire Hazard Cables according to part 28 Marine application profile with cross-reference to, parts 61 to 66
VG-CABLE TE Connectivity YOUR PARTNER FOR INNOVATION TE Connectivity is a leading global supplier of engineered electronic components, network solutions, specialty products and undersea telecommunication systems to customers in more than 150 countries. The Aerospace, Defense & Marine Business Unit supplies components which are used in both space and deep sea applications and which are adapted to the specific environmental conditions. With our global sales, engineering, production and logistics network, we actively support the development of new airplanes, ships and defense solutions for our customers and their supplier industries in a global organizational framework. The product portfolio includes passive electronic components, such as cables, connector systems and relays as well as harness protection systems geared to match the most demanding military and civilian profiles. n Areas of application l Passive electronics inside the box l Box input/output and box chassis products l Products for environmental-controlled conditions within the platform l Products for hazardous areas Aerospace, Defense & Marine main PRODUCT GROUPS Connectors and Backshells Wire and Cable Relays and Contactors Engineered Polymer solutions Reliable and innovative products n Global sourcing with one stop shop capabilities n Technology access to all TE developments worldwide n Ability for specific product customization from military specifications and high-end commercial products n Cooperation for new industry standards n Manufacturing cooperation n Inventory management n Offset programs n Design-to-cost
Contents Introduction 2 part 28 type C and E cables 3 System compatibility 5 Primary wire technical description 6 Cable color coding 7 Marking on cable sheath 7 VG-CABLE Wire coding for part 28 type C and E cables 8 Cross-reference to parts 61 to 66 11 Cable type overview 13 This document is a product presentation, issued by TE Connectivity, a member of the VG Cable Technical Committee of Normenstelle Elektrotechnik (public agency for electrotechnical standards). This document was prepared to the best of our knowledge. In the case of any discrepancy in this brochure, the original VG standard prevails. Literature number: 1654420-1 01-13 1
VG-CABLE Introduction This document shows the conformity of our products with the standard series part 28 the copyright of which is held by Bundesamt für Wehrtechnik und Beschaffung (Federal Office of Defense Technology and Procurement) (BWB). The part 28 type C and E standard series covers halogen-free cables with a low fire hazard. It has been developed in accordance with the state of the art in cabling techniques with thin-wall insulation for primary wires and an optimized cable design process in the interest of minimum weight and diameter. In the past, cables from the part 60 to 66 standard series were used for marine applications. The standard series was drafted many years ago and technical development in the electronics sector led to changes in shipbuilding. State of the art electronics is used in an effort to address the increasing demands on the functionality and tasks of military vessels. The result is an increasingly extensive and complex structure of power supply systems, electronic systems and networks which must be connected by a cabling system that should be as efficient and reliable as possible. Furthermore, the demand for lighter and/or smaller cable diameters is becoming more and more important. Through technical improvement in the following sectors, a crucial development step was achieved with the parts C and E standard series which reflects both new requirements in shipbuilding and empirical values from the past. Significantly increased service life Long-term resistance to environmental influences Reduction in weight and diameter Increased EMC requirements This documentation contains technical specifications of cables according to part 28 type C and type E as alternatives to parts 61 to 66 of the standard series. The range of tests for cables according to part 28 types C and E was adapted to the requirements of modern marine equipment. In addition to electrical and mechanical requirements, it also fulfils the specifications for limiting fire hazards thanks to the following properties: halogen free flame retarded low smoke generation low corrosivity of combustion gases low toxicity of combustion gases The part 28 standard series was approved for use in marine applications and is additionally also suitable for further military applications. 2 Literature number: 1654420-1 01-13
part 28 type C and E cables The part 28 standard generally covers a range of different cable types for various applications. The cables types are classified as types A, B, C, D and E, including relevant test requirements. part 2 addresses the standards (national and international standards are referred to, such as DIN, EN, IEC, etc.) which are applied in the individual tests section. Halogen-free cables with improved performance under fire conditions are specified for marine applications. Cables fulfilling these requirements belong to types C and E. More than 100 different cable designs are currently available as type C (single outer screen) cables (C001 to C122). Type E (double outer screen) currently includes a range of 88 designs numbered from E001 to E011. The types of cables which can be directly compared with parts 61-66 are specified in part 28 under part nos. C033 to 122 and E004 to E011. VG-CABLE Only these designs are described in this document. Although all other designs of types C and E fulfill similar requirements, they differ significantly in terms of cable layout, number of wires, conductor cross-sections and combination of primary wires because they were customized to reflect a specific application. Literature number: 1654420-1 01-13 3
VG-CABLE part 28 type C and E cables Cables approved according to part 28 types C and E include primary wires, components and sheath materials which were approved and licensed individually and independent of each other according to the applicable design standards. Every design standard contains test requirements for electrical and mechanical parameters, as well as criteria concerning resistance to fluids and improved performance in the case of fire. part 28 C and E cables include: Primary wires, specified in component standard part 20 type E. Available in cross-sections of 0.15 mm 2 to 3.0 mm 2 in 11 different colors, including green/ yellow. The primary wires can be used as components in cables and for wiring units or cabinets. Unscreened cable components - in pairs, triples and quads as specified in the component standard part 21 type C. Part 21 type E elements include part 20 type E primary wires and additionally define different color combinations of primary wires. Screened cable components - in pairs, triples and quads as specified in component standard part 23 type C component standard. Part 23 type G elements include part 21 type C elements. Elements defined in color are screened and protected by a wrap. These elements can only be used as components in cables. The sheath material and the complete cable are specified in component standard part 28 types C and E which includes both the cable design specifications as well as the complete test specifications for the complete cable and cable sheath. The V95218 part 28 standard series features a modular approach which enables the free design and definition of a cable configuration according to the user s requirements using tested and approved cable elements according to parts 20 to 23. 4 Literature number: 1654420-1 01-13
System compatibility Cables according to part 28 types C and E fulfill the requirements of the VG95214 part 14 standard where the individual VG-approved sheath materials are tested for system compatibility as an integrated system. This means that the cable sheath is tested together with halogen-free heat-shrinkable endcaps of all VG-approved manufacturers and the appropriate glue. This reflects gluing capability with halogen-free, heat-shrinkable endcaps, VG95343 part 5 type L and halogen-free molded parts according to VG95343 part 29 (connector housings) and part 30 (branches). This is illustrated by the diagram below: Low fire hazard harness system VG-CABLE Cables & wires VG95343 Heat shrink T20 E Primary wire (PW) T22 D PW screened Endcaps VG95343 T29 Branches VG95343 T30 Tubings VG95343 T05 Type A Type A Type L T21 C Open bundle T23C&G Screened component 202K -01 one lip 322A Type B Type B T27 A T28C&E 202K -02 two lips 342A unscreened screened Type C Type C 202K three lips 382A Type D Type D 222K 462A Molded part/cable T14 combination D 2/1 Molded part/tubing T14 combination D 2/2 VG95343 T14 system compatibility Literature number: 1654420-1 01-13 5
VG-CABLE Primary wire technical description Primary wires, specified in part 20 type E Part Conductor Qty./diameter Conductor Cable Conductor number cross-section of primary wires diameter, max. diameter, nom. resistance, max. -T20 mm 2 mm mm mm Ohm/km 12* 0.15 19/0.10 0.55 1.03 135 01* 0.25 19/0.13 0.66 1.14 84.4 02* 0.4 19/0.16 0.84 1.33 50.5 03* 0.5 19/0.18 0.94 1.4 40.1 04* 0.6 19/0.20 1.04 1.52 31.1 05* 0.75 19/0.23 1.2 1.6 26.7 06* 1 19/0.25 1.32 1.75 20 07* 1.2 19/0.29 1.47 1.93 15.3 08* 1.5 37/0.23 1.68 2.08 13.7 09* 2 37/0.25 1.87 2.36 10.5 10* 2.5 37/0.29 2.14 2.55 8.21 11* 3 37/0.32 2.29 2.78 6.58 The asterisk symbol* in the part number (e.g. -T20-E01*) is replaced by the insulation color code as follows: 0 = black; 1 = brown; 6 = blue; 8 = grey; 9 = white; G = green/yellow. These are the standard colors used in marine cables. Further colors are available and defined in the VG95217-T20 type E component standard. 6 Literature number: 1654420-1 01-13
Cable color coding Depending on the given standard, the individual components shown in the cable designs, are either given consecutive numbers or color codes according to the following standard pattern: 0 = black 1 = brown 2 = red 3 = orange 4 = yellow 45 = yellow/green 5 = green 6 = blue 7 = violet 8 = grey 9 = white VG-CABLE Cable sheath marking According to VG requirements, the cable sheath must show the manufacturer s name, the VG number, the VDE registration number and the manufacturer code for identification and packaging purposes. Additional information may be printed which is useful in determining the cable configuration: Example: L Lightweight cable F - Telecommunications cable M - Marine cable G - Insulation or sheath S - Screen O - No defined functional integrity in the case of fire Cable marking example: Raychem -T28-C050 VDE Reg. Nr. 7095 K1010 FMGSGO (4 x 2 x 0.75) Literature number: 1654420-1 01-13 7
VG-CABLE Wire coding for part 28 type C and E cables The color codes shown below are exclusively applicable to part 28 type C and E part numbers which are defined as direct alternatives to parts 61 66. Other part numbers from parts 28 C and E chiefly include wires with white insulation and number printing. A) Cables overall screen 1.5 mm 2 and 2.5 mm 2 table 1 (LMGSGO) Cables with green/yellow earth wire 3-wire: blue, brown, green/yellow 5-wire: blue, brown, black, grey, green/yellow 7 to 10-wire: green/yellow (in outer layer), all other black with white numbers, counting from the center towards the outside Cables without green/yellow earth wire 2-wire: black, blue 3-wire: black, blue, brown 4-wire: black, grey, blue, brown 5-wire: brown, black, grey, black, blue 7-wire and more: white with black numbers, counting from the center towards the outside B) Cables overall screen with unscreened twisted pairs 0.75 mm 2 and 1.00 mm 2 table 2 (FMGSGO) 2-pair cable (2 pairs = 1 star quad) Black, blue, grey, brown (black and gray opposite each other) 4-pair cable (4 pairs = 2 star quads) 1 st pair: black, blue 2 nd pair: black, brown 3 rd pair: black, grey 4 th pair: black, grey 6 to 16-pair cable (3 to 8 star quads) Each star quad: black, blue, grey, brown (black and grey opposite each other) C) Cables overall screen with screened pairs 0.75 mm 2 table 3 (FMSGSGO) 2-pair cable (2 pairs = 1 star quad) 1 st pair: black, blue 2 nd pair: black, brown 4 to 24-pair cable, valid for any layer 1 st pair: black, blue (pilot and direction) 2 nd pair: black, brown (counting direction) 3 rd and following pairs: black, grey Position of pairs for start and counting direction identical in every wire layer. 8 Literature number: 1654420-1 01-13
Wire coding for part 28 type C and E cables D) Cables overall screen with unscreened twisted pairs 0.4 mm 2 table 4A (LFMGSGO) 2-pair cable (2 pairs = 1 star quad) Black, blue, grey, brown (black and grey opposite each other) 4 to 54-pair cable, valid for every layer 1 st pair: black, blue (pilot and direction) 2 nd pair: black, brown (counting direction) 3 rd and following pairs: black, grey Position of pairs for start and counting direction identical in every wire layer. E) Cables double screened twisted pairs 0.4 mm 2 table 4B (LFMGSSGO) 2-pair cable (2 pairs = 1 star quad) Black, blue, grey, brown (black and grey opposite each other) VG-CABLE 4 to 54-pair cable, valid for every layer 1 st pair: black, blue (pilot and direction) 2 nd pair: black, brown (counting direction) 3 rd and following pairs: black, grey Position of pairs for start and counting direction identical in every wire layer. F) Cables screened triples 0.4 mm 2 table 4C (LFMGSGO) Three-wire cables with color-coded element coding for the counting direction Black, white and green/yellow 3 to 44 three-wire cable, valid for every layer 1 st pair: red element coding (pilot and direction) 2 nd pair: green element coding (counting direction) Position of pairs for start and counting direction identical in every wire layer. G) Cables overall screen with screened twisted pairs 0.4 mm 2 table 5A (LFMSGSGO) In every wire layer 1 st pair: black, blue (pilot and direction) 2 nd pair: black, brown (counting direction) 3 rd and following pairs: black, grey Position of pairs for start and counting direction identical in every wire layer. Literature number: 1654420-1 01-13 9
VG-CABLE Wire coding for part 28 type C and E cables H) Cables overall screen with screened twisted pairs 0.25 mm 2 table 5B (LFMSGSGO), including multi-wire cable 3 x 2 x 1.2 + 18 x 2 x 0.25 Wire and star quad 0.25 mm 2 For every cable layer 1 st star quad: black, white, grey, blue, element coding: red (pilot and direction) 2 nd star quad: black, white, grey, blue, element coding: green (counting direction) 3 rd star quad: black, white, grey, blue Wire and pair coding for cables 3 x 2 x 1.2 + 18 x 2 x 0.25 Wires in each pair: black, white Pair coding 1 st pair with 1.2 mm 2 : red 2 nd pair with 1.2 mm 2 green 3 rd pair with 1.2 mm 2 : transparent For every layer 1 st pair with 0.25 mm 2 : red (pilot and direction) 2 nd pair with 0.25 mm 2 : green (counting direction) 3 rd and following pairs with 0.25 mm 2 : nature Position of pairs for start and counting direction identical in every wire layer. I) Cables double screened twisted triples table 6 (LFMSGSSGO) Wires in 3-wire element: Black, white, grey Element coding in each layer 1 st element: red 2 nd element: green 3 rd element: transparent 10 Literature number: 1654420-1 01-13
Cross-reference list for parts 61 to 66 Number of wires x new VG numbers old VG numbers nominal cross-section VG 95218 T28 VG 95218 T61 to 66 LMGSGO T28 T61 (2 x 1.5) C033 (old), C083 (new)* A001 (old), A016 (new) (3 x 1.5) C035 (old), C122 (new)* A002 (old), A021 (new) (4 x 1.5) C042 (old), C088 (new)* A003 (old), A025 (new) (5 x 1.5) C044 (old), C090 (new)* A004 (old), A027 (new) (7 x 1.5) C046 A005 (10 x 1.5) C052 A006 (12 x 1.5) C055 A007 (14 x 1.5) C058 A008 (16 x 1.5) C060 A009 (19 x 1.5) C061 A010 (24 x 1.5) C065 A011 (27 x 1.5) C066 A012 (33 x 1.5) C070 A013 (37 x 1.5) C005 A018 (3G1.5) C036 (old), C085 (new)* A102 (old), A022 (new) (5G1.5) C045 (old), C091 (new)* A104 (old), A028 (new) (7G1.5) C047 A105 (10G1.5) C053 A106 (2 x 2.5) C034 (old), C084 (new)* A014 (old), A020 (new) (3 x 2.5) C037 (old), C086 (new)* A015 (old), A023 (new) (4 x 2.5) C043 (old), C089 (new)* A016 (old), A026 (new) (7 x 2.5) C048 A017 (3G2.5) C038 (old), C087 (new)* A115 (old), A024 (new) FMGSGO T28 T62 (1 x 2 x 0.75) C032 (old), C082 (new)* A008 (2 x 2 x 0.75) C040 A001 (4 x 2 x 0.75) C050 A002 (6 x 2 x 0.75) C054 A003 (8 x 2 x 0.75) C059 A004 (10 x 2 x 0.75) C062 A005 (14 x 2 x 0.75) C067 A006 (16 x 2 x 0.75) C069 A007 (1 x 2 x 1.0) C092 A009 (2 x 2 x 1.0) C099 A010 (4 x 2 x 1.0) C104 A011 (6 x 2 x 1.0) C106 A012 (8 x 2 x 1.0) C108 A013 (10 x 2 x 1.0) C109 A014 (14 x 2 x 1.0) C111 A015 (16 x 2 x 1.0) C113 A016 VG-CABLE * Harmonization on the European market was implemented as a result of a change in wire color harmonization on the basis of DIN VDE 0293-308. This also necessitated a modification of VG Kabel. Literature number: 1654420-1 01-13 11
VG-CABLE Cross-reference list for parts 61 to 66 Number of wires x new VG numbers old VG numbers nominal cross-section VG 95218 T28 VG 95218 T61 to 66 FMSGSGO T28 T63 (2 x 2 x 0.75) C041 A001 (4 x 2 x 0.75) C051 A002 (7 x 2 x 0.75) C057 A003 (11 x 2 x 0.75) C063 A004 (14 x 2 x 0.75) C068 A005 (19 x 2 x 0.75) C072 A006 (24 x 2 x 0.75) C074 A007 LFMGSSGO T28 T64 (2 x 2 x 0.4) E004 A001 (4 x 2 x 0.4) E005 A002 (7 x 2 x 0.4) E006 A003 (12 x 2 x 0.4) E008 A004 (19 x 2 x 0.4) E010 A005 (27 x 2 x 0.4) E011 A006 (30 x 2 x 0.4) LFMGSGO C076 B001 (45 x 2 x 0.4) LFMGSGO C077 B002 LFMGSGO T28 T64 (30 x 2 x 0.4) C076 B001 (45 x 2 x 0.4) C077 B002 (3 x 3 x 0.4) C105 D001 (5 x 3 x 0.4) C107 D002 (7 x 3 x 0.4) C110 D003 (10 x 3 x 0.4) C112 D004 (12 x 3 x 0.4) C114 D005 (14 x 3 x 0.4) C115 D006 (19 x 3 x 0.4) C116 D007 (24 x 3 x 0.4) C117 D008 (30 x 3 x 0.4) C118 D009 (37 x 3 x 0.4) C119 D010 (44 x 3 x 0.4) C121 D011 LFMSGSGO T28 T65 (2 x 2 x 0.4) C039 A001 (4 x 2 x 0.4) C049 A002 (7 x 2 x 0.4) C056 A003 (12 x 2 x 0.4) C064 A004 (19 x 2 x 0.4) C071 A005 (27 x 2 x 0.4) C075 A006 (3 x 2 x 1.2 und 18 x 2 x 0.25) C073 B001 (27 x 4 x 0.25) C078 C001 LFMSGSSGO T28 T66 (5 x 3 x 0.4) E007 A001 (12 x 3 x 0.4) E009 A002 12 Literature number: 1654420-1 01-13
Overview of cable types for part 28 type C and E LMGSGO part 28 C 14 Cables overall screen Table 1 FMGSGO part 28 C 15 Cables overall screen with unscreened twisted pairs Table 2 FMSGSGO part 28 C 16 Cables overall screen with screened pairs Table 3 VG-CABLE LFMGSGO part 28 C 17 Cables overall screen with unscreened twisted pairs Table 4A LFMGSSGO part 28 E 18 Cables double screened twisted pairs Table 4B LFMGSGO part 28 C 19 Cables screened triples Table 4C LFMSGSGO part 28 C 20 Cables overall screen with screened twisted pairs Table 5A, Table 5B LFMSGSSGO part 28 E 21 Cables double screened twisted triples Table 6 Literature number: 1654420-1 01-13 13
VG-CABLE LMGSGO part 28 C Cables overall screen Example: T28 C061 Table 1 LMGSGO Cables overall screen 1.5 mm 2 and 2.5 mm 2 Number of VG ref. no. Cable bundle Nominal Wall Cable Weight Resiswires x nominal diameter diameter of thickness diameter tance cross-section screened wire of sheath at 20 C mm 2 T28 mm AWG mm mm mm mm kg/km Ohm/km nom. min. min. min. max. max. max. 2 x 1.5 C033+C083 4.9 36 0.13 0.7 6.2 6.8 94 14.1 3 x 1.5 C035+C122 5.2 36 0.13 0.7 6.5 7.1 112 14.1 4 x 1.5 C042+C088 5.8 34 0.16 0.7 7.0 7.8 135 14.1 5 x 1.5 C044+C090 6.3 36 0.13 0.7 7.6 8.4 156 14.1 7 x 1.5 C046 6.9 36 0.13 0.7 8.0 8.8 196 14.1 10 x 1.5 C052 9.1 34 0.16 0.8 10.2 11.2 273 14.1 12 x 1.5 C055 9.5 34 0.16 0.8 10.6 11.6 309 14.6 14 x 1.5 C058 10.0 34 0.16 0.8 11.1 12.1 358 14.6 16 x 1.5 C060 10.6 34 0.16 0.8 11.5 12.7 402 14.6 19 x 1.5 C061 11.2 34 0.16 0.8 12.1 13.3 456 14.6 24 x 1.5 C065 13.5 32 0.20 0.7 14.2 15.6 585 14.1 27 x 1.5 C066 13.8 32 0.20 0.8 14.5 15.9 640 14.1 33 x 1.5 C070 14.9 32 0.20 0.9 15.6 17.2 760 14.1 37 x 1.5 C005 15.6 32 0.20 1.0 18.2 19.2 868 14.6 3G1.5 C036+C085 5.2 36 0.13 0.7 6.5 7.3 112 14.1 5G1.5 C045+C091 6.3 36 0.13 0.7 7.6 8.4 156 14.1 7G1.5 C047 6.9 36 0.13 0.7 8.0 8.8 196 14.1 10G1.5 C053 9.1 34 0.16 0.8 10.2 11.2 273 14.6 2 x 2.5 C034+C084 5.8 36 0.13 0.7 7.1 7.7 126 8.46 3 x 2.5 C037+C086 6.2 36 0.13 0.7 7.5 8.1 151 8.46 4 x 2.5 C043+C089 6.9 36 0.13 0.7 8.0 9.0 186 8.46 7 x 2.5 C048 8.5 34 0.16 0.7 9.5 10.3 278 8.46 3G2.5 C038+C087 6.2 36 0.13 0.7 7.5 8.1 151 8.46 G: green/yellow 14 Literature number: 1654420-1 01-13
FMGSGO part 28 C Cables overall screen with unscreened twisted pairs Example: T28 C067 VG-CABLE Table 2 FMGSG0 Cables overall screen with unscreened twisted pairs 0.75 mm 2 and 1.00 mm 2 (star quad) Number of Part no. Cable bundle Nominal Wall Cable Weight Resiswires x nominal diameter diameter of thickness diameter tance cross-section screened wire of sheath at 20 C mm 2 T28 mm AWG mm mm mm mm kg/km Ohm/km nom. min. min. min. max. max. max. 1 x 2 x 0.75 C032 3.7 36 0.13 0.7 5.2 5.6 57 30.5 2 x 2 x 0.75 C040 4.3 36 0.13 0.7 5.6 6.2 75 28.4 4 x 2 x 0.75 C050 7.5 34 0.16 0.7 8.5 9.3 156 28.4 6 x 2 x 0.75 C054 8.7 34 0.16 0.8 9.8 10.8 218 30.5 8 x 2 x 0.75 C059 9.6 34 0.16 0.8 10.7 11.7 265 30.5 10 x 2 x 0.75 C062 10.9 32 0.2 0.8 11.6 12.8 316 30.5 14 x 2 x 0.75 C067 11.8 34 0.16 0.8 12.7 13.9 394 30.5 16 x 2 x 0.75 C069 13.2 32 0.20 0.8 13.9 15.3 466 30.5 (1 x 2 x 1.0) C092 4.1 36 0.13 0.8 5.8 6.4 65 21.4 (2 x 2 x 1.0) C099 4.8 36 0.13 0.8 6.5 7.1 93 21.4 (4 x 2 x 1.0) C104 8.9 36 0.13 1.3 11.5 12.7 223 21.4 (6 x 2 x 1.0) C106 9.6 34 0.16 0.7 10.7 11.9 238 21.4 (8 x 2 x 1.0) C108 10.6 34 0.16 0.75 11.9 13.1 308 21.4 (10 x 2 x 1.0) C109 11.8 34 0.16 0.75 13.0 14.4 370 21.4 (14 x 2 x 1.0) C111 13.2 32 0.2 0.75 14.3 15.9 479 21.4 (16 x 2 x 1.0) C113 15.9 32 0.2 0.85 17.3 19.1 618 21.4 Literature number: 1654420-1 01-13 15
VG-CABLE FMSGSGO part 28 C Cables overall screen with screened pairs Example: T28 C057 Table 3 FMSGSG0 Cables overall screen with screened pairs 0.75 mm 2 Number of Part no. Cable bundle Nominal Wall Cable Weight Resiswires x nominal diameter diameter of thickness diameter tance cross-section screened wire of sheath at 20 C mm 2 T28 mm AWG mm mm mm mm kg/km Ohm/km nom. min. min. min. max. max. max. 2 x 2 x 0.75 C041 8.3 36 0.13 0.70 9.4 10.2 160 28.4 4 x 2 x 0.75 C051 9.5 34 0.16 0.80 10.6 11.6 241 28.4 7 x 2 x 0.75 C057 11.7 34 0.16 0.80 12.6 13.8 355 30.5 11 x 2 x 0.75 C063 14.8 32 0.20 0.90 15.5 17.1 552 30.5 14 x 2 x 0.75 C068 15.8 32 0.20 0.90 16.5 18.1 659 30.5 19 x 2 x 0.75 C072 18.3 32 0.20 0.90 18.8 20.6 872 30.5 24 x 2 x 0.75 C074 20.4 32 0.20 1.00 20.7 22.9 1059 30.5 16 Literature number: 1654420-1 01-13
LFMGSGO part 28 C Cables overall screen with unscreened twisted pairs Example: T28 C076 VG-CABLE Table 4A LFMGSG0 Cables overall screen with unscreened twisted pairs 0.4 mm 2 Number of Part no. Cable bundle Nominal diameter Wall Cable Weight Resiswires x nominal diameter of screened wire thickness diameter tance cross-section of sheath at 20 C mm 2 T28 mm AWG mm mm mm mm kg/km Ohm/km nom. min. min. min. max. max. max. 30 x 2 x 0.4 C076 14.1 32 0.20 0.9 15.1 16.5 493 57 45 x 2 x 0.4 C077 17.6 32 0.20 0.9 18.1 20.0 699 57 Literature number: 1654420-1 01-13 17
VG-CABLE LFMGSSGO part 28 E Cables double screened twisted pairs Example: T28 E006 Table 4B LFMGSSG0 Cables double screened twisted pairs 0.4 mm 2 Number of Part no. Cable bundle Nominal diameter Wall Cable Weight Resiswires x nominal diameter screened wire thickness diameter tance cross-section of sheath at 20 C mm 2 T28 mm AWG1 mm AWG2 mm mm mm mm kg/km Ohm/km nom. min. min. min. min. max. max. max. 2 x 2 x 0.4 E004 4.4 36 0.13 36 0.13 0.7 5.7 6.3 76 52 4 x 2 x 0.4 E005 6.8 36 0.13 36 0.13 0.7 7.9 8.7 130 52 7 x 2 x 0.4 E006 8.3 36 0.13 34 0.16 0.7 9.4 10.2 182 55 12 x 2 x 0.4 E008 10.2 34 0.16 34 0.16 0.8 11.3 12.3 282 55 19 x 2 x 0.4 E010 12.4 34 0.16 34 0.16 0.8 13.1 14.5 385 55 27 x 2 x 0.4 E011 14.8 32 0.20 32 0.20 0.9 15.5 17.1 550 55 18 Literature number: 1654420-1 01-13
LFMGSGO Teil 28 C Cables screened triples Example: T28 C110 0 0 8 9 9 8 8 0 0 9 8 9 9 8 8 9 0 9 8 0 VG-CABLE 0 Table 4C LFMGSGO Cables screened triples 0.4 mm 2 Number of Part no. Cable bundle Nominal Wall Cable Weight Resiswires x nominal diameter diameter of thickness diameter tance cross-section screened wire of sheath at 20 C mm 2 T28 mm AWG mm mm mm mm kg/km Ohm/km nom. min. min. min. max. max. max. 3 x 3 x 0.4 C105 6.7 36 0.13 1.0 8.8 9.6 128 52.0 5 x 3 x 0.4 C107 8.2 36 0.13 0.7 9.5 10.5 159 52.0 7 x 3 x 0.4 C110 9.1 34 0.16 0.7 10.9 11.9 216 52.0 10 x 3 x 0.4 C112 11.9 34 0.16 0.75 13.9 15.3 300 52.0 12 x 3 x 0.4 C114 12.4 34 0.16 0.75 14.2 15.6 326 52.0 14 x 3 x 0.4 C115 13.3 32 0.20 0.75 15.2 16.6 387 52.0 19 x 3 x 0.4 C116 14.9 32 0.20 0.75 16.7 18.3 480 52.0 24 x 3 x 0.4 C117 17.7 32 0.20 0.85 18.9 20.7 563 52.0 30 x 3 x 0.4 C118 18.8 32 0.20 0.85 19.9 21.9 662 52.0 37 x 3 x 0.4 C119 20.7 30 0.25 0.85 21.7 23.9 816 52.0 44 x 3 x 0.4 C121 23.7 28 0.33 0.9 24.7 26.1 1014 52.0 Literature number: 1654420-1 01-13 19
VG-CABLE LFMSGSGO part 28 C Cables overall screen with screened twisted pairs Example: T28 C056 Table 5A LFMSGSG0 Cables overall screen with screened twisted pairs 0.4 mm 2 Number of Part no. Cable bundle Nominal Wall Cable Weight Resiswires x nominal diameter diameter of thickness diameter tance cross-section screened wire of sheath at 20 C mm 2 T28 mm AWG mm mm mm mm kg/km Ohm/km nom. min. min. min. max. max. max. 2 x 2 x 0,4 C039 6.3 36 0.13 0.70 8.1 8.9 118 53 4 x 2 x 0.4 C049 8.1 34 0.16 0.70 9.1 9.9 170 53 7 x 2 x 0.4 C056 9.9 34 0.16 0.80 11.0 12.0 253 56 12 x 2 x 0.4 C064 12.5 32 0.20 0.80 13.2 14.6 395 56 19 x 2 x 0.4 C071 15.5 32 0.20 0.90 16.2 17.8 572 56 27 x 2 x 0.4 C075 18.2 32 0.20 0.90 18.7 20.5 774 56 Table 5B LFMSGSG0 Cables overall screen with screened twisted pairs 0,25 mm 2 Number of Part no. Cable bundle Nominal Wall Cable Weight Resiswires x nominal diameter diameter of thickness diameter tance cross-section screened wire of sheath at 20 C mm 2 T28 mm AWG mm mm mm mm kg/km Ohm/km nom. min. min. min. max. max. max. 3 x 2 x 1.2 + 18 x 2 x 0.25 C073 16.5 32 0.20 0.90 17.8 19.6 610 56 27 x 4 x 0.25 C078 20.3 32 0.20 1.00 20.6 22.8 980 56 20 Literature number: 1654420-1 01-13
LFMSGSSGO part 28 E Cables double screened twisted triples Example: T28 E007 VG-CABLE Table 6 LFMSGSSG0 Cables double screened twisted triples 0.4 mm 2 Number of Part no. Cable bundle Nominal diameter Wall Cable Weight Resiswires x nominal diameter of screened wire thickness diameter tance cross-section of sheath at 20 C mm 2 T28 mm AWG1 mm AWG2 mm mm mm mm kg/km Ohm/km nom. min. min. min. min. max. max. max. 5 x 3 x 0.4 E007 10.3 34 0.16 34 0.16 0.8 11.2 12.4 310 53 12 x 3 x 0.4 E009 15,2 32 0.20 32 0.20 0.9 15.9 17.5 624 56 Literature number: 1654420-1 01-13 21
FOR MORE INFORMATION Technical Support North America +1 800 522 6752 Asia/Pacific +86 0 400 820 6015 Austria +43 1 905 601 228 Baltic Regions +46 8 5072 5000 Benelux +31 73 6246 999 Czech Republic +420 800 701 462 France +33 1 34 20 86 86 Germany +49 6251 133 1999 Hungary +36 809 874 04 Italy +39 011 401 2632 Nordic +46 8 5072 5000 Poland +48 800 702 309 Russia +7495 790 790 2 Spain/Portugal +34 93 2910366 Switzerland +41 52 633 66 26 United Kingdom +44 800 267 666 Follow us on Twitter for all the latest product news @TEConnectivity, and on Facebook, TEConnectivity. Connect with one of our Subject Matter Experts at www.designsmarterfaster.com www.te.com/adm 2013 Tyco Electronics Corporation. All Rights Reserved. 1654420-1 ADM 1M 01/2013 Raychem, TE Connectivity and the TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information herein, nothing herein constitutes any guarantee that such information is error-free, or any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this publication reserves the right to make any adjustments to the information contained herein at any time without notice. All implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose are expressly disclaimed. The dimensions herein are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. In case of any potential ambiguities or questions, please don t hesitate to contact us for clarification.