Fiber Optic Patchcords & Cable Assemblies Exclusive CD edition March 2006
Fibre Optic Patch Cords Singlemode - - - M Cable Option FPC Connector on both ends (patch cord) FPT Connector on one end (pigtail) Leave Blank 3mm single M 2mm single F.7mm single 9 900 micron Z 3mm dual zip 2 2mm dual zip T.7mm dual zip LSZH 5 Cable H3 3mm simplex HZ 3mm dual zip H4 2.4mm simplex H4Z 2.4mm dual zip H8F.8mm simplex H8T.8mm dual zip For hybrid patch cords, enter both connector types in this field and separate them with a slash mark; remove S from the UPC connector options (see second ordering example). 2 One connector per end; requires dual zip cable 3 Requires 900 micron,.7mm or 2mm cable 4 Requires.7mm or 2mm dual zip cable 5 Low smoke, zero halogen Length X Length in metres Leave Blank 2mm S 900 micron,.7mm, 3mm Connector Type SPSC SC UPC APSC SC 8 APC APSC9 SC 9 APC SDSC SC duplex 2 AE2 E2000 8 APC SPFC FC UPC APFC FC 8 APC SPST ST UPC SPLX LX.5 UPC 3 ALX5 LX.5 8 APC 3 SDLX LX.5 UPC duplex 4 ADLX LX.5 APC duplex 4 SPLC LC UPC SDLC LC UPC duplex 2 SMTRJ MTRJ (no pins) SMTRJP MTRJ (with pins) Ordering Example FPC2-SPFC-0M: Patch cord with FC UPC connectors on both ends, 2mm dual zip cable, 0 metres in length with standard breakout length of 2" on both ends. FPC-SPST/PSC-S-0M: Patch cord with ST UPC connector on one end and SC UPC connector on the other end, 0 metres in length. Ordering information for multimode patch cords follows on the next page.
Fibre Optic Patch Cords Multimode - - - M Cable Option FPC FPT Connector on both ends (patch cord) Connector on one end (pigtail) Leave Blank 3mm single M 2mm single F.7mm single 9 900 micron Z 3mm dual zip 2 2mm dual zip T.7mm dual zip LSZH 5 Cable H3 3mm simplex HZ 3mm dual zip H4 2.4mm simplex H4Z 2.4mm dual zip H8F.8mm simplex H8T.8mm dual zip Length X Length in metres Fibre Size A 50/25 B 62.5/25 Connector Type MSC SC UPC MDSC SC duplex 2 MFC FC UPC MST ST UPC MLX5 LX.5 UPC 3 MDLX LX.5 duplex 4 MLC LC UPC MDLC LC duplex 2 MTRJ MTRJ (no pins) MTRJP MTRJ (with pins) For hybrid patch cords, enter both connector types in this field and separate them with a slash mark 2 One connector per end; requires dual zip cable 3 Requires 900 micron,.7mm or 2mm cable 4 Requires.7mm or 2mm dual zip cable 5 Low smoke, zero halogen Ordering Example FPC-MST/MSC-B-7M: Patch cord with ST UPC connector on one end and SC ultra polish connector on the other end, 62.5/25 fibre size, 7 metres in length. Fibre Optic Accessories 2
Fibre Optic Patch Cords Multifibre Patch Cords (4 to 32 fibres) Ripcord Cable Jacket, PVC 0.89mm thick Central Strength Aramid Yarn Member.7mm Fibre subunit Ripcord PVC Jacket 0.64mm thick Buffered Fibre 900 micron Cable Jacket, PVC.65mm thick Aramid Yarn Central Strength Member.7mm Fibre subunit Ripcord Ripcord Standard Wall (4-fibre shown) Soft Wall (2-fibre shown) Thick Wall (4-fibre shown) Standard wall: Available with 4, 6, 2 or 32 tight buffered.7mm fibres enclosed in a standard wall outer jacket. Each.7mm fibre is coded for easy identification of individual fibres. Central strength member, aramid yarn; PVC jacket thickness 0.89mm. Soft wall: Available with 6, 8 or 2 tight buffered 900 micron fibres with a thin outer jacket. No central strength member or aramid yarn; PVC jacket thickness 0.64mm. Thick wall: Available with 4 or 24 tight buffered.7mm fibres. Each.7mm fibre is coded for easy identification of individual fibres. Central strength member, aramid yarn; PVC jacket thickness.65mm. Singlemode FPM-0 / - M- / Connector Type (st and 2nd end) 0 Stub E SC APC J E2000 APC D FC APC K LC UPC E2000 is not available with.7mm subunits. Length X Length in metres A 4-fibre thick wall with.7mm subunits D 4-fibre standard wall with.7mm subunits W 4-fibre soft wall E 6-fibre standard wall with.7mm subunits P 6-fibre soft wall L 8-fibre soft wall F 2-fibre standard wall with.7mm subunits M 2-fibre soft wall AD 24-fibre thick wall with.7mm subunits BD 32-fibre thick wall with.7mm subunits Breakout Length X Length in inches Leave blank if both ends 2" Multimode Connector Type (st and 2nd end) 0 Stub 9 SC UPC 5 ST UPC A FC UPC X LX.5 UPC P LC UPC MFPM- / - M- / Length X Length in metres WB 4-fibre soft wall, 62.5/25 PB 6-fibre soft wall, 62.5/25 NB 2-fibre soft wall, 62.5/25 Breakout Length X Length in inches Leave blank if both ends 2" 3
Fibre Optic Patch Cords TracerLight Connector Identification System The innovative TracerLight Connector Identification System offers a quick and accurate method of identifying the termination point of optical patch cords. Each end of a TracerLight patch cord features a flashing light source, allowing technicians to visually trace individual patch cords from one end to the other without pulling the patch cord. The TracerLight power source is inserted into the TracerLight component on one end of the patch cord. This causes the LED on each end to begin flashing rapidly so the distant end of the patch cord can be quickly and easily identified without interruption of service. Singlemode Simplex FTL- / - M Connector Style (first end) E SC 8 APC H E2000 UPC J E2000 8 APC D FC 8 APC Connector Style (second end) E SC 8 APC H E2000 UPC J E2000 8 APC D FC 8 APC Example: 050 = 50 metres 25 = 25 metres D Singlemode single fibre Multimode Simplex FTL- / - M Connector Style (first end) 9 SC 5 ST A FC X LX.5 Connector Style (second end) 9 SC 5 ST A FC X LX.5 Example: 050 = 50 metres 25 = 25 metres A Multimode 50/25 single fibre B Multimode 62.5/25 single fibre Ordering information for duplex TracerLight cords follows on the next page. 4
Fibre Optic Patch Cords TracerLight Connector Identification System Singlemode Duplex FTL- M Connector Style (first end) E SC 8 APC H E2000 UPC J E2000 8 APC D FC 8 APC Connector Style (second end) E SC 8 APC H E2000 UPC J E2000 8 APC D FC 8 APC Example: 050 = 50 metres 25 = 25 metres Z Singlemode dual zip fibre Multimode Duplex FTL- M Fibre Optic Accessories Connector Style (first end) 9 SC 5 ST A FC X LX.5 Connector Style (second end) 9 SC 5 ST A FC X LX.5 Power Source Example: 050 = 50 metres 25 = 25 metres E F Multimode 50/25 dual zip fibre Multimode 62.5/25 dual zip fibre Ordering Information Description TracerLight power source FTL-PS 5
Fibre Optic Cable Assemblies Intrafacility Fibre Cable Assemblies Intrafacility fibre cable (IFC) is a multifibre cable designed for use within a building. Generally, it is constructed without metallic strength members and is designed to meet the fire resistant characteristics required in the central exchange. The number of fibres ranges from 2 to 26. Standard IFC assemblies are riser rated and meet UL-666 OFNR. Two types of IFC are available: ribbon and stranded. Ribbon cable consists of multifibres arranged in ribbons. Each ribbon contains 2 fibres and is identified as a subunit. The fibres which comprise the ribbons are colour-coded for identification. With the construction of ribbon cable, the fibres are located in the centre of the cable and the outer jacket provides the strength and protection of the cable. PVC OUTER JACKET DETAIL A DETAIL B SEE DETAIL A FIBREGLASS STRENGTH MEMBERS PVC INNER JACKET SEE DETAIL B Coating Cladding MYLAR TAPE RIBBON AIR CORE 2 3 4 5 6 7 8 9 0 2 - Blue 2 - Orange 3 - Green 4 - Brown 5 - Slate 6 - White 7 - Red 8 - Black 9 - Yellow 0 - Violet - Rose 2 - Aqua Core With stranded cable, individual 900 micron fibres make up the construction of the cable. The fibres are bundled into subunits of 6- or 2-fibres each. Each subunit is identified and the individual fibres within the subunits are colour-coded. Stranded IFC diameters increase in proportion with the fibre counts. 6-FIBRE SUBUNIT (SEE DETAIL A) MYLAR TAPE PVC CABLE JACKET 2-FIBRE SUBUNIT (SEE DETAIL B) MYLAR TAPE PVC CABLE JACKET DETAIL A PVC JACKET BUFFERED FIBRE ARAMID YARN SEE DETAIL C RIPCORD (2) CENTRAL STRENGTH MEMBERS RIPCORD (2) CENTRAL STRENGTH MEMBERS DETAIL B PVC JACKET 6-fibre subunits (example shows 36 fibres) ARAMID YARN PVC JACKET BUFFERED FIBRE 900 MICRON 2-fibre subunits (example shows 72 fibres) COLOR CODE CHART BLUE 2 ORANGE 3 GREEN 4 BROWN 5 SLATE 6 WHITE 7 RED 8 BLACK 9 YELLOW 0 VIOLET ROSE 2 AQUA ARAMID YARN BUFFERED FIBRE DETAIL C BUFFERED FIBRE BUFFER COATING CLADDING CORE SEE DETAIL C (2-fibre shown) 6
Fibre Optic Cable Assemblies Intrafacility Fibre Cable Assemblies Singlemode IFC - / - Connector Style 0 Stub E SC APC J E2000 APC D FC APC K LC UPC Example: 020 = 50 metres 50 = 50 metres A 2-fibre stranded B 24-fibre stranded C 36-fibre stranded 2 48-fibre stranded V 72-fibre stranded L 96-fibre stranded NA 2-fibre ribbon HA 24-fibre ribbon MA 36-fibre ribbon JA 48-fibre ribbon DS 72-fibre ribbon LA 96-fibre ribbon TX 2-fibre stranded Maxi-Strip RX 24-fibre stranded Maxi-Strip NX 36-fibre stranded Maxi-Strip PX 48-fibre stranded Maxi-Strip MX 72-fibre LSZH 3 Maxi-Strip GF 96-fibre LSZH 3 Maxi-Strip Breakout/Panel Type 2 LEAVE BLANK 8" FCM L FDM A 7" FCM 2A FL2, 2 exit up or down 2B FL2, 24 exit up or down 2C FL2, 48 exit up or down 2D FL2, 72 exit up 2E FL2, 96 exit up 2F FL2, 72 exit down 2G FL2, 96 exit down FTB FTB MOD 3A FL-A, bottom 3A2 FL-A, top For 44- or 26-fibre counts, additional fibre types and ordering information, contact your ADC KRONE representative. 2 ADC KRONE will customise the breakout length of the IFC to ensure proper cable management. ADC KRONE recommends using the FCM breakout length (6' =.8m). 3 Low smoke, zero halogen. Ordering information for multimode intrafacility fibre cable assemblies follows on the next page. 7
Fibre Optic Cable Assemblies Intrafacility Fibre Cable Assemblies Multimode MIFC - / - Connector # Type 9 SC UPC 5 ST UPC A FC UPC X LX.5 UPC P LC UPC Connector #2 Type 0 Stub 9 SC UPC 5 ST UPC A FC UPC X LX.5 UPC P LC UPC Example: 050 = 50 metres 25 = 25 metres Fibre size AB 2-fibre stranded 62.5 BB 24-fibre stranded 62.5 CB 36-fibre stranded 62.5 2B 48-fibre stranded 62.5 VB 72-fibre stranded 62.5 LB 96-fibre stranded 62.5 Breakout/Panel Type LEAVE BLANK 8" FCM L FDM A 7" FCM 2A FL2, 2 exit up or down 2B FL2, 24 exit up or down 2C FL2, 48 exit up or down 2D FL2, 72 exit up 2E FL2, 96 exit up 2F FL2, 72 exit down 2G FL2, 96 exit down FTB FTB MOD 3A FL-A, bottom 3A2 FL-A, top ADC KRONE will customise the breakout length of the IFC to ensure proper cable management. ADC KRONE recommends using the FCM breakout length (6' =.8m). Contact ADC KRONE for additional fibre types and ordering information. 8
Fibre Optic Connector Specifications Singlemode Ultra Polish Connectors (UPC) Insertion Loss Return Loss Singlemode Angled Polish Connectors (APC) Insertion Loss Return Loss Multimode Ultra Polish Connectors Insertion Loss Return Loss SC FC LC LX.5 E2000 ST MTRJ 0.3dB max. 0.3dB max. 0.3dB max. 0.3dB max. 0.7dB max. 0.dB typical 0.dB typical 0.5dB typical 0.5dB typical 0.3dB typical 57dB min. 57dB min. 55dB min. 57dB min. 40dB min. SC FC LC LX.5 E2000 ST MTRJ 0.5dB max. 0.5dB max. 0.3dB max. 0.3dB max. 0.5dB max. 0.5dB typical 0.5dB typical 0.5dB typical 0.dB typical 0.2dB typical 65dB min. 65dB min. 65dB min. 65dB typical 65dB min. SC FC LC LX.5 E2000 ST MTRJ 0.7dB max. 0.7dB max. 0.5dB max. 0.4dB max. 0.7dB max. 0.5dB max. 0.3dB typical 0.5dB typical 0.3dB typical 20dB min. 20dB min. 20dB min. 25dB min. 20dB min. 20dB min. Patch Cords L Length Tolerance 0 to 5m +6cm/-0cm +5m +%/-0cm Multifibre Length Tolerance 0 to 5m +6cm/-0cm +5m +%/-0cm L IFC Stranded Length Tolerance 0 to 5m +6cm/-0cm +5m +%/-0cm L Ribbon Length Tolerance 0 to 20m +5cm/-0cm +20m +90cm/-0cm 9
Internet: www.adckrone.com For a listing of ADC s global sales office locations, please refer to our web site. ADC GmbH, Beeskowdamm, 3-, 467 Berlin, Germany Phone: +49-(0)30-8453 88 Fax: +49-(0)30-8453 703 ADC Telecommunications, Inc., P.O. Box 0, Minneapolis, Minnesota USA 55440-0 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC KRONE reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our world headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. 37439 8/05 Original 2005 ADC Telecommunications, Inc. All Rights Reserved