products line * supplies Supplies KD line The feeding supplies of KD line had been developed to industrial installation, whose operation is continuous and requires component trustworthy. Constructed with the most modern techniques of keyed supplies, it possesses high income, reduced dimensions, possibility of linking of supplies in parallel and housing for DIN rail. KFT line New KFT supplies possess a new and modern housing, developed for more practical and application in the work stations. Available in the following versions: Output 24 Vdc / 5 A Output 24 Vdc / 10 A Output 24 Vdc / 20 A AS-Interface network 30 Vdc / 4 A
/ 0.8A KF-KD-2401R/FR90-264Vac High performace against noises Redundant for parallel connection / 0.8A voltage Comsume current 90 to 264Vac or 130 to 370 Vdc 0.3A@90Vac; 0.1A@264Vac 26 VA (max.) 47 to 63 Hz Internal fuse 2A > 75 % @ 0.8A / 264 Vac Connection < 100 mvpp @ 0.8 A 0.9 A (use continuous @ 50 C) polycarbonate bornes plug-in Connections diagram: 75g Vac F 1 F 2 Supply 1 Supply 2 Vdc Load F Input Alternate Current 90-264Vac N 4 5 6 FEEDING SUPPLY LED 16(+) 17(-) 18(-) 22(+) 23(-) 24(-) Output Direct Current 24 Vdc 1(-) 2(+) Power Rail
/ 1A KD-2401/FR90-264Vac Low cost Stabilized output in / 1A Protection aganist short and overload Technical Characteristics: supply Supply efficient / 1A 90 to 264Vac or 130 to 370 Vdc 0.3A@90Vac; 0.1A@264Vac 26 VA (max.) 47 to 63 Hz green led light on: blinking: overload light off: short-circuit Internal fuse 2A > 75 % @ 1A / 264 Vac Connection < 100 mvpp @ 1 A 1.2 A (use continuous @ 50 C) polycarbonate bornes plug-in Connections diagram: 75g FEEDING SUPPLY Redundant System is not avaible in this version. Input Alternate Current 90-264Vac F N 4 5 6 22(+) 23(-) 24(-) Output Direct Current 24 Vdc LED 1(-) 2(+) Power Rail
/ 5A KFT-2405R/AT110-220Vac 128 Redundant to connection in parallel Fault indication via voltage / 5A 110/ 220Vac(automatic selection) 1.3A@88Vac; 0.7A@264Vac 150 VA (max.) 47 to 63 Hz Internal fuse 4A > 90 % @ 5A / 264 Vac < 60 mvpp @ 5 A 5.5 A (use continuous @ 50 C) aluminium and galvanized steel 65 106 Connection screwed terminals 2.5mm 2 650g Vac F 1 Supply 1 Vdc Load F 2 Supply 2
KFT-3004R-AT110/220Vac 30Vdc / 4A KFT-3004R/AT110-220Vac Indicate to AS-Interface network Fault indication via The KFT-3004R supply must be used together with the expander module of ASI-KD-EF supply that has the inductors necessary to make the network modulation. ASI-KD-EF voltage 30.5Vdc / 4A 110/ 220Vac(automatic selection) 1.3A@88Vac; 0.7A@264Vac 150 VA (max.) 47 to 63 Hz Internal fuse 4A > 90 % @ 4A / 264 Vac 30.5Vdc < 60 mvpp @ 4 A 4.5 A (use continuous @ 50 C) aluminium and galvanized steel Connection screwed terminals 2.5mm 2 650g application ASI Control Panel KFT-3004R PLC ASI-KD-EF Field
/ 10A KFT-2410R/AT110-220Vac Redundant to connection in parallel Fine adjust of the output voltage The KFT-2410R supply was specially developed to applications in industrials networks as DeviceNet and Profibus DP. 128 voltage / 10A 110/ 220Vac(automatic selection) 2.6A@88Vac; 1.4A@264Vac 300 VA (max.) 50 to 60 Hz Internal fuse 4A > 92 % @ 10A / 264 Vac (adjustable from 22 to 28Vdc) < 100 mvpp @ 10 A 11 A (use continuous @ 50 C) aluminium and galvanized steel Connection screwed terminals 2.5mm 2 65 65 106 1200g Vac F 1 Supply 1 Vdc Load INPUT F FEEDING SUPPLY + OUTPUT ALTERNATE CURRENT DIRECT CURRENT F 2 Supply 2 110 or 220Vac N - LED
/ 20A KFT-2420R/220Vac 128 Redundant to connection in parallel Fine adjust of the output voltage voltage / 20A 220Vac 3A@242Vac 600 VA (max.) 50 to 60 Hz Internal fuse 4A > 90 % @ 20A / 242 Vca (adjustable from 22 to 28Vdc) < 100 mvpp @ 10 A 22 A (use continuous @ 50 C) aluminium and galvanized steel 215 106 Connection screwed terminals 2.5mm 2 1900g Vac F 1 Supply 1 Vdc Load INPUT F FEEDING SUPPLY + OUTPUT ALTERNATE CURRENT DIRECT CURRENT F 2 Supply 2 220Vac N - LED
www.sense.com.br Addresses: HEADOFFICE - SÃO PAULO Rua Tuiuti, 1237 - Tatuapé São Paulo - SP - Cep: 03081-000 Phone: 55 11 2145-0444 Fax: 55 11 2145-0404 vendas@sense.com.br FACTORY - MINAS GERAIS Av. Joaquim Moreira Carneiro. 600 - Santana Santa Rita do Sapucaí - MG - Cep: 37540-000 Phone: 55 35 3471-2555 Fax: 55 35 3471-2033 BRANCH OFFICE - Campinas Av. Barão de Itapura, 1100-2º andar - sala: 22 Botafogo - Campinas-SP - Cep: 13020-432 Phone / Fax: 55 19 3239-1999 campinas@sense.com.br BRANCH OFFICE - Porto Alegre Rua Itapeva, 80 - conj. 302 - Passo da Areia Porto Alegre-RS - Cep: 91350-080 Phone: 55 51 3345-1058 Fax: 55 51 3341-6699 palegre@sense.com.br BRANCH OFFICE - Rio de Janeiro Rua Almirante Tamandaré, 66 sala: 408 - Flamengo Rio de Janeiro - RJ - Cep: 22210-060 Phone: 55 21 2557-2526 National Sellers ABS - Sistemas de Automação Ltda. Poços de Caldas - MG Phone: 55 35 3722-1667 - Fax: 55 35 3722-2624 absautomacaomg@matrix.com.br AVATEC Representações Ltda. Vitória - ES Phone: 55 27 3327-1599 - Fax: 55 27 3327-1275 avatec.representacao@uol.com.br COMTÉCNICA Automação Industrial Ltda. Fortaleza - CE Phone / Fax: 55 85 3272-6962 comtecnica@comtecnica.com.br ELCONI Com. Rep. de Elétrico e Teleinform. Ltda. Curitiba - PR Phone: 55 41 3352-3022 - Fax: 55 41 3352-2945 vendas@elconi.com.br ELETRO NACIONAL Comércio Representações Ltda. Joinville - SC Phone / Fax : 55 47 3435-4466 vendas@eletronacional.com.br KIKUCHI Representação Ltda. Piatã - BA Phone: 55 71 3367-1181 - Fax: 55 71 3367-6555 kikuchivendas@uol.com.br LOBRIM Comércio e Representação Ltda. Recife - PE Phone / Fax: 55 81 3424-6500 lobrim@rimafel.com.br NAM Comércio Representações Técnicas Ltda. São Luiz - MA Phone: 55 98 3227-0455 - Fax: 55 98 3227-0676 nam.miotto@elo.com.br PACNET Com. Eletro Eletrônicos Ltda. Goiânia - GO Phone: 55 62 3207-8926 - Fax: 55 62 3207-7525 vendas@pacnetprodutos.com.br 2000000062 Rev.B - 02/2014 - We rerserve the rights of modify the information showed here without prior warning.