Table of contents. 3. Packaging Inclusive Transport lock Lamp type Changing the lamp...

Similar documents
Table of contents. 3. Packaging Inclusive Transport lock Lamp type Changing the lamp...

Table of contents. 3. Packaging Contents Transport lock Lamp types Changing the lamp...

1. INTRODUCTION AND UNPACKING

Truss Light COB LED 30W

LED PAR 64 floor 12x8W RGBWAUV incl. remote

HOT BEAM 280 MOVING HEAD BEAM

HEX16 Strip User Manual

Controller DMX DC-1224

BEAM MOVING HEAD WITH 100W OSRAM HRI LAMP AND 8-FACET PRISM USER GUIDE

LED Thunder S-150 Code 1097

LED SPOT HEAD USERS GUIDE

LED SPOT HEAD USERS GUIDE

PRODUCT SPECIFICATIONS

KingWash 7QX 7x40w,Zoom 5-60degree. User manual. Please read the instructions carefully before use TABLE OF CONTENTS

BSL HELIOS USERS GUIDE

LED Spot 300W. Please read this user manual before your operation

LED Beam Moving Head. TWIST-150LED Order No INSTRUCTION MANUAL

aorun manual V2.0 MARCH 2018

BEAM MOVING HEAD YODN Lamp. 132W 2R MOVING HEAD Brightness / Stability USER MANUAL. Version 1.0 beta

LED BEAM HEAD USERS GUIDE

ALO 030 MKII. 30 Watt DMX LED scanner. User manual

Fixture One XLR Signal Cable One Omega Clamp - Two Safety Chain One User Manual - One

LED Spot Light User Manual Model LS90 Big Dipper Laser Science And Technology Co., Ltd Please read this manual carefully before operating

ArtFox Lighting. LED Beam Wash 19E. User manual. 6. Fixture Cleaning. Please read the instructions carefully before use

minipointe is a tiny agile air cutter specifically designed to produce sharp beam and aerial effects especially in venues constrained by size.

PRODUCT SPECIFICATIONS

USER MANUAL Table of Contents

LED BEAM HEAD USERS GUIDE

80W SPOT MOVING HEAD CYCLONE-80 USER GUIDE April 2014 version

WASH MOVING HEAD M7W15RGBW USER MANUAL. For safety, please read this user manual carefully before initial use.

BSL MAGIC ZOOM 7 USERS GUIDE

ALO 060 DMX LED scanner

User Manual. 360W LED Moving Zoom KEEP THIS MANUAL FOR FUTURE NEEDS. 36pcs10W 4 in 1 RGBW LEDs

Stage Wash 7x 10W LED Moving Head (RGBW)

Dragonfly Quad. User Manual V1.4. Order code: EQLED101

DMX LED light effect with 4 lenses

Instruction Manual. from software version 1.0 (instruction version 1.3) Internet:

AuraBeam 150 LED. User Manual KEEP THIS MANUAL FOR FUTURE NEEDS

SquareLED - Aura Bar & Matrix Beam Light 100

ORLAND SCAN PR PR LIGHTING LTD. Yingbin Road, Dashi Panyu, Guangzhou, China

Fusion 120 Zoom. User Manual. Order code: EQLED068

PRODUCT SPECIFICATIONS

User Manual MAINTENANCE AND CLEANING. CAUTION Disconnect from mains before starting maintenance operation. KEEP THIS MANUAL FOR FUTURE NEEDS

www. eklights.com Guangzhou Liangyi Lighting Equipments Co.,Ltd. 37 Gongyedadao, Xinhua, Huadu, Guangzhou PC:510800

1. Product Introduction:

4-PROJECTOR BAR WITH 3 X 9W LEDS AND 1 X 1W FLASH LED USER GUIDE

aorun manual V1.0 OCTOBER 2017

CAB-330-BEAM-IP USER S MANUAL

Mover Beam 7 CKU (US) / CKE (EU) USER MANUAL

MHL-1410WISPOT 14X 10W QUAD DMX 2.4GHZ

JunoScan MK-II LED scanner. user manual

120W Beam Light AL-BL-120 FEATURES. Lamp: PHILIPS 2R 120W. Channel mode: 20CH. Level scanning: 540 (16bit precision scan) electronic error correction

BEAM SPOT 280W Moving Head Light

YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING. SAVE IT FOR FUTURE REFERENCE

USER MANUAL. DE-1 Police-light. CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing!

180w led gobo moving USER MANUAL

Commander 384. w w w. p r o l i g h t. c o. u k U S E R M A N U A L

DMX Values. Legend 230SR Beam DMX Chart

BEAM 200. User Manual

Spectra Batten (Order code: LEDJ95)

MH-X50+ LED spot moving head. user manual

ElektraLite lightstream

LED Pixel Track Pro ORDERCODE 42205

Stage Right Party 10-Watt Mini Beam Moving Head LED Light

PILOT 250 PR PR LIGHTING LTD. Yingbin Road, Dashi Panyu, Guangzhou, China

Mini LED Pin Spot Light Model: PLS00571

SATURA PROFILE. user manual. ELATION SATURA PROFILE user manual

Spectra Flood Q40. Exterior Fixture User Manual. Order code: LEDJ Version LEDJ284N - 15 Version

USER MANUAL. TS-3 DMX-Scanner. For your own safety, please read this user manual carefully before you initial start-up.

PLATINUM FLX. user manual. ELATION PLATINUM FLX user manual

This device is a lighting effect for professional use on stages, in discotheques, theatres, etc..

Quick Reference Guide

MY 250 USER MANUAL (V1.12)

Stratos Duo RGB. User Manual. Order code: EQLED371

Moving Heads The magic of light

USER MANUAL MHL-10W-7-RGBW MKII

Led Dynamic DMX Tri Curtain Manual

TRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL

VORTEX User Instructions

DMX Operator 192-channel lighting controller

Winmate Communication INC.

ORDER CODE: EQLED65 USER MANUAL

Edition Notes. Edition Notes. Trademarks CHAUVET is a registered trademark of CHAUVET & Sons LLC. (d/b/a CHAUVET

TABLE OF CONTENTS. Returns Contact Us Page 2 of 21 Intimidator Spot LED 450 User Manual Rev. 2

PLATINUM SPOT III. user manual. ELATION PLATINUM SPOT III user manual

Page 1 of 6 FXLD618FRP2I4 LED FIXTURE Version 0.2 OWNERS MANUAL 10/04/17

SPOT/FROST MOVING HEAD WITH PHILIPS MSD PLATINUM 5R LAMP. Evora. Flex5R USER GUIDE January 2015 version

KEEP THIS MANUAL FOR FUTURE NEEDS

Owner Handbook Neptune Tumbler. Owner Handbook. Neptune Tumbler

Hex-color RGBAW+UV LED strip light

2016 ADJ Products, LLC ADJ Products, LLC User Instructions

LED Pixel Track V3 ORDERCODE 42200

SUPERSHARPY SUPERSHARPY 2

LED MOVING HEAD LedWash. 36 x 10w RGBW 4in1 Zooming USER MANUAL. Version 1.0 beta

2016 ADJ Products, LLC ADJ Products, LLC User Instructions

USER MANUAL (SSDL-3201RGB)

User Manual. Please check the local Laser assignments in your country before starting the Laser Show!!!

OWNER S MANUAL MOTORIZED 7 WIDE TFT LCD COLOR MONITOR CNT-701

E SPOT III. user manual. ELATION E SPOT III user manual

LUXIPIX LX ,00 EUR LX ,44 EUR LX ,00 EUR 7 X 7 WW 5 X 5 RGBW 14 X 1 WW KLINGNET LED MATRIX

Transcription:

Manual Trident R10

Table of contents 1. Safety instructions... 3 1.1. FOR SAFE AND EFFICIENT OPERATION... 3 1.2. Additional Information for safety... 4 2. Statement... 5 2.1. Product description... 5 2.2. Introduction to the product... 5 2.2.1. Technical Data... 5 3. Packaging... 7 3.1. Inclusive... 7 3.2. Transport lock... 7 3.3. Lamp type... 7 3.3.1. Changing the lamp... 7 4. Control... 9 4.1. Description of the display section... 9 4.1.1. Structure of the menu... 9 4.2. DMX Chart... 11 4.2.1. Mode 1 Compressed mode (15 Channels)... 11 4.2.2. Mode 2 Normal mode (17 channels)... 14 4.2.3. Mode 3 Extended mode (24 channels)... 17 2 / 24

1. Safety instructions This device is suitable for indoor use (not outdoors) only. All modifications to the device will void the warranty. Repairs are to carry out by skilled personnel only. Use only fuses of the same type and original parts as spare parts. Protect the unit from rain and humidity to avoid fire and electric shocks. Make sure to unplug the power supply before opening the housing. 1.1. FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperature Avoid exposing it to direct rays of the sun or near a heating appliance. Not put it in a temperature bellow 32 F /0 C, or exceeding 104 F /40 C. Keep away from humidity, water and dust Do not place the set in a location with high humidity or lots of dust. Containers with water should not be placed on the set. Keep away from sources of hum and noise Such as transformer motor, tuner, TV set and amplifier. To avoid placing on un-stable location Select a level and stable location to avoid vibration. Do not use chemicals or volatile liquids for cleaning Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt. If out of work, contact sales agency immediately Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not open the cabinet by yourself, it might result a danger of electric shock. Take care with the power cable Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not using the device for an extended period of time, be sure to disconnect the plug from the receptacle. 3 / 24

Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Make sure the electrical connection is carried out by qualified personnel. All electrical and mechanical connections have to be carried out according to the European safety standards. 1.2. Additional Information for safety Exessive temperature Ta=40 C Please do not use the device if the temperature exceeds 40 C/ /104 F. Risk of breakage If the lens is broken you cannot use the device anymore. Exchange in this case the lens only for an original of the producer. Size of lens: d = 74 x30mm. Drop safety To avoid injuries carry the package only by twos. If you install the device the mounting bracket has the ability to carry the tenfold load of the weight of the device. Always use a corresponding safety to safe the device additional. While working at the device the place below has to be vacated UV protection and lamp explosion Do not look unprotected directly into the light. The UV radiation is shielded by the lens and the casing, but without the casing it is possible to cause damages on the eyes. Beware of electrical shock Make sure the electrical connection is carried out by qualified personnel. Before you plug in the device make sure that the power supply system has the right voltage and also a crowbar. Every device has to be grounded. Unplug the power supply if you want to change a lamp or you have to open the device. You also have to accomplish this action if there is a thunderstorm or high humidity. Fire risk Make sure that the fuse functioned. It is never allowed to bridge it. If you have to exchange it only use fuses of the same type. The distance between the device and lighted things has to be at least 3m. From a distance of 3m the temperature of the beam subside among 60 C. It is not allowed cover fans and air in and outlets. 4 / 24

Make sure that there is a distance between the device and all objects in an area of 0.5m. Don t put or mount anything on the lens. The device has to cool down for 20 minutes before opening. 2. Statement When we send out the goods, they are well packaged and also at best condition. Every product was tested before delivery. If you recognize mistakes or damages please contact the delivery agent or the supplier. Please read this manual faithful. In this manual you can find information about the handling and the safety regulations of this product. If you disregard this manual we cannot give a warranty for it. Technical changes, which are for progress, may be possible at any time. They are not mentioned particularly in this manual, but affixed extra. 2.1. Product description Thank you for choosing this device. This device is on the current state of technology and has a range of features and meets the requirements of the DMX512 USITT 1990 standard. This device was developed for many different purposes e.g. TV studios, discos, nightclubs, bars and concerts. 2.2. Introduction to the product Power supply Voltage Light source Lamp type Wattage 2.2.1. Technical Data 110V - 240V / 50-60HZ Osram Sirius HRI 280W Color temperature 8000K Optics Zoom 3.8-45 Focus yes Connections Power in Powercon Power out no DMX in/out XLR Neutrik 3pin Functions Pan 540 Tilt 250 Colors Color wheel (17 colors) Gobo wheel 1 9xrotatable Gobo wheel 2 17xstatic Prism 3-way Frost filter no 5 / 24

Operation Sound-to-light Automatic Master-Slave DMX Artnet RDM Hardware Protection class Skill Measurements (LxWxH) Weight Material yes yes yes 15/17/24 channels no no IP20 indoor 320 x 400 x 580 mm 18.5kg Plastic 6 / 24

3. Packaging 3.1. Inclusive The device could be packed in carton, in a single case or in twin case. To every device belong the following accessories, which you have to multiply with the number of devices. Per device: 3.2. Transport lock Material Manual Hanging Brackets Cable Quantity 1 pcs. 2 pcs. 1 pcs. To protect the device there is a transport lock. Before connecting the device to the power supply system you have to open the transport lock. If you want to transport you have to close the transport lock, so that the head of the device is not able to swing freely. 3.3. Lamp type In this Device a lamp of the type Osram Sirius HRI 280W is used. Please use only this type of lamp for the device. Please change always the lamp when lifetime runs out. If you do not it could be possible that the lamp implodes and damages the device. 3.3.1. Changing the lamp Important! If you change the lamp it is not allowed to touch the lamp with bare fingers. The body fat layer remains in the lamp and could damaged it or brand. 1. Interrupt the current supply. Wait at least 20min before you open the device, so that the old lamp can cool down. Arrest the Y-position of the device to 60. 2. Use a cross-tip screwdriver to open the cover. Release the bracket of the fan and the cable at the three points which you can see in the picture. 7 / 24

3. Now you can release the screws of the fan how you can see here. 4. Press cautious on the reflector. Like you can see in this picture. 5. Pull the lamp in one direction like it is shown. 6. Now you can remove the lamp, you only have to release the cables of the lamp and then you can remove it. 7. Install the new lamp backwards. 8 / 24

4. Control 4.1. Description of the display section Every menu is controlled by the jogwheel on the right of the display. Rotation changes the values if you push it you confirm the value. You can exit the menu with point of menu EXIT; there you have to push the wheel again. 4.1.1. Structure of the menu Main Menu Submenu 1 Submenu 2 Function SET Function description Address 1-512 Address number set DMX Smal Simplify mode (15 DMX channels) Mode Stan Standard mode (17 DMX channels) Exte Extended mode (24 DMX channels) ShowReve Natu Normal Revl Reverse 180 BrigSett 000-007 Brightness set Display Backligh MenuBack Return Return 60S 90S Backlight close after delay 60s Menu back to main menu after delay 90s Ligh Off Backlight light always Menu back not automatically Xreverse Yreverse Off Off Pan scan normal Tilt scan normal Open Open Pan scan reverse Tilt scan reverse Fast Pan/Tilt fast speed XY Speed NORM Pan/Tilt normal XY Setup Solw Pan/Tilt slow 360, 360 Pan angle 360 X Angle 540, 540 Pan angle 540 630, 630 Pan angle 630 Off Pan/Tilt optical sensor testing off XY Fback Open Pan/Tilt optical sensor testing on Feature Return Return Shortcut FullColr Off Off Shortcut off for colors and gobos Half color function Open Open Shortcut open for colors and gobos Full color function DMX, DMX Accept DMX ReceMode Wire Auto Accept Wireless AutoRun Slve Accept other signal control RunMode Muse Auto Sound active Inside program run automatically SigClear Off keep signal data 9 / 24

LampSett InfoSee Control AssiTool Return Default Control DmxLamp LampTime ClearTim LampStat Return WorkHour Times Fan1Rota Fan2Rota Version ChanLevel Return Factory Defaults DMXReset Redress Brightne Open clear signal data Return Wink Lamp off Ilum Lamp on Wink Lamp off by manual Ilum Lamp on by manual Off Close other signal control the lamp On open other signal control the lamp 0000-9999 Lamp time * Password input enter Ilum Clear lamp time Wink Lamp off Ilum Lamp on Return 0000-9999 working hours memo for connect power 0000-9999 Open times memo 0000-9999 Fan rotation speed 1 0000-9999 Fan rotation speed 2 V0.0 Version Chan 00- Chan40 DMX value number Return Chan 00- Chan40 Control the channels * Password input enter Fold Recover factory set Save Save factory set * Password input enter Fold Recover to default Off Close other signal control reset Open Open other signal control reset * Password input enter 00-10 Set motors * Password input enter TimeLimi TimsLimi Passwor1 Passwor2 Passwor3 Passwor4 X Drivin X Driven Y Drivin Y Driven 0000-9999 0000-9999 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 Open fixture time limit Fixture times limit Revise password 1 Revise password 2 Revise password 3 Revise password 4 Pan main drive gear Pan slave drive gear Tilt main drive gear Tilt slave drive gear Off Ballast earthed LampPowe total 5V, Open Ballast 5V Y Angle 000-255 Tilt angle rotation set 10 / 24

Reset ExitMenu Return 000-255 Return Checksum 01-10 Check cabrilate dataa Return Return Annu Cancel Exec Reset Exit 4.2. DMX Chart Channel 4.2.1. Mode 1 Compressed mode (15 Channels) Value from 1 PAN 0 2 PAN f 0 3 TILIT 0 4 TILT f 0 5 PT Speed 0 6 COLOR 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 Value to Description 255 Pan 255 Pan fine 255 Tilt 255 Tilt fine 255 PT speed from fast to slow 4 Open white 9 Open white + Color 1 14 Color 1 19 Color 1 + Color 2 24 Color 2 29 Color 2 + Color 3 34 Color 3 39 Color 3 + Color 4 44 Color 4 49 Color 5 + Color 5 54 Color 5 59 Color 5 + Color 6 64 Color 6 69 Color 6 + Color 7 74 Color 7 79 Color 7 + Color 8 84 Color 8 89 Color 8 + Color 9 94 Color 9 99 Color 9 + Color 10 0 104 Color 10 5 109 Color 10 + Color 11 0 114 Color 11 5 119 Color 11 + Color 12 0 124 Color 12 5 129 Color 12 + Color 13 0 134 Color 13 5 139 Color 13 + Color 14 11 / 24

7 Gobo 1 8 Gobo Rot 9 Gobo 140 144 Color 14 145 149 Color 14 + Open white 150 200 Color rotation from slow to fast clockwise 201 204 Stop at any position 205 255 Color rotation from fast to slow counterclockwise 0 4 Gobo off 5 9 Gobo 1 10 14 Gobo 2 15 19 Gobo 3 20 24 Gobo 4 25 29 Gobo 5 30 34 Gobo 6 35 39 Gobo 7 40 44 Gobo 8 45 49 Gobo 9 50 54 Gobo 1 shake 55 59 Gobo 2 shake 60 64 Gobo 3 shake 65 69 Gobo 4 shake 70 74 Gobo 5 shake 75 79 Gobo 6 shake 80 84 Gobo 7 shake 85 89 Gobo 8 shake 90 94 Gobo 9 shake 95 170 Gobo wheel rotation slow to fast clockwise 171 179 Stop at any position 180 255 Gobo wheel rotation slow to fast counterclockwise 0 127 Indexing of the Gobo 0-360 128 178 Gobo rotation slow to fast clockwise 179 204 Stop at any position 205 255 Gobo rotation slow to fast counterclockwise 0 4 Gobo open 5 9 Gobo 1 10 14 Gobo 2 15 19 Gobo 3 20 24 Gobo 4 25 29 Gobo 5 30 34 Gobo 6 35 39 Gobo 7 40 44 Gobo 8 45 49 Gobo 9 50 54 Gobo 10 55 59 Gobo 11 60 64 Gobo 12 65 69 Gobo 13 12 / 24

70 74 Gobo 14 75 79 Gobo 15 80 84 Gobo 16 85 89 Gobo 17 90 94 Gobo 1 shake 95 99 Gobo 2 shake 100 104 Gobo 3 shake 105 109 Gobo 4 shake 110 114 Gobo 5 shake 115 119 Gobo 6 shake 120 124 Gobo 7 shake 125 129 Gobo 8 shake 130 134 Gobo 9 shake 135 139 Gobo 10 shake 140 144 Gobo 11 shake 145 149 Gobo 12 shake 150 154 Gobo 13 shake 155 159 Gobo 14 shake 160 164 Gobo 15 shake 165 169 Gobo 16 shake 170 174 Gobo 17 shake 175 210 Gobo wheel rotation slow to fast clockwise 211 224 Stop at any position 225 255 Gobo wheel rotation slow to fast counterclockwise 0 19 Off 20 39 Open 40 59 Random strobe from slow to fast 60 79 Open 10 Shutter 80 99 Ramp up from slow to fast 100 119 Open 120 139 Ramp down from slow to fast 140 249 Strobe standard from slow to fast 250 255 Open 11 Dimmer 0 255 Linear dimmer 12 Focus 0 255 Linear focus 13 Zoom 0 255 Linear zoom 0 19 No effect 20 99 Indexing prism 360 100 149 Prism rotation from slow to fast clockwise 14 Prism 150 159 Stop at any position 160 209 Prism rotation from slow to fast counterclockwise 210 255 15 Reset 0 33 No function Prism rotation clockwise counterclockwise altering from slow to fast 13 / 24

Channel 34 36 37 79 No function 80 89 Lamp off after 3 seconds when dimmer and shutter are both at 0 Lamp on after 3 seconds when dimmer and shutter are at 255 90 99 No function 100 109 Motor reset after 3 seconds 110 129 No function 130 139 Reset complete after 3 seconds 140 255 No function 4.2.2. Mode 2 Normal mode (17 channels) Value from Value to Description 1 PAN 0 255 Pan 2 PAN f 0 255 Pan fine 3 TILIT 0 255 Tilt 4 TILT f 0 255 Tilt fine 5 PT Speed 0 255 PT speed from fast to slow 0 4 Open white 5 9 Open white + Color 1 10 14 Color 1 15 19 Color 1 + Color 2 20 24 Color 2 25 29 Color 2 + Color 3 30 34 Color 3 35 39 Color 3 + Color 4 40 44 Color 4 45 49 Color 5 + Color 5 50 54 Color 5 55 59 Color 5 + Color 6 6 COLOR 60 64 Color 6 65 69 Color 6 + Color 7 70 74 Color 7 75 79 Color 7 + Color 8 80 84 Color 8 85 89 Color 8 + Color 9 90 94 Color 9 95 99 Color 9 + Color 10 100 104 Color 10 105 109 Color 10 + Color 11 110 114 Color 11 115 119 Color 11 + Color 12 120 124 Color 12 14 / 24

7 Gobo 1 125 129 Color 12 + Color 13 130 134 Color 13 135 139 Color 13 + Color 14 140 144 Color 14 145 149 Color 14 + Open white 150 200 Color rotation from slow to fast clockwise 201 204 Stop at any position 205 255 Color rotation from fast to slow counterclockwise 0 4 Gobo off 5 9 Gobo 1 10 14 Gobo 2 15 19 Gobo 3 20 24 Gobo 4 25 29 Gobo 5 30 34 Gobo 6 35 39 Gobo 7 40 44 Gobo 8 45 49 Gobo 9 50 54 Gobo 1 shake 55 59 Gobo 2 shake 60 64 Gobo 3 shake 65 69 Gobo 4 shake 70 74 Gobo 5 shake 75 79 Gobo 6 shake 80 84 Gobo 7 shake 85 89 Gobo 8 shake 90 94 Gobo 9 shake 95 170 Gobo wheel rotation slow to fast clockwise 171 179 Stop at any position 180 255 Gobo wheel rotation slow to fast counterclockwise 8 Gobo Rot 9 Gobo 0 127 Indexing of the Gobo 0-360 128 178 Gobo rotation slow to fast clockwise 179 204 Stop at any position 205 255 Gobo rotation slow to fast counterclockwise 0 4 Gobo open 5 9 Gobo 1 10 14 Gobo 2 15 19 Gobo 3 20 24 Gobo 4 25 29 Gobo 5 30 34 Gobo 6 35 39 Gobo 7 40 44 Gobo 8 45 49 Gobo 9 15 / 24

50 54 Gobo 10 55 59 Gobo 11 60 64 Gobo 12 65 69 Gobo 13 70 74 Gobo 14 75 79 Gobo 15 80 84 Gobo 16 85 89 Gobo 17 90 94 Gobo 1 shake 95 99 Gobo 2 shake 100 104 Gobo 3 shake 105 109 Gobo 4 shake 110 114 Gobo 5 shake 115 119 Gobo 6 shake 120 124 Gobo 7 shake 125 129 Gobo 8 shake 130 134 Gobo 9 shake 135 139 Gobo 10 shake 140 144 Gobo 11 shake 145 149 Gobo 12 shake 150 154 Gobo 13 shake 155 159 Gobo 14 shake 160 164 Gobo 15 shake 165 169 Gobo 16 shake 170 174 Gobo 17 shake 175 210 Gobo wheel rotation slow to fast clockwise 211 224 Stop at any position 225 255 Gobo wheel rotation slow to fast counterclockwise 0 19 Off 20 39 Open 40 59 Random strobe from slow to fast 60 79 Open 10 Shutter 80 99 Ramp up from slow to fast 100 119 Open 120 139 Ramp down from slow to fast 140 249 Strobe standard from slow to fast 250 255 Open 11 Dimmer 0 255 Linear dimmer 12 Focus 0 255 Linear focus 13 Zoom 0 255 Linear zoom 0 19 No effect 14 Prism 20 99 Indexing prism 360 100 149 Prism rotation from slow to fast clockwise 150 159 Stop at any position 16 / 24

160 209 Prism rotation from slow to fast counterclockwise 210 255 0 33 No function 34 36 37 79 No function Prism rotation clockwise counterclockwise altering from slow to fast Lamp off after 3 seconds when dimmer and shutter are both at 0 Lamp on after 3 seconds when dimmer and shutter 80 89 15 Reset are at 255 90 99 No function 100 109 Motor reset after 3 seconds 110 129 No function 130 139 Reset complete after 3 seconds 140 255 No function 16 Move 0 255 Preprogrammed effects 17 Speed 0 255 Speed for effects from slow to fast Channel 4.2.3. Mode 3 Extended mode (24 channels) Value from Value to Description 1 PAN 0 255 Pan 2 PAN f 0 255 Pan fine 3 TILIT 0 255 Tilt 4 TILT f 0 255 Tilt fine 5 PT Speed 0 255 PT speed from fast to slow 0 4 Open white 5 9 Open white + Color 1 10 14 Color 1 15 19 Color 1 + Color 2 20 24 Color 2 25 29 Color 2 + Color 3 30 34 Color 3 35 39 Color 3 + Color 4 40 44 Color 4 6 COLOR 45 49 Color 5 + Color 5 50 54 Color 5 55 59 Color 5 + Color 6 60 64 Color 6 65 69 Color 6 + Color 7 70 74 Color 7 75 79 Color 7 + Color 8 80 84 Color 8 85 89 Color 8 + Color 9 90 94 Color 9 95 99 Color 9 + Color 10 17 / 24

7 Gobo 1 100 104 Color 10 105 109 Color 10 + Color 11 110 114 Color 11 115 119 Color 11 + Color 12 120 124 Color 12 125 129 Color 12 + Color 13 130 134 Color 13 135 139 Color 13 + Color 14 140 144 Color 14 145 149 Color 14 + Open white 150 200 Color rotation from slow to fast clockwise 201 204 Stop at any position 205 255 Color rotation from fast to slow counterclockwise 0 4 Gobo off 5 9 Gobo 1 10 14 Gobo 2 15 19 Gobo 3 20 24 Gobo 4 25 29 Gobo 5 30 34 Gobo 6 35 39 Gobo 7 40 44 Gobo 8 45 49 Gobo 9 50 54 Gobo 1 shake 55 59 Gobo 2 shake 60 64 Gobo 3 shake 65 69 Gobo 4 shake 70 74 Gobo 5 shake 75 79 Gobo 6 shake 80 84 Gobo 7 shake 85 89 Gobo 8 shake 90 94 Gobo 9 shake 95 170 Gobo wheel rotation slow to fast clockwise 171 179 Stop at any position 180 255 Gobo wheel rotation slow to fast counterclockwise 0 127 Indexing of the Gobo 0-360 8 Gobo Rot 128 178 Gobo rotation slow to fast clockwise 179 204 Stop at any position 205 255 Gobo rotation slow to fast counterclockwise 9 Gobo index 0 255 0-360 Gobo indexing 0-360 10 Index fine 0 255 Gobo index fine 0 4 Gobo open 11 Gobo 5 9 Gobo 1 10 14 Gobo 2 18 / 24

15 19 Gobo 3 20 24 Gobo 4 25 29 Gobo 5 30 34 Gobo 6 35 39 Gobo 7 40 44 Gobo 8 45 49 Gobo 9 50 54 Gobo 10 55 59 Gobo 11 60 64 Gobo 12 65 69 Gobo 13 70 74 Gobo 14 75 79 Gobo 15 80 84 Gobo 16 85 89 Gobo 17 90 94 Gobo 1 shake 95 99 Gobo 2 shake 100 104 Gobo 3 shake 105 109 Gobo 4 shake 110 114 Gobo 5 shake 115 119 Gobo 6 shake 120 124 Gobo 7 shake 125 129 Gobo 8 shake 130 134 Gobo 9 shake 135 139 Gobo 10 shake 140 144 Gobo 11 shake 145 149 Gobo 12 shake 150 154 Gobo 13 shake 155 159 Gobo 14 shake 160 164 Gobo 15 shake 165 169 Gobo 16 shake 170 174 Gobo 17 shake 175 210 Gobo wheel rotation slow to fast clockwise 211 224 Stop at any position 225 255 Gobo wheel rotation slow to fast counterclockwise 12 Shutter 0 19 Off 20 39 Open 40 59 Random strobe from slow to fast 60 79 Open 80 99 Ramp up from slow to fast 100 119 Open 120 139 Ramp down from slow to fast 140 249 Strobe standard from slow to fast 250 255 Open 19 / 24

13 Dimmer 0 255 Linear dimmer 14 Dimmer f 0 255 Dimmer fine 15 Focus 0 255 Linear focus 16 Focus f 0 255 Focus fine 17 Zoom 0 255 Linear zoom 18 Zoom f 0 255 Zoom fine 0 99 Prism rotation from slow to fast clockwise 100 109 Stop at any position 19 110 209 Prism rotation from slow to fast counterclockwise 210 255 20 Index prism 0 255 Index prism 0-360 21 Index P f 0 255 Index prism fine 0 33 No function 34 36 37 79 No function Prism rotation clockwise counterclockwise altering from slow to fast Lamp off after 3 seconds when dimmer and shutter are both at 0 Lamp on after 3 seconds when dimmer and shutter 80 89 22 Reset are at 255 90 99 No function 100 109 Motor reset after 3 seconds 110 129 No function 130 139 Reset complete after 3 seconds 140 255 No function 23 Move 0 255 Preprogrammed effects 24 Speed 0 255 Speed for effects from slow to fast 20 / 24

21 / 24

22 / 24

23 / 24

Importer: B & K Braun GmbH Industriestraße 2 D-76307 Karlsbad www.bkbraun.com info@bkbraun.com 24 / 24