Galaxias Flex LED display User Manual
Conterts Specifications 2 Dimension 3 Attentions 4 Introduction 5 Transportation 6 Installation 7 Maintenance 10 Troubleshooting 11 01
Specifications on Galaxias Series All dimensions are in millimeter Model No Galaxias 6 Galaxias 7 Galaxias 9 Galaxias 12 Galaxias 16 Pixel pitch Density Pixel Configuration Brightness View distance Max.Power Consumption Average.power Consumption Module size W=width H=height T=thickness Weight Work Voltage Brightness level Bit depth per color Bit depth per pixel Visual Angle Date Refresh Rate Display mode Drive mode Signal type Contol Distance Body structure IP Ambient Temperature Relative humidity Power system Installation safety certificate 6.25mm 7.8125mm 9.375mm 12.5mm 16mm 27778 Dot/m² 16384 Dot/m² 11378 Dot/m² 6400 Dot/m² 3906 Dot/m² RGB 3-IN-1 SMD 2600 nit 2730 nit 2100 nit 1650 nit 1300 nit 4.5m 5m 7m 9m 12m 205W/m² 195W/m² 185W/m² 180W/m² 230W/m² 67W/m² 69W/m² 65W/m² 63W/m² 80W/m² W:800mm H:2400mm T:25mm W:1000mm W:600mm W:800mm W:512mm H:2400mm H:2400mm H:3200mm H:3072mm T:25mm T:25mm T:25mm T:25mm 11.5Kg/sq.m 11.0Kg/sq.m 10.4Kg/sq.m 9.8Kg/sq.m 9.2Kg/sq.m DC 24V 16 levels 16 bit 48 bit Horizontal:120 Vertical:120 10000Hz 1280X1024 Constant current AV,S-Video,VGA,CVBS,HDMI,DVI HSYV; <100m Plastic Ip43-20 ~ +50 C 10% ~ 90% Power-600, Power-1200 Power jacket Hang CE FCC ROHS 02
Dimension L W T Diagram1 The panel size can be customized to achieve your needs.manufacturer disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this manual. 03
Attentions: Please read over the attentions before installation Safety remarks If you have questions about how to operate the panel safely, please contact your manufacturer. Be careful from electric shock This product use alternation power 90-260V 50/60Hz The power shall not be linked with power before installation or maintenance Disconnect the power after use The power shall measure up to the Electrical Code, and have ground-protection. Use the appointed connectors by our company Cables are not allowed to get wet in rain One power socket can supply maximum 2 powers ( 2400W ) Please check rated power and all accessories to make sure safety before every use. TECTION FROM FIRE No cover before the screen during display No changes on panels Use spare parts supplied by us for exchanging accessories No use of products above 40 C(104 F )PROTECTION FROM INJURY Truss behind the panels shall support 10 times of screen's weight All connections and screws shall be fixed well before lighting up In order to protect eyes, we should stay away 40cm from the face And no staring at luminous point closely. 04
Introduction The security manual means to show you how to install and repair our Galaxias flexible panel. And it will include attentions and installation. More questions on software please refer to Electronic part. Attention: please read over P1-2 before installation. Unpacking Firstly, thank you for your trust on our products, the features are listed as: 1. We combine the led units into flexible led display, and can show videos and texts, 2. Flexible in use, can be folded or curved into different shapes. 3. The panels are spliced by small modules, so it makes maintenance much easier. 4. Lightweight: makes transportation and installation cost-saved. 5. We use led light as illuminant, about 100,000 hour lifetime. Besides, it is also with lower power consumption and energy-efficient. 6. Lightweight, thin, and flat makes the shape more attractive. 7. The structure is easy for install and maintenance. Package: 1. With 4 pcs one module (the size and quantity of package may be fluctuated with customers' demand) 2. 2 sets of Power-1200 3. 1 set of HC-103D controller ( one pc controls one panel, and if you use Colorlight software, sending card is not necessary.) 4. 4 pcs headers 5. 8 pcs contraction band 6. 1 pcs net cable ( 1 cable for each order) 7. Users' manual, and software specifications are also for free. Each order with one set. 05
Using for the first time 1 Please read over the security attentions from P4-5. 2. Please check the local voltage and ensure it conform to the range of 90-260V 50/60Hz 3. Make sure the rated input power and current measure up to the standard. Transportation The features of Galaxias: light, thin, small and flexible, the units of moduels can be combined as users' wish. The single moduel can be fold to unidirectional, it will be more convenient for transportation and storage. Warning! The folding pattern must be following the sketch pictures, otherwise all the damage will be assumed by the users The folding pattern of Galaxias-16, Galaxias-12: The above models can only fold forward, it is very easy to damage the screens if folding backward. Screen Back Screen Back Diagram2 The folding pattern of Galaxias-9, Galaxias-7, Galaxias-6: The above models can only fold backward; it is very easy to damage the screens if folding forward. Screen Back Screen Back Diagram3 06
Installation Warning! The appropriate facility, place, hardware, hanging structure and electric conditions are necessary. Warning! The installation of this series of products must be operated by the professionals, please consult manufacturer if there is any question. Warning! The default installation of the screen is girder hanging, please consult the professionals if using other installations. 1 Hanging Screen A B C D E Diagram4 Steps: 1 Unfold the screen E, distinguish the direction of up an down, and hang the screen E to the A position of the girder. 2 Make the contraction band B go through the A position of the girder, and make sure the hook C locking the D shape buckle. 07
2 Vertical combinations Diagram5 Steps: 1. Loose the combination buckle of the under screen Display B and lock the screw B. 2. Aligning the up and under screen, insert the combination buckle A into the combination buckle B, and flattening the screen, tightening the buckle and screw B. 3 Horizontal combination Diagram6 Steps: 1. Loose the combination buckle of the left screen Display A and lock the screw B. 2. Aligning the left and right screen, insert the combination buckle A into the combination buckle B, and flattening the screen,tightening the buckle and screw B. 08
AC Input Diagram7 All the electrical connection of Galaxias are completed by connector 09
The electrical connection between modules. Signal connection: connecting the male and female plugs between two screens. Diagram8 Power connection: the screen's input power plug connects the DC output plug seat of power box, every piece of screen's power is supplied by power box independently. Diagram9 Warning! The connectors can be connect successfully only when they are a pair, if the connector can't be insert, it should change other connectors. These two kinds of connectors are both low voltage, please do not connect with high voltage. The screen and video processor are connected with net cable. There are two groups of net cables, one is for output signal, another is for input signal, the input net cable and video processor's cable are connected by contactor, output net cable is connected with the output net cable of next screen, the rest can be done by the same manner. The connection of power, using a DC out put cable to connect the power output cable, the DC output cable has the options of 1.5 meters, 3 meters, 5 meters and 10 meters, the power box can be put under the screen when the chosen cable is more than 3 meters; the power box should be fix on the girder (or similar supporter)above the screen. One side of the DC output cable is connected on the DC output port, another side is connected the power input cable of screen by connector. 10
Warning! The power supply must be switched on, after all the connections are examined to make sure they are correct. Warning! All the operations of electrical connection must be operated before the power supply is switched on. Warning! The earth connection must be examined to be qualified before the power supply is switched on. Warning! The power supply can't be poured by rain or any water on it. Maintenance Warning! The power supply must be cut off before all the operations of maintaining. Warning! The maintaining must be operated by professionals. Warning! The washing must be used by alcohol, water is forbidden. 10
Troubleshooting Problem Probable cause(s) Remedy Panel is completely dead. No power to panel. Fuse blown Defective PSU (power supply unit). Incorrect panel settings on control.system Check power and connections. Disconnect panel from power. Contact professional person for service. Disconnect panel from power.contact Professional personfor service. Check settings (display addresses, panel DeviceProperties, etc.). One or more panels displays video incorrectly or does not display video at all. All panels and/or monitor screen display video incorrectly or do not display video at all. Display cuts out intermittently. Fault on line connection Panel defective. Other device (e.g. Ethernet switch) on line connection defective. Incorrect video input or panel settings on System Controller. Unusable video signal or defective video source. Fault on line connection. Device on line connection Panel is too hot. Fault on line connection Inspect connections and cables. Correct poor connections. Repair or replace damaged cables. Have faulty panel serviced by service technician. Replace with a device known to be operating correctly. Have faultydevice tested and serviced. Check settings (PAL/SECAM/ NTSC selection, overall panel intensity setting, etc.) Check video source Inspect connections and cables. Correct poor connections. Repair or replace damaged cables. Have faulty panel or device tested and serviced by service technician or supplier. Ensure free airflow around spine. Check that ambient temperature does not exceed max. permitted level. Contact professional person for service. Inspect connections and cables. Correct poor connections. Repair or replace damaged cables. One LED module cuts out. Device on line connection LED module incorrectly installed and connected. LED module faulty. Have faulty panel or device tested and serviced by service technician or supplier. Check module. Replace LED module, contact the manufacturer 11