Kulka Military Class (--595) / (MIL-T-556*) Military Class: Closed ack Supercedes MIL-T-595 These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting holes are covered with molded-in reinforcement straddle plates. 7T0 --595/ MIL-T-556 Terminal Type Voltage Current Wire & Lug Information Information Military/Navy Terminal locks Class Spec # Description Max Dielectric Max Screw RECMD Max MS7 Max Lug RECMD Torque Rated with Test Rated Size Wire Size Lug # Width Lb-In (N-M) 7 T / Double Screw 00 V 000 V 5 mp 0 8-0 #6 #6 WG - RMS RMS 60 Hz [7.] [0.9-.] 8 T / Double Screw 600 V 00 V 0 mp 0 8-0 #6 # WG - RMS RMS 60 Hz [0.9-.] 9 T / Double Screw 600 V 000 V 0 mp 0. 0- #8 #0 WG -9 RMS RMS 60 Hz [0.] [.-.] 0 T / Single Screw 00 V 000 V 7.5 mp 0 8-0 #6 #8 WG -0 Feed Thru RMS RMS 60 Hz [7.] [0.9-.] T / 5 Single Screw 600 V 00 V 0 mp 0 8-0 #6 #6 WG - Feed Thru RMS RMS 60 Hz [0.9-.] T / 6 Single Screw 600 V 000 V 5 mp 0. 0- #8 # WG -8 Feed Thru RMS RMS 60 Hz [0.] [.-.] *Marathon Special Products manufactures terminal blocks that are constructed to meet MIL-T-556C and --595. Mil standard --595, dated September 6, 997, superceeds MIL-T-556C. We will continue to supply the same parts for this spec. The CID identifier will be the same class number as for MIL-T-556C. The old MIL-T-556C standard required Group and Group testing. The Group testing was required every three years. Since the new --595 standard does not require Group testing, we have elected to discontinue this test. We will continue to do Group testing. The following blocks are effected by this change: Class/Spec # 7T / 8T / 9T / 0T / T / 5 T / 6 CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Kulka Military Class (--595) / (MIL-T-556) 7T-/0T- Series 00 Volts C/DC Specifications: ase, Valox 0-SEO, Grey Color, 0 C Closed ack Design Screws, rass Nickel Plate, 6- inder Head, Slotted Terminals, rass Nickel Plate, Ultrasonically Inserted -0 Poles, Consult Customer Service for Longer Lengths /8 Centers Flammability Rating 9 V-O Wire Size #6 5 mps Parts are supplied with end plates RoHS Compliant 7T0 0T0 Catalog Number Dimensions Number of Poles 7T0.. 7T0.78 7T0.88 7T05 5.5 7T06 6.9.6 7T07 7.00 7T08 8.66 7T09 9.0.75 7T0 0.. 7T.78 7T 5.88 7T 5.5 5 7T 5.9 5.6 7T5 5 6 6.00 7T6 6 6.66 6 7T7 7 7.0 6.75 7T8 8 7. 7. 7T9 9 7.78 7 7T0 0 8 7.88. [.6] Hardware Options: Lug Types (Commercial): / ST 600 = Half Solder See Page 0 ST600 = Full Solder See Page 0 Feed-Thru Hardware Options: Long Feed-Thru Solder 0T Only ccessories: (Jumper Commercial Grade) Marking Strips = MS, MS, MSC See Page Jumper = J600, 600RJ, 600RJ(S) See Page 0 Service Options: Consult Customer Service.7 [.].8 [.]. [8.] Military/Navy Terminal locks.87 [.] #6- X.[5.7] D HD SCREW CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Military/Navy Terminal locks 7T-Military Class (--595/)/(MIL-T-556/) Plastic: Grade F temperature rating 55 C per MIL-M- Screws: rass per QQ-W-, nickel plated per QQ-N-90 Terminal Plates: rass per QQ--6, nickel plated per QQ-N-90. [.6] Rated voltage (maximum): 00 volts Current rating: 5 mps D.W.V.: 000 volts RMS.0 [7.6] 8T-Military Class (--595/)/(MIL-T-556/) Plastic: Grade F temperature rating 55 C per MIL-M- Screws: rass per QQ-W-, nickel plated per QQ-N-90 Terminal Plates: rass per QQ--6, nickel plated per QQ-N-90 Rated voltage (maximum): 600 volts Current rating: 0 mps D.W.V.: 00 volts RMS [.0]. [8.] #6- X.[5.7] D HD SCREW #6- UNC- x [6.] D HD SCREW Kulka Military Class (--595) / (MIL-T-556) [.].0 [ 5.0]. [0.7].8 [0.8].6 [.6]. [8.].88 [.] [.].9 [9.9]. [8.6] Designation of poles 7T 0 F.60-.5.09-.56 7T 0 F.75-.88.8-.5 7T 0 F.0-.0.859-.906 7T 05 F 5 0-.59.- 7T 06 F 6.876-.969.609-.656 7T 07 F 7 0-..98-.0 7T 08 F 8.66-.79.59-.06 7T 09 F 9.000-.09.7-.78 7T 0 F 0.76-.69.09-.56 7T F.750-.8.8-.5 7T F 5.6-5.9.859-.906 7T F 50-5.59 5.-5 7T F 5.876-5.969 5.609-5.656 7T 5 F 5 60-6.65 5.969-6.07 7T 6 F 6 6.66-6.75 6.-6. 7T 7 F 7 7.000-7.09 6.79-6.797 7T 8 F 8 7.76-7.85 7.09-7.7 7T 9 F 9 7.75-7.8 7.69-7.57 7T 0 F 0 8.7-8.87 7.8-7.9 7T F 8-8 8.9-8.97 7T F 8.877-8.97 8.59-8.67 7T F 9-9 8.969-9.07 7T F 9.67-9.687 9.-9. 7T 5 F 5 0.00-0.06 9.79-9.797 7T 6 F 6 0.77-0.7 0.09-0.7 7T 7 F 7 0.75-0.8 0.69-0.57 7T 8 F 8.7-.87 0.8-0.9 7T 9 F 9 -.9-.97 7T 0 F 0.877-.97.59-.67 7T F -.969-.07 mm=dim X 5. Designation of poles 8T 0 F.579-.67.96-. 8T 0 F.06-.09.7-.78 8T 0 F.5-.57.7-.9 8T 05 F 5.89-.98.609-.656 8T 06 F 6.9-..06-.09 8T 07 F 7.766-.859.8-.5 8T 08 F 8.0-.97.97-.98 8T 09 F 9.6-.7.75-. 8T 0 F 0 5.079-5.7.8-.859 8T F 5.5-5.65 50-5.97 8T F 5.969-6.078 5.687-5.7 8T F 6.07-6.56 6.0-6.88 8T F 6.8-6.95 6.57-6.65 8T 5 F 5 7-7.9 6.985-7.06 8T 6 F 6 7.79-7.88 7.-70 8T 7 F 7 8.57-8.66 7.860-7.98 8T 8 F 8 8.59-8.70 8.97-8.75 8T 9 F 9 9.079-9.56 8.750-8.88 8T 0 F 0 9.57-9.59 9.88-9.66 8T F 9.95-0.0 9.65-9.70 8T F 0.9-0.69 0.06-0. 8T F 0.89-0.906 00-0.578 mm=dim X 5. CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Kulka Military Class (--595) / (MIL-T-556) 9T-Military Class (--595/)/(MIL-T-556/) Plastic: Grade F temperature rating 55 C per MIL-M- Screws: rass per QQ-W-, nickel plated per QQ-N-90 Terminal Plates: rass per QQ--6, nickel plated per QQ-N-90 Rated voltage (maximum): 600 volts Current rating: 0 mps D.W.V.: 000 volts RMS.0 [5.]. [0.8] [.] [ 5.7].9 [7.].5 [.] [.] Designation of poles 9T 0 F.07-.0.67-.79 9T 0 F.66-.79.- 9T 0 F.88-.796-.8 9T 05 F 5.750-.8.59-.06 9T 06 F 6 -.06.9-.969 9T 07 F 7.876-.969.8-.5 9T 08 F 8 5.8-5.5 5.06-5.09 9T 09 F 9 6.000-6.09 5.65-5.67 9T 0 F 0 6-6.67 6.7-60 9T F 7.6-7.5 6.79-6.797 9T F 7.688-7.797 7.97-7.75 9T F 80-8.59 7.860-7.98 9T F 8.8-8.9 8.-80 9T 5 F 5 9.76-9.85 8.985-9.06 9T 6 F 6 9.98-0.07 9.57-9.65 9T 7 F 7 00-0.609 0.0-0.88 9T 8 F 8.079-.88 0.67-0.750 mm=dim X 5. #8- UNC- x D HD SCREW 0T-Military Class (--595/)/(MIL-T-556/) Same as 7 T Class Hardware: Lug, rass per QQ--6, tin plated Rated voltage (maximum): 00 volts Current rating: 7.5 mps D.W.V.: 000 volts RMS. [.6].0 [7.6] #6- UNC- x D HD SCREW FEED THRU SOLDER LUG [.] [.].6 [.6]. [8.].88 [.] Designation of poles 0T 0 F.60-.5.09-.56 0T 0 F.75-.88.8-.5 0T 0 F.0-.0.859-.906 0T 05 F 5 0-.59.- 0T 06 F 6.876-.969.609-.656 0T 07 F 7 0-..98-.0 0T 08 F 8.66-.79.59-.06 0T 09 F 9.000-.09.7-.78 0T 0 F 0.76-.69.09-.56 0T F.750-.8.8-.5 0T F 5.6-5.9.859-.906 0T F 50-5.59 5.-5 0T F 5.876-5.969 5.609-5.656 0T 5 F 5 60-6.65 5.969-6.07 0T 6 F 6 6.66-6.75 6.-6. 0T 7 F 7 7.000-7.09 6.79-6.797 0T 8 F 8 7.76-7.85 7.09-7.7 0T 9 F 9 7.75-7.8 7.69-7.57 0T 0 F 0 8.7-8.87 7.8-7.9 0T F 8-8 8.9-8.97 0T F 8.877-8.97 8.59-8.67 0T F 9-9 8.969-9.07 0T F 9.67-9.687 9.-9. 0T 5 F 5 0.00-0.06 9.79-9.797 0T 6 F 6 0.77-0.7 0.09-0.7 0T 7 F 7 0.75-0.8 0.69-0.57 0T 8 F 8.7-.87 0.8-0.9 0T 9 F 9 -.9-.97 0T 0 F 0.877-.97.59-.67 0T F -.969-.07 mm=dim X 5. Military/Navy Terminal locks CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Kulka Military Class (--595) / (MIL-T-556) T-Military Class (--595/5)/(MIL-T-556/5) Same as 8 T Class Hardware: Lug, rass per QQ--6, tin plated Rated voltage (maximum): 600 volts Current rating: 0 mps D.W.V.: 00 volts RMS [.0]. [8.] FEED THRU SOLDER LUG #6- UNC- x [6.] D HD SCREW.0 [ 5.0]. [0.7].8 [0.8] [.].9 [9.9]. [8.6] Designation of poles T 0 F.579-.67.96-. T 0 F.06-.09.7-.78 T 0 F.5-.57.7-.9 T 05 F 5.89-.98.609-.656 T 06 F 6.9-..06-.09 T 07 F 7.766-.859.8-.5 T 08 F 8.0-.97.97-.98 T 09 F 9.6-.7.75-. T 0 F 0 5.079-5.7.8-.859 T F 5.5-5.65 50-5.97 T F 5.969-6.078 5.687-5.7 T F 6.07-6.56 6.0-6.88 T F 6.8-6.95 6.57-6.65 T 5 F 5 7-7.9 6.985-7.06 T 6 F 6 7.79-7.88 7.-70 T 7 F 7 8.57-8.66 7.860-7.98 T 8 F 8 8.59-8.70 8.97-8.75 T 9 F 9 9.079-9.56 8.750-8.88 T 0 F 0 9.57-9.59 9.88-9.66 T F 9.95-0.0 9.65-9.70 T F 0.9-0.69 0.06-0. T F 0.89-0.906 00-0.578 mm=dim X 5. Military/Navy Terminal locks T-Military Class (--595/6)/(MIL-T-556/6) Same as 9 T Class Hardware: Lug, rass per QQ--6, tin plated Rated voltage (maximum): 600 volts Current rating: 5 mps D.W.V.: 00 volts RMS.0 [5.] [.] [ 5.7] [7.].5 [.] Designation of poles T 0 F.07-.0.67-.79 T 0 F.66-.79.- T 0 F.88-.796-.8 T 05 F 5.750-.8.59-.06 T 06 F 6 -.06.9-.969 T 07 F 7.876-.969.8-.5 T 08 F 8 5.8-5.5 5.06-5.09 T 09 F 9 6.000-6.09 5.65-5.67 T 0 F 0 6-6.67 6.7-60 T F 7.6-7.5 6.79-6.797 T F 7.688-7.797 7.97-7.75 T F 80-8.59 7.860-7.98 T F 8.8-8.9 8.-80 T 5 F 5 9.76-9.85 8.985-9.06 T 6 F 6 9.98-0.07 9.57-9.65 T 7 F 7 00-0.609 0.0-0.88 T 8 F 8 0.079-.88 0.67-0.750 mm=dim X 5..9 [.]. [0.8] FEED THRU SOLDER LUG #8- UNC- x D HD SCREW CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Kulka Military Class (--595) / (MIL-T-556) *Solder Hardware Dimensions are not to Mil Spec 7TLD (Commercial Equivalent) [.0].75 [9.] [7.5] [.0] [.0].0 [.76] 7TLS (Commercial Equivalent).5 []. [5.9] [.0].9 [].0 [0.8] [.].06 [.6] Ø.09 [.] ( HOLES) Ø. ( HOLES) [.6] This is an assembly of the 7T Class Terminal oard and a two-sided terminal lug (ST600). vailable in lengths from terminals through terminals. Lugs are brass, tin plated. [.].06 [.6] Ø. -HOLES [.6] Ø.09 HOLE [.] This is an assembly of the 7T Class Terminal oard and a one-sided terminal lug (/ ST600). vailable in lengths from terminals through terminals. Lugs are brass, tin plated. 8TLD (Commercial Equivalent).58 [0.].9.58 [0.] 8TLS (Commercial Equivalent).58 [5]. [8.].7 [9.7]. [].8 [.].06 [.9].06 [.9].06 [.6]. [] Ø. -HOLES [.] Ø.5 -HOLES [.8] This is an assembly of the 8T Class Terminal oard and a two-sided terminal lug (ST60). vailable in lengths from terminals through terminals. Lugs are brass, tin plated. 9TLD (Commercial Equivalent).85 [7.0].85 [7.0].06 [6.9].9 [.9].07 [0.9].06 [.6] Ø.5 -HOLES [.8] Ø. -HOLES [.] This is an assembly of the 8T Class Terminal oard and a one-sided terminal lug (/ ST60). vailable in lengths from terminals through terminals. Lugs are brass, tin plated. 9TLS (Commercial Equivalent) [8].9 [9.9].7 [.8] [].07 [0.9] Military/Navy Terminal locks. [0].09 [.] [] Ø. -HOLES [.] Ø.77 -HOLES [.5]. [0].09 [.] Ø. HOLE [.] Ø.77 -HOLES [.5] This is an assembly of the 9T Class Terminal oard and a two-sided terminal lug (ST60). vailable in lengths from terminals through 8 terminals. Lugs are brass, tin plated. This is an assembly of the 9T Class Terminal oard and a one-sided terminal lug (/ ST60). vailable in lengths from terminals through 8 terminals. Lugs are brass, tin plated. To ensure solderability, use within six (6) months. CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Kulka Military Class Marking Strips Marking Styles MS, MS, MSC Top Surface of Marking Strip MS MS MSC (blank) ottom Surface of Marking Strip MS MS (blank) MSC (blank) Military/Navy Terminal locks Requirements: Type Mount: Dimensions: Material: Marking: ottom Only See Page 0 for Charts Type GME Marking Strips shall be Marked in ccordance with CID --595 (can be provided to MIL T556) single letter shall be inserted in the above type designation to specify the marking style (, or C). oth the front and the back of the marking strips shall be marked as indicated. The numbers shall be marked at a 5 ± angle with reference to the side of the marking strip, as indicated. Type MSC7T (blank single sided marking strip) shall have the same dimensions as type MS. CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Kulka Navy Class (--595) / (MIL-T-556*) Notes: Molded material is MI-60 in accordance with MIL-M- ( + Molded material is GDI0F). The stud connector for these terminal boards is considered part of the stud and is required, unless otherwise specified. With the stud connector removed, the terminal board will provide twice the number of connection points and allow for an additional wire per terminal. Nuts and connectors are provided when appropriate. They are unplated brass and shipped unassembled. T08F --595/ MIL-T-556 Terminal Type Voltage Current Wire & Lug Information Information Class Spec # Description Max Dielectric Max Screw RECMD Max MS7 Max Lug RECMD Torque Rated with Test Rated Size Wire Size Lug # Width Lb-In (N-M) T / 9 Single Stud 600 V 000 V 5 mp 0.95 6-8 #8 #0 WG - Single Row RMS RMS 60 Hz [0.0] [.8-.0] T / 0 Single Stud 600 V 00 V 0 mp 0.95 6-8 #8 # WG - Double Row RMS RMS 60 Hz [0.0] [.8-.0] 5 T / Feed Thru Stud 600 V 00 V 50 mp 0.95 6-8 #8 #0 WG - Single Row RMS RMS 60 Hz [0.0] [.8-.0] 6 T / Single Stud 600 V 00 V 0 mp 0.07 0- #6 # WG -5 Double Row RMS RMS 60 Hz [7.8] [.-.] 7 T / Feed Thru Stud 600 V 00 V 0 mp 0.07 0- #6 # WG -6 Single Row RMS RMS 60 Hz [7.8] [.-.] 8 T Double Stud 00 V 500 V 0 mp 0 8-0 / #5 # WG - 8 THT + Double Row RMS RMS 60 Hz [7.] [0.9-.] 9 T / 5 Single Stud 00 V 500 V 5 mp 0.07 0- #6 # WG Single Row RMS RMS 60 Hz [7.8] [.-.] 0 T / 6 Single Stud 600 V 00 V 0 mp 0. 0- #6 # WG Double Row RMS RMS 60 Hz [6.] [.-.] T / 7 Feed Thru Stud 600 V 00 V 0 mp 0. 0- #6 # WG -5 Single Row RMS RMS 60 Hz [6.] [.-.] 5 T / 9 Single Stud 600 V 00 V 0 mp 0.07 6-8 #8 # WG -8 Double Row RMS RMS 60 Hz [7.8] [.8-.0] 6 T / 0 Single Stud 000 V 000 V 0 mp 0.95 6-8 #8 # WG - Double Row RMS RMS 60 Hz [0.0] [.8-.0] 7 T / Double Stud 600 V 00 V 0 mp 0.95 0- #6 # WG - Double Row RMS RMS 60 Hz [0.0] [.-.] 8 T / Single Stud 600 V 00 V 5 mp 0.95 6-8 #8 #0 WG - Single Row RMS RMS 60 Hz [0.0] [.8-.0] 5 T Single Stud 00 V 500 V 5 mp 0. 6-8 / # # WG -7 5 THT + Single Row RMS RMS 60 Hz [6.] [0.7-0.9] 6 T Double Stud 00 V 500 V 0 mp 0. 6-8 / # #6 WG -0 6 THT + Double Row RMS RMS 60 Hz [6.] [0.7-0.9] *Marathon Special Products manufactures terminal blocks that are constructed to meet MIL-T-556C and --595. Mil standard --595, dated September 6, 997, superceeds MIL-T-556C. We will continue to supply the same parts for this spec. The CID identifier will be the same class number as for MIL-T-556C. Military/Navy Terminal locks The old MIL-T-556C standard required Group and Group testing. The Group testing was required every three years. Since the new --595 standard does not require Group testing, we have elected to discontinue this test. We will continue to do Group testing. The following blocks are effected by this change: Class/Spec # T / 9 6T / 9T / 5 5T / 9 8T / T / 0 7T / 0T / 6 6T / 0 5T / 5T / 8T / T / 7 7T / 6T / CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
T SERIES (--595/9) / MIL-T-556/9) Kulka Navy Class (--595) / (MIL-T-556).R.59 [5] 7 [87.5] 6.88 [7.8] 5 6. ±.00 [0] 7 8 9 0.06 [6.9] NO. 8- NC- STUD [] NOTE: 0 TERMINLS 0 NUTS MOUNT WITH NO. 0 SCREW (-REQ'D) [6].88 [] [] T SERIES (--595/0) / (MIL-T-556/0). ±.00 [0.].5 [.5] # of Dim. Dim. Term Nuts T 08F 8.88 8 T 0F 0 6 6.00 0.R MOUNT WITH NO.0 SCREW 5 6 7 8.8 [0.6].59 REF. [.9].8 [6.0] NO.8- NC- STUD.78 [9.8] Military/Navy Terminal locks 5T SERIES (--595/) / (MIL-T-556/) Single Row, Through Connection # of Dim. Dim. Term Nuts 5 T 08F 8 6. 5 6 5 T 0F 0 7 6.88 0 6T SERIES (--595/) / (MIL-T-556/). R [.79].59 [5] 5 MOUNT WITH NO. 0 SCREW (-REQ'D). ±.00 [0.] 6 7 8 9 0 [6]. [8.].06 [6.9] [6] [.9] NO.8- NC- STUD # of Dim. Dim. Term Nuts 6 T 06F 6.00 6 6 T 0F 0.88 0 6 T F 6 6.00.R [.79] 5 6 MOUNT WITH NO. 0 SCREW 7 8 9 0.5 [] [7.5] [6.5] NO.6- NC- STUD [9] CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Kulka Navy Class (--595) / (MIL-T-556) 7T SERIES (--595/) / (MIL-T-556/) R.09 [.] [5.] [] 5 6 [65.] 6.00 6 7 8 9 0.75 [9.] 8T SERIES (--595/) / (MIL-T-556/) Double Row, Linked Front Connection [5.5] MOUNT WITH NO.8 SCREW # of Term. w/stud w/o stud connectors connectors Dim. Dim. Nuts 8 T 0F 8 T 06F 6..75 8 T 08F 8 6.88 6 8 T 0F 0 0 0 8THT also available 9T SERIES (--595/5) / (MIL-T-556/5) Single Row, Front Connection # of Type Term. Dim. Nuts 9 T 0F.8 9 T 0F.7 0T SERIES (--595/6) / (MIL-T-556/6).5 [8.9] # of Type Term. Dim. Dim. Dim. C Nuts 0 T 8F 8. 0 8 0 T 8F 8 6 6.00 0 8 T SERIES (--595/7) / (MIL-T-556/7) Single Row, Through Connection # of Type Term. Dim. Dim. Dim. C Nuts T 0F.00 0 8 T 06F 6.88 0 T F 6 6.00 0 8 R.09 [.] MOUNTS WITH NO. 8 SCREW R.09 [.].9 [.7]. [5.]. [8.] [5.5].60 [5.].0 [7.9] SECTION - 5 6 [9.7] 7 8 9 0. ±.00 [8.] C.8 [] NOTE: TERMINLS NUTS 6- UNC- STUD Ø.0 [5.0].0 [0.] MOUNT WITH NO. 8 SCREW (-REQ'D) NO. 6- NC- STUD R. MOUNTS WITH NO. 0 SCREW C [.].88 [.] NO. 5-0N C - STUD.70 [7.7].9 [.0] NO. 6- NC- STUD.00 [5.] [8.0] [7.5].00 [5.] Military/Navy Terminal locks CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Military/Navy Terminal locks 5T SERIES (--595/9) / (MIL-T-556/9) Number of Type Terminals Dim. Dim. Nuts 5 T 0F 0.88 0 5 T F 6 6.00 6T SERIES (--595/0) / (MIL-T-556/0) Number of Type Terminals Dim. Dim. Nuts 6 T 0F.88 6 T 0F 0 6 6.00 0 7T SERIES (--595/) / (MIL-T-556/) Number of Terminals Type Dim. Dim. w/stud w/o stud connectors connectors 5T SERIES (--595/) / (MIL-T-556/) Kulka Navy Class (--595) / (MIL-T-556) Nuts 7 T 0F 0 0 6 6.00 0 Single Row, Front Connection Type # of Term. Dim. Dim. Nuts 5 T 0F.06 5 T 05F 5.00 5 5 T 06F 6 6 5 T 07F 7.9 7 5 T 09F 9 9 5 T 0F 0.88 0 5 T F.9 5THT also available R. #6- x /6 D HD SCREW MOUNTS WITH #0 SCREW [.0].9 [.8] R. [.] 5 6 7 8 9 0 MOUNTS WITH NO. 0 SCREW (-REQ'D) R. [6.] [6.] 5 6.5 [.5] MOUNTS WITH NO. 0 SCREW 6 [65.] 6.00 [5.].5 [.5]. [0.].5 [8.8] 5.8 [0.6] [.] 7 8. [8.] #8- NC- STUD. [0.].5 [.8] [7.5].5 [.5].8 [0.6] [.] #6- NC- INSERT.78 [9.8].8 [6.0] [6.5] NO. 8- NC- STUD.8 [6.0] MOUNTS WITH #6 SCREW NO.8- N C- STUD SECTION - 6.00 [5.] #-0 NC- STUD.78 [9.8] DESIGNTION PLTE FOR 7T ORD. (MT'L TYPE GME).06 [.6] 6T SERIES (--595/) / (MIL-T-556/) Double Row, Linked Front Connection # of Term. w/stud w/o stud Type connectors connectors Dim. Dim. Nuts 6 T 06F 6 6 T 08F 8 6.9 6 6 T 0F 0 0.88 0 6 T F.9 6THT also available [.0].5 [.8] 5 6 7 8 9 0.9.5 [.8] [8.9] MOUNTS WITH #6 SCREW.67 [7.0] [9.6] #-0 NC- STUD CTi utomation - Phone: 800.89.0 - Fax: 08.68.05 - Web: www.ctiautomation.net - Email: info@ctiautomation.net