suitable sensor can be selected from the W 9- series. Overview of the sensors: WT 9-, with adjustable background suppression, max. scanning distance 0 mm, WT 9-, energetic, max. scanning distance 0 mm, WT 9-, V model, max. scanning distance 0 mm, WL 9-, basic model, T max. scanning range m, WL 9-, Teach-In model, max. scanning range m, The W 9- series is as versatile WL 9-, focus, as the tasks in automation. max. scanning range 0. m. The standardized, compact hous- Photoelectric proximity switches HGA ing model makes it possible to There are multifaceted appli- use high-performance sensors cations in the targeted main that operate reliably even in branches thanks to this great cramped mounting conditions. variety of products: Photoelectric proximity switches ener. All W 9- models have red light Photoelectric proximity switches V Photoelectric reflex switches transmitters as a standard fea- Storage and handling engineering ture. The sensor can be aligned Packaging industry on the object quickly and precise- Electronics industry ly using the visible light spot. Elevator construction. In the models with Teach-In function, the sensor optimizes its sensitivity automatically to the given operating conditions at the push of a button. D Depending on the job, the most A T A S H E E T W 9-: A Versatile, Complete and Compact Series
WT 9- Photoelectric Proximity Switch with Background Suppression Scanning distance 0... 0 mm Photoelectric proximity switch Dimension illustration LED light source, visible red light Background suppression Scanning distance adjustable Switching frequency 00/s Outputs short-circuit protected 7 8. 0.. 0 0 Setting options WT 9-P0 WT 9-P0 WT 9-N0 WT 9-N0 WT 9-P0 WT 9-P60 6 7 Axis of the sender optics Axis of the receiver optics ounting hole Ø. mm LED signal strength indicator Plug or 8, pin, m connection cable or 0 mm cable with plug, pin Scanning distance adjuster Standard direction of the material to be scanned 6 Connection type WT 9-P0 WT 9-N0 WT 9-P0 WT 9-P0 WT 9-N0 WT 9-P60 Accessories ounting bracket Cable receptacles Adapter plate pin, pin, 8 x 0, mm pin, with 0 mm cable
WT 9- Technical data WT 9- P0 P0 N0 N0 P0 P60 Scanning distance adjustable ) 0... 0 mm Scanning range... 0 mm Supply voltage V ) S DC 0... 0 V Ripple ) V PP Current consumption ) 0 ma Light source LED, visible red light ) Light spot diameter Switching outputs and Signal voltage HIGH Signal voltage LOW 6) Output current I A max. x mm at a distance of 00 mm PNP NPN.9 V Approx. 0 V. V 00 ma Response time 7) µs Switching frequency max. 8) 00/s Connection technology Connection cable, m Cable, 0 mm, with plug, pin Plug, pin Plug 8, pin VDE protection class 9) VDE protection class 8 9) III Protection type IP 67 Protection circuits 0) A, B, C Ambient temperature ) Operation 0... +60 C Storage 0... +7 C Weight with connection cable m/0 mm Approx. 80 g with equipment plug / 8, pin Approx. 0 g ) Object with 90% reflectance (referred to standard white DIN 0) ) Limit values ) ust be within tolerances ) Without load ) Average service life at room temperature 00,000 h 6) At T U = + C and 00 ma output current 7) With resistive load 8) With light/dark ratio : 9) Withstand voltage 0 V 0) A = supply connections reverse polarity protected B = outputs short-circuit protected C = interference suppression ) Do not distort cable below 0 C Scanning distance 0 0 0 0 0 0 0(mm) 0 00 0 00 0 Operating distance 0 0 WT 9- HGA Ordering information WT 9-P0 08 9 WT 9-P0 08 9 WT 9-N0 08 9 WT 9-N0 08 96 WT 9-P0 09 06 WT 9-P60 09 7 Scanning range on black ), white background, Black = 6% reflectance Scanning range on gray, white background, Gray = 8% reflectance Scanning range on white, white background, White = 90% reflectance % of scanning distance 6%/90% 0 8%/90% 90%/90% 0 (mm) 0 00 0 00 0
WT 9- Photoelectric Proximity Switch, Energetic, Teach-In Scanning distance 8... 0 mm Photoelectric proximity switch Dimension illustration Red-light emitter LED as alignment aid Scanning distance adjustable Switching frequency 800/s Outputs short-circuit protected Teach-In. 6.. 0 0 Setting options WT 9-P WT 9-P WT 9-N WT 9-N WT 9-P WT 9-P6 6 Axis of the receiver optics Axis of the sender optics ounting hole Ø. mm LED signal strength indicator Plug or 8, pin, m connection cable or 0 mm cable with plug, pin Scanning distance adjuster, teachable 6 Connection type WT 9-P WT 9-N WT 9-P WT 9-P WT 9-N WT 9-P6 Accessories ounting bracket Cable receptacles Adapter plate pin, pin, 8 x 0, mm pin, with 0 mm cable
WT 9- Technical data WT 9- P P N N P P6 Scanning distance adjustable ) 0... 0 mm Supply voltage V ) S DC 0... 0 V Ripple ) V PP Current consumption ) 0 ma Light source LED, visible red light ) Light spot diameter Switching outputs and Signal voltage HIGH Signal voltage LOW 6) Output current I A max. 80 x 80 mm at a distance of 00 mm PNP NPN.9 V Approx. 0 V.9 V 00 ma Response time 7) 6 µs Switching frequency max. 8) 800/s Connection technology Connection cable, m Cable, 0 mm, with plug, pin Plug, pin Plug 8, pin VDE protection class 9) VDE protection class 8 9) III Protection type IP 67 Protection circuits 0) A, B, C Ambient temperature ) Operation 0... +60 C Storage 0... +7 C Weight with connection cable m/0 mm Approx. 80 g with equipment plug / 8, pin Approx. 0 g ) Object with 90% reflectance (referred to standard white DIN 0) ) Limit values ) ust be within tolerances ) Without load ) Average service life at room temperature 0,000 h 6) At T U = + C and 00 ma output current 7) With resistive load 8) With light/dark ratio : 9) Withstand voltage 0 V 0) A = supply connections reverse polarity protected B = outputs short-circuit protected C = interference suppression ) Do not distort cable below 0 C Teach-In function Programming via Teach-In button. Simple programming: Position object in the beam and push the button: finished; LED confirms the Teach-In procedure. Teach-In values can be stored. Two operating modes: Default setting: short Teach-In time (< 8 s); for standard applications; approx. double reserve via switching threshold; LED lights continuously. Precise setting: long Teach-In time (> 8 s); for precise applications; small switching hysteresis; LED blinks. Scanning distance 0/00 0 0 80 0 0 0 0 0(mm) 00 00 00 00 00 Operating distance Limiting scanning distance 000 00 90% WT 9- energetic Ordering information WT 9-P 08 97 WT 9-P 08 99 WT 9-N 08 98 WT 9-N 08 00 WT 9-P 09 07 WT 9-P6 09 7 Scanning range on black, 6 % reflectance Scanning range on gray, 8 % reflectance Scanning range on white, 90 % reflectance Function reserve 0 8% 6% (mm) 00 00 Limiting scanning distance Operating distance 00 00 00
WT 9- Photoelectric Proximity Switch, V-type, Teach-In Scanning distance 0... 0 mm Photoelectric proximity switch Dimension illustration Red-light emitter LED as alignment aid Scanning distance adjustable Switching frequency 800/s Outputs short-circuit protected Teach-In 6..7. 0 0 Setting options WT 9-P WT 9-P WT 9-N WT 9-N WT 9-P WT 9-P6 6 Axis of the receiver optics Axis of the receiver optics ounting hole Ø. mm LED signal strength indicator Plug or 8, pin, m connection cable or 0 mm cable with plug, pin Scanning distance adjuster, teachable 6 Connection type WT 9-P WT 9-N WT 9-P WT 9-P WT 9-N WT 9-P6 Accessories ounting bracket Cable receptacles Adapter plate pin, pin, 8 x 0, mm pin, with 0 mm cable 6
WT 9- Technical data WT 9- P P N N P P6 Scanning distance adjustable ) 0... 0 mm Supply voltage V ) S DC 0... 0 V Ripple ) V PP Current consumption ) 0 ma Light source LED, visible red light ) Light spot diameter Switching outputs and Signal voltage HIGH Signal voltage LOW 6) Output current I A max. mm at a distance of 0 mm PNP NPN.9 V Approx. 0 V.9 V 00 ma Response time 7) 6 µs Switching frequency max. 8) 800/s Connection technology Connection cable, m Cable, 0 mm, with plug, pin Plug, pin Plug 8, pin VDE protection class 9) VDE protection class 8 9) III Protection type IP 67 Protection circuits 0) A, B, C Ambient temperature ) Operation 0... +60 C Storage 0... +7 C Weight with connection cable m/0 mm Approx. 80 g with equipment plug / 8, pin Approx. 0 g ) Object with 90% reflectance (referred to standard white DIN 0) ) Limit values ) ust be within tolerances ) Without load ) Average service life at room temperature 00,000 h 6) At T U = + C and 00 ma output current 7) With resistive load 8) With light/dark ratio : 9) Withstand voltage 0 V 0) A = supply connections reverse polarity protected B = outputs short-circuit protected C = interference suppression ) Do not distort cable below 0 C Teach-In function Programming via Teach-In button. Simple programming: Position object in the beam and push the button: finished; LED confirms the Teach-In procedure. Teach-In values can be stored. Two operating modes: Default setting: short Teach-In time (< 8 s); for standard applications; approx. double reserve via switching threshold; LED lights continuously. Precise setting: long Teach-In time (> 8 s); for precise applications; small switching hysteresis; LED blinks. Scanning distance 0 0 0 0 0(mm) 0 0 0 Scanning distance 00 0 8% WT 9-90% Ordering information WT 9-P 08 0 WT 9-P 08 0 WT 9-N 08 0 WT 9-N 08 0 WT 9-P 09 7 WT 9-P6 09 7 Scanning range on black, 6 % reflectance Scanning range on gray, 8 % reflectance Scanning range on white, 90 % reflectance Function reserve Operating distance (mm) 6% 8 6 0 8 7
WL 9- Photoelectric Reflex Switch, Standard Scanning range 0... m Photoelectric reflex switch Dimension illustration Red-light emitter LED as alignment aid Switching frequency 800/s Outputs short-circuit protected. 0 9. 0 Without setting options WL 9-P0 WT 9-P0 WL 9-P0 WT 9-P60 WL 9-N0 WL 9-N0 iddle of optic axis ounting hole Ø. mm LED signal strength indicator Plug or 8, pin, m connection cable or 0 mm cable with plug, pin Connection type WT 9-P0 WT 9-N0 WT 9-P0 WT 9-P0 WT 9-N0 WT 9-P60 Accessories Reflectors ounting bracket Cable receptacles Adapter plate pin, pin, 8 x 0, mm pin, with 0 mm cable 8
WL 9- Technical data WL 9- P0 P0 N0 N0 P0 P60 Scanning range typ. max./on reflector m/pl 80 A Supply voltage V ) S DC 0... 0 V Ripple ) V PP Current consumption ) 0 ma Light source LED, visible red light ) Angle of dispersion. Light spot diameter Switching outputs and Signal voltage HIGH Signal voltage LOW ) Output current I A max. 0 x 0 mm at a distance of m PNP NPN.9 V Approx. 0 V.9 V 00 ma Response time 6) 6 µs ax. switching frequency 7) 800/s Connection technology Connection cable, m Cable, 0 mm, with plug, pin Plug, pin Plug 8, pin VDE protection class 8) VDE protection class 8 8) III Protection type IP 67 Protection circuits 9) A, B, C Ambient temperature 0) Operation 0... +60 C Storage 0... +7 C Weight with connection cable m/0 mm Approx. 80 g with equipment plug / 8, pin Approx. 0 g ) Limit values ) ust be within tolerances ) Without load ) Average service life at room temperature 00,000 h ) At T U = + C and 00 ma output current 6) With resistive load 7) With light/dark ratio : 8) Withstand voltage 0 V 9) A = supply connections reverse polarity protected B = outputs short-circuit protected C = interference suppression 0) Do not distort cable below 0 C Scanning range 0.0.0 0.0.0 0 0.6/.0 0(m) Operating range Scanning range typ. max. 00 WL 9- Ordering information WL 9-P0 08 8 WL 9-P0 08 8 WL 9-N0 08 8 WL 9-N0 08 8 WL 9-P0 09 0 WL 9-P60 09 68 Reflector type PL 80 A PL 0 A Reflective tape Diamond Grade* * 00 x 00 mm Operating range 0... m 0... m 0... 0.6 m Function reserve 0 Operating range Limiting scanning range (m) 9
WL 9- Photoelectric Reflex Switch, Standard, Teach-In Scanning range 0... m Photoelectric reflex switch Dimension illustration Red-light emitter LED as alignment aid Switching frequency 800/s Outputs short-circuit protected Teach-In. 0 9. 0 Setting options WL 9-P WL 9-P WL 9-N WL 9-N WT 9-P WT 9-P6 iddle of optic axis ounting hole Ø. mm LED signal strength indicator Plug or 8, pin, m connection cable or 0 mm cable with plug, pin Sensitivity control, teachable Connection type WT 9-P WT 9-N WT 9-P WT 9-P WT 9-N WT 9-P6 Accessories Reflectors ounting bracket Cable receptacles Adapter plate pin, pin, 8 x 0, mm pin, with 0 mm cable 0
WL 9- Technical data WL 9- P P N N P P6 Scanning range typ. max./on reflector m/pl 80 A Supply voltage V ) S DC 0... 0 V Ripple ) V PP Current consumption ) 0 ma Light source LED, visible red light ) Angle of dispersion. Light spot diameter Switching outputs and Signal voltage HIGH Signal voltage LOW ) Output current I A max. 0 x 0 mm at a distance of m PNP NPN.9 V Approx. 0 V.9 V 00 ma Response time 6) 6 µs ax. switching frequency 7) 800/s Connection technology Connection cable, m Cable, 0 mm, with plug, pin Plug, pin Plug 8, pin VDE protection class 8) VDE protection class 8 8) III Protection type IP 67 Protection circuits 9) A, B, C Ambient temperature 0) Operation 0... +60 C Storage 0... +7 C Weight with connection cable m/0 mm Approx. 80 g with equipment plug / 8, pin Approx. 0 g ) Limit values ) ust be within tolerances ) Without load ) Average service life at room temperature 00,000 h ) At T U = + C and 00 ma output current 6) With resistive load 7) With light/dark ratio : 8) Withstand voltage 0 V 9) A = supply connections reverse polarity protected B = outputs short-circuit protected C = interference suppreasion 0) Do not distort cable below 0 C Teach-In function Programming via Teach-In button. Simple programming: Position reflector in the beam and push the button: finished; LED confirms the Teach-In procedure. Teach-In values can be stored. Scanning range 0.0.0 0.0.0 0 0.6/.0 0(m) Operating range Scanning range typ. max. Two operating modes: Default setting: short Teach-In time (< 8 s); for standard applications; approx. double reserve via switching threshold; LED lights continuously. Precise setting: long Teach-In time (> 8 s); for precise applications; small switching hysteresis; LED blinks. 00 WL 9- Ordering information WL 9-P 08 8 WL 9-P 08 87 WL 9-N 08 86 WL 9-N 08 88 WL 9-P 09 0 WL 9-P6 09 69 Reflector type PL 80 A PL 0 A Reflective tape Diamond Grade* * 00 x 00 mm Operating range 0... m 0... m 0... 0.6 m Function reserve 0 Operating range Limiting scanning range (m)
WL 9- Photoelectric Reflex Switch, Focus mm, Teach-In Scanning range 0... 0. m Photoelectric reflex switch Dimension illustration LED light source, visible red light Sensitivity adjustment using the Teach-In method Switching frequency 800/s Outputs short-circuit protected. 0 9. 0 Setting options WL 9-P WL 9-P WL 9-N WL 9-N WT 9-P WT 9-P6 iddle of optic axis ounting hole Ø. mm LED signal strength indicator Plug or 8, pin, m connection cable or 0 mm cable with plug, pin Sensitivity control, teachable Connection type WT 9-P WT 9-N WT 9-P WT 9-P WT 9-N WT 9-P6 Accessories Reflectors ounting bracket Cable receptacles Adapter plate pin, pin, 8 x 0, mm pin, with 0 mm cable
WL 9- Technical data WL 9- P P N N P P6 Scanning range typ. max./on reflector 0. m/pl 80 A Supply voltage V ) S DC 0... 0 V Ripple ) V PP Current consumption ) 0 ma Light source LED, visible red light ) Light spot diameter Switching outputs and Signal voltage HIGH Signal voltage LOW ) Output current I A max.. x. mm at a distance of mm PNP NPN.9 V Approx. 0 V.9 V 00 ma Response time 6) 6 µs ax. switching frequency 7) 800/s Connection technology Connection cable, m Cable, 0 mm, with plug, pin Plug, pin Plug 8, pin VDE protection class 8) VDE protection class 8 8) III Protection type IP 67 Protection circuits 9) A, B, C Ambient temperature 0) Operation 0... +60 C Storage 0... +7 C Weight with connection cable m/0 mm Approx. 80 g with equipment plug / 8, pin Approx. 0 g ) Limit values ) ust be within tolerances ) Without load ) Average service life at room temperature 00,000 h ) At T U = + C and 00 ma output current 6) With resistive load 7) With light/dark ratio : 8) Withstand voltage 0 V 9) A = supply connections reverse polarity protected B = outputs short-circuit protected C = interference suppression 0) Do not distort cable below 0 C Teach-In function Programming via Teach-In button. Simple programming: Position reflector in the beam and push the button: finished; LED confirms the Teach-In procedure. Teach-In values can be stored. Scanning range 0 0. 0. 0 0. 0. 0 0,. 0. 0(m) 0. 0. 0. 0. 0. Operating range Limiting scanning range 00 Two operating modes: Default setting: short Teach-In time (< 8 s); for standard applications; approx. double reserve via switching threshold; LED lights continuously. Precise setting: long Teach-In time (> 8 s); for precise applications; small switching hysteresis; LED blinks. WL 9- Ordering information WL 9-P 08 89 WL 9-P 08 9 WL 9-N 08 90 WL 9-N 08 9 WL 9-P 09 70 WL 9-P6 09 7 0 Reflector type PL 80 A PL 0 A Reflective tape Diamond Grade* * 00 x 00 mm Operating range 0... 0. m 0... 0. m 0... 0. m Function reserve Operating range Limiting scanning range (m) 0. 0. 0. 0. 0. 0.6
Accessoires Dimension illustrations and ordering information Dimension illustrations of reflectors Reflector 0 x 0 mm PL 0 A 0 79 Reflector 0 x 0 mm PL 0 A 00.. 8 7 0 8 60 ø. ø8 ø8 ø.6 8 7. 9.8 7. Reflector 0 x 60 mm PL 0 A 0 70 Reflector hexagonal, SW 8 mm PL 0 A 000 6.6 9.8 68 78 ø. ø8. Also available as heatable model: Continuous heating: PL 0HK, 00 Regulated heating: PL 0HS, 009 87 8 7.8 0. 9 8 Reflector 80 x 80 mm PL 80 A 00 86 Reflector ø 8 mm, center hole mounting C 0 0 9 8. 68 7 8 ø.8 8 9 8. 8. Reflective tape REF-DG-K REF-DG 09 6 0 fabricated sheet 79 x 9 mm
Accessoires Dimension illustrations and ordering information Dimension illustrations of cable receptacles Contact assignments according to EN 00 DC coding Pin assignments Pin = brown Pin = white Pin = e Pin = black Cable receptacles, pin, straight Pins DOS-0-G 6 007 0 Cable lengths Cable receptacles, pin, angled Pins DOS-0-W 6 007 0 Cable lengths 6 6 x ø8. 8. ø0. ø8.8. R min 7 ) Rmin 7 ) 6...8 0. x ø8 Can be self-made for cables Ø. to 6. mm Can be self-made for cables Ø. to 6. mm Cable receptacles, pin, straight Pins DOS-0-G0 DOS-0-G0 DOS-0-G0 6 009 8 6 009 866 6 00 Cable lengths m m 0 m Cable receptacles, pin, angled Pins DOS-0-W0 DOS-0-W0 DOS-0-W0 6 009 8 6 009 867 6 00 Cable lengths m m 0 m ø8.8 ø0. 7. x. x ) inimum bending radius with dynamic use ) inimum bending radius with dynamic use
Accessoires Dimension illustrations and ordering information circular screwing system, 8 plug, pin, enclosure rating IP 67 8 cable receptacle, pin, straight DOS-080-G 6 009 97 8 cable receptacles, pin, angled DOS-080-W 6 009 97 ø.6 8x 8. Cable diameter max..0 mm. 8.0 Cable diameter max..0 mm 8x ø.6 8 cable receptacle, pin, straight Cable diameter mm, x 0. mm, PVC coating Cable length DOL-080-G0 6 009 870 m DOL-080-G0 6 009 87 m DOL-080-G0 6 00 7 0 m 8 cable receptacles, pin, angled Cable diameter mm, x 0. mm, PVC coating Cable length DOL-080-W0 6 009 87 m DOL-080-W0 6 009 87 m DOL-080-W0 6 00 7 0 m R min ) / / / / ø 0 8x 0. / / / 6 6 / R min ) 6. 8x ø 0 ) inimum bending radius with dynamic use R min = 0x cable diameter 6
Accessoires Dimension illustrations and ordering information Dimension illustration adapter plate Adapter plate BEF-AP-W9 0 6.. 0 ø. 8. Dimension illustration mounting bracket ounting bracket BEF-WN-W9-0 6. 7.8 6..8 6 7 6 8 7
8 008 988.0700 HJS S Printed in Germany We reserve the right to make changes Contact: Australia Phone +6 9 97 00 0 08 8 0 toll free Fax +6 9 97 87 Austria Phone + 66 88-0 Fax + 66 88- Belgium/Luxembourg Phone + 66 66 Fax + 6 07 Brazil Phone + 6 6 8 Fax + China/Hong Kong Phone +8 7 6 69 66 Fax +8 7 6 6 Czech Republic Phone + 0 7 8 0 6 Fax + 0 7 8 0 9 Denmark Phone + 8 6 00 Fax + 8 6 0 Finland Phone + 8 9-7 8 8 00 Fax + 8 9-7 88 0 France Phone + -6 6 00 Fax + -6 6 77 Germany Phone +9 76 8 0-0 Fax +9 76 8 0-6 09 Great Britain Phone + 7 7-8 Fax + 7 7-8 67 67 Italy Phone +90-9 0 6 Fax +90-9 0 67 Japan Phone +8 8- Fax +8 8-0 86 Netherlands Phone + 0 9 Fax + 0 9 9 9 Norway Phone +7 67 6 7 00 Fax +7 67 6 66 0 Poland Phone +8 6-8 Fax +8 6-8 Singapore Phone +6 7 7 Fax +6 8 77 7 Spain Phone + 9 80 00 Fax + 9 7 69 Sweden Phone +6 8-6 80 6 0 Fax +6 8-7 0 8 7 Switzerland Phone + 6 9 9 9 Fax + 6 9 9 Taiwan Phone +88 6 6 6 9 Fax +88 6 68 7 97 USA Phone + 9 9-67 80 Fax + 9 9-9 87 Representatives and agencies in all major industrial nations. SICK AG Industrial Sensors Sebastian-Kneipp-Straße D-798 Waldkirch Phone +9/76 8/ 0-0 Fax +9/76 8/ 0-6 09 www.sick.de