Saker Plus Series Section 1: Screen Design. 1.1 What is it? The Saker Plus Series is a Large Venue electric/motorized projection screen. Its list of complimentary features include Infrared and Radio Frequency remote controls, a wireless 12 volt trigger and a detachable keypad switch for manual Up/Stop/Down control. 1.2 How does it work? The MaxWhite front projection material is GREENGUARD Gold Certified. It has a wide viewing angle and a 1.1 gain reflectivity. The Saker Plus is ideal for auditoriums, gymnasiums, or any other large venue indoor environments. Section 2: Product Features. 2.1 Characteristics Screen Material MaxWhite 1.1 Gain front projection surface Wide viewing angle, uniformly diffuses light in all directions Active 3D, 4K Ultra HD, and HDR Ready Not compatible with Ultra/Short-throw Projectors Standard black masking borders and black screen backing Available in the following diagonal sizes: 200", 235" and 265" in 4:3 format 200", 235" and 265" in 16:9 format Design and Installation Streamlined arcuate profile aluminum heavy-duty white case Ring bolts included on case for suspended ceiling installation Plug & Play ready, no hardwire installation required Control System Internal Radio Frequency/Infrared receivers with IR, RF remotes included Infrared IR "eye" extension sensor - ideal for concealed installation but still require infrared control Detachable 3-way wall switch keypad for UP/STOP/DOWN manual operation Wireless 5-12 volt trigger included for synchronized screen operation with the projector's power cycle RJ45 port allows 3rd party control system integration 1
Quality and Reliability Tubular motor allows swift operation with a superior weight tolerance and operational lifespan GREENGUARD and GREENGUARD Gold (UL 2818) Certified for indoor air quality emissions 5-year manufacturer's warranty 2.2 Certifications Model Number 2.3 Model Numbers Nominal Diagonal Aspect Ratio Viewing Height (in) Viewing Width (in) Screen Material Gain Case Color N.W. (lbs) G.W. (lbs) Packaging Dimensions (LxWxH) SK200XVW2 200" 4:3 120.0 160.0 MaxWhite 1.1 White 116.4 149.9 182.4"x13.4"x11.4" SK235XVW2 235" 4:3 141.0 188.0 MaxWhite 1.1 White 148.3 186.4 211.4"x13.2"x11.2" SK265XVW2 265" 4:3 159.0 212.0 MaxWhite 1.1 White 252.4 271.9 232.7"x12.2"x10.0" SK200XHW2 200" 16:9 98.1 174.3 MaxWhite 1.1 White 120.8 156.0 195.9"x13.0"x11.4" SK235XHW2 235" 16:9 115.2 204.8 MaxWhite 1.1 White 156.5 196.2 226.2"x13.0"x11.0" SK265XHW2 265" 16:9 129.9 231.0 MaxWhite 1.1 White 264.0 289.4 251.2"x12.2"x10.2" Section 3: Screen Material Specifications. 3.1 Characteristics MaxWhite screen material is the most versatile screen surface for front projection presentations. This material provides the widest possible viewer angles with perfect diffusion uniformity while giving precise definition, image color reproduction and black & white contrast. Screen surface has black-backing to avoid light penetration and can be cleaned safely with mild soap and water. Woven screen material is a multi-layer, cross-array coated with a matte white reflective compound. Features& Benefits Multi-layer weave and textured surface coating 2
Gain: 1.1 View Angle: 180 (90 ± LR) Not compatible with Ultra/Short-throw Projectors Mildew Resistant Black backing Active 3D, 4K Ultra HD, and HDR ready Surface can be easily cleaned with mild soap and water GREENGUARD and GREENGUARD Gold Certified UL 2818 Specifications Thickness 0.41 mm (0.016") Weight 530 g/m² Maximum Height 3.2 M (10 ft) On-axis Gain 1.1 Half-Gain Angle Does not reach half gain 3.2 Gain and Viewing Angle 3
Section 4: Execution. 4.1 Important Safety & Warning Precautions Caution: The screen s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with EliteProAV. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty. For more information, please contact our Technical Support Department at (877) 511-1211 Ext. 604. Please retain this user s guide for future reference. To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the manufacturer. Handle the unit carefully during transportation to avoid any damages. To ensure safe and reliable operation, direct connection to a properly grounded power source is advised. The power outlet supplying power to the unit should be close to the unit and easily accessible. Do not install the unit on uneven or inclined surfaces. Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle. Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit. There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No one except authorized technicians can open and make repairs to this unit. Make sure the power source this unit is connected to has a continuous power flow. If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid overheat. Do not handle the power plug when your hands are wet or your feet are in contact with water. Do not use this unit under the following circumstances. Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning. Avoid direct Sunshine, rain shower and moisture. Keep away from fire sources and high temperature to prevent this device from overheating. Cut off the power supply first before transportation or maintenance. Fully disconnect from the power supply when the unit is not in use for a long period of time, as should be done with any other electric household appliance. To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious damage or if there are any evident broken parts. 4.2 Warning The Screen s Top Black Drop is already set to its maximum drop distance. There is NO extra top black drop in the roller. Please be aware of this as it will void the limitation of your warranty. Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please contact EliteProAV Customer Service for any questions. 4
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur on a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna of the device which may be causing the interference. Increase the separation between the screen and the device s receiver. Connect the equipment into a different power outlet other than the device. 4.3 Pre-Installation 1. Carefully unpack the screen. 2. Always handle the screen in a leveled position on a clean surface. 3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such as dust, sawdust, and/or liquids. NOTE Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure that the fasteners used are of adequate strength and suitable for the installation location. 4.4 Hardware Parts List Please make sure all parts listed below are included before proceeding with the installation. A.M10*Suspended Hook x 4 pcs B. 20cm*Bubble leveler x1pc 4.5 Installation Instructions Recessed Installation 1. Select the installation location for your screen. Measure the distances between each eye bolt (Shown as measurements L and A in Fig.1). Mark the installation area on the ceiling based on the measurements 5
taken. Using the marks as a guideline, drill a hole in the ceiling for each suspension bolt. The distance between the installation hole (M) and the wall should be no longer than the measurement A. Insert one eye bolt of the M10 Suspended hooks into the predrilled holes. A Hole Ceiling L A L M Wall 2. Connect the center component of the M10 Suspended hooks to the eye bolts installed above the ceiling. Once properly secure, connect the third component of the M10 Suspended hooks. Attach the suspended hooks(4xm10) individually to each of the 4 eye bolts located on the top of the screen (A/B/C/D) D. A B The Screen (Fig.2) C. 3. After the installation is complete, if the screen is not leveled, you can adjust the height of the suspended hooks to level the screen. Below are the adjustment methods for the suspended hooks.the maximum and minimum adjustable lengths are shown in Fig 3 1 3 Clockwise rotation Counterclockwise rotation 2 Suspended hook 4.6 Controls and Accessories 1 2 3 4 (Fig.3) A. IR Remote B. RF Remote C. Wall switch control box D. 5-12 volt trigger cable 6
E. IR extended eye receiver F. Wireless 5-12v trigger cable G. AAA batteries 4.7 Screen Operation Electric Current: Depending upon region, your Elite Screen will operate on 110v, or 220v voltage. 1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet. 2. Once the screen s has power, you ll be able to control it using any of the 6 methods described below. 6 ways to control your Saker Plus 1. IR remote control (Item A, Fig 1) and IR Eye Receiver (Item E, Fig 2): The Infrared functions by direct line of sight contact with a beam range of 30 feet. The IR Eye receiver plugs directly into the screen s RJ-45 input to present a low profile line-of-sight control option for your IR remote control even in a recessed ceiling installation. Once connected, simply aim the IR remote at the IR Eye receiver to control the screen. 2. RF Remote Control (Item B): The radio waves eliminate the need for a direct line of sight with a range of 100 feet. UP STOP DOWN IR/RF remote Fig.1 3. 3-Way Wall Switch (Item C, Fig 3): The 3-way wall switch is a wall mount control box with an up/stop/down button and plugs directly into the screen s RJ-45 input. Fig.3 Fig.2 IR eye receiver 3 Way Wall Switch (does not have IR sensor) 4. 5-12 volt trigger (Item D, Fig 4): The built-in 5-12V trigger input allows your screen to synchronize its drop & rise with the projector s power cycle. The screen deploys when the projector powers on and will retract when the projector powers off. The 5-12 volt RJ45 cable connects to your projector s trigger output via a separate cable that may or may not be provided by the manufacturer of the projector. The trigger feature will not work without an output cable from the projector, but it can be tested by connecting the Red (+) and Green (-) cable to a 9-volt battery. 7
3 prong power cord Fig.4 RJ45 Input 5-12 volt trigger cable 5. Wireless 5-12 volt trigger (Item F, Fig 5): The RF remote control serves as a dual purpose, independently as a handheld remote control, or in conjunction with the Wireless 5-12 volt trigger cable. The radio frequency technology can be programmed to send a wireless signal to synchronize its drop & rise with the projector s power cycle. Here s how to set up your Wireless 5-12 volt trigger Synchronization Instructions Step1: Connect the wireless 5-12 volt trigger cable to the RF remote (3.5mm) Step 2: Connect the 12 v adaptor end of the wireless 5-12 volt trigger cable to your projector Step 3: Make sure to unplug your screen from the power outlet Step 4: Hold the UP button on your RF remote Step 5: While holding the UP button, plug the screen back to the power outlet Step 6: Wait 5 seconds and then release the UP button Step 7: Your 5-12V wireless trigger should now be activated with your screen and ready to be used and able to control your screen with your projector s power cycle Repeat the steps again if not successful. (Please be aware, the projector on/off cycle may take longer to fully activate. It usually takes around 20-30 seconds for full off and on cycle each time) The back of the projector Fig 5 DC 5-12V out Wireless 5-12V trigger cable UP Stop Down 8
Section 5: Product Specifications. 5.1 Dimensions Model Number (A) (A1) (A2) (A3) (A4) (A5) (B) (B1) (B2) (B3) (B4) (B5) (C) (C1) (C2) (C3) (C4) Unit: Inches SK200XVW2 176.0 169.2 163.9 160.0 2.0 167.9 135.0 6.7 6.0 120.0 2.4 128.3 6.7 SK235XVW2 204.0 197.2 191.9 188.0 2.0 195.9 158.0 6.7 8.0 141.0 2.4 151.3 6.7 SK265XVW2 228.0 221.2 215.9 212.0 2.0 219.9 178.1 6.7 10.0 159.0 2.4 171.4 6.7 SK200XHW2 190.3 183.5 178.3 174.3 2.0 182.2 113.1 6.7 6.0 98.1 2.4 106.4 6.7 SK235XHW2 220.8 214.0 208.8 204.8 2.0 212.7 132.3 6.7 8.0 115.2 2.4 125.6 6.7 SK265XHW2 247.0 240.2 234.9 231.0 2.0 238.9 149.0 6.7 10.0 129.9 2.4 142.3 6.7 Unit: mm SK200XVW2 4471 4298 4164 4064 50 4264 3430 170 152 3048 60 3260 170 SK235XVW2 5182 5009 4875 4775 50 4975 4014 170 203 3581 60 3844 170 SK265XVW2 5791 5618 5484 5385 50 5585 4524 170 254 4039 60 4354 170 SK200XHW2 4834 4661 4528 4428 50 4628 2873 170 152 2491 60 2703 170 SK235XHW2 5609 5436 5303 5203 50 5403 3360 170 203 2927 60 3190 170 SK265XHW2 6274 6101 5966 5867 50 6068 3785 170 254 3299 60 3614 170 5.2 Drawings 8.7-11.2 8.7-11.2 8.7-11.2 8.7-11.2 8.7-11.2 8.7-11.2 221-284 221-284 221-284 221-284 221-284 221-284 1.9 1.0 2.6 1.7 1.0 2.6 1.1 1.0 2.6 1.9 1.0 2.6 1.7 1.0 2.6 1.1 1.0 2.6 48 25 67 42 25 67 28 25 67 48 25 67 42 25 67 28 25 67 9
5.3 Pictures Saker Plus Series Sizes End Cap and Weight Bar Detail 10
Installation Eye Bolt Detail Suspended Hook Detail 11
Remote Kit Section 6: Company Description. 6.1 About EliteProAV EliteProAV is a the manufacturer of projector screens for the commercial AV sales channel. It is a division of Elite Screens Inc., an ISO9001:2015 certified manufacturer that is presently the leading international brand of CE Retail projector screens with offices located worldwide. EliteProAV provides an array of dedicated commercial grade projector screens for professional integrators. This includes certified products that are also compatible with building codes as well as programs, warranties and trained professionals to assist installers every step of the way. Product is available through a series of regional warehouses located in Southern California, Texas, Georgia, and Maryland. EliteProAV is located at 12282 Knott St. Garden Grove, CA 92841. For more information, please call 877-511-1211 or visit. ### 12