Digital Revolution. Operation Manual Version 1.0 (20/04/2014) Steven Heath, Matthew Fudge, Daniel Byers WAVE ALCHEMY

Digital Revolution Operation Manual Version 1.0 (20/04/2014) Steven Heath, Matthew Fudge, Daniel Byers WAVE ALCHEMY

Contents Introduction... 2 Digital Revolution Concept... 2 Install Instructions... 3 System Requirements... 3 Already a Transistor Revolution MKII User?... 4 Digital Revolution Basics... 4 Loading and Navigating the Instrument... 4 Rhythm Composer Page... 5 Track Mixer Page... 15 Master / Settings Page... 18 Digital Revolution Percussion... 21 Digital Revolution Drum Modules... 23 Drum Module Processing Chain... 24 Credits... 29 Demo Creation... 29 Sampling Specifications... 30

Introduction We would like to take this opportunity to thank you for purchasing Digital Revolution, our virtual drum machine instrument inspired by the classic digital drum machines of the 1980 s Powered by Revolution Engine technology (first developed for Transistor Revolution MKII), Digital Revolution puts a wide range of vintage drum machine sounds from the 1980 s at your fingertips. We sincerely hope that you have lots of fun exploring Digital Revolution s capabilities, and enjoy creating new sounds with it as much as we have enjoyed developing the instrument itself. Digital Revolution Concept Following on from the research, development and subsequent release of our successful Transistor Revolution MKII instrument we now find ourselves at the beginning of a new chapter involving a brand new instrument powered by what we call the Revolution Engine. Simply put the Revolution Engine (which was first developed during the creation of Transistor Revolution) is the driving force behind our Revolution instruments, the result of many years of passionate multi-sampling research, programming and development. This time we wanted to include many more drum machines and integrate them into one unified instrument to give you instant access to a huge variety of classic drum machine sounds within a software plugin. As the name Digital Revolution suggests, this instrument mainly focuses on capturing the iconic sound of the classic digital drum machines of the past (along with three bonus analog drum machines!). The digital nature of the majority of these sound sources meant that we could focus less on in depth multisampling (which for digital sound sources would be a waste of resources) and more on the creation of interesting real-time re-sampling modes, capable of a creating a wide range of tonal variations. This gave birth to Digital Revolutions unique re-sample modes; hi-fi and lo-fi, with the latter selectable between pitch mode and grit mode. We are particularly excited about grit mode which resamples the selected drum sound through an iconic grey sampler in real-time, allowing you to add the dirt and grit you would get from a retro sampler instantly!. We are confident (and hopeful) that the combination of these new features along with our tried and tested Revolution Engine 16-step sequencer, dedicated 10-track mixer, dual delay and reverb units, master processing section and modular preset browser will result in one thing for you Beats with Teeth. Steve Heath, Dan Byers and Matthew Fudge The Wave Alchemy Team

Install Instructions Digital Revolution is available in Standalone, VST, AU and RTAS instrument formats for Windows and Mac OS X via the Free Kontakt Player from Native Instruments. The full version of Kontakt is NOT required. 1. After purchasing Digital Revolution, fully download the supplied.zip file to a suitable location on your hard drive. 2. Double click the.zip file to unpack the library. You should now have a folder named Digital Revolution. Put this somewhere safe on your hard drive. If you do not own Kontakt, you will need to install the free Native Instruments Kontakt player which you can download here - Kontakt Player Download Link TO ADD THE LIBRARY AND AUTHORIZE IN KONTAKT 1. In Kontakt or Kontakt Free Player, open the Browser on the left (the folder Icon at the top). 2. In the Libraries tab at the top of the Browser go to "Add Library" 3. Click and use the dialogue window to navigate to, and point Kontakt to the location of the Digital Revolution folder. This will add it to the Kontakt Library list AND to the NI Service Center. 4. If Kontakt asks you to activate the library, the NI Service Center program will launch and you will need your serial number to authorize the software. If Kontakt doesn't ask you to authorize, you can force it to by clicking the little "activate" button in the upper right corner of our Digital Revolution Library logo, in the Browser/Libraries list. It will then prompt you to launch the Service Center. Your serial number will be sent to you via email within 24 hours of purchasing. While you are waiting for your serial number, you can run the instrument in demo mode until it arrives. Note: After authorization, you should restart Kontakt. System Requirements Available in Standalone, VST, AU and RTAS instrument formats for Windows and Mac OS X via the free Kontakt Player from Native Instruments. Full version of Kontakt is NOT required. 1GB free hard disk space. We recommend a minimum of 4GB of Ram to smoothly run Digital Revolution. Windows Windows 7 or Windows 8 (latest Service Pack, 32/64-bit), Intel Core 2 Duo or AMD Athlon 64 X2, 2 GB RAM (4 GB recommended) Mac Mac OS X 10.7 or 10.8 (latest update), Intel Core 2 Duo, 2 GB RAM (4 GB recommended)

Already a Transistor Revolution MKII User? If you are an experienced user of our Transistor Revolution MKII instrument you will already be familiar with the Revolution Engine and therefore will already know how to operate Digital Revolution. If you are confident with the operation of TRMKII then feel free to skip through the manual. We recommend you read the following sections of the manual to quickly get up to speed with Digital Revolution: Machine Selector / Sound editor section Digital Revolution Percussion Instrument Digital Revolution Drum Modules Sampling Specifications Digital Revolution Basics The Digital Revolution library comes with a range of different instrument.nki files which suit different applications. In the Instruments folder you will find; Digital Revolution Drum Kit.nki Digital Revolution Percussion.nki Drum Modules (folder) The Digital Revolution Drum kit.nki and Digital Revolution Percussion.nki integrate multiple drum machine sound types into a unified instrument that features a 16-track step sequencer, a track mixer with dedicated channels for each sound type and a master section comprising of a multi-track tape machine and master effects section. Note: The Digital Revolution Drum Kit.nki includes a limited range of percussion sounds e.g. rim, clave, clap, shaker and tambourine for each drum machine while the Digital Revolution Percussion.nki includes all of the above as well as the more exotic percussion sounds such as timbales, guiro, congas, bongos, whistles and cabasa. You will also find an additional folder called Drum Modules which contains all individual sound types (particularly useful if you only want to load a kick drum or snare into your DAW). Loading and Navigating the Instrument After successful installation you will see Digital Revolution in the browser window under the libraries tab to the left of Kontakts main window. To load the Digital Revolution Drum Kit instrument select the instruments tab and double click Digital Revolution Drum Kit.nki or alternatively click + hold and drag the instrument onto the main Kontakt window to load.

Rhythm Composer Page Once the Digital Revolution Drum Kit is loaded the first page you will see is the rhythm composer page. This is the main instrument page that allows you to select, edit and sequence the raw source drum sounds that make up the Digital Revolution Drum Kit. The rhythm composer page can be broken down into 4 main sections: 1. The Track Sequencer 2. Machine Selector Matrix / Sound Editor 3. The Pattern Load and Sequencer Settings Section 4. The Sound Type Selector

1. The Track Sequencer At the very top of the instrument you can see a 16 step TR style sequencer which allows the user to input notes with a click of the mouse. A full orange bar triggers accented notes while a half orange bar triggers un-accented notes. The levels of which are controlled by the volume parameter in the sequencer settings section found on the rhythm composer page. To run the sequencer press C-1 on a connected midi keyboard controller or alternatively enter a midi note into a piano roll editor (or similar) using your sequencer of choice. When the sequencer is running you will see a red indicator light cycling from left to right through each step. We have highlighted steps 1, 5, 9 and 13 to help you identify the downbeats quickly and easily. What you see in the track sequencer changes dynamically depending on what sound type you have selected. For example if you have the BASS type selected you will see the BASS track sequencer. You can quickly select the drum sound type you want to work with by using the sound selector at the bottom of the instrument or by using live midi input mode which is toggled on/off with the select on note feature which can be found in the sequencer settings section. 2. Machine Selector Matrix / Sound Editor Just below the track sequencer you will see the machine selector matrix / sound editor for the currently selected drum sound type. Similar to the sequencer track view, the parameters that you see in the sound editor change depending on what drum sound you currently have selected. In the example above you can see that the 82 L bass drum sound is currently selected so the following 82 L bass drum editing parameters are shown; level, variation, character and resample along with gate settings, and MIDI learn for the chosen drum sound. Remember you can load separate drum module.nki files into your DAW if you only need a specific drum sound type or want to save on RAM (see Digital Revolution Drum Modules).

The following descriptions briefly explain the different editing parameters available for the 82 L bass drum. 82 L Bass Drum a Brief Explanation The 82 L bass drum re-creates the sound of a popular classic hardware digital kick drum from the 1980 s. The following parameters are used to edit the tone and shape of the drum sound. Level This control is provided for every sound source and controls volume. Rotating this clockwise will increase the volume. Machine Used to select the current drum machine for the selected sound type e.g. BASS (82 L is selected for this example) Variation Used to cycle through the recorded variations of the chosen individual drum machine sound (if no slider is available this means no variations were recorded for the chosen drum sound, often due to the design of the original hardware e.g. no tune exists on the original hardware so tune variation was not recorded). The variation slider controls tune, decay or sample select depending on what drum machine sound you have selected. Character Allows you to select between 3 playback modes; hi-fi, original, lo-fi and off. Resample Mode Allows you to choose the grit or pitch when the lo-fi character is selected. Resample Slider Allows you to adjust the tune or pitch of the lo-fi character.

Generic Controls All drum sounds available in Digital Revolution have generic gate and MIDI learn controls. Hold This sets the playback length of the drum sound. Ranging from 0-15,000ms. Decay This sets the decay length of the drum sound, which begins after the playback length has ended. This ranges from 0-25,000ms. MIDI Note Name Displays the current playback note for the sound source. MIDI Learn Switch When pressed, the next played note will become the playback note for the sound source. This allows for quick and easy setup when using Transistor Revolution with any MIDI hardware controller or drum pad. 3. The Pattern Load and Sequencer Settings Section Below the sound editor you will find the pattern load and sequencer settings section. The pattern load section to the left gives you access to 16 sequence pattern slots with full loading, saving and copying features for a quicker work flow.

3. Pattern Load Section Patterns can be selected with the mouse or by triggering midi keys D-1 through to F0. With Kontakts show keyboard function enabled you can easily see which midi keys on your keyboard will trigger the different patterns (the pattern trigger keys are light blue in colour). To see a full breakdown of midi trigger keys and their functions you can click the options menu under the speed control next to write mode (also see options page). Once you have triggered a pattern Kontakt waits until the start of the next bar before triggering to keep everything in time. This is especially useful in live situations and to keep musical ideas flowing with seamless transitions from one pattern to the next. Pattern Save You are free to save patterns anywhere on your machine although we recommend saving your patterns into the user folder which is located in the Digital Revolution root folder. Here is the file path: Digital Revolution/Presets/Sequence Patterns Note: Unfortunately due to the way that Kontakt works you will not see your saved patterns in the sequence preset browser until you close down and re-load Kontakt or similarly re-load the instance of Kontakt in your DAW. Using the pattern section you can choose to load previous / next pattern, save a pattern, load a pattern, copy a pattern and open the pattern sequence browser. Prev Selects and loads the external sequence file preceding the one currently selected in the browser. Next Selects and loads the external sequence file subsequent to the one currently selected in the browser. Save Saves the current pattern to a file that can be stored to the preset folder or another external location. Load Loads a Digital Revolution.nka file from an external location and loads the sequence into the current pattern. Copy When enabled the current sequence will be copied to the next selected pattern. Note that this function is not compatible with switching patterns via the mouse unless using the Kontakt keyboard to send pattern select key switches. This option can also be called by triggering the note A0 via external midi.

Browse Enables the browser view which allows fast loading and browsing of all patterns stored in the /Presets/Sequence Patterns location in the Digital Revolution library folder. Sequence Preset Browser Digital Revolution uses modular file browsers which give you access to different kinds of factory presets depending on which page you currently have selected (rhythm composer, track mixer or master / settings pages). On the rhythm composer page when browse is activated you will see a file browser window which gives you instant access to the factory pattern sequences as well as an empty user folder which you can save your own pattern sequences to. You can load different patterns to different pattern slots easily by selecting a pattern slot and then navigating the browser to locate and load (double click) on a pattern. This is a great way to build up ideas and experiment with switching patterns on the fly. You will also notice a Reset Pattern.nka which you can use to quickly erase all patterns so you can start building patterns from scratch. Sequencer Settings The sequencer settings section gives you global control over how many steps the sequencer uses, the volume of accented notes and the sequencer rate. Steps Determine the global length of all step sequencers. This function is useful for achieving time signatures other than ones divisible by 16. Split Determines the velocity breakpoint of which external MIDI will trigger accented or unaccented notes. Velocities equal to or above the number shown will trigger accented values, velocities below will trigger unaccented values. Vol Determines the global volume level of all un-accented triggers. When the value is set to 127 accented and un-accented triggers will have an identical volume level. As the number is decreased the dynamic range between un-accented and accented triggers will increase. Rate Determines the synchronised rate or speed at which the sequencer will move from one step to another. This function is only available when the sync found to the right of this control is illuminated. Sync Button Determines whether the rate or speed at which the sequencer will move from one step to another is synchronised to the BPM of an external host or the rate of the speed knob found below this button.

Swing / Shuffle Determines the swing/shuffle groove of the internal sequencer by adding negative or positive delay to sub-divisions of each beat. Moving the knob to the left adds negative delay to the sub-divisions, moving the knob to the right adds positive delay. When the knob is centred no swing/shuffle is added to the groove. Speed Determines the un-synchronised rate or speed at which the sequencer will move from one step to another. This function is only available when the sync button found to the right of the synchronised rate is illuminated. Select On Note If enabled, the user interface will automatically update to show the parameters of the last drum sound to be triggered by external MIDI. Mute Input If enabled, external MIDI will not trigger the playback of individual drum voices. When used in combination with SELECT ON NOTE you can update the interface to a specific drum voice without hearing its playback. This option can also be called by triggering the note G#0 via external MIDI. Write Mode If enabled, external MIDI will not trigger the playback of individual drum voices. When used in combination with SELECT ON NOTE you can update the interface to a specific drum voice without hearing its playback. This option can also be called by triggering the note G#0 via external MIDI. Options Menu - If selected, the Options Menu is revealed to display advanced settings related to the internal sampler engine and sequencer.

Sampler Options The sampler options section gives you control over the following range of functions for each drum voice: Sampler Tune Adjusts the digital tuning of a drum voice. This slider has a range of +/- 12 semitones with its default position set to halfway (original pitch). Bit Depth Adjusts the digital bit depth. When set fully to the right the sampler will playback at its full uncompromised bit depth. As the slider moves to the left the bit depth decreases. Sample Rate Adjusts the digital sample rate. When set fully to the right the sampler will playback at its full uncompromised sample rate. As the slider moves to the left the sample rate decreases. Output Filter Adjusts a low pass filter which is placed on the output of the Drum voice directly before being sent to the mixer. This is useful for eliminating or reducing high frequency noise which may be created by abusing bit depth and sample rate for the Drum voice. Polarity Inverts the polarity of the Drum voice. This can be useful for adjusting the phase relationship between different drum sounds when played simultaneously.

Sequencer Options The sequencer options section gives you a graphical display of the different key trigger commands and their respective key mappings as well as a range of global sequencer functions which can be triggered by MIDI keys or a mouse click. Key Mappings MIDI Key Trigger Command C-1 START/STOP the sequencer C#-1 Re-starts the sequencer immediately from step 1 D-1 though F0 Triggers patterns 1-16 F#-0 G0 G#-0 A0 A#-0 B0 CLEAR ON NOTE If enabled, the next Drum Voice which is selected via external MIDI will have its current sequence erased. After this function is carried out playback will revert back to normal behaviour. CLEAR FULL PTN When selected, the entire sequence of the current pattern will be erased. If you wish to avoid inadvertently triggering this option you can select CLEAR FULL PTN. SAFETY below. MUTE MIDI INPUT If enabled, external MIDI will not trigger the playback of individual drum voices. When used in combination with SELECT ON NOTE you can update the interface to a specific drum voice without hearing its playback. COPY PTN When enabled the current sequence will be copied to the next selected pattern. Note that this function is not compatible with switching patterns via the mouse unless using the Kontakt keyboard to send pattern select key switches. WRITE MODE - If enabled and the internal sequencer is running, any drum voice which is triggered via external MIDI will be written into the pattern at the current sequence step. The 'SPLIT' value will be used to determine un-accented and accented values. PLAY ON SELECT If enabled, triggering a pattern via external MIDI (D-1 - F0) will cause playback to begin with that specific pattern. The default behaviour is to leave this option enabled however in some situations it may be useful to temporarily disable.

Stop with Ext. Seq If enabled, playback of the internal sequencer will stop when the external sequencer hosting Digital Revolution is also stopped. Clear ptn. Safety If enabled, the 'CLEAR FULL PTN' option will be disabled. Triggering 'CLEAR FULL PTN' via the user interface or via external note G#0 will be ignored. Switch On Step #1 If enabled and pattern changes are triggered via external MIDI (D-1 - F0), the current sequence will not update until the subsequent 'Beat 1' of the external sequencer has arrived. This is useful for ensuring that patterns will change on the 'downbeat' when hosting Digital Revolution in an external host. Start On Beat #1 If enabled and Digital Revolution is being hosted in an external sequencer which is currently playing the internal sequencer will not start until the subsequent 'Beat 1' of the next bar has arrived. To ensure proper timing is always achieved with external hosts the recommendation would be to leave this option enabled. Exit Exits the options menu 4. The Sound Selector Buttons At the bottom of the rhythm composer page you can see a strip of buttons that are used to select the drum voice you want to work with. When you select a drum voice you will see that the sound editor and the sequence view will change to show you the current sequence and editing parameters for that drum voice. When SELECT ON NOTE is enabled the interface will update to show the parameters and sequence of the last drum voice played.

Track Mixer Page The track mixer page which is accessed by clicking the track mixer tab at the bottom of Kontakt main window contains individual mixer channels for each drum voice. 10 channels are provided with volume, mute, solo and pan controls along with a dedicated processing chain for each individual channel with an EQ, Compressor and a Transient Shaper. Additionally each channel has 2 effects sends (reverb or delay) which can be switched to buses A or B allowing for individual effects processing for each drum voice.

Reverb - Adjusts the amount of signal which is sent from the selected channel to the selectable 'Reverb A' or 'Reverb B' effect. Reverb A/B Select Appears when the amount of reverb is increased and selects whether the Reverb Send is directed to the 'Reverb A' or 'Reverb B' effect." Delay - Adjusts the amount of signal which is sent from the Bass Drum channel to the selectable 'Delay A' or 'Delay B' effect. Delay A/B Select - Appears when the amount of Delay is increased and selects whether the Bass Drum Delay send is directed to the 'Delay A' or 'Delay B' effect. Pan - Adjusts the pan of the channel. The channel pan also effects the panning of the signal which is sent from the channel to the Reverb and Delay sends. Mute - Mutes the output of the channel. Solo - Solo's the output of the channel. Note that the Solo is defeatable and will un-solo any previously solo'd channel. Fader Level - Adjusts the volume of the channel. The volume adjustment is post-inserts and pre-sends. Track Mixer Browser The Track mixer browser which is accessed by clicking the BROWSE button gives you access to a range of factory settings that you can instantly load into any of the mixer channels. Presets are provided for each type of drum sound although you are free to mix and match by loading any preset into any channel. As well as loading mixer settings from the factory you can also save your own mixer presets. You are free to save mixer presets to any location on your machine although we recommend saving them to the user folder in the following location so you can load them at a later date from the browser window within Digital Revolution. /Presets/Mixer Presets/User

Save Saves the current mixer setting to a file that can be stored to the Preset folder or another external location. Load Loads a Digital Revolution.nka file from an external location and loads the Preset into the currently selected Mixer Channel. Prev Selects and loads the external Mixer Preset preceding the one currently selected in the browser. Next Selects and loads the external Mixer Preset subsequent to the one currently selected in the browser. Reverb Effect Digital Revolution has dual reverb units which are loaded with custom built impulse responses. Two reverbs (A and B) are available and can be assigned to individual channels using the reverb level and reverb A/B select buttons. Delay Effect Dual delay units are also available which can be assigned to individual channels using the delay level and delay A/B select buttons. Delay A is synchronised to the sequencer speed or host tempo (when you are working in a DAW). Different delay times can be selected using the TIME knob. Delay B is free running with its own dedicated TIME knob to control the delay time manually.

Master / Settings Page The Master / Settings page which is accessed by clicking the Master / Settings tab at the bottom of Kontakts main window gives you access to a multi-track tape machine with individual channels for each drum voice, a mastering effects section with EQ, Dynamics, Filter and distortion sections and a Master Settings browser which allows the loading and saving of master settings presets. Multi-Track Tape Machine The Multi-track tape section (above) is shown by default. Enable Button This button enables the Multi-Track Tape Machine. Take note, the tape machine algorithm can increase CPU usage considerably. Input Drive Input gain-stage before the channel tape input for added warmth and distortion. This setting is inactive when the Multi-Track Tape Machine is disabled. Tape Gain Controls the input gain of the channel. This will increase the amount of tape distortion and compression. This setting is inactive when the Multi-Track Tape Machine is disabled.

Output Gain Controls the output gain of the channel from the Multi-Track Tape Machine. This setting is inactive when the Multi-Track Tape Machine is disabled. Mastering Effects The mastering effects section which is accessed by enabling the MASTER button gives you access to a mastering effects chain which includes a 2-band parametric EQ with low and hi shelving, a dynamics compressor, a multi-mode LPF/HPF and a distortion unit. Each section has an enable/bypass switch so you can quickly compare the processed and un-processed sound. Master / Settings Browser The Master / Settings browser which is accessed by enabling the BROWSER button allows you to load mastering effects presets from the factory library. You are also free to save mastering effects presets to any location on your machine although we recommend saving presets to the user folder so you can recall your favourite settings using the browser. /Presets/Master Presets/User

Load Loads a Digital Revolution.nka file from an external location and loads the preset for the Multi-Track Tape Machine and Master Bus. Save Saves the current Multi-Track Tape Machine and Master Bus settings to a file that can be stored to the preset folder or another external location. Prev Selects and loads the Master Preset preceding the one currently selected in the browser. Next Selects and loads the Master Preset subsequent to the one currently selected in the browser. Instrument Settings The Instrument settings accessed by enabling the SETTINGS button gives you access to global and individual playback modes as well as 4 parallel output channels for each drum voice. The ability to change the playback modes individually gives you powerful RAM saving options for the most efficient use of the instrument. Available sample playback modes: Original - plays the sample back with the identical sound character of the original machines, recorded completely dry through an API 512c pre-amp.

Hi-Fi - plays the sample back processed through a unique high end outboard mastering chain, including gear such as an Empirical Labs Fatso & Distressor, API EQs and Pre-amps, Thermionic Culture Vulture ME, A-Designs EM-PEQ, Elsyia X-Pressor and more. Lo-fi - resamples the sound in real-time through an iconic grey 12-bit sampler in one of two different resample modes: Grit and Pitch. Each raw drum sound has been recorded and manually re-pitched 16 times. Playback Mode Sets the available playback modes for the Drum voice. This setting is for optimizing the instrument and will stop playback of the internal sequencer. Channel Output This panel assigns the channel to an external output. Pre-configured.nkm multi files are also included with outputs already assigned. Parallel Outputs 1-4 These sliders send to 'PARALLEL OUTPUTS 1-4' for the specific channel. Digital Revolution has a total of four parallel outputs which can be used for various functions including; summing drums to external tracks, integrating outside send effects and side chaining other instruments. Global Playback - Sets the available playback modes for all Drum voices. This setting is a convenient, non-realtime intended, way of switching all playback modes. When any Playback Mode is set to a dissimilar value this panel will read 'Custom'. Digital Revolution Percussion During the research and development of Digital Revolution we soon found that it would not be possible to fit absolutely every sound (including all percussion sounds) from ALL of the drum machines into a single unified instrument. In our opinion, doing so would break the design of the instrument and adversely affect its usability. The solution was to create two instruments; Digital Revolution Drum Kit - includes a limited range of percussion sounds in the Digital Revolution Drum kit e.g. rim, clave, clap, shaker and tambourine. Digital Revolution Percussion - includes all of the above as well as the more exotic percussion sounds such as timbales, guiro, congas, bongos, whistles, cabasa. You will find Digital Revolution Percussion.nki instrument In the instruments folder. The layout of which differs slightly from the Digital Revolution Drum kit.

As you can see the Digital Revolution Percussion instrument has an extra LED style selector screen underneath the main machine selector. Both selectors form a dual selector matrix system that enables you to choose the percussion sound you want for each of the 8 percussion drum voices. The Digital Revolution Percussion instrument has 8 percussion voices which are selectable using the drum voice selector buttons (see below). When you load the Digital Revolution Percussion.nki the Perc 1 voice will be selected by default. Both 82 L and Rim are highlighted meaning that the rim shot from the 82 L drum machine is currently assigned to Perc 1 (Midi note C1). A good starting point is to de-select both 82L and Rim so you have a completely initialized percussion machine (see below). By using this approach you can now start off by selecting a drum machine from the main machine selector (top) and a sound type from the bottom selector. As soon as you select a machine e.g. 83 E you will see the selector below change to show the percussion sounds available for that machine e.g. rim, cow bell, clav and clap. You can now assign any one of the available percussion sounds to the Perc 1 voice. Notice that when you choose a sound source e.g. clav the main machine selector updates to show only those machines that have a clav sound available. This gives you a lot of flexibility when it comes to sound selection enabling you to choose percussion sounds by machine type OR sound type depending on your requirements. Tip Assign the same percussion sound to all Perc voices (1-8) e.g. cow bell and change the pitch of each voice. You can now create interesting pitched percussion melodies by using the in-built sequencer or sequencing midi triggers in your DAW.

Digital Revolution Drum Modules In the main instruments folder you will also find an additional folder called Drum Modules which contains drum selector modules for each and every sound type. This is particularly useful if all you want to do is load a single sound type into your DAW e.g. a bass drum. This approach also gives you the flexibility to build your own drum kits and save them as Kontakt multi-instruments. Users of the original Transistor Revolution MKI will be used to this way of working. The key to understanding the separate modules is that instead of using a LED matrix style selector to select machines you use the Machine slider to scan through and choose any of the available kick drums from the 12 drum machines. You will find that each module has additional parameters such as Tune and accent modes. Tune Digitally re-pitches the sample playback using Kontakts internal sample engine. Ranges from -12 to +12 semitones. Acc Mode (Accent) - Velocities above the Acc. split are played at the max value. Velocities below the Acc. Split are played with the min value. Acc Mode (Level) Dynamic range is determined by velocity and limited by the Min and Max values Accent Mode (Off) All velocities are played at full volume.

Drum Module Processing Chain Each drum modules has a page selector menu which can be used to access the effects processors that make up a processing chain comprising of an EQ, Compressor, Tape Saturation, Transient Shaper, LPF/HPF and Bit Crusher. EQ Enable - Selecting this button activates the EQ in the signal chain. Comp Enable - Selecting this buttons activates the Compressor in the signal chain. Tape Enable - Selecting this buttons activates the Tape in the signal chain. Transient Shaper Enable - Selecting this buttons activates the Transient Shaper in the signal chain. HPF Enable - Selecting this buttons activates the Hi Pass Filter in signal chain. LPF Enable - Selecting this buttons activates the Low Pass Filter in the signal chain. Bit Crusher Enable - Selecting this buttons activates the Bit Crusher in the signal chain. Equalizer The Digital Revolution drum modules include a high quality four band equalizer which is modelled after the channel EQ of a classic 1980 s recording console. Among many things, this EQ is very well known for its tone sculpting with drums. Low Gain - Adjusts the amount of boost or cut at the LF Frequency. Low Frequency - Adjusts the center frequency of the low frequency band at which the boost or cut will occur. Low Bell - Toggles the bell shape of the low frequency band. If turned off the band becomes a shelf. Low Mid Freq - Adjusts the center frequency of the low-mid frequency band at which the boost or cut will occur.

Low Mid Gain - Adjusts the amount of boost or cut at the LMF Frequency. Low Mid Q - Controls the Quality (or Q) of the low-mid frequency band. For most EQs, the higher the quality, the narrower the frequency band, but with this EQ the control is reversed to match the hardware it emulates and becomes a bandwidth control. High Mid Freq - Adjusts the center frequency of the high-mid frequency band at which the boost or cut will occur. High Mid Gain - Adjusts the amount of boost or cut at the high-mid Frequency. High Mid Q - Controls the Quality (or Q) of the high-mid frequency band. For most EQs, the higher the quality, the narrower the frequency band, but with this EQ the control is reversed to match the hardware it emulates and becomes a bandwidth control. High Freq - Adjusts the center frequency of the high frequency band at which the boost or cut will occur. High Gain - Adjusts the amount of boost or cut at the HF Frequency. High Bell - Toggles the bell shape of the high frequency band. If turned off the band becomes a shelf. EQ Output - Controls the EQ output level. Compressor The included compressor is a high quality model from the same classic recording console as the EQ. As with the EQ, this compressor is extremely well known for it s ability to refine and control drum sounds. Threshold - Sets a level threshold above which the Compressor starts working. Only levels that rise above this threshold will be reduced by the compression; signals that stay below it will be left unprocessed. Ratio - Controls the amount of compression, expressed as a ratio of 'input level change' against 'output level change'. A Ratio of 1:1 means that no compression will be happening. For example, a ratio of 4:1 means for every 4 decibels of amplitude above the threshold, the output will increase by only 1 decibel.

Attack - Adjusts the time the Compressor will take to reach the full Ratio value after an input signal exceeds the Threshold level. Release - Adjusts the time the compressor will take to fall back to non-compression after the input signal falls below the threshold. Mix - Controls the dry/wet mix of the compressor. This can be used to create a parallel compression style routing, which increases the quieter signals rather than reducing the louder ones. At a setting of 100% you will only hear the compressed signal, at a setting of 0% you will only hear the unprocessed input signal. Makeup - Controls the output gain of the compressed signal. Used to compensate for the gain reduction of the effect. Wave Shaping The wave shaper section of each Digital Revolution Drum module contains two different processors which can be used to alter the drum voice from subtle tone shaping to drastic distortion. Tape Saturation models the sound of recording the original instruments post EQ/Compression to an analog tape machine. It uses a high quality oversampling model of a real tape machine and can easily range from gentle saturation with low gain setting to full out fuzz-distortion on higher settings. The Transient Shaper is a high quality model of a well loved studio drum tool which can be used to boost the attack and release of each drum voice. It is similar in some ways to the ADSR settings found on many synthesizers however, unlike an ADSR envelope, the Transient Shaper operates directly on the audio signal after it has been generated to help bring out or conceal what is already present in the sound. Tape Saturator Warmth - Controls the low frequency boost/cut of the effect. Gain - Controls the input gain of the effect. This will increase the amount of tape distortion and compression. HF Rolloff - Controls the high frequency roll off starting frequency. Frequencies above this point will be attenuated. Tape Saturation Output - Controls the Tape Saturation output level.

Transient Shaper Input - Controls the input gain to the effect. Attack - Controls the scaling of the attack portion of the input signal's volume envelope. Increasing this parameter will add more punch and decreasing it will reduce sharp attacks. Sustain - Controls the scaling of the sustain portion of the input signal's volume envelope. Increasing this parameter will add more body to the sound and decreasing it will reduce the sound's tail. Transient Shaper Output - Controls the Transient Shaper output level. Filter / Bit Crusher The filter section on each Digital Revolution instrument includes three separate processors; a Hi Pass Filter, Low Pass Filter and Bit Crusher. Both the Hi and Low Pass Filters are 4- pole ladder filters which have variable gain and resonance. A nice trick for heavily saturated drum sounds can be to use the gain from one of these filters as a makeup after the level drop from overloading the Tape Saturation. The Bit Crusher processor creates a form of distortion found in early analog digital converters. The bit crusher can be useful to create the character found in digital samplers. Hi Pass Filter Cutoff - Adjusts the frequency above which signals will be attenuated. Gain - Controls the amplitude increase after the filter. This control can be used to compensate for amplitude reduction due to the filter, or to increase the soft saturation of the effect. Resonance - With a value greater than 0, this control will boost a small frequency range around the cutoff frequency.

Low Pass Filter Cutoff - Adjusts the frequency above which signals will be attenuated. Gain - Controls the amplitude increase after the filter. This control can be used to compensate for amplitude reduction due to the filter, or to increase the soft saturation of the effect. Resonance - With a value greater than 0, this control will boost a small frequency range around the cutoff frequency. Bit Crusher Bit Depth - Re-quantizes the signal to an adjustable bit depth. Fractional bit levels (such as 12.4 bits) are possible and can add considerable 'grit'. Audio CDs have a quantization depth of 16 bits, old samplers frequently used 8 or 12 bits, and 4 bits evoke memories of countless irritating children's toys. Sample Rate - Re-samples the signal to an adjustable sample rate. The resampling is done without any kind of (usually mandatory) low-pass filtering, which causes all kinds of wonderful aliasing artefacts. The sample rate goes all the way down to 50 Hz, which will not leave much of the original signal. Noise - Adds digital hiss to the audio signal. Bit Crusher Volume - Controls the Bit Crusher output level. Effects Routing The effects routing page can be used to select between four different routing options by using a click and drag with the mouse (hover over Mode A while holding the mouse and dragging up or down). Effects Routing - Switches between the four alternate signal flow options of the various effect sections.

Credits Transistor Revolution Concept, Instrument Design and Programming Matthew Fudge GUI Design Anders Hedstrom Additional Design Concept Wave Alchemy Demo Creation Demo 01: Donny Walls It s a Revolution Produced by Donny Walls www.soundcloud.com/donnyw Demo 02: Synth Patrol Nobody Else Produced by Synth Patrol, aka Garrett Rowland https://soundcloud.com/synth-patrol Demo 03: Mike Ritchie Synth Produced by Mike Ritchie www.mikeritchiemusic.com Mike is a composer, musician, and recording engineer. He plays in the band The Caravan, and is working on audio for virtual reality. Demo 04: This Sound Will Save You I Try Produced and written by This Sound Will Save You www.thissoundwillsaveyoucom This Sound Will Save is songwriter/vocalist Chloe Jones and Producer Matthew Fudge. They make Future Pop. Demo 05: The Last Survivors Life on a Wire http://thelastsurvivors.bandcamp.com/ https://soundcloud.com/the-last-survivors Produced and written by The Last Survivors, aka Garrett Rowland, Darrik Getz and Taylor Dunn Demo 06: Mike Hastings Mothership Produced by Mike Hastings http://www.soundcloud.com/mikehastings

Sampling Specifications The following table shows the approximate number of samples that make up each digital drum machine. Machine Info Drum Voices No Raw Samples (original sample mode) No of Resamples (lo-fi sample mode) No of processed samples (hi-fi sample mode) 82 L A classic digital drum machine originally manufactured in 1982 82 O A classic digital drum machine originally manufactured in 1982 83 E A classic digital drum machine originally manufactured in 1983 84 S A classic digital drum machine originally manufactured in 1984 85 E A classic digital drum machine originally manufactured in 1985 85 R2 A classic digital drum machine originally manufactured in 1985 85 R1 A classic digital drum machine originally manufactured in 1985 86 R A classic digital drum machine originally manufactured in 1986 89 N A digital machine originally Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Ride, Crash, Rim Shot, Cow Bell, Clap, Shaker, Tamb Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Ride, Crash, Shaker, Clap Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Ride, Rim Shot, Clave, Clap, Cow Bell Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Clap, Ride, Crash, Rim Shot, Cow Bell, Shaker, Tamb Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Ride, Crash, Rim Shot, Cow Bell, Clap Bongo, Conga, Timbale, Agogo, Cabasa, Maracas, Whistle, Quijada, Star Chime Bass, Snare, Hat Closed, Hat Open, Tom1, Tom 2, Tom 3, Ride, Crash, Rim Shot, Cow Bell, Clap, Tamb Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Ride, Crash, Rim Shot, Cow Bell, Clap, Conga, Timbale Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, 87 1392 87 168 2688 168 13 208 13 169 2704 169 134 2144 134 35 560 35 15 240 15 16 256 16 51 816 51

manufactured in 1989 80 R A classic analogue drum machine originally manufactured in 1980 82 R A classic analogue drum machine originally manufactured in 1982 84 R A classic analogue drum machine originally manufactured in 1984 Ride, Crash, Rim Shot, Cow Bell, Clap, Shaker, Timbale, Guiro, Chime Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Crash, Rim Shot, Clave, Cow Bell, Clap, Shaker Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Crash Bass, Snare, Hat Closed, Hat Open, Tom 1, Tom 2, Tom 3, Ride, Crash, Rim Shot, Clap 60 960 60 21 336 21 97 1552 97