Update 2008 Cable Management for Laboratory Workstations
Systematic order. The new Elabo Cable Management System for Laboratory Workstations Flexibility, adaptability and system consistency have always been features of Elabo products. While keeping a close watch on the market and an ear open for our clients needs, our aim is to match the functionality of our furniture to changing demands and also to combine state-of-the-art technology with practical and appealing design. The market has approved our approach: Elabo products continue to be market leaders and client satisfaction is increasing steadily. The new Elabo Cable Management System, for which a patent is pending, enjoys utility model protection and satisfies the desire to have a spacious and tidy workstation. Many well thought-out details make it possible to completely redesign laboratory workstations. These details are just as ingenious as they are hidden, and that s what makes them so good! The cable rack in the Orga-Panel, for example, helps to guide the cables precisely from the device to the measuring point without the cables crossing over each other or interfering with the actual measurement set-up. At another point, the cable organizer ensures tidiness in the cable channel, thus guaranteeing separate guidance of the wires of power supply and data networks and preventing mutual interference. Elabo has also taken into consideration the many adaptations and adjustments that are needed in the working world. For example, it is possible at any time to add cables and small devices or also to replace existing ones. This can all be accomplished without using any tools. 2
A simple principle - like all good ideas! 1 2 The Elabo cable management system uses new flap technology and a cable organizer that is integrated into the cable channel. 3 4 1 2 3 The covering flap opens forwards and, when lifted up, disappears completely into the underlying cable channel. Devices that extend over the covering flap do not have to be moved aside in order to open the flap. The brush strip makes it possible to pass cables through easily and without kinking. The socket strip provides an optimal power supply to the electrical devices in the cable trough as well as on the work table. 5 4 5 The cable organizer consists of separate fabric pouches. This is where surplus cables can be stored simply and in an orderly fashion. Individual lengths of cable can be withdrawn as and when required without any tangling. The cable channel still offers plenty of spare space also for running cables through to connect up rows of tables. 3
The cable organizer The cable organizer is arranged in a large cable trough under the perimeter of the cable flap at the rear of the table. It consists of several fabric pouches that are suspended separately in a corresponding bracket and can thus also be individually filled and removed. The purpose of the organizer is to arrange, sort and store cables and wires that hang down from devices on the table. Or the devices may be power supply units, because socket strips can be integrated into the cable organizer. Access to the cable organizer is extremely simple because the cable flap on the table can be opened from the front, using completely new technology. Organize things once, and they will always stay tidy! The cable channel The channel for the cable organizer is 370 mm deep and thus deeper than conventional channels (110 mm). It has always been possible to link Elabo tables together simply by cables and to run the cables and wires from table to table. The inclusion of the cable organizer still allows the cabling to be run without any problems, but offers the additional benefit of being able to store further cables and wires in a tidy fashion and also to install socket strips if necessary. The socket strip The socket strip can be integrated into the cable channel or mounted under the Orga- Panel. 4 The cable channel flap The new InForm cable channel flap is a particular highlight. Thanks to new technology it can be opened simply and comfortably from the front side of the table. Even in the open position, the edge does not create any disturbing elevation but disappears under the perimeter of the table. As a result, devices can remain standing on the table. The flap technology makes it even less complicated to arrange cables tidily. Vertical cable channels Additional vertical channels for guiding the cables are available in broad and narrow design. The narrow vertical channel is mounted at the back on the InForm multigroove extruded aluminium section. The vertical channel is covered by brush strips through which the cables and wires can be passed in or out. The broad version is also provided with brush strips and is attached laterally on the InForm multi-groove extruded aluminium section. Large amounts of cable can be housed here without any problem.
Workstation light The workstation light is mounted below the table superstructure or below the basic support unit. The Orga-Panel Elabo has come up with something quite special in the case of this additional element: The Orga-Panel is a lockable drawer located below the table superstructure. A patented cable rack is provided to hold the measuring wires in a fixed position. In addition, small parts can be safely stored in the drawer. The Orga-Panel is an important part of the tidy workstation. Wires that are led out to the front are protected by a brush strip from being damaged. A specially designed basic support unit is used to mount the Orga- Panel. The basic support unit is used to mount the Orga-Panel and is attached below table superstructures or shelf elements. Not only the Orga-Panel but also optionally and additionally (depending on the width of the table s uperstructure) a pivoting workstation light or socket strips can be attached here. The table edge The elegant new front edge of the tables is one of the obvious improvements to the laboratory furniture. This edge is made of black, low-flammable, hard PVC. It is removable and can therefore be replaced if need be. This increases the longevity and system intelligence of the Elabo laboratory furniture. The ergonomically shaped edge is anti-static and non-conducting. 5
InForm table systems with cable trough low version Technical details W x D mm System table with lowerable flap and cable trough Table top provided at the front with 70-mm postforming edge Table top covered with HPL laminate 30 mm thick. Useful depth of the cable trough 110 mm. Robust FE tube frame under the perimeter of the table top. Table legs made of multi-groove extruded aluminium sections, provided inside with two separate cable chambers. The front table legs may be set back to give more legroom. Height: 750 mm 2000 x 800 1800 x 800 1600 x 800 1500 x 800 1200 x 800 2000 x 900 1800 x 900 1600 x 900 1500 x 900 1200 x 900 2000 x 1000 1800 x 1000 1600 x 1000 1500 x 1000 1200 x 1000 70-1G ZQ 70-1A ZQ 70-1D ZQ 70-1B ZQ 70-1C ZQ 70-3G ZQ 70-3A ZQ 70-3D ZQ 70-3B ZQ 70-3C ZQ 70-2G ZQ 70-2A ZQ 70-2D ZQ 70-2B ZQ 70-2C ZQ 70-4G ZQ 70-4A ZQ 70-4D ZQ 70-4B ZQ 70-4C ZQ 70-9G ZQ 70-9A ZQ 70-9D ZQ 70-9B ZQ 70-9C ZQ 70-5G ZQ 70-5A ZQ 70-5D ZQ 70-5B ZQ 70-5C ZQ System table with lowerable flap and cable trough Table top provided all round with 3 mm glued edge strip Table top covered with HPL laminate 30 mm thick. Useful depth of the cable trough 110 mm. Robust FE tube frame under the perimeter of the table top. Table legs made of multi-groove extruded aluminium sections, provided inside with two separate cable chambers. The front table legs may be set back to give more legroom. 2000 x 850 1800 x 850 1600 x 850 1500 x 850 1200 x 850 2000 x 950 1800 x 950 1600 x 950 1500 x 950 1200 x 950 70-1G ZSQ 70-4G ZSQ 70-1A ZSQ 70-4A ZSQ 70-1D ZSQ 70-4D ZSQ 70-1B ZSQ 70-4B ZSQ 70-1C ZSQ 70-4C ZSQ 70-3G ZSQ 70-9G ZSQ 70-3A ZSQ 70-9A ZSQ 70-3D ZSQ 70-9D ZSQ 70-3B ZSQ 70-9B ZSQ 70-3C ZSQ 70-9C ZSQ Height: 750 mm 2000 x 1050 1800 x 1050 1600 x 1050 1500 x 1050 1200 x 1050 70-2G ZSQ 70-5G ZSQ 70-2A ZSQ 70-5A ZSQ 70-2D ZSQ 70-5D ZSQ 70-2B ZSQ 70-5B ZSQ 70-2C ZSQ 70-5C ZSQ System table with lowerable flap and cable trough Table top provided at the front with replaceable FlexiLine edging Table top covered with HPL laminate 30 mm thick. Useful depth of the cable trough 110 mm. Robust FE tube frame under the perimeter of the table top. Table legs made of multi-groove extruded aluminium sections, provided inside with two separate cable chambers. The front table legs may be set back to give more legroom. 2000 x 850 1800 x 850 1600 x 850 1500 x 850 1200 x 850 2000 x 950 1800 x 950 1600 x 950 1500 x 950 1200 x 950 70-1G ZFQ 70-4G ZFQ 70-1A ZFQ 70-4A ZFQ 70-1D ZFQ 70-4D ZFQ 70-1B ZFQ 70-4B ZFQ 70-1C ZFQ 70-4C ZFQ 70-3G ZFQ 70-9G ZFQ 70-3A ZFQ 70-9A ZFQ 70-3D ZFQ 70-9D ZFQ 70-3B ZFQ 70-9B ZFQ 70-3C ZFQ 70-9C ZFQ Height: 750 mm 2000 x 1050 1800 x 1050 1600 x 1050 1500 x 1050 1200 x 1050 70-2G ZFQ 70-5G ZFQ 70-2A ZFQ 70-5A ZFQ 70-2D ZFQ 70-5D ZFQ 70-2B ZFQ 70-5B ZFQ 70-2C ZFQ 70-5C ZFQ 6
with cable trough high version Technical details W x D mm System table with lowerable flap and cable trough Table top provided at front with 70 mm post-forming edge Table top covered with HPL laminate 30 mm thick. Useful depth of the cable trough 370 mm. Robust FE tube frame under the perimeter of the table top. Tablelegs made of multi-groove extruded aluminium sections, provided inside with two separate cable chambers. The front table legs may be set back to give more legroom. 2000 x 800 1800 x 800 1600 x 800 1500 x 800 1200 x 800 2000 x 900 1800 x 900 1600 x 900 1500 x 900 1200 x 900 70-1G ZW 70-1A ZW 70-1D ZW 70-1B ZW 70-1C ZW 70-3G ZW 70-3A ZW 70-3D ZW 70-3B ZW 70-3C ZW 70-4G ZW 70-4A ZW 70-4D ZW 70-4B ZW 70-4C ZW 70-9G ZW 70-9A ZW 70-9D ZW 70-9B ZW 70-9C ZW Height: 750 mm 2000 x 1000 1800 x 1000 1600 x 1000 1500 x 1000 1200 x 1000 70-2G ZW 70-2A ZW 70-2D ZW 70-2B ZW 70-2C ZW 70-5G ZW 70-5A ZW 70-5D ZW 70-5B ZW 70-5C ZW System table with lowerable flap and cable trough Table top provided all round with 3 mm glued edge strip Table top covered with HPL laminate 30 mm thick. Useful depth of the cable trough 370 mm. Robust FE tube frame under the perimeter of the table top. Table legs made of multi-groove extruded aluminium sections, provided inside with two separate cable chambers. The front table legs may be set back to give more legroom. 2000 x 850 1800 x 850 1600 x 850 1500 x 850 1200 x 850 2000 x 950 1800 x 950 1600 x 950 1500 x 950 1200 x 950 70-1G ZSW 70-4G ZSW 70-1A ZSW 70-4A ZSW 70-1D ZSW 70-4D ZSW 70-1B ZSW 70-4B ZSW 70-1C ZSW 70-4C ZSW 70-3G ZSW 70-9G ZSW 70-3A ZSW 70-9A ZSW 70-3D ZSW 70-9D ZSW 70-3B ZSW 70-9B ZSW 70-3C ZSW 70-9C ZSW Height: 750 mm 2000 x 1050 1800 x 1050 1600 x 1050 1500 x 1050 1200 x 1050 70-2G ZSW 70-5G ZSW 70-2A ZSW 70-5A ZSW 70-2D ZSW 70-5D ZSW 70-2B ZSW 70-5B ZSW 70-2C ZSW 70-5C ZSW System table with lowerable flap and cable trough Table top provided at the front with replaceable FlexiLine edging Table top covered with HPL laminate 30 mm thick. Useful depth of the cable trough 370 mm. Robust FE tube frame under the perimeter of the table top. Table legs made of extruded aluminium sections with multi-groove profiling, provided inside with two separate cable chambers. The front table legs may be set back to give more legroom. Height: 750 mm 2000 x 850 1800 x 850 1600 x 850 1500 x 850 1200 x 850 2000 x 950 1800 x 950 1600 x 950 1500 x 950 1200 x 950 2000 x 1050 1800 x 1050 1600 x 1050 1500 x 1050 1200 x 1050 70-1G ZFW 70-4G ZFW 70-1A ZFW 70-4A ZFW 70-1D ZFW 70-4D ZFW 70-1B ZFW 70-4B ZFW 70-1C ZFW 70-4C ZFW 70-3G ZFW 70-9G ZFW 70-3A ZFW 70-9A ZFW 70-3D ZFW 70-9D ZFW 70-3B ZFW 70-9B ZFW 70-3C ZFW 70-9C ZFW 70-2G ZFW 70-5G ZFW 70-2A ZFW 70-5A ZFW 70-2D ZFW 70-5D ZFW 70-2B ZFW 70-5B ZFW 70-2C ZFW 70-5C ZFW 7
InForm table systems Electrically powered height adjustment Technical details W x D mm Height-adjustable C-foot system table Table top provided at the front with a 70 mm postforming edge Steplessly height-adjustable (electrically powered) C-foot table frame consisting of 1 steel tube table frame 2 electrically powered aluminium lifting columns 1 up-down switch 2 aluminium foot parts 1 table top with laminate coating, provided at the rear with lowerable cable trough cover 1 cable trough - low version 130 x 100 mm (d x h) Height: 740-1135 mm 2000 x 800 1800 x 800 1600 x 800 1500 x 800 1200 x 800 2000 x 900 1800 x 900 1600 x 900 1500 x 900 1200 x 900 2000 x1000 1800 x 1000 1600 x 1000 1500 x 1000 1200 x 1000 70-1G ZC3-1Q 70-1A ZC3-1Q 70-1D ZC3-1Q 70-1B ZC3-1Q 70-1C ZC3-1Q 70-3G ZC3-1Q 70-3A ZC3-1Q 70-3D ZC3-1Q 70-3B ZC3-1Q 70-3C ZC3-1Q 70-2G ZC3-1Q 70-2A ZC3-1Q 70-2D ZC3-1Q 70-2B ZC3-1Q 70-3C ZC3-1Q Height-adjustable C-foot system table Table top provided all round with 3 mm glued edge strip Steplessly height-adjustable (electrically powered) C-foot table frame consisting of 1 steel tube table frame 2 electrically powered aluminium lifting columns 1 up-down switch 2 aluminium foot parts 1 table top with laminate coating, provided at the rear with lowerable cable trough cover 1 cable trough - low version 130 x 100 mm (d x h) Height: 740-1135 mm 2000 x 850 1800 x 850 1600 x 850 1500 x 850 1200 x 850 2000 x 950 1800 x 950 1600 x 950 1500 x 950 1200 x 950 2000 x 1050 1800 x 1050 1600 x 1050 1500 x 1050 1200 x 1050 70-1G ZC3-1SQ 70-1A ZC3-1SQ 70-1D ZC3-1SQ 70-1B ZC3-1SQ 70-1C ZC3-1SQ 70-3G ZC3-1SQ 70-3A ZC3-1SQ 70-3D ZC3-1SQ 70-3B ZC3-1SQ 70-3C ZC3-1SQ 70-2G ZC3-1SQ 70-2A ZC3-1SQ 70-2D ZC3-1SQ 70-2B ZC3-1SQ 70-2C ZC3-1SQ Height-adjustable C-foot system table Table top provided at the front with replaceable FlexiLine edging Steplessly height-adjustable (electrically powered) C-foot table frame consisting of 1 steel tube table frame 2 electrically powered aluminium lifting columns 1 up-down switch 2 aluminium foot parts 1 table top with laminate coating, provided at the rear with lowerable cable trough cover 1 cable trough - low version 130 x 100 mm (d x h) Height: 740-1135 mm 2000 x 850 1800 x 850 1600 x 850 1500 x 850 1200 x 850 2000 x 950 1800 x 950 1600 x 950 1500 x 950 1200 x 950 2000 x 1050 1800 x 1050 1600 x 1050 1500 x 1050 1200 x 1050 70-1G ZC3-1FQ 70-1A ZC3-1FQ 70-1D ZC3-1FQ 70-1B ZC3-1FQ 70-1C ZC3-1FQ 70-3G ZC3-1FQ 70-3A ZC3-1FQ 70-3D ZC3-1FQ 70-3B ZC3-1FQ 70-3C ZC3-1FQ 70-2G ZC3-1FQ 70-2A ZC3-1FQ 70-2D ZC3-1FQ 70-2B ZC3-1FQ 70-2C ZC3-1FQ Note: For Electrostatic Protected Areas (EPA), the height-adjustable (electrically powered) C-foot system tables are also a vailable in a conductive ESD variant according to IEC 61340-5-1. 8
Cable management accessories Technical details W x H mm Cable organizer 1 cable organizer to be suspended in the cable trough. The fabric pouches have two metal rails at the top. There are two guides installed in the cable trough and the metal rails are inserted into these guides. Velcro strips are attached to the metal rails to permit better storage of surplus cables. The cable organizer can only be used in conjunction with the cable compartment - high version. 965 x 250 75-8R Socket strip System 60 3 safety sockets Plastic strip with mains input plug and directly bridged mains output socket GST-18 system, Sockets rotated 45 for angled plugs. Colour: Black Other socket types available on request Socket bracket for cable channel suitable for C1-8A C1-8A 75-8T Power supply cable Safety plug + GST 18/3 Cable length: L = 3000 mm Cable length: L = 5000 mm C1-8V ZL300 C1-8V ZL500 Power connection cable Socket + GST 18/3 plug Cable length: L = 1500 mm Cable length: L = 2500 mm C1-8W ZL150 C1-8W ZL250 Socket set for cable trough consisting of: 2 socket brackets for cable trough 2 socket strips for 3 safety plug 1 connecting wire, safety type, 3 m 1 connecting wire 1.5 m or 2.5 m for table widths up to 1500 mm for table widths of 1600 mm and more 81-2X Z01 81-2X Z02 9
InForm table systems Cable management accessories Technical details W x D x H mm Cable channel end plate - low version for laterally closing off the standard cable channel, Cable trough type - low version Colour: light grey 121 x 1,5 x 105 78-1N Cable channel bridge for rows of tables - low version for joining two cable troughs in rows of tables Cable trough type - low version Colour: light grey 70 x 52 x 150 78-1Q Cable channel end plate - high version for laterally closing off the standard cable channel Cable trough type - high version Colour: light grey 60 x 1,5 x 363 78-5N Cable channel bridge for rows of tables - high version for joining two cable troughs in rows of tables Cable trough type - high version Colour: light grey 72 x 60 x 363 78-5Q Replacement table edging, Flexi- Line for table width 2000 mm for table width 1800 mm 81-6K ZB2000 81-6K ZB1800 ffor table width 1600 mm 81-6K ZB1600 for table width 1500 mm 81-6K ZB1500 for table width 1200 mm 81-6K ZB1200 Additional vertical cable channel for mounting at the rear on the In- Form multi-groove extruded aluminium section. On both sides provided laterally with brush-equipped segments to guide the cables. Manufactured from powder-coated sheet metal. 34 x 59 x 712 75-8Q Available colours: Light grey or basalt grey Delivery: 1 unit, including assembly material. 10
InForm superstructures for cable management Technical details W x Dx H mm Basic support unit for superstructures for table width 2000 mm for table width 1800 mm 1928 x 314 x 58 1728 x 314 x 58 75-8E 75-8A for table width 1600 mm 1528 x 314 x 58 75-8D for table width 1500 mm 1428 x 314 x 58 75-8B for table width 1200 mm 1128 x 314 x 58 75-8C Colour: Light grey Basic support unit for shelf element 400 mm for table width 2000 mm for table width 1800 mm 1928 x 384 x 58 1728 x 384 x 58 75-8Y 75-8U for table width 1600 mm 1528 x 384 x 58 75-8X for table width 1500 mm 1428 x 384 x 58 75-8V for table width 1200 mm 1128 x 384 x 58 75-8W Colour: Light grey Shelf element Standard with shelf board rounded at the front. 2000 x 400 x 30 1800 x 400 x 30 74-7G 74-7A 74-8G 74-8A 1600 x 400 x 30 74-7D 74-8D 1500 x 400 x 30 74-7B 74-8B 1200 x 400 x 30 74-7C 74-8C Vertical sections (pair) with attachment fittings and end caps. 34 x123x 530 74-7X ZH530 3HE table superstructures inclined and 320 mm deep Working width 376 TE Working width 336 TE 2000x340x206 1800x340x206 74-2G Z01 74-2A Z01 Working width 296 TE 1600x340x206 74-2D Z01 Working width 276 TE 1500x340x206 74-2B Z01 Working width 216 TE 1200x340x206 74-2C Z01 Vertical sections (pair) with attachment fittings and end caps. 34 x 123 x 707 74-2X ZH707 Table superstructures, System 266 for 16 BE266 for 15 BE266 2000x369x350 1800x369x350 74-4G 74-4A for 13 BE266 1600x369x350 74-4D for 12 BE266 1500x369x350 74-4B for 9 BE266 1200x369x350 74-4C Vertical sections (pair) with attachment fittings and end caps. 34 x 123 x 850 74-4X ZH850 11
InForm superstructures Cable management accessories Technical details Width mm Orga-Panel Suitable for superstructures or shelf elements. Used only in conjunction with basic support unit. 1844 1644 75-8F 75-8G Design: - front edge of the panel fitted with brush strip to permit simple guidance of cables. - easily accessible, can be pulled out - lockable - pull-out length 150 mm when fully pulled out Colour: Light grey. 1444 1344 1044 75-8H 75-8J 75-8K Light Light source: 2 x 36 W Connection: 230-240V / 50/60Hz / IP20 Parabolic grid, including 2 fluorescent lamps, electronic ballast unit Tilt angle: 0-35 Illumination intensity: lmin: 417 lx, lm: 655 lx, lmax: 843 lx 909 75-8L Installation set suitable for 75-8L 75-8M Socket strip 3 x safety plug sockets Plastic strip with power input plug and directly bridged power output socket. GST-18 system, Sockets rotated 45 for angled plugs Colour: black C1-8A Installation set suitable for C1-8A on the basic support unit. 75-8S Power supply cable Power supply cable for basic support unit. Orga-Panel wired to mains power supply Cable length: L = 500 mm 3-pole cable, 1.5 mm 2 C1-8V Z01 Power connection cable Socket + plug GST 18/3 Cable length: L = 1500 mm Cable length: L = 2500 mm 3-pole cable, 1.5 mm 2 cross section for power supply and for connecting the socket strips. System 60 C1-8W ZL150 C1-8W ZL250 12
Technical details W x D x H mm Basic support unit set consisting of: - workstation light 75-8L including installation kit 75-8M -2 socket strips each with 3 safety sockets C1-8A - 2 socket brackets for the basic support unit 75-8S - 1 safety-type connecting cable for 2 m socket strip - 1 x 2 m or 2.5 m power connection cable Note: With table widths of less than 1500 mm, not all these parts can be fitted. For table widths of up to 1500 mm 81-2Y Z01 For table widths greater than 1600 mm 81-2Y Z02 Vertical cable channel, narrow Additional vertical cable channel for rear installation. On the InForm multi-groove extruded aluminium section. On both sides provided laterally with brush-equipped segments for cable feed-through. Made of powder-coated sheet metal 34 x 59 x 530 75-8Q ZH0530 Available colours: Light grey or basalt grey Installation materials included Additional vertical cable channel, wide Additional cable channel for lateral installation on the InForm multi-groove extruded aluminium section. On both sides provided laterally with brush-equipped segments for cable lead-through. Made of powder-coated sheet metal. 120 x 51,5 x 440 75-8P ZH440 Fits under basic support unit set 75-8A.3 Available colours: Light grey or basalt grey Installation materials included Note: The vertical cable channels are configured for the following InForm height sections: 74-2X ZH707 74-4X ZH850 13
ELABO GmbH Roßfelder Straße 56 D-74564 Crailsheim Tel. +49 7951 307-0 Fax +49 7951 307-66 info@elabo.de www.elabo.de Elabo GmbH Highly flexible solutions Efficient and economical Elabo is the partner for companies and organizations that manufacture or install electrical and electronic components, or use such products for quality assurance systems. Elabo develops modular, custom-built, highly flexible and very economical systems for them.. The range of services extends from the design and outfitting of specialized work areas, such as electrical laboratories, up to customized engineering and construction of complex quality assurance installations. Elabo s capability is based on comprehensive know-how in electrical engineering and electronics, mechanics and ergonomics, process management and logistics, as well as on solid knowledge of occupational safety regulations and technical standards. Elabo is a hardware-producing knowledge provider focusing its performance on the specific requirements of its respective customers. Elabo manufactures most components in-house because we have the skills and the manufacturing facilities for top-quality implementation of concepts. Elabo LaboratorySystems assumes the entire turnkey outfitting of electrical laboratories for quality assurance, research, development and testing, for prototype manufacturing and for service workshops Elabo Electronics develops and manufactures testing devices, measuring devices and power supply units, as well as software solutions with modular programming for a wide range of test objectives. In addition, Elabo Electronics calibrates test equipment and recalibrates them to EN standards. Elabo TrainingSystems is the leading partner in training and continuing education in the occupational fields of electrical engineering, electronics and related areas. The scope of the services provided extends from the planning and the complete outfitting of the classrooms to the preparation of all teaching materials and seminars for the instructors. Elabo AssemblySystems develops and installs assembly workstations and facilities also with integrated quality testing, functional testing and safety testing systems - for manual and semi-automated manufacturing. Elabo was founded in 1972, has a staff of about 150 employees, and is the leader in its market all across Europe. Elabo TestSystems provides the engineering and the implementation of compact testing stations, complex test installations and process-integrated testing networks for comprehensive quality assurance in the electrical industry and in industries that use electronics. Process ControlSystems implements process control centres for the monitoring and control of processes in industry and in the power supply sector, in EDP and in computer centres, in traffic management and building management, as well as in safety engineering and in many other areas. 7620UKE/30-10-08