v1.0.0 MANAGEMENT SOFTWARE FOR CCTV 2016 EFFECTIVE PRICES SINCE FEBRUARY 2 ND, 2016
INDEX 2016 GENERAL SALES TERMS 2016 3 6.1 SW for CCTV 6 AXIS SW for CCTV 6 AXIS Additional Licenses 7 SW for CCTV 8 DAHUA SW for CCTV 9 6.2 Servers for CCTV 10 DAHUA Servers for CCTV 10 2 TEL. +34 913.750.136 FAX. +34 913.758.894 INFO@EMACS.ES WWW.EMACS.ES
2016 GENERAL SALES TERMS 1. Prices are subject to change without notice. 2. Prices are in Euros. F.O.B. EMACS, SPAIN Distribution Center, EEC Import Tax excluded. 3. All card orders are final. For details on changes or cancellations, please consult EMACS. a. Any changes required after order accepted by EMACS will involve an extension of the deadline and possibly a change in price, which will be determined by our relevant department. b. While the order is not definitively confirmed, the time indicated by EMACS until then always will be an approximation. 4. The stipulated period of delivery will be automatically extended in time to be determined by our relevant department, if two things happen: a. Introduction of amendments to the original order, at the request of the CUSTOMER while it is running. b. Delayed essential documentation, specifications, designs or clarifications requested by EMACS, to the implementation of the supply order. 5. The delivery period will be extended also in cases of irregular situations that modify the conditions of production, such as: a. Lack of material caused by the failure of our suppliers or by the absence in the domestic market of materials whose acquisition was planned in that market. b. Service disruption of transport, strikes, and other social or labour unrest, military demonstrations, wars, disasters, unusual weather causes, fires in our facilities, serious accidents indispensable machines in production order, unexpected power interruption for long periods restrictions, or opposition from the authorities. 6. During the execution of the order could be introduced any changes in the design of materials, only if this does not prejudice the quality levels of our supplies and resulting diminished assumed no guarantees for this reason. 7. Each and every one of the documents or studies of any kind as sketches, designs, reports, calculations, specifications and similar reports, supplied or shipped to the CUSTOMER are always the exclusive property of EMACS and, in any case, may be used or disclosed to third parties, without our prior written consent; giving rise to the obligation to compensate the nonfulfilment of the above. 8. In the price of materials is not included any expenses incurred by the manufacturing inspection and receiving materials to be made by the CUSTOMER or by a representative, unless specific clause; then the inspection or review must be clearly specified. 9. When, for whatever reason, the client must send goods to EMACS, will always do after obtaining an approval of a RMA (Return Number). You can contact us at (+34) 913 750 136 or by the email info@emacs.es. 10. When is received an RMA email approval, make the shipping, the procedure will be: a. Indicate clearly the RMA number in the outer packaging, which protects the computer s original packaging for a safe shipment. b. Make the shipment prepaid to the address provided in the RMA of EMACS, may be some of our offices, or at the manufacturer itself, whose address is listed correctly. c. Wait for the technical review of the product and the resolution of the technicians. 11. The product will be returned repaired and prepaid if it is under warranty and it applies, will be changed if necessary in the case that it has been purchased within five days or a repair estimate shall be sent for approval by the client in the rest of the cases. 12. Change of a defective new product: a. If within five working days of the delivery of the material, manufacturing defects are detected, an RMA request indicating the reason for the return then must be performed to proceed with the replacement. b. This request shall be sent immediately so that it can count as defective material and thus expedite the change. c. In case of acceptance of a return, EMACS will replace the defective product with another of the same model. d. In the case of negotiate the payment of the product with the commercial department, EMACS will paid in the account of the customer the amount paid by it for future purchases. e. In the case that in the customer credit there are other charges, the payment of the defective product may be used at the will of EMACS to cancel all or part of the pending credit amount. 13. The equipment will be returned with all its components, manuals and original packaging in perfect condition. 14. The RMA must be sent prepaid and in the case of defective products out of warranty, the cost of shipping and return is always borne by the customer. 15. In no case will anticipate the shipping of any product to the customer to replace another subject to RMA before the receipt in EMACS the allegedly defective equipment and once it has been reviewed and verified as defective and as it enters in the terms and conditions provided for this purpose. 16. Returns to repair a defective product: No change or bonus of defective material is accepted after this period of 5 working days from delivery of the order, time after which govern the normal warranty, shall also be requested the RMA prior to the shipping of the product. 17. The validity of the RMA number is fifteen calendar days from the date of issue, after this time no refund for revocation of the RMA will be accepted. 18. EMACS reserves the right to refuse a return material for not complying with the above conditions. 19. EMACS warranty covers manufacturing defects for a period of 2 years from the date of sale except for: Batteries, Hard Drives, CDRW/DVDRW Units, monitors and CCTV products that takes on the manufacturer s warranty and which own conditions and manufacturer s certificate are included. 20. EMACS warranty does not include wear parts or damage caused by overloading, storms or misuse or abuse of the equipment. 21. EMACS repair or replace products on warranty at no cost for parts and labor if found to the material is defective and the use, the shipping and the storage of the equipment have been suitable. 3 TEL. +34 913.750.136 FAX. +34 913.758.894 INFO@EMACS.ES WWW.EMACS.ES
2016 GENERAL SALES TERMS 22. It is up to the Department of Quality of EMACS to determine if a product under warranty must be repaired or replaced, within the established deadlines. 23. EMACS is not responsible in any way for the consequences or accidental failures that are due to a failure or negligence. 24. EMACS will have no liability for any personal injury, damage to property or any other loss based on claims that the product has failed technically or in the task for which it has been manufactured. 25. The uses of personnel outside our services to carry out work of modifications or repairs of our products, during the warranty period, immediately void the warranty. 26. All and any irregularities within the guarantee must be communicated in writing immediately, with urgent character and accompanied by information with the reasons which caused the failure, under the penalty of cancellation of that. 27. The products or components delivered to the service center for repair will generate starting from three months an amount of 2.00 in concept of storage per day, passing to be EMACS property at 6 months of deposit. a. Costs for review (workshop technician time): 73.47 / h + VAT. 28. In the case that reimbursement of the purchase amount, whole or partial is required, EMACS will make a a transfer to the IBAN confirmed (bank certificate will be required) by the customer. 29. In the case that the presence of technical staff of EMACS is required in the customer premises, he will assume the costs of travel, accommodation and maintenance of the technical staff. They will bill the hours spent, with a maximum of 8 hours per working day. The service will be billed according to the current service fee. 30. All material left on deposit by the customer will be billed if 30 days have elapsed since the deposit is made, and has not been returned to our warehouse. They will also be billed when the material is not returned in perfect condition, including the preservation of its packaging. 31. Repair or modification or replacement of parts during the warranty period does not involve the extension of the term thereof. 32. Parts replaced within the warranty period shall be in possession or under possession of EMACS. 33. All trademarks and registered trademarks are the properties of their respective companies. 4 TEL. +34 913.750.136 FAX. +34 913.758.894 INFO@EMACS.ES WWW.EMACS.ES
6.0 5 SOFTWARE Control Elements for CCTV Systems SOFTWARE CATALOG 2016 VERSION 1.0.0 EFFECTIVE PRICES SINCE FEBRUARY 2ND, 2016
6.1 SW for CCTV Video IP Channels Licenses AXIS SW for CCTV 0202-032 AXIS Camera Station 1 license add-on License for 1 additional AXIS network video channel to AXIS Camera Station 4 or 10 license base pack. Requires the base pack to be pre-installed. Delivered as a license code in an envelope. 83,00 0202-002 AXIS Camera Station 10 license base pack EN In English. AXIS Camera Station is a monitoring and recording system for small and midsize installations optimized to take full advantage of AXIS leading network cameras and video encoders. It combines easy setup with an intuitive user interface for efficient operation, quick investigation and high definition identification. Base pack with a license for 10 AXIS network video channels. Delivered in a box with CD-ROM and QIG. 839,00 0202-130 AXIS Camera Station 10 license base pack ES In Spanish. AXIS Camera Station is a monitoring and recording system for small and midsize installations optimized to take full advantage of AXIS leading network cameras and video encoders. It combines easy setup with an intuitive user interface for efficient operation, quick investigation and high definition identification. Base pack with a license for 10 AXIS network video channels. Delivered in a box with CD-ROM and QIG. 839,00 0202-052 AXIS Camera Station 4 license base pack EN In English. AXIS Camera Station is a monitoring and recording system for small and midsize installations optimized to take full advantage of AXIS leading network cameras and video encoders. It combines easy setup with an intuitive user interface for efficient operation, quick investigation and high definition identification. Base pack with a license for 4 AXIS network video channels. Delivered in a box with CD-ROM and QIG. 335,00 0202-230 AXIS Camera Station 4 license base pack ES In Spanish. AXIS Camera Station is a monitoring and recording system for small and midsize installations optimized to take full advantage of AXIS leading network cameras and video encoders. It combines easy setup with an intuitive user interface for efficient operation, quick investigation and high definition identification. Base pack with a license for 4 AXIS network video channels. Delivered in a box with CD-ROM and QIG. 335,00 0202-012 AXIS Camera Station 5 license add-on License for 5 additional AXIS network video channel to AXIS Camera Station 4 or 10 license base pack. Requires the base pack to be pre-installed. Delivered as a license code in an envelope. 419,00 0202-262 AXIS Camera Station 20 license add-on License for 20 additional AXIS network video channel to AXIS Camera Station 4 or 10 license base pack. Requires the base pack to be pre-installed. Delivered as a license code in an envelope. 1.662,00 0202-600 AXIS Camera Station 4 license base pack elicense AXIS Camera Station is a monitoring and recording system for small and midsize installations optimized to take full advantage of AXIS leading network cameras and video encoders. It combines easy setup with an intuitive user interface for efficient operation, quick investigation and high definition identification. Base pack with a license for 4 AXIS network video channels. Note: elicenses are non-cancellable, non-changeable and non-returnable. 335,00 6 TEL. +34 6 913.750.136 FAX. +34 913.758.894 INFO@EMACS.ES WWW.EMACS.ES
6.1 SW for CCTV Video IP Channels Licenses AXIS SW for CCTV 0202-601 AXIS Camera Station 10 license base pack elicense AXIS Camera Station is a monitoring and recording system for small and midsize installations optimized to take full advantage of AXIS leading network cameras and video encoders. It combines easy setup with an intuitive user interface for efficient operation, quick investigation and high definition identification. Base pack with a license for 10 AXIS network video channels. Note: elicenses are non-cancellable, non-changeable and non-returnable. 839,00 0202-602 AXIS Camera Station 1 license add-on elicense License for 1 additional AXIS network video channel to AXIS Camera Station 4 or 10 license base pack. Requires the base pack to be pre-installed. elicenses are non-cancellable, non-changeable and non-returnable. 83,00 0202-603 AXIS Camera Station 5 license add-on elicense License for 5 additional AXIS network video channel to AXIS Camera Station 4 or 10 license base pack. Requires the base pack to be pre-installed. elicenses are non-cancellable, non-changeable and non-returnable. 419,00 0202-607 AXIS Camera Station 20 license add-on elicense License for 20 additional AXIS network video channel to AXIS Camera Station 4 or 10 license base pack. Requires the base pack to be pre-installed. elicense. elicenses are non-cancellable, non-changeable and non-returnable. 1.662,00 AXIS Additional Licenses 0333-011 AXIS Cross Line Detection License code that grants installation of AXIS Cross Line Detection application on one camera/encoder. Visit www.axis. com for supported cameras/encoders products and download of the application. 24,00 0333-031 AXIS Cross Line Detection 10-pack License code that grants installation of AXIS Cross Line Detection application on up to 10 cameras/encoders. Visit www. axis.com for supported cameras/encoders products and download of the application. 234,00 0333-051 AXIS Cross Line Detection 50-pack License code that grants installation of AXIS Cross Line Detection application on up to 50 cameras/encoders. Visit www. axis.com for supported cameras/encoders products and download of the application. 1.141,00 7 TEL. +34 7 913.750.136 FAX. +34 913.758.894 INFO@EMACS.ES WWW.EMACS.ES
6.1 SW for CCTV Video IP Channels Licenses AXIS Additional Licenses 0160-050 AXIS H. 264 50-user decoder license pack A license document that grants installation of AXIS AVC/H.264 decoder onto 50 separate computers. Applicable for all AXIS products that supports H.264 but does not have support for audio. 38,00 0160-060 AXIS H.264 +AAC decoder 50-user decoder license pack A license document that grants installation of AXIS AVC/H.264 and ACC decoder onto 50 separate computers. Applicable for all AXIS products that supports H.264 that also have support for audio. 46,00 0160-040 AXIS MPEG-4 +AAC decoder 50-user license A license document that grants installation of AXIS MPEG-4 and AAC decoder onto 50 separate computers. Applicable for all AXIS products that supports MPEG-4. Required for models that supports AAC audio encoding (e.g. models: 207, 207W, 207MW, 212PTZ, 216FD, 223M) 58,00 0160-030 AXIS MPEG-4 Decoder 50-user license pack A license document that grants installation of AXIS MPEG-4 decoder onto 50 separate computers. Applicable for all AXIS MPEG-4 products that does not support AAC audio encoding. (e.g. models: 210, 211, 210A, 211A, 213, 214, 221, 225FD, 231D+, 232D+, 241S,241Q, 241SA, 241QA, 242SIV, 243SA, 282, 282A). 41,00 SW for CCTV IVMS-5200- VS-P16 Professional Software (16ch) software, as the core of the security industry, is a Complete, Smart and Open System that provides market-leading powerful entire solution. It offers a wide range of VMS products optimized for different types of deployment and usage, for example, safe city, traffic management, finance, buildings, retails and other industries. Up to 16 cameras. 586,85 IVMS-5200- P-VS-B512 Professional Software (512ch) software, as the core of the security industry, is a Complete, Smart and Open System that provides market-leading powerful entire solution. It offers a wide range of VMS products optimized for different types of deployment and usage, for example, safe city, traffic management, finance, buildings, retails and other industries. Up to 512 cameras. 2.288,23 IVMS-5200- P-VS-B1024 Professional Software (1024ch) software, as the core of the security industry, is a Complete, Smart and Open System that provides market-leading powerful entire solution. It offers a wide range of VMS products optimized for different types of deployment and usage, for example, safe city, traffic management, finance, buildings, retails and other industries. Up to 1024 cameras. 4.576,46 8 TEL. +34 8 913.750.136 FAX. +34 913.758.894 INFO@EMACS.ES WWW.EMACS.ES
6.1 SW for CCTV Video IP Channels Licenses SW for CCTV IVMS-5200- VS-P16 Profesional Storage Server License (64ch) Storage Server license up to 64 channels. Allows including into Professional one (1) recording server with up to 64 channels. Software Professional allows up to 16 storage servers. 1.340,54 IVMS-5200- P-VS-C ONVIF Professional License (1ch) ONVIF camera licensa, for using with Professional, for third parties cameras using ONVIF. Requires 1 license for each ONVIF channel. 89,24 VMS-5200-E Enterprise Software software, as the core of the security industry, is a Complete, Smart and Open System that provides market-leading powerful entire solution. It offers a wide range of VMS products optimized for different types of deployment and usage, for example, safe city, traffic management, finance, buildings, retails and other industries. Unlimited cameras. DAHUA SW for CCTV PSS DAHUA SMART Pro Surveillance System Smart Professional Surveillance System (SmartPSS) is a management software grants you access to all Dahua security products. SmartPSS is widely used with most Dahua surveillance and intercom systems in small to medium projects. SmartPSS maintains easy usability as well as great functionality. Monitoring, reviewing footage, smart search, intelligent alarms, hybrid tracking, every functionality is there for you for free. Support 18 languages. Support IPC, PTZ, NVR, EVS, HCVR, NVS, NKB, VDP and etc... Support up to 4 x 64 live view channels, main or sub streams optional. Support 4K cameras. Support H.265 streams. Support IPv6 devices. Support Windows 10. Support Smart Track by linking a fisheye and PTZ. Support multiple tour tasks. One channel can be split into different windows. Multiple channels can be previewed in channel zero. Auto find/import/export supported. Easy to manage up to 256 devices or 2000 channels. Up to 36 channels synchronous playback. Time bar and events playback modes available. Support joystick to control PTZ cameras. Support fisheye camera Virtual PTZ operation by mouse. Alarm can be triggered via different events including IVS. Support e-map, you can clearly view and manage all device locations. PC-NVR enables local storage recording. TV wall configuration and control. Support VDP monitoring, talking, announcement and configuration. Account management supported; and different users share different privileges. Log for event and user activities. Friendly GUI for an easy operation. Support P2P devices. Support fisheye image correction in both live viewing and playback. Mobile Phone Client working with DSS Platform. Saving login information automatically. Multichannel real-time preview: Up to 32 channels preview at the same time. Bit stream switch of video: Main stream/sub stream, all up to you. Local snapshot and recording: Keep surveillance picture and video, any time and any where. Remote PTZ control through gesture: Focus on specific areas in the live video channel. Audio talk: Make communication more convenience. Quick/ slow play and rewind of record: Multiple ways to playback, grasp every detail. E-map: Support raster map and Gis map, easily get controlof cameras. Direct open of video channel from favorites. Add favorites oropenvideo from favorites with a simple tap. Android2.3 and above. GDSS Android Client working with DAHUA DSS Platform IDSS ios Client working with DAHUA DSS Platform Mobile Phone Client working with DSS Platform. Saving login information automatically. Multichannel real-time preview: Up to 32 channels preview at the same time. Bit stream switch of video: Main stream/sub stream, all up to you. Local snapshot and recording: Keep surveillance picture and video, any time and any where. Remote PTZ control through gesture: Focus on specific areas in the live video channel. Audio talk: Make communication more convenience. Quick/ slow play and rewind of record: Multiple ways to playback, grasp every detail. E-map: Support raster map and Gis map, easily get controlof cameras. Direct open of video channel from favorites. Add favorites oropenvideo from favorites with a simple tap. iphone4, 4S, 5, 5S, 6, 6Plus, with ios 7 and above. 9 TEL. +34 9 913.750.136 FAX. +34 913.758.894 INFO@EMACS.ES WWW.EMACS.ES
6.2 Servers for CCTV Video and Storage Systems DAHUA Servers for CCTV DSS4004 General Surveillance Centre DAHUA DSS4004 Lower production cost, great advantage. DSS4004 = manager server+ stream media+ platform software+ OS. All In One/Integrated design, enable function according to need, flexible combination, wide application scope. UPnP, for deployment, take apart chassis, plug device to power, set IP, then you can use it. You do not need to debug the system and software, saving time. One-key upgrade under network connection. Seamless upgrade, store original data without loss. No need of transportation for maintenance. DSS7016D General Surveillance Centre DAHUA DSS7016D DAHUA's first embedded general surveillance management centre integrating the software and hardware together. It adopts the self-development hardware platform and installs shining new DSS3.0 software. It fully enhances the system performance and has user-friendly GUI. It is easy to install, operate. Embedded device, 30*24 stable operation. High-performance stream media transfer and storage capability. Support tier and cascade deployment. Support local storage and IP-SAN storage. Support GIS map(google, RasterMap). Support ONVIF, GB/T28181standard protocol gateway connection. Support platform SDK. Front panel can displays system service status. 10 TEL. +34 10 913.750.136 FAX. +34 913.758.894 INFO@EMACS.ES WWW.EMACS.ES
TEL. +34 913.750.136 FAX. +34 913.758.894 C\ SANTA LEONOR, 63. PLANTA 4, LOCAL I. 28037 MADRID