FOS Beam 150W 1
PRODUCT SPECIFICATIONS TECHNICAL SPECIFICATION Voltage: 100/240 Volt AC, 50/60 Hz. Power Consumption: 250 Watt. Light Source: 150 Watt LED, 6800K Beam angle: 2 Colors: 11 dichroic color filters. Gobos: 14 fixed gobos + 3 beam reducers + open. Beam: 8 facet rotating prism with indexing function & motorized focus Control: Auto, Music, DMX DMX Channels: 13. Protection Class: IP20 (for indoor use only) Width: 300 mm Depth: 200 mm Height: 450 mm Weight: 12,2 Kg SAFETY WARNING This product must be installed by a qualified professional. All maintenance must be carried out by a qualified electrician. A minimum distance of 0.5 m must be maintained between the equipment and a combustible surface. The product must always be operated in a well-ventilated area. DO NOT stare directly into the light source. Always disconnect the power before carrying out any maintenance. The earth must always be connected to the ground. Ensure that all parts of the equipment are kept clean and free of dust. 2
PROTECTION AGAINST SOLIDS AND WATER Only for IP-rated fixtures The protection level of a housing is set by applied standards. For classification there is used the IP-Code. It contains the declaration IP and two following numbers. The first number characterizes the protection against harmful effects of solids, the second is rating the water protection. It is important to distinguish whether encapsulation and harmful effect! There can be housing that is not capsuled completely but still avoids harmful effect of solids or water. PROTECTION EXAMPLES: IP20: Protection against intruding objects >12,5mm Finger protected ; No waterproofing. TYPICAL PROTECTION FOR INDOOR USE FIXTURES IP33: Protection against intruding objects >2,5mm; Falling water within an angle of 60 has no harmful effect TYPICAL PROTECTION OF LED-LIGHTS USING RECESSED POWERCON AND DMX SOCKET. This protection is linked to the mounting position of the fixture and always refers to typical mounting situation like a Floor spot used standing on the ground. IP54: complete protection against solids and low-pressure water from any side THIS TYPE OF FIXTURES CAN BE USED UNDER NORMAL OUTDOOR CONDITIONS. IP65: shielded against dust and pressurized water from any side. TYPICAL PROTECTION FOR OUTDOOR RATED EVENTFIXTURES USING WATERPROOFED POWER AND SIGNAL LINK. IP67: shielded against dust and protected for accidental briefly submerge. PROTECTION AGAINST ACCIDENTIAL SUBMERGING ON TEMPORARY FLOODED AREA. TEMPORARY USE Event equipment is designed for temporary use. This are typical purpose as concerts, festivals, theatre, clubs and disco use and referable venues. Long-term use, specially under outdoor conditions and fixed outdoor installation can bring damage in aging materials and affect the coated surface. Sealings as well as cables are made from rubber material and will age by long-term UV-emission as sunlight and should be checked frequently. LIMITATIONS OF IP PROTECTION IP-Rating doesn t mean unlimited outdoor use and protection against any kind of environmental influence! Especially sunlight and included UV will bring accelerated aging. Some fixtures need special 3
parts or processes to fit the rated IP-Protection, like mounting covers or caps or similar. Sealings and other plastic or rubber materials are aging parts. They must be checked frequently to ensure the protection and safety of the fixtures. Also specified torque of screws can affect protection! Installation Hanging: The fixture can be mounted in a hanging position using the supporting bracket. The bracket should be secured to the mounting truss or structure using a standard mounting clamp. Please note that when hanging the unit, a safety cable should also be used. UPRIGHT: The fixture can be mounted in an upright or sitting position using the supporting brackets. NOTE! If the signal cable is over 60 m between the DMX512 controller and fixture or between two fixtures, then a DMX signal amplifier is needed as well. Menu Screen You can easily navigate through menu s options with the four buttons under the screen. Navigating in the menu is simple! With the Up / Down buttons, you are moving through menu s choices, pressing Enter, you are entering the sub menu of the option you have chosen, with the Up / Down buttons you re moving through the sub menu s options, with Enter, you are confirming your choice. The fixture is equipped with a touch screen, making the navigation easier! The FOS Beam 150W offers the following options: Address: 0-512 UseMode: Channel Mode Standard User Mode* Channel Edit: Adjust the channel values for the User Mode*. No DMX mode: Keep Music Auto 4
SYS Set Advan: Scene Clear Auto Prog: Alone Maste Sound Prog: Alone Maste Lang Set: Chinese English DisplayRev: No Yes Backlight: LED On Off (30s) PanReverse: No Yes TiltReverse: No Yes Sound Sense: 0 80% Sensitivity Adjustment Reset All No Yes Temp Protection: Off at lamp xx Motor Correction 5
Motor Reposition Factory Reset Manual (Manual control of each channel) Info: Version: Shows the firmware version of the fixture. Err Info: Shows the errors of the channels, if any. Channel Modes 13 Channels 1. Pan 2. Pan Fine 3. Tilt 4. Tilt Fine 5. Pan / Tilt Speed 6. Dimmer 7. Shutter: 0 15 Shutter Open. 16 95 Gradual Strobe. 96 175 Pulse effect. 176 249 Random Strobe. 250 255 Shutter Open. 8. Color Wheel 0 4 Open White 5 9 White & Red 10 14 Red 15 19 Red & Dark Green 20 24 Dark Green 25 29 Dark Green & Blue 30 34 Blue 35 39 Blue & Yellow 40 44 Yellow 45 49 Yellow & Magenta 6
50 54 Magenta 55 59 Magenta & Orange 60 64 Orange 65 69 Orange & CTO 70 74 CTO 75 79 CTO & Light Green 80 84 Light Green 85 89 Light Green & Cyan 90 94 Cyan 95 99 Cyan & CTO 3000 100 104 CTO 3000 105 109 CTO 3000 & Pink 110 114 Pink 115 119 Pink & White 120 184 CW Rainbow 185 255 CCW Rainbow 9. Static Gobo Wheel 0 4 Open 5 9 Beam Reducer 1 10 14 Beam Reducer 2 15 19 Beam Reducer 3 20 24 Gobo 1 25 29 Gobo 2 30 34 Gobo 3 35 39 Gobo 4 40 44 Gobo 5 45 49 Gobo 6 50 54 Gobo 7 55 59 Gobo 8 60 64 Gobo 9 65 69 Gobo 10 70 74 Gobo 11 75 79 Gobo 12 80 84 Gobo 13 85 89 Gobo 14 90 129 CW Scroll 130 134 Open 135 169 CCW Scroll 170 174 Beam Reducer 1 Shake 175 179 Beam Reducer 2 Shake 180 184 Beam Reducer 3 Shake 185 189 Gobo 1 Shake 7
190 194 Gobo 2 Shake 195 199 Gobo 3 Shake 200 204 Gobo 4 Shake 205 209 Gobo 5 Shake 210 214 Gobo 6 Shake 215 219 Gobo 7 Shake 220 224 Gobo 8 Shake 225 229 Gobo 9 Shake 230 234 Gobo 10 Shake 235 239 Gobo 11 Shake 240 244 Gobo 12 Shake 245 249 Gobo 13 Shake 250 255 Gobo 14 Shake 10. Prism: 0 127 No Prism 128 255 Prism Insertion 11. Prism Rotation 0 127 Prism Index. 128 191 CW Rotation. 192 193 Stop. 194 255 CCW Rotation. 12. Focus 13. Reset & Macro: 0 79 No Function 80 240 Auto Programs 241 255 Reset (after 3 seconds) General Information Replacing a fuse: Always disconnect the fixture from main power before replacing a fuse. Use only the appropriate fuse, with the same type and rating. A fuse with different rating, can damage the fixture in case of failure. Risk of electric shock and / or fire: The fixture must be earthed, supplied always with its nominal voltage and cleaned periodically from dust. For cleaning use only, a moist cloth. Never use liquids or force water. After cleaning, let the fixture dry before use. General troubleshooting 8
Fixture is not working Check if the fuse is burnout Fixture is not responding to DMX control Check the DMX address Check the signal cable Fixtures operation is being interrupted Check the air vents and fan, if they are blocked from dust. Low brightness Check and clean the lenses and dichroic filters. 9