www.kocom.com Warranty To receive after service, have the following ready before you contact our branches. KCV-J MANUAL. Name of the product.. Model number of the product.. The area of problem.. Phone number and address at which you can be contacted. Warranty Card DIGITAL COLOR PRODUCT VIDEOPHONE MODEL DATE PURCHASED WARRANTY PERIOD AGENCY ADDRESS KOCOM Warranties the original purchaser of this product as follows. ) This product is produced under strict quality control and inspection procedures. ) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year from date of purchase free of charge. ) The following cases will be subject to charge, even during warranty period: a. Breakdown during transport, or through careless treatment, by consumer. b. Breakdown cause by unauthorized repair, or system modification. c. Breakdown caused by natural disaster or power disorder. SINCE KOREA COMMUNICATIONS CO.,LTD 96 http://www.kocom.com E-mail : export@kocom.co.kr This manual is based on the date as shown in the right and specifications are subject to change without notice for quality improvement KCV-J.0.0 Compact and elegant design Clear High-definition.9cm(. ) Digital Color LCD screen Household door video check, call and recording Korean letter subtitle (OSD) display function Memory to play visitor recording video (0 cut) function Call and talk between Guard Room and households (check leave household) Function to call other household Lobby door open Household door open (Option)
For safe use, please stick to the following cautions. Please, save this manual after reading these instructions carefully. Read and understand all instructions to set up rightly. This Cautions for Safety may include items that are not contained in specifications of the product that consumer purchases. If you need assistance with the set-up or operation, please contact with A/S center. The important marks in the manual. To help our customers to understand this manual, to prevent any personal injury or property damage, some marks are used in the manual. The marks and the drawing signs are below. Please, understand the marks before reading the manual. The meaning of the drawing signs. Sign to show what not to do Mishandling the device with ignoring this sign may result in serious injury or death. Cautions for Use This unit is not designed for security purpose. 쪾 Do not handle the unit with the wet hands. Do not place a pot with water or a small metal material on the Units. Do not cover the ventilating opening or put any metal material in the units. 쪾 During thunderstorms, avoid using this unit. 쪾There may be a remote risk of an electric shock from lighting. Do not modify the unit. Open the main gate after checking ID if the image and sound system do not work. Call A/S Do not disassemble the back and cabinet cover. Cautions for Abnormality Change the damaged electric code. Unplug this unit from plug socket and refer servicing to an authorized service center when the following conditions occur: If liquid has been spilled into the unit. 쪾 If the unit does not work normally by following the operating instructions. If the unit exhibits a distinct change in performance. 쪾 If the unit has been dropped or physically damaged. Mishandling the device with ignoring this sign may result physical injury or material damage. Sign to tell you that you should follow the instructions. Sign to tell you that you can't disassemble this unit. Sing to tell you that you need more attention including high voltages, electric shock, danger, warning) Sign to tell you that you must unplug the unit. Cautions for set-up The law limits distributing the power lines to an authorized person from government. The work from an unaurhtorized person cause fire or electric shock. Place this unit securely on a stable surface. Serious damafe and/or injury may result if the unit falls. Do not set up this unit near the leaking place because it may expose you to dangerous voltages or other risks. Even if your product is water proof, do not install it slanted place of water leakage, which can a short circuit. The work of distributing wires needs skills and experiences. So please, for assistance, contact your dealer or call service center. The communication lines should be built in being distant from the power source. This may result in the risk of fire, electric shock and communication disorder. Setting the communication lines in a high humid place such as outside without any protection from rain causes the communication disorder. Keep the hook at the wall-mounted device safe. The hook may cause the physical injury. Think about the thickness and quality of wall material. The unqualified material may make the device fall. Set the device of the wall-mounted type not to fall. Falling from an earthquake causes personal injury. Cautions for Repairs and Maintenance Keep the inside of the device clean. Having the dust inside without any cleaning for a long time causes the fire. If necessary, contact your dealer or service center to get cleaning service. Unplug this device when you want to check the inside. If there is no plug, please, turn off the circuit breaker. Unplug this device when you try to move it to another place. If the electric line is connected inside of the unit, please contact your dealer or service center. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning Warnings for Usage Do not install this unit near the water and dust, for example, in a bathroom or near the washing machine. It caused fire and electric shock. Do not install this unit near the fire, for example, near kitchen sink, heater or the like. Do not install near the noxious gar such as Hydrogen Sulfide, metal power and the like. Do not install near the water and chemicals. Do not give any damage, break and modify the plug. Overloading, heating, pulling causes the damage. Do not place the plug near the heater. The damaged code causes fire and electric shock. Do not pull the power code when unplugging. The damaged code causes fire and eclectic shock. Must pull with plug. Do not touch with wet hands. It causes the electric shock. Do not use any other voltage, except the marked regular voltage. Do not use the power terminal at the units to other electric device except the designed device. Do not install the units at the leaking place if it doesn t have any waterproof mark. Do not install the unit when the power is on. Install the circuit breaker after checking the safety such as electric shock and leakage. Turn off the power before you install or A/S Check the suitability of the lines for installing when you use the exiting lines. Do the wiring work by using the designed material. Connect the electric wire with the designed ways and ground. Do not connect with any other devices except the designed devices to compose the system. Unplug electric wire and communication lines from the units before moving to another place. Safety Instructions, Warnings and Cautions of Each System Do not disassemble this unit at will as this device is composed by precision parts. 쪾 Install the unit by following the set-up instructions of Kocom. Do not touch or insert any foreign substances, for example, sticker, magnetic, opener and the like Make U-type at the end of wires as the rain can effect on the system by following the wires during the rainy season. Videophone Separate the AC/DC lines with the hook of the wall-mounted type when installing. 쪾 Connect the lines after peeling the wires properly Do not distribute signal line with AC line. 쪾 Use the designed driver to connect the lines to terminal Do not clean the LCD with the damp cloth for cleaning. Use the only dry and soft cloth. 쪾 Do not install the main gate monitor at the leaking place. Things You Need to Know This product is designed as a home videophone and cannot use continuously like monitor camera. If there is temperature difference between inner part of camera and surrounding, dew condensation occurs on camera lens and may disturb image. If dew condensation is removed from camera lens, image quality recovers. White LED light examination range is narrower than camera shot range at night, so there is less amount of light at night than day. So it is difficult to see the face in low illumination condition due to noise increase on screen, but it is not from defect. screen (liquid crystal panel) is not in defect when some pixels always light or black out. Please install monitor and camera over cm away. Also, avoid installing at a place with too much noise, because too much noise around camera causes phone call inferiority. Do not place an object within 0cm in front of monitor. It causes phone call inferiority, especially because microphone is installed at the top of monitor. If strong light such as sunlight flows into camera module, screen saturation (or strange mark) and image shaking might occur. This is not a defect, so please do not install camera where a direct ray of light do not flow if possible. Cautions In some cases there is occurrence of product destruction, malfunction, noise mixing and picture quality deterioration due to mixing of other tool s induced voltage or thunder with communication wiring of monitor/camera, monitor/extended monitor. Do not wire with power line such as outdoor wiring or AC power, or phones and other tools. You cannot use it if you incorrectly wire the AC voltage between monitor/camera, monitor/extended monitor. Call the store or agency where you purchased this product and consult to solve the problem. Beware that unfixable damage might be caused due to authorizing AC voltage on communication wiring of monitor/camera, monitor/extended monitor. Do not ever disjoint this product. It may cause electrocution accident when touching high-voltage circuit inside this product. Outside power authorizing this product must be confirmed of product description and use rated voltage. Beware that if higher voltage is authorized, unfixable damage might be caused due to product destruction. Power must be connected to domestic voltage (product rated voltage) consent or interior wiring. If connected to other motive power or inverter-type power, product destruction, noise mixing, and picture distortion may occur. Do not drop this product. Glass is used for monitor and might break, or cause other circuit inferiority. In such case, immediately turn down the power switch, and call to consult agency or store in which this product was purchased. If installed near transmission antenna such as broadcasting station, electric wave may mix and cause picture distortion or voice mixing. Avoid installing near tools with strong electromagnetic waves such as microwaves and cell phones, or it may cause picture distortion. Do not install monitor in following places. Above or around water heater, rice-cooker, heater Place exposed to direct rays of the sun Place with temperature below 0'C such as cold store Place with high humidity such as bathroom, washroom, heated room Place with a lot of gas, dust, smoke 6 Dangerous place with sprays of water or chemicals Do not wipe with insecticide, drugs or chemicals such as thinner and alcohol, or it may damage the surface of this product. Beware of occurrence of image quality deterioration or malfunction from cause of humidity due to penetration of chemicals or water into camera s urea resins. As in the picture, it prevents temperature difference of camera (outside) and monitor (inside), and removes dew condensation caused by humidity of camera window. Camera must be installed when wall cement is completely dry. When product is installed in winter below -'C, wait for approximately hours to connect. Dew formation in monitor and camera due to temperature difference inside and outside may cause product defect. Avoid installing monitor and camera in place directly exposed to heat or where gas noxiousness is highly occurring. Camera (Outdoor, Door) Tubing Box Pipe Stop up P.V.C pipe using adiabatic substances, to prevent air circulation
Part Names Part Names MIC 0 Lens 6 9 Speaker LED Power lamp Call button 6 9 B 0 R Door Camera Product Specification 6 EMER. GUARD MENU REC Call ABSENT Front Side Back Bottom Set Emergency condition Call and talk to Guard Room/Decrease Set Menu/Move to Menu Household door or Lobby Visitor recording Check and talk at the door Set Leave condition 9 0 OPEN DEL PLAY Connector Terminal Connector Terminal Power Switch Household door or Lobby Door Open/Increase Delete stored pictures Check recorded picture Connector terminal in terminal board Door open connector terminal (Option) Power on/off switch Voltage Power Consumption Operating Temperature View Angle Minimum Illumination External Dimension Existing KC-C Door Camera and KC-C Door Camera for KCV-J0/J cannot be used interchangeably. Configuration Items DC V±V ( power supply type) Operation: less than.w -0 ~0 Horizontal: 9, Vertical:, Diagonal: 0 0. Lux (with IR LED on) (Width)90mm X (Height)mm X (Thickness)9.mm Product Specification Input Voltage Power Consumption Operating Temperature Calling Method Calling tone Calling Time Transmission Method External Dimension Wiring wiring distance 0V~(60Hz) Waiting (less than.w), Operation (W) 0 ~0 Hands-free calling (DSP) Door Camera : Ding-dong times, Guard Room Calling: Melody Sound Door calling : Automatic call close after minutes Guard Room/Video : 0-wire type [Communication A,B ( wire)/calling ( wire)/ Calling ( wire)/calling ( wire)/video ( wire) Door Camera : wire type [Power, GND, Voice, Video] (Width)mm X (Height)mm X (Thickness).mm UTP CABLE( wire) Max m Terminal board Main body supporter Pieces to fix Insertion Box IDE CABLE Pin cable (Option)
Installation Instruction Inter-household Wiring KCV-J KC-C Multiplex House/Villa Type A Multiplex House/Villa Type B Main body supporter Terminal cover Box Coax Cable Video Input/ Output screw Guard master Box You can adjust lens location by moving the lens adjustment ball up/down/left/right at the back of camera. screw fron case Installation Location Guard master Common gate lobbyphone Camera Installation Location 600 installation height standard is,00mm from the floor so that the display screen center matches with the height of eye. In this case, the center of wall hanger steel (center of pipe box) is located at,0mm from the floor. unit 00 Camera installation height standard is,0 for the lens part from the floor. In this case, the camera assembly center (pipe box) is at,90mm height from the floor. Apartment/Deluxe Complex Type Guard master unit Interphone Door panel Wiring Diagram Terminal board Door(Option) 9 :DOOR :DOOR :GND :+V 6 6 Coax Cable Video Input/ Output Senor(Option) Lobby video Integrated access device :LV SEL Lobby :POWER in_out :GND Sensor(Option) Magnetic sensor or Emergency Contact ①:Alarm Signal ②:Alarm Power ③:Emergency/ Security ④:Emergency/ Security Integrated access device 9:GUARD(Call +) 0:GUARD(Call -) :Call to Guard,Lobby -A Door :Call to Guard,Lobby -B camera Lobby video :POWER :VIDEO OUT GND :Call to Guard,Lobby -A :Call to Guard,Lobby -B :GND 6:VIDEO OUT :VOICE :VIDEO IN GND :Call to Guard,Lobby -A 6:Call to Guard,Lobby -B :VIDEO :VIDEO IN Coax Cable Video Input/Output Video Distribution Terminal Box Videophone Common gate lobbyphone Coax Cable Video Input/Output Integrated access device
Operation Method [Operation Description] Door Call Operation Operation Method [Direct Dialing Function] Calling other household Pressing any one of the 0KEY at the standby state will display Please the household number and the system is in Household Number Input Standby state. 00-0 00-0 00-0 When visitor press the Call button of camera at the door If you want to watch the door outside temporarily. You can see outside using Door Camera by pressing Call button.. After checking the screen, press Call button time to connect call, pressing more time will close the call ( screen closed). Call to the Guard Room. Calling Guard Room : Pressing Guard button will call Guard Room, and can talk with Guard when connected. (Call time: minute). Receiving call from Guard Room : sounds Guard Room Call Melody. (Guard lamp blink) Press Guard button and receive call. (Call time : minute) When visitor presses Call button from Door Camera during call with Guard Room, then visitor s video is displayed to the screen. Press Call button to talk to the visitor (Call with Guard Room is closed). You can adjust call volume by pressing Menu button during call with Guard Room. Emergency Call Indoor monitor sounds call tone, and the screen displays the visitor video. ( power lamp blinks. Video turn-on time : 0 sec) Call is connected with the visitor when pressing the Call button. ( power lamp on. Call time: minute) You can adjust call volume and screen brightness by pressing Menu button during call. Call is closed by pressing Call button after the call is completed. (Call is automatically closed after minutes. To extend the call : Press Call button times). Call is directed to the Guard Room when keep pressing the Emergency button from for more than second. (Emergency lamp blink). Guard Room equipment sounds Emergency sound and displays Emergency Occurred message. Guard Room pickup the handset and press the Call button to call the emergency household monitor immediately. Keep pressing Emergency button one more time to release Emergency. (Emergency lamp turned off) Press the Building and Household Number to call. Ex) Building 0, Household 0 0+ B +0+ # R If the Household Number is digit, call is automatically made without pressing B 00- When calling other household, press [Delete] button to delete the recent digit if you pressed the wrong keypad. Keep pressing [Delete] button will delete all numbers. Receiving call from other household 00-0 Only Household Number is required when calling the household in the same Building. Ex) 0 0+ # R Pressing # R at the Household Number Input Standby state will call the recent calling household. (Redial) 00-0 00-0 Call is connected when other party receives the call. Pressing the Call button after the call will close the call. (Call is automatically closed after minute) Press [Menu] button during call with other household to adjust the call volume. Leave Condition Setup. Leave Condition is setup when pressing the Leave button. (Leave lamp on). Pressing Leave one more time will release the Leave Condition. (Leave lamp off) If visitor calls from the household door when it is set as Leave, the call is redirected to the Guard Room. will sound Call tone with Press Call button to receive Press Call button again after Household Door and Lobby Door Open household number display when call. (Call time: minute) call is completed to close the call. a call comes from other household. (Call is automatically closed after. It is available to use when door lock is installed to Household Door or Lobby and connect. Ex) Building 0, Number 0 minute). When visitor calls from door, press Call button to connect call, and press Door Open button to open the door. Only DC door lock is available Option 9 00-0
Operation Method [Store Visitor s Photo] Please take picture and store the important recorded video. (All may be deleted by household power outage.) Screen Recording Door call screen screen is stored every time pressing the [REC] button when the is on. Visitor s image is automatically stored when calling Door or Lobby. screen is automatically stored every time when visitor calls at the household door. Play the stored screen photo Press the [PLAY] button to display recorded photo. The screen automatically closed if no button is pressed for 0 second. It will display There is no stored image when there is no photo to display. Delete Screen Image Split Screen Image 00-0-0 00 00-0-0 00 00-0-0 00 00-0-0 00 00-0-0 00 00-0-0 006 Pressing the [PLAY] button at standby state will display many photos as shown above. You can move between photos using Guard button or Door Open button. Select the photo from the Split Screen and press [PLAY] button to display it as full screen. Delete 0/ Door 00-- : VIDEO : 00-- : Displays the number of currently stored screen photo Displays current date and time Displays the Call from Door or Lobby Full Screen Image 0/ DOOR 00-- : Photo Sequence / Total Number of Storage Display the Calling Location Display the date and time of the photo is recorded. Move between the photos using Guard button or Door Open button. Pressing the [PLAY] button again will move back to the Split Screen. Delete all DOOR : CALL 00-0-0 00 00-0-0 00 00-0-0 00 00-0-0 00 00-0-0 00 00-0-0 006 Menu Configuration Menu Navigation ] Access Control Clear ] Calling Tone ] Doorbell Tone ] Screen Brightness 0 ] Security Code ] Generation Number 9999-9999 ] Time Set 00-0-0 : MENU > ] Access Control Clear ] Access Control Clear ] Calling Tone ] Doorbell Tone ] Screen Brightness ] Security Code 0 MENU > ] Calling Tone ] Doorbell Tone ] Screen Brightness ] Security Code 0 ] Generation Number 9999-9999 ] Time Set ] Generation Number 9999-9999 ] Time Set 00-0-0 : 00-0-0 : If you press a button under standby-mode, a menu screen is displayed. If you press a button once more, an arrow mark is displayed, and whenever you continuously press a, the menu item goes down step by step in the order of ) Access Control, ) Calling Tone, )Call Volume.9) Time Set. Menu Change ] Access Control Clear ] Access Control Clear ] Access Control Clear ] Calling Tone ] Calling Tone ] Calling Tone > ] Doorbell Tone > ] Doorbell Tone > ] Doorbell Tone ] Screen Brightness ] Screen Brightness ] Screen Brightness ] Security Code 0 ] Security Code ] Security Code 0 0 ] Generation Number 9999-9999 ] Generation Number 9999-9999 ] Generation Number 9999-9999 ] Time Set ] Time Set ] Time Set 00-0-0 : 00-0-0 : 00-0-0 : If you want to change the items of menu, press a button security or door open after moving to the item desired using a button. ] Access Control : Set up Access Control (Magnetic Sensor Option). If a box alarm and confirm are displayed when you select set of Access Control, check the connection status of a sensor. If Access Control is set up and a sensor is operated, an alarm rings from a monitor and a message Access Control, the building & household number of an apartment together with the alarm are displayed at a guard room. (Emergency Lamp is flickering) If you select Clear of ) Access Control on [Menu], Access Control Mode is released. - Setup Access Control for Leave If you press a button Leave before leaving your house, a leave mode is set up. (Leave Lamp is on) If you select set of ) Access Control at [Menu] when setting up a leave mode, the sensor for access control is operated after 60 seconds. To set up the access control for leave, an access control sensor should be normally connected. If a door is opened during operation of a leave mode and an access control sensor, an alarm rings at a monitor after 60 seconds and a message Access Control, the building & household number of the apartment are displayed at a guard room. (Emergency lamp is flickering) - Clear of Access Control Mode after Returning If you open a door when returning to your house, you should release a leave mode by pressing a button [Leave] within 60 seconds. (If a leave mode is released, an access control mode is automatically released) ] Calling Tone : Control the volume of Calling bell (Melody) ] Doorbell Tone : Control the volume of Doorbell The call volume with a guard room, a lobby and a household may be controlled by pressing a button case by case. ] Screen Brightness : Control the brightness of a screen ] Time Set : Whenever pressing a button in Time Set mode, the item to set is sequentially moved in the order of [Year], [Month], [Day], [Hour] and [Minute]. You may change Time Set using a button Security or Door Unlock under multifamily mode. (Time Set for Multifamily Mode) KHU-0(Main Unit) Firmware.0 or more is installed. So, time is automatically set for normal operation. A time should be periodically modified in order to prevent time drift. If you press a button [DEL] during playing back If you press a button [DEL] for seconds on the the saved image on a screen, a dialog box screen image divided, the dialog box [Do you want If you want to delete a [Do you want to delete?] is displayed on a to delete all?] is displayed, and if you press a screen, and if you press the button [DEL] once button [DEL] once more, all images become deleted. playback screen, more, the saved image becomes deleted. If you The function of [delete all] is able to be run ) Guard Number, 6) Mode Setup and ) Household Number cannot be modified and can only check because they initially are press a button [DEL]. don t want to delete it, wait until the dialog box on the screen image divided only. set up by an installer. [Do you want to delete?] will be disappeared. 0