3M High-Speed Solutions - PDF Free Download

Distance 3M Electronic Solutions Division 3M Twin Axial and AOC Solutions Addressing Physical Medium Dependent in the InifiniBand Fabric 100m 10m 1m Optical KEY FACTORS Length Power Size/weight EMI Cost Copper 10G 20G 30G 40G Speed/channel 2

3M High-Speed I/O Objectives Extend life of copper based high-speed interconnects Close the cost gap between fiber optics and copper technologies Leverage 3M s technologies and process capabilities to enable these objectives 3 3M 2011. All Rights Reserved.

3M Innovation Model Technology Platforms Abrasives Adhesives Ceramics Electronics, Software Films Microreplication Nanotechnology Non-wovens Precision Coating Vapor Processing Opportunity Drives Development and Utilization Markets Architecture & Construction Consumer & Office Display Electronics Filtration Health Care Renewable Energy Safety & Security Telecoms and Utilities Water Infrastructure The Variety of Things 3M Can Do 4

3M Twin Axial Cable * 5

Core Twin Axial Cable Platform 6

Key Innovation #1: Longitudinal vs. Spiral Wrapped Shield CONTINUOUS Shield Homogeneous in both Transverse and Longitudinal Directions C C Periodic Electrical Discontinuities L L 3M Twin Axial Cable vs. Conventional Twin Axial Cable Benefits Minimizes Insertion Loss Reduces radiated EMI 7

Insertion Loss (db) 3M Electronic Solutions Division Result is High-Performance and Resonance-Free Example below 0-5 3M Twin Axial Cable SL8800-10 -15-20 -25-30 -35 Standard spiral wrapped shields exhibit LC notch filter resonance Standard spiral wrapped Cable L C L C High loss resonance 8-40 0 5000 10000 15000 20000 Frequency (MHz)

Open Eyes to 25 Gbps Without Active Equalization 10 Gb/s 15 Gb/s Eye Height = 62.1 mv, Jitter = 9.4 ps (0.09 UI) Eye Height = 50.8 mv, Jitter = 8.9 ps (0.13 UI) 20 Gb/s 25 Gb/s Eye Height = 39.5 mv, Jitter = 9.8 ps (0.20 UI) Eye Height = 30.5 mv, Jitter = 11.1 ps (0.28 UI) 9 1 meter sample, Ag plated 30 AWG

CMPT (db) 3M Electronic Solutions Division Exceeds EMI Requirement without Added Shield Typical based on >10 samples 0 CMPT Unjacketed (Internal) Twinax Cable -10-20 10-30 -40-50 -60 0 200 400 600 800 1000 Frequency (MHz) CMPT Limit for Twinax Cable Competitor X Competitor Y 3M

3M 2011. All Rights Reserved. 3M Electronic Solutions Division Cable termination is consistent, reliable and cost effective. STEPS 1 2 3 4 Cut Strip the dielectric Strip the shield BENEFITS No wire management fixtures required Simultaneous stripping of four pairs After stripping, cable lays directly on PCB pattern Fixed position of wire distribution allows easy automation Apply to paddle card and solder For more details go to www.3mtwinax.com. Select Product Information then open Twin Axial Cable Preparation under the Instructions section. 11

Products Leveraging 3M Twin Axial Cable Technology External I/O Applications 10G SFP+ Assemblies 40G/56G QSFP+ Assemblies 4x6G external minisas Assemblies (26p) 12 Waferized 10/25 Gbps Backplane Assemblies (In development) HDMI Assemblies (In development)

Products Leveraging 3M Twin Axial Cable Technology In-the-box Applications 3M Twin Axial Cable 3M Cable Assemblies for PCIexpress Applications (CPU to CPU/GPU) 3M SATA Assemblies (CPU to HDD) 3M High Routability minisas Assemblies (36p, 68p) (CPU to HDD) 13 3M SATA and minisas Fanout Assemblies (CPU to HDD)

3M High-Speed Copper Interconnect Roadmap 3G/6G Per Ch. 8G/10G Per Ch. 14G Per Ch. 25G Per Ch. Products 25 G B2B Connector 25 G Backplane 3M Twin Axial Ribbon Cable Platform 0.8mm, 15 G Cable-to-Board 25 G Cable Assembly Customer Benefit Price/Performance Benefit Increased I/O Density EMI Control Extends Life of Cu Infrastructure i.e. Lower Total System Cost Enabling Technologies Precision Formed Shield Low k Dielectric Process And Materials Green Jacketing Materials EMI Absorbing Materials Controlled Impedance Design 14 Product roadmap driven by target account roadmaps and high value technology 3M 2011. All Rights Reserved.

3M s Fiber technology background 16

3M Fiber optic connectors and Terminations 17

Volition VF-45 Small-Form Factor Connector 18

AOC Development Challenge Customers want Lower cost Lower power Increased density Customers Need Solutions that Extend beyond the range of copper solutions A fair cost trade-off for price & performance Readily scalable solution to support roadmap 19

Light Engine traditional approach 20

3M s Light Engine Leveraging 3M Technologies & Processes Precision Molding Thermal Management Adhesives Laser Machining Coatings Micro-optics Abrasives 21

3M Active Optical Cable (AOC) Assemblies CX4 AOC (SFF8470) 20 Gbps Low Power Available Q4-11 CXP AOC (SFF8642) 120 Gbps 40G/56G QSFP+ Assemblies Anticipated Q2-12 Delivering Exceptional Cost / Performance 22 3M 2011 All Rights Reserved.

Key Innovation #1: Scalable Low Power Optical Engine Designed for high-density and low-cost Can be used in both AOCs and on-board module designs Low power per end 660 mw Passive alignment 23

1 2 3 4 5 1.Fiber 2. Alignment region 3. Adhesive trench 4. Mirror surface 5. Lens 3M Electronic Solutions Division Optical Interconnect Roadmap 3G/6G Per Ch. 10G/14G Per Ch. 25G Per Ch. 50G Per Ch. Expanded Beam Cross Section Products Active Optical Cable Assembly Platform Optical Backplane components Waveguides on Board Chip to Chip Optical Interconnect Mixed Cu/Optical Interconnect Business Benefit Price/Performance Benefit Lower System Power Consumption Increased I/O Density Enabling Technologies Firmware/ Electronics Precision V-grooves/moldings Adhesives/ Abrasives Thermal Management Coatings Laser Machining Micro-optics/processes 24 Product roadmap driven by target account roadmap and high value technology 3M 2011. All Rights Reserved.

3M is a trademark of 3M Company. Important Notice The information we are furnishing you is being provided free of charge and is based on tests performed at internal 3M laboratory facilities. While we believe that these test results are reliable, their accuracy or completeness is not guaranteed. Your results may vary due to differences in test types and conditions. This information is intended for use by persons with the knowledge and technical skills to analyze, handle and use such information. You must evaluate and determine whether the product is suitable for your intended application. The foregoing information is provided AS-IS. In providing this information makes no warranties regarding product use or performance, including any implied warranty of merchantability or fitness for a particular use Warranty; Limited Remedy; Limited Liability.. 3M s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 27