Routing Swichers 248
BVG-1500...248 TIME CODE READER BVG-1600...250 TIME CODE GENERATOR BVX-10/10P...252 COMPONENT COLOR CORRECTOR BVX-D10...254 DIGITAL COLOR CORRECTOR BVR-D10/D11...256 REMOTE CONTROL UNIT FOR THE BVX-D10 AMS-100...258 AUDIO MONITOR SPEAKER VDC-C5...260 12-PIN 12-PIN BETACAM DUBBING CABLE 249
BVG-1500 Features Reads and displays LTC, VITC and User Bits Built-in character generator Frame suppress function Waveform processing output of LTC Overview The BVG-1500 time code reads and displays longitudinal time code, vertical interval time code and can also read LTC at normal tape speed. The BVG-1500 mounts into a standard 19-inch rack and is 1U high 250
TIME CODE READER Rear Panel Specifications Inputs/outputs LTC input LTC processing output Video input Time code readout range 0.5 to 18 Vp-p, 1.5 kω (nominal), balanced 0 to 8 dbm (internally adjustable), 600 Ω, balanced 1 Vp-p, 75 Ω, Return loss: more than 36 db LTC: ±1/32 to ±110 times VITC: STILL to ±10 times Overall: STILL to ±110 times (with the INPUT SELECT switch set at AUTO, readout of LTC or VITC is automatically switched dependent upon the tape speed) General Power requirements Power consumption Operating temperature Storage temperature Dimensions 100 to 120 V AC or 220 to 240 AC ±10% adjustable, 48 to 64 Hz 20 W max. 0 C to 40 C (32 F to 104 F) -20 C to +60 C (-4 F to +140 F) Approx. 424 x 44 x 330 mm (16 3 /4 x 1 3 /4 x 13 inches) (w/h/d) (not including projecting parts and controls) Mass Approx. 4 kg (8 lb 13 0z) Supplied accessories 6-pin plug (1) 50-pin connector (1) Remote indicator labels (1 set) Rack mounting bracket (1 set) Operation and maintenance manual (1) Ordering Information BVG-1500 Time Code Reader BKG-1501 Printer Interface for BVG-1500 Features and specifications are subject to change without notice. 251
BVG-1600 Features Generation of LTC and VITC Reads LTC at normal tape speed TC color frame lock Generates user-bit data Waveform processing output of LTC Overview The BVG-1600 time code generator outputs both longitudinal and vertical interval time code, and can also read LTC at normal tape speed. The BVG-1600 mounts into a standard 19-inch rack and is 1U high 252
TIME CODE GENERATOR Rear Panel Specifications Inputs/outputs LTC input 0.5 to 18 Vp-p, 1.5 kω (nominal), balanced LTC readout range At normal playback tape speed only LTC output 0 to +8 dbm (internally adjustable), 600 Ω, balanced LTC processing output 0 to +8 dbm (internally adjustable), 600 Ω, balanced Video input 1 Vp-p, 75 Ω, Return loss: more than 36 db Video output 1 Vp-p, 75 Ω, Gain: 1 ± 0.05 K factor: Less than 1 % (2T pulse) VITC level: 550 ±50 mv Field reference input Nominal 3.5 to 8.5 Vp-p, 10 kω (The negative going edge of pulse is input in the V-blanking period of the first field) Time rest input Nominal 3.5 to 8.5 Vp-p, 1 kω Reset to 00 hours 00 minutes 00 seconds 00 frames at negative going edge of pulse General Power requirements 100 to 120 V AC or 220 to 240 AC ±10% adjustable, 48 to 64 Hz Power consumption 20 W max. Operating temperature 0 C to 40 C (32 F to 104 F) Storage temperature -20 C to +60 C (-4 F to +140 F) Dimensions Approx. 424 x 44 x 330 mm (16 3 /4 x 1 3 /4 x 13 inches) (w/h/d) (not including projecting parts and controls) Mass Approx. 4.5 kg (9 lb 15 0z) Supplied accessories 6-pin plug (1) 50-pin connector (1) Cable with 50-pin connectors (1) Remote indicator labels (1 set) Rack mounting bracket (1 set) Operation and maintenance manual (1) Ordering Information BVG-1600 Time Code Generator Features and specifications are subject to change without notice. 253
BVX-10/10P Features Color corrector for Betacam and Betacam SP VTRs Simple cable connection to VTR Supplied remote control unit Overview The BVX-10 (NTSC)/10P (PAL) is a component color corrector primarily for use with Betacam and Betacam SP VTRs. An optional VDC-C Series cable provides a simple interface between the VTR dub connector and the BVX-10/10P; separate Y/R-Y/B-Y I/O is provided via BNC connectors for general color correction use. Preset and manual RGB control of gain, set-up/black level and gamma is provided from the supplied BVR-58 remote control unit. The BVX-10/10P mounts into a standard 19-inch rack and is 1U high. The BVR-58 is also 1U high, but is half-rack width. 254
COMPONENT COLOR CORRECTOR Rear Panel Specifications Inputs/outputs Component video signal input 12-pin connector (1) BNC type (3) Y: 1.0 Vp-p, 75 Ω, sync negative R-Y/B-Y: 0.7 Vp-p, 75 Ω (at 75% color bar signal) Reference video input BNC type 1.0 Vp-p, 75 Ω, sync negative with a loop through connector and a 75 Ω termination switch Component video signal output 12-pin connector (1) BNC type (3) Y: 1.0 Vp-p, 75 Ω, sync negative R-Y/B-Y: 0.7 Vp-p, 75 Ω (at 75% color bar signal) Composite video signal output BNC type (2) 1.0 Vp-p, 75 Ω, sync negative Video signal Video bandwidth DG DP K factor Y/C delay S/N ratio 30 Hz to 6 MHz (BVX-10) (with the preset subcarrier) 25 Hz to 6 MHz (BVX-10P) (with the preset subcarrier) Less than 1% (Composite output) Less than 1 (Composite output) Less than 1% (Y or composite output) Less than 20 nsec. 60 db General Power requirements 90 V to 132 V AC, 50/60Hz (BVX-10) 198 V to 264 V AC, 50/60Hz (BVX-10P) Power consumption 40 W Operating temperature 5 C to 40 C (41 F to 104 F) Storage temperature -20 C to +60 C (-4 F to +140 F) Humidity Less than 90% Mass BVX-10/10P: 6.1 kg (13 lb 7 oz) BVR-58: 0.9 kg (1 lb 16 oz) Dimensions BVX-10/10P: 424 x 44 x 410 mm (16 3 /4 x 1 3 /4 x 16 1 /4 inches) (w/h/d) BVR-58: 212 x 44 x 110 mm (8 3 /8 x 1 3 /4 x 4 3 /8 inches) (w/h/d) Supplied accessories BVR-58 Remote Control Unit (1) Remote control cable (25-pin, 5 m) (1) Brackets for rack mounting (2 sets) PSW x 4 screws for rack mounting (8) Operation and maintenance manual (1 set) Ordering Information BVX-10/10P Component Color Corrector VDC-C5 12-pin 12-pin Betacam Dubbing Cable (5 m) Features and specifications are subject to change without notice. 255
BVX-D10 Features Color corrector for 525/625 component digital or NTSC/PAL composite digital video signals Full remote control Overview The BVX-D10 is a digital color corrector, available with alternative board options to accept and output either component or composite digital signals. These I/O board options are: BKX-101C for 525/625 serial and parallel component digital signal BKX-101 for NTSC serial and parallel composite digital signals BKX-101P for PAL serial and parallel composite digital signals Control of gain, black level and gamma correction is provided for individual R, G and B signals, together with adjustment of luminance gain, chroma gain, black level, hue and output gain. Control of these parameters is provided from a BVR-D10 or BVR-D11 remote control unit. The BVR-D11 provides access to the data memory of the BVX-D10, which holds up to 99 complete control settings. These settings can also be stored in and recalled from the EDL of a BVE-9100 editing system. The BVX-D10 mounts into a standard 19-inch rack and is 2U high. Block Diagram ACTIVE LOOP THROUGH 525/625 COMPONENT/ NTSC/PAL COMPOSITE SERIAL DIGITAL VIDEO INPUT COLOR CORRECTION 1 2 3 4 525/625 COMPONENT/ NTSC/PAL COMPOSITE SERIAL DIGITAL VIDEO OUTPUT 525/625 COMPONENT/ NTSC/PAL COMPOSITE PARALLEL DIGITAL VIDEO INPUT 525/625 COMPONENT/ NTSC/PAL COMPOSITE PARALLEL DIGITAL VIDEO OUTPUT 256
DIGITAL COLOR CORRECTOR Rear Panel Specifications Inputs/outputs Serial input SERIAL INPUT (BNC type) (1), with active through output 10-bit serial signal, 75 Ω Cable length 200 m max. (when using a Belden 8281, Fujikura 5C2V or equivalent coaxial cable) Parallel input PARALLEL INPUT (D-sub 25-pin) (1) 10-bit parallel signal, 110 Ω Cable length 30 m max. Active through output BNC type (1) Active through output of an input signal 0.8 Vp-p, 75 Ω Serial output SERIAL OUTPUT 1 to 4 (BNC type) (1 each) 0.8 Vp-p, 75 Ω Parallel output PARALLEL OUTPUT (D-sub 25-pin) (1) 10-bit parallel signal, 110 Ω Video characteristics Sampling frequencies 525/625 component digital: Y: 13.5 MHz, B-Y/R-Y: 6.75 MHz NTSC composite digital: 14.318 MHz PAL composite digital: 17.734 MHz Quantization 10-bits Bandwidth 525/625 component digital: Y: 5.75 MHz, B-Y/R-Y: 2.75 MHz NTSC/PAL composite digital: Y: 6.0 MHz, B-Y/R-Y: 1.3 MHz Control Control signal REMOTE 1: D-sub 9-pin (for the optional BVR-D10 control unit) General Power requirements 85 V to 240 V AC, 50/60 Hz Power consumption 50 W Operating temperature 5 C to 40 C (41 F to 104 F) Storage temperature -20 C to +60 C (-4 F to +140 F) Humidity Not more than 90% Dimensions 424 x 88 x 450 mm (16 3 /4 x 3 1 /2 x 17 3 /4 inches) (w/h/d) Mass About 10 kg (22 lb 1 0z) Supplied accessories Rack mount bracket (2 sets) Screws for rack mounting PSW x 4 (8) AC power cord (2) AC plug adaptor (1) Operation and maintenance manual (1) Ordering Information BVX-D10 Digital Color Corrector BKX-101 Digital Input/Output Board (NTSC) BKX-101P Digital Input/Output Board (PAL) BKX-101C Digital Input/Output Board (COMPONENT) BVR-D10/D11 Remote Control Unit for the BVX-D10 RCC-5G (5m)/10G (10m)/30G (30m) 9-pin Remote Control Cables VCD-2C (2m)/5C (5m)/10C (10m) Cascade Cables Features and specifications are subject to change without notice. 257
BVR-D10 REMOTE CONTROL UNIT FOR THE BVX-D10 Rear Panel Overview The BVR-D10 is a remote control unit for the BVX-D10 digital color corrector. Connected via an optional remote control cable, the following functions of the BVX-D10 can be controlled from this unit: R, G and B gain, black level and gamma Luminance signal gain Chrominance signal gain Black level Hue Output gain The BVR-D10 mounts into a standard 19-inch rack and is 1U high. Specifications Control Control signal DIN 9-pin (1) Adjustable range Luminance gain ±3 db Chrominance gain ±3 db Black level ±20 % Hue ±15 Output gain ±3 db R/G/B gain ±3 db R/G/B black ±20 % R/G/B gamma ±15 % Supplied accessories AC power cord (2) AC plug adaptor (1) Operation and maintenance manual (1) Ordering Information BVR-D10 Remote Control Unit for the BVX-D10 BVX-D10 Digital Color Corrector RCC-5G (5 m)/10g (10 m)/30g (30 m) Remote Control Cables General Power requirements 85 V to 240 V AC, 50/60 Hz Power consumption 12 W Operating temperature 5 C to 40 C (41 F to 104 F) Storage temperature -20 C to +60 C (-4 F to +140 F) Humidity Not more than 90 % Dimensions 424 x 44 x 150 mm (w/h/d) (16 3 /4 x 1 3 /4 x 6 inches) Weight Approx. 3 kg (6 lb 10 oz) 258
BVR-D11 REMOTE CONTROL UNIT FOR THE BVX-D10 Overview The BVR-D11 is a remote control unit for the BVX-D10 digital color corrector. Connected via an optional remote control cable, the following functions of the BVX-D10 can be controlled from this unit: R, G and B gain, black level and gamma Luminance signal gain Chrominance signal gain Black level Hue Output gain Up to 99 sets of these values can be stored in and recalled from the BVX-D10 memory. The BVR-D11 mounts into a standard 19-inch rack and is 1U high. Specifications Control Control signal D-sub 9-pin (4) Conforming to RS-422A Adjustable range Luminance gain ±3 db Chrominance gain ±3 db Black level ±20 % Hue ±15 Output gain ±3 db R/G/B gain ±3 db R/G/B black ±20 % R/G/B gamma ±15 % Ordering Information BVR-D11 Remote Control Unit for the BVX-D10 BVX-D10 Digital Color Corrector RCC-5G (5 m)/10g (10 m)/30g (30 m) Remote Control Cables General Power requirements 85 V to 240 V AC, 50/60 Hz Power consumption 14 W Operating temperature 5 C to 40 C (41 F to 104 F) Storage temperature -20 C to +60 C (-4 F to +140 F) Humidity Not more than 90 % Dimensions 424 x 44 x 150 mm (w/h/d) (16 3 /4 x 1 3 /4 x 6 inches) Weight Approx. 3 kg (6 lb 10 oz) Supplied accessories ROM kit (1) AC power cord (2) AC plug adaptor (1) Plug holder B (2) Operation and maintenance manual (1) Features and specifications are subject to change without notice. 259
AMS-100 Features Optional input boards for analog, AES/EBU and SDI-embedded audio Headphone and line outputs Low magnetic field speakers Overview The AMS-100 is an audio monitor speaker with a built-in stereo amplifier and speakers. Three optional input boards are available: BKAM-101 analog input board BKAM-102 AES/EBU input board BKAM-103 SDI input board for audio embedded in an SDI signal At least one of these input boards is required for the AMS-100 to operate. A stereo headphone output and a stereo analog line-level output are provided. The built-in speakers have a low external magnetic field to allow installation adjacent to picture monitors or other sensitive equipment. The AMS-100 mounts in a standard 19-inch rack and is 1U high. 260
AUDIO MONITOR SPEAKER Rear Panel Specifications Parallel remote control interface TTL level, 10 kω, unbalanced, D-sub 25-pin (1) Monitor output: (via Remote connector) 2 ch, +4 dbm, +24 dbm max., 600 Ω Built-in speaker output 2 W + 2 W Headphone output 12 dbu at 8 Ω Frequency response 20 Hz to 20 khz ±1 db Crosstalk between channels More than 60 db at 8 khz Signal-to-noise ratio More than 84 db T.H.D. Less than 0.05 % at reference level General Power requirement Power consumption Operating temperature Dimensions Mass AC 100 to 240 V, 50/60 Hz 25 W 5 C to 40 C (41 F to 104 F) 424 x 44 x 350 mm (16 3 /4 x 1 3 /4 x 13 7 /8 inches) (w/h/d) 5 kg (11 lb) maximum Supplied accessories 19-inch rack-mount adaptor (1) Operation manual (1) Installation manual (1) Ordering Information AMS-100 Audio Monitor Speaker BKAM-101 Analog Module BKAM-102 AES/EBU Module BKAM-103 SDI Module ECD-3C (3 m)/10c (10 m)/30c (30 m) XLR-3-pin XLR-3-pin Digital Audio Interface Cable Features and specifications are subject to change without notice. 261
VDC-C5 (5 m) 12-PIN 12-PIN BETACAM DUBBING CABLE VDC-C5 (5 m) 262
Features and specifications are subject to change without notice. 263