JE4208 42 LCD TV User s Guide Please observe all safety precautions when using this product. Please read this manual careful Guide de l utilisateur du téléviseur LCD de 42 Veuillez observer toutes les mesures de sécurité en utilisant ce produit. Veuillez lire soigneusement ce manuel avant d utiliser ce produit. Français
CONTENTS Safety Precautions Important Information 3 Important Safeguards 4~5 User Guidance Information Names of each part(front View) / Accessories Names of each part(back View) 7 Mounting on a Desktop / Installation Precautions 8 Installing an Antenna Remote control 0~ Precautions / How to use remote control 2 Connection VCR Connections / Watching Video Tape 3 Satellite/Cable TV Set-Top Box Connections / Watching Cable TV 4 DVD Connections / Playing the DVD 5 PC Connections / How to use as PC Exteral Amplifier / Digital Amplifier Connenction 7 JENSEN DVD Connections for IR 8 Basic Use Powering the LCD TV / Selecting input source 9 Application Menu Operating 20 Customizing the PICTURE Settings 2 9 Customizing the AUDIO Settings 22 Customizing the TIMER Settings 23 Customizing the SETUP Settings 24~25 Customizing the LOCK Settings 2~28 Customizing the CHANNEL Settings 29~30 Maintenance and Service Trouble shooting 3 Specifications 32 2
3
4
5
POWER CH MENU SOURCE RETURN ENTER TV MUTE DVD VOL INFO EXIT EPG EJECT ANGLE PROG T F MTS SAP AS PS SCALE CC SLEEP DISP RPT ZOOM SUB T C LIST F LIST SOUND PICTURE SETUP AUDIO EQ TITLE Names of each part 2 3 4 5 Accessories 2 3 4 5 7 8 9 0
Names of each part IR OUT 2 AV2 AV ATSC NTSC IR jack Y,Pb,Pr 2 and AUDIO(R/L) jack S-VIDEO 2 3 AUDIO(R/L) OUT ( Fixed / Variable ) HDMI2 jack 7 8 Y,Pb,Pr and AUDIO(R/L) jack AV2 IN ( VIDEO and AUDIO) 2 3 RF(ATSC/NTSC) POWER ON/OFF switch 4 HDMI jack 9 AV IN (VIDEO and AUDIO) 4 AC input 5 PC and AUDIO jack 0 SPDIF 7
Mounting on a Desktop Installation Precautions Wall Mounting ensure Using the Stand 8
Installing an Antenna IR OUT 2 AV2 AV ATSC NTSC 9
Remote Control MODE LED POWER On / off for TV and DVD RETURN Return to previously viewed channel CH+/CH- Increase or Decrease channel POWER CH RETURN MENU TV MUTE DVD VOL INFO The LED will fiash RED for TV mode, and BLUE for DVD mode. TV Activate TV Mode DVD Activate DVD Mode MUTE Press once mutes audio,press again to restore audio vol+/vol- Increase or Decrease volume MENU Displays the OSD menu on the screen NAVIGATION Move up,down,left or right SOURCE ENTER EXIT INFORMATION Press INFO to display a variety of information about current channel. ENTER Press ENTER to confirm your opeartion SOURCE Displays AV Inputs EXIT PROG(DVD) EPG Displays the program guide EPG ANGLE PROG T F Digital channel selection T/F(DVD) ANGLE(DVD) Change view angle 2 3 4 5 7 8 NUMERIC KEYS FAST REVERSE(DVD) PREVIOUS(DVD) MTS/SAP Press MTS/RPT to select Stereo,SAP or Mono RPT(DVD) Repeat Selection SCALE Cycles among scale mode:wide,cinemal,normal,zoom. ZOOM(DVD) SET UP(DVD) C-LIST Press C-LIST button to display the channel list AUDIO(DVD) F-LIST Press this button to display the favourite list 9 0 AS PS MTS SAP SCALE CC SLEEP RPT ZOOM SUB T DISP C LIST F LIST SOUND PICTURE SETUP AUDIO EQ TITLE PAUSE(DVD) STOP(DVD) NEXT(DVD) FAST FORWARD(DVD) SLEEP Cycles through the LCD TV sleep time:off/5/ 0/5/30/45/0/90/20/80/240 minutes DISP(DVD) Display Time or Chapter information CC Close Caption SUB-T(DVD) PICTURE Press PICTURE to cycle select picture types: Standard/ Dynamic/ Soft/ Personal TITLE(DVD) SOUND Press SOUND to cycle select sound types: Standard/ Music/ Movie/ Personal EQ(DVD) 0
Remote Control BUTTON TV-FUNCTION DVD-FUNCTION BUTTON TV-FUNCTION DVD-FUNCTION BUTTON TV-FUNCTION DVD-FUNCTION POWER POWER POWER EPG EPG STOP CH CH+ CH- ANGLE ANGLE PLAY-PAUSE VOL VOL+ VOL- VOL+ VOL- PROG PROG PREVIOUS RETURN RETURN T F T-F FAST-REVERSE MUTE MUTE FAST-FORWARD MENU MENU 2 2 2 NEXT INFO INFO 3 3 3 MTS SAP RPT MTS-SAP RPT UP UP 4 4 4 SCALE ZOOM SCALE ZOOM DOWN DOWN 5 5 5 CC SUB T CC SUB-T LEFT LEFT SLEEP DISP SLEEP DISP RIGHT RIGHT 7 7 7 C LIST SETUP C-LIST SETUP ENTER ENTER OK 8 8 8 F LIST AUDIO F-LIST AUDIO SOURCE SOURCE SOURCE 9 9 9 SOUND EQ SOUND EQ EXIT EXIT 0 0 0 NOTE: DVD functions are intended for JENSEN DVD players only. See your JENSEN DVD manual for more information. PICTURE TITLE PICTURE TITLE
Precautions are good. has AC Power. How to use remote control 2
IR VCR Connections Terminals vary by manufacturer OUT 2 AV2 AV ATSC NTSC (Included) Connect the LCD TV S Composite In terminal to VCR s Composite OUT terminal using the included Composite cable. IR OUT 2 AV2 AV ATSC NTSC (Not Included) Watching Video Tape SOURCE 3.Press ENTER to confirm the source selection. 4.Turn on the VCR,insert the tape and press play button. 3
IR Satellite/Cable TV Set-TOP Box Connections Terminals vary by manufacturer IR OUT 2 AV2 AV ATSC NTSC Composite Cable(Included) IR OUT 2 AV2 AV ATSC NTSC (Not Included) OUT 2 AV2 AV ATSC NTSC Watching Cable TV (Not Included) SOURCE ENTER 3. Press to confirm the source selection. 4. 4
IR DVD Connections Terminals vary by manufacturer IR OUT 2 AV2 AV ATSC NTSC (Not Included) Video (Not Included).Connect LCD TV s YPbPr or YPbPr2 terminal to DVD s Video Out terminal. 2.Connect LCD TV s terminals in YPbPr or YPbPr2 to DVD s Out terminal. IR OUT 2 AV2 AV ATSC NTSC (Not Included) Cable (Not Included) OUT 2 AV2 AV ATSC NTSC (Not Included) Playing the DVD SOURCE or YPbPr2. 3. Press ENTER to confirm the source selection. 4 5
PC Connections Terminals vary by manufacturer. IR OUT 2 AV2 AV ATSC NTSC VGA (Not Included) (Not Included) VGA a VGA ( a 3.5mm (Headphone) audio cable. How to use as PC monitor SOURCE 3. Press ENTER to confirm the source selection.
IR Connection Connecting to an amplifer or home theater system. Terminals vary by manufacturer. External Amplifier (Not Included) OUT 2 AV2 AV ATSC NTSC audio output level,if AUDIO OUT is set to variable. You cannot use the Volume +/- buttons to adjust the audio output level,if AUDIO OUT is set to Fixed. Fixed audio output option is only available if the TV Speakers are set to OFF. Digital Amplifier Connections Connecting to a Digital Amplifier Terminals vary by manufacturer. <Digital Amplifier> SPDIF Cable (Not Included) IR OUT 2 AV2 AV ATSC NTSC 7
JENSEN DVD Connections for IR Connection to 2 volt JENSEN DVD player IR control. IR OUT 2 AV2 AV ATSC NTSC All JENSEN Remote Control DVD Functions can be controlled Via the TV IR receiver. You do not need to point the remote conrol at the JENSEN DVD player when this option is used. NOTE: DVD IR control is intended for JENSEN DVD players only. See your JENSEN DVD manual for more information. 8
INPUT SOURCE TV AV AV2 S-Video Component Component2 HDMI HDMI2 VGA 9
2 2 2 2 2 2 Menu Operation Use the LEFT and RIGHT buttons to select your main menu option. Allows you to customize the sound options and effects. Mode Contrast Brightness Color Tint Standard 50 50 50 0 Sound Mode Bass Treble Balance TV Speaker AVC Standard Off Off 50 50 50 Sharpness 50 SPDIF Type PCM Color Mode Normal Language Select Move MENU Exit Select Move MENU Exit TIMER MENU: Allows you to set up a variety of time options. SETUP MENU: Allows you to set up a variety of setup options. Sleep Off Menu Language Time Zone Pacific Transparency Off Daylight Saving Time Off Zoom Mode Noise Reduction Normal Off Advance Close Capation Out Variable Restore Default Select Move MENU Exit Select Move MENU Exit LOCK MENU: Allows you to set up a variety of lock options. CHANNEL MENU: Allows you to search channels and set up a variety of channel options. Change Password System US Canada RRT Setting Reset RRT On Air/Cable Auto Scan Favorite Show Hide No Label Air 50 3 KOCE LB DTV Signal Good Select Move MENU Exit Select Move MENU Exit 4 5 Press the MENU button to exit submenu to return to the main menu. Press the MENU button again or EXIT button to exit the main menu. Some options are not available for all inputs. 0
2 or EXIT button to exit. Mode Contrast Brightness Color Tint Sharpness Color Mode Standard Normal 50 50 50 0 50 Select Move MENU Exit Mode Contrast Brightness Color Tint Cycles through picture display modes: Standard, Dynamic, Soft, Personal. Controls the difference between the brightest and darkest regions of the picture. Controls the overall brightness of the picture Controls the color. Controls the tint. Sharpness Increase this setting to see crisp edges in the picture; decrease it for soft edges. Color Mode Cycles through color modes: Normal, Cool, Warm. 2
2 or EXIT button to exit Sound Mode Bass Treble Balance TV Speaker AVC SPDIF Type Language Standard Off Off PCM 50 50 50 Select Move MENU Exit Sound Mode Bass Treble Balance Cycles through sound modes: Standard, Music, Movie and Personal. Controls the relative intensity of lower pitched sounds. Controls the relative intensity of higher pitched sounds To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track. AVC SPDIF Type Language On or off (Automatic Volume Control) keep volume level steady. Allows you to select between PCM and RAW(Digital Connection to Home Theater system). Allows you to select audio languages:, French and Spanish. 22
2 Application Customizing the TIMER Settings Select TV source for example. (Press SOURCE button to select TV mode). Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the TIMER. 3. Use the UP and DOWN buttons to highlight an individual TIMER option, use the LEFT and RIGHT buttons to change the setting, and press the MENU or EXIT button to exit. Sleep Time Zone Daylight Saving Time Clock Off Pacific Off 2007 0 3 04 04PM Move Select MENU Exit The TIMER menu includes the following options : Sleep Time Zone Daylight Saving Time Allows you to set up the sleep timer : 5min, 0min, 5min, 30min, 45min, 0min, 90min, 20min, 80min, 240min and off. Allows you to select correct time zone: Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Allows you to turn on or off the daylight saving time. 23
2 2 Application Customizing the SETUP Settings Select TV source for example. (Press SOURCE button to select TV mode). Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the LEFT or RIGHT button to select the SETUP. 3. Use the UP and DOWN buttons to highlight an individual SETUP option, use the LEFT and RIGHT buttons to change the setting, and press the MENU or EXIT button to exit. Menu Language Transparency Zoom Mode Noise Reduction Advance Close Capation Out Restore Default Off Normal Off Variable Select Move MENU Exit The SETUP menu includes the following options: Menu Language Transparency Zoom Mode Noise Reduction Advance Allows you to select menu languages:, Français and Español. Allows you turn on or off the transparency function of on screen menu. Allows you to select the zoom modes: Normal, Cinema, Wide and Zoom. Allows you to select the noise reduction modes: Strong, Off, Weak, Middle. Input PC signal first, then press SOURCE button to select VGA mode, press RIGHTor ENTER button to confirm. H Pos 50 V Pos 50 Clock Phase Auto Move Adjust 50 0 MENU Exit H-Position V-Position Clock Phase Auto Allows you to use LEFT and RIGHT button to adjust the Horizontal Position. Allows you to use LEFT and RIGHT button to adjust the Vertical Position. Allows you to prolong the image. Allows you to adjust the definition. Select Auto and press RIGHT, the unit will automatically adjust all items to achieve the best setting. 24
2 2 Application Customizing the SETUP Settings Close Caption Use Down button to highlight Close Caption, then press RIGHT button or ENTER to enter into the following menu. CC Mode Basic Selection Advanced Selection Option On CC Service Move Select MENU Exit CC Mode Allows you to select the CC Modes: On, Off and CC on Mute. Basic Selection Allows you to select the basic selections: CC, CC2, CC3, CC4, Text, Text2, Text3 and Text4. Advanced Selection Allows you to select the advanced services: Service, Service2, Service3,Service4, Service 5 and Service. Option Use Down button to highlight the Option item, then press RIGHT button to enter into the following menu. Mode Font Style Font Size Font Edge Style Font Edge Color FG Color BG Color FG Opacity BG Opacity Custom Default Default Default Default Default Default Default Default Move Select MENU Exit Use UP and DOWN buttons to highlight the desired item, and use LEFT and RIGHT buttons to select. Out Use Down button to highlight OUT, then press RIGHTor LEFT button to change the low level Output.Selecting Variable will allow the user to control the output with the Volume +/- buttons.selecting Fixed enables a continuous output and volume is controlled by external device. Restore Default Restores all settings in SETUP menu to factory settings. 25
2 2 2 Application Customizing the LOCK Settings Select TV source for example. (Press SOURCE button to select TV mode). Press the POWER button to turn the LCD TV on 2. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the LOCK 3. Use the DOWN button to highlight Enter Password, use the numeric keys to input 4-digit password. After that, the screen will display the next menu. After setting, press menu or exit button to exit. NOTE: The factory password is 0000. Enter Password Change Password System On input US 4-digit password Canada RRT Setting Reset RRT MENU Exit Move NEXT MENU Exit The LOCK menu includes the following options : Change Password Use DOWN button to select Change Password, then press RIGHT or ENTER button to enter into the following menu. Enter New Password Confirm Password System 0-9 MENU Exit Input the new 4-digit password and confirm it. Allows you to turn on or off the system lock. If you turn off the system lock, then the following items(us, Canada, RRT Setting and Reset RRT) will not be used. 2
2 2 Application Customizing the LOCK Settings US Use Down button to highlight US, then press RIGHT or ENTER button to enter into the following menu. TV MPAA N A Move NEXT MENU Exit TV Use Down button to highlight TV, then press RIGHT or ENTER button to enter into the following menu. TV RATING ALL FV V S L D TV Y TV Y7 TV G TV PG TV 4 TV MA Block Move NEXT MENU Exit Use UP and DOWN buttons to select the desired rating and press ENTER button to block or unblock rating. MPAA The Movie rating (MPAA) is used for original movies rated by the Motion Association of America (MPAA) as broadcasted on cable TV and not edited for television. Use UP or DOWN button to select N/A, G, PG, PG-3, R, NC-7 or X. RATING G PG PG-3 R NC-7 X DESCRIPTION General Audiences. Movie is appropriate for all ages. Parental Guidance Suggested. May contain material not suited for younger viewers. Contains content that may not be appropriate for viewers under the age of 3. Restricted. Contains adult content, no one under 7 admitted without parent. No one 7 and under admitted. Adults only. 27
2 Application Customizing the LOCK Settings Canada Use Down button to highlight Canada, then press RIGHTor ENTER button to enter into the following menu. Canada Eng Canada Fre G G Move Select MENU Exit Canada Eng () Use LEFT and RIGHT buttons to select among: E, C, C8+, G, PG, 4+ and 8+ Canada Fre (French) Use LEFT and RIGHT buttons to select among: E, G, 8ans+, 3ans+, ans+ and 8ans+ RRT Setting Reset RRT Allows you to reset the RRT setting. 28
2 2 2 Application Customizing the CHANNEL Settings Select TV source for example. (Press SOURCE button to select TV mode). Press the POWER button to turn the LCD TV on. 2. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the CHANNEL. 3. Use the UP and DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT buttons to change the setting, and press the MENU or EXIT button to exit. Air/Cable Air Auto Scan Favorite Show Hide No Label DTV Signal 50 3 KOCE LB Good Select Move MENU Exit The CHANNEL menu includes the following options : Air/Cable Allows you to select between Air and Cable. Auto Scan Use Down button to highlight Auto Scan, then press RIGHT or ENTER button to enter into the following menu. Cable System Auto Start to Scan Move Select MENU Exit If you select Air as input signal in Antenna, you can press RIGHT or ENTER button to search the channels automatically. RF CH 7 Found 4 Move Move NEXT MENU Exit The receivable channels will be stored automatically. When searching channels, press MENU to stop. 29
2 2 Application Customizing the CHANNEL Settings If you select Cable as input signal in Antenna then you can select Cable Systems: Auto, STD, IRC and HRC. Use DOWN button to highlight Start to Scan, then press RIGHT or ENTER buttonto search the channels automatically. The receivable channels will be stored automatically. When searching channels, press MENU to stop. Favorite Allows you to add these channels as the favorite channels. Use UP or DOWN button to highlight Favorite, then press RIGHT or ENTER button to enter into the following menu. No Program Name Favorite 2 0 4 4 2 4 3 50 50 2 50 3 0 ATSC ATSC 2 ATSC 3 KOCE HD KOCE SD KOCE LB Select MENU Exit Use UP and DOWN button to highlight the desired channel, then press ENTER button to add or remove the highlighted channel as favorite. Show / Hide Allows you to show or hide the channels. Use UP or DOWN button to highlight Show / Hide, then press RIGHT or ENTER button to enter into the following menu. No Program Name Show 2 0 4 4 2 4 3 50 50 2 50 3 0 ATSC ATSC 2 ATSC 3 KOCE HD KOCE SD KOCE LB No. Select MENU Exit Use UP and DOWN button to highlight the desired channel, then press ENTER button to show or hide the highlighted channel. Displays the number of current channel. Label Displays the label of current channel. DTV Signal Displays the quality of current DTV signal. 30
Maintenance and Service Trouble shooting In case a problem occurs with your LCD TV, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized service center. Problem The screen does not appear. The screen appears too slowly after the power is turned on. Screen is too bright or too dark. Screen is too large or too small. Stripes appear on the screen and it shakes. The screen does not move. Screen appears, Voice is not heard Remote control does not work Action Is the power plug connected? Insert the power plug. Press the power button of the remote control. This problem occurs for a brief time in the process of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on. But if the screen does not come after minute contact your dealer or an authorized service center. Perform brightness adjustment or Contrast adjustment. Adjust the screen size. Stop using wireless telephones, hair dryers and electric drills. Press the PAUSE button. Check if the Pause button is pressed on external equipment.. Press the "MUTE"button. 2. Increase the sound level by pressing volume adjustment button. 3. Check if sound terminal of external input is connected properly. 4. Check if audio cables are connected properly. 5. Select and check the other input. If the sound still does not work and the other channels are the same after you have done as the above, contact your dealer or an authorized service center.. Check if main power is On. 2. Check that the batteries of the remote controller were loaded properly. 3. Check to see if any obstacle exists between the LCD TV and the remote control, then remove it, if any. 4. If the batteries are low, replace them with two new batteries. 3
Maintenance and Service Specifications LCD Panel Max. Resolution INPUT OUTPUT Power Source Power Consumption Dimension Panel Size Brightness Contrast Ratio Viewing Angle VIDEO S-VIDEO YPbPr(Component) AUDIO (L/R) PC/AUDIO(L/R) HDMI RF IR AUDIO (L/R) SPDIF 42 TFT LCD 400 2000: 7/7 920 x 080 2 2 2 2 AC 00-240V, 50/0HZ 230W 055 W x 73 H x 27 D mm Weight (G.W.) 27.5 Kg The cabinet design and electronics specifications will be modified without prior notice for performance improvement. Weight and dimensions are approximate 32
LCD Wall Mount Bracket Assembly Instructions. Lay the TV down with the rear facing up on a non-abrasive surface. 2. Remove the four screws (M4 x 20) shown in Figure A. 3.Attach wall bracket (not supplied) with the four(m4 x 20)screws,using either the 200 x 400 mount pattern shown in picture B. * Maximum Screw Length is 20mm.
LCD STAND Assembly Instructions. Remove the six screws (M4 x 0) shown in picture C with a Phillips screwdriver. 2. Remove the stand cover from the TV shown in picture D. 3. Insert the stand into the TV cabinet as shown in picture E. 4. Secure the stand using the six screws shown in picture F.
www.asaelectronics.com www.jensenrvdirect.com