S P E C F I L E PRODUCT NO.: PRODUCT NAME: MAJOR FEATURES 3-chip DLP image quality from compact and lightweight body 6000 lumens and 1000:1 contrast ratio BriteOptic Dual Lamp system with UHM lamps Dust-free construction True SXGA (1280 x 1024) resolution Digital Cinema Reality and high-speed DSP chips Built-in multi-screen processor, colour matching and edge blending Network function (remote control/e-mail) Easy installation and maintenance - 1 -
Specifications Main Unit Power supply: 220 240 V AC, 50/60 Hz Power consumption: 800 W (800 VA) (12 W during standby mode with fan stopped) DMD device: Panel size: 0.9 diagonal (5:4 aspect ratio) Display method: DMD (x 3, R/G/B), DLP system Pixels: 1,310,720 (1,280 x 1,024) x 3, total of 3,932,160 pixels Lens: Optional powered zoom/focus es Lamp: 300 W UHM lamps (x 2) (BriteOptic Dual Lamp System) Screen size: 70 600 inches (1,778 15,240 mm) diagonally (5:4 aspect ratio) *70 300 inches (1,778 7,620 mm) diagonally (5:4 aspect ratio) with the ET-D75LE5 Brightness: 6,000 lumens (dual lamp, high power mode) Centre-to-corner uniformity ratio: 90% Contrast: 1,000:1 (full on/full off, high contrast mode, with a high-contrast ) (brightness: 4,500 lumens) 600:1 (full on/full off, normal contrast mode with a standard Resolution: RGB: 1,280 x 1,024 pixels (1,600 x 1,200 pixels compatible, compression mode) Video: 560 TV lines Scanning frequency: RGB: Horizontal: 15 100 khz, Vertical: 24 120 Hz, Dot clock: 20 162 MHz * Images may not be normally displayed when projecting moving pictures with vertical frequency which is not between 45 Hz and 61 Hz. YPBPR (YCBCR): 480i: fh 15.75 khz; fv 60 Hz, 576i: fh 15.63 khz; fv 50 Hz, 480p: fh 31.5 khz; fv 60 Hz, 576p: fh 31.25 khz; fv 50 Hz, 720/60p: fh 45 khz; fv 60 Hz, 1035/60i: fh 33.75 khz; fv 60 Hz, 1080/60i: fh 33.75 khz; fv 60 Hz, 1080/50i: fh 28.13 khz; fv 50 Hz, 1080/25p: fh 28.13 khz; fv 25 Hz, 1080/24p: fh 27 khz; fv 24 Hz, 1080/24sF: fh 27 khz; fv 48 Hz, 1080/30p: fh 33.75 khz; fv 30 Hz S-Video/Video: Horizontal: 15.75/15.63 khz, Vertical: 50/60 Hz, (PAL, PAL60, PAL-M, PAL-N, SECAM, NTSC, NTSC4.43) Optical axis shift: Horizontal and vertical (powered) Keystone correction range: Vertical: ±40 (±22 with the ET-D75LE5) Installation: Ceiling/desk, front/rear Terminals: RGB1 IN: BNC x 5 R, G, B: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75Ω, HD/VD/SYNC: 1.4 Vp-p 5.0Vp-p, 75Ω (positive/negative) Y, PB, PR: Y: 1.0 p-p, 75Ω, PB,/PR: 0.7 Vp-p, 75Ω RGB2 IN/RGB1 OUT: D-sub HD 15-pin x 1, IN/OUT selection is operated with on-screen menu. R, G, B: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75Ω, HD/VD/SYNC: 75Ω, TTL (positive/negative polarity) Y, PB, PR: Y: 1.0 p-p, 75Ω, PB,/PR: 0.7 Vp-p, 75Ω VIDEO IN: BNC x 1, 1.0 Vp-p, 75Ω VIDEO OUT: BNC x 1, 1.0 Vp-p, 75Ω, active through S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75Ω SERIAL IN: D-sub 9-pin x 1 (RS-232C/422 compliant) for external controller SERIAL OUT: D-sub 9-pin x 1 (RS-232C/422 compliant) for external controller REMOTE 1 IN: M3 jack x 1 for wired remote control or link control REMOTE 1 OUT: M3 jack x 1 for wired remote control or link control REMOTE 2 IN: D-sub 9-pin x 1 for external control (parallel) Optional board slot: x 1 ET-MD95RGB RGB/YPBPR IN: BNC x 5 R, G, B: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75Ω, HD (H) / SYNC (H V) VD (V): 75Ω, TTL (positive/negative) Y, PB, PR: Y: 1.0 p-p, 75Ω, PB,/PR: 0.7 Vp-p, 75Ω, BETACAM compatible ET-MD95VM2 VIDEO BNC x 2 (IN, OUT) VIDEO IN: 1.0 Vp-p, 75Ω or high impedance (auto selection) VIDEO OUT: 1.0 Vp-p, 75Ω or high impedance (auto selection) S-VIDEO IN: BNC x 2 (Y, C) Y, C: Y: 1.0 Vp-p, C: 0.286 Vp-p, 75Ω YCBCRIN: (BNC x 3, common with VIDEO and S-VIDEO connectors) Y, CB, CR: Y: 1.0 p-p, 75Ω, PB,/PR: 0.7 Vp-p, 75Ω 2
S P E C F I L E Specifications (continued) ET-MD95SD1 SERIAL IN: BNC x 1 4:2:2 digital serial component signal (480i/576i), SMPTE 259M compliant SERIAL OUT: BNC x 1, active through ET-MD95SD2 SERIAL IN: SERIAL OUT: ET-MD95SD3 HD SERIAL IN: BNC x 1 BNC x 2 (MAIN, SUB) 4:2:2 digital serial component signal (480i/576i), SMPTE 259M compliant 4:2:2 digital serial component signal (480p), SMPTE 294M compliant 4:2:0 digital serial component signal (480p), SMPTE 294M compliant BNC x 2 (MAIN,SUB), active through 720p/1035i/1080i/1080-24p, SMPTE 292M compliant HD SERIAL OUT: BNC x 1, active through ET-MD75DV DIV-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, VGA to SXGA compatible DIV-D OUT: DVI-D 24-pin x 1, DVI 1.0 compliant, VGA to SXGA compatible VGA: 640 x 480, SXGA: 1280 x 1024 ET-MD75NT LAN: RJ-45 x 1, 10Base-T/100Base-TX, for network SERIAL: D-sub 9-pin (male) x 1, for service Power cord length: 2.5 m Cabinet material: ABS/PC Dimensions (W x H x D): 530 x 200 x 569 mm (without projection ) Weight: 19.8 kg (without projection ) Operating environment: Temperature: 0 40 C (32 104 F), 0 35 C (32 95 F) Humidity: 10% 80% (no condensation) Safety regulation: EN 60950, IEC 60950, EN 55022-B, EN55024, EN 61000-3-2, EN 61000-3-3, C-Tick, MIC Remote Control Unit Number of keys: 32 keys, 42 functions Power supply: 3 V DC (AA-size battery x 2) Operation range: Wireless: approx. 7 m when operated from directly in front of the signal receptor), wired: approx. 15 m Dimensions (W x H x D): 50 x 31 x 181 mm Weight: Approx. 110 g (including batteries) Supplied accessories: Power cord, Wireless/wired remote control unit, Remote control cable (15 m), Batteries for remote control (x 2) Optional accessories: Replacement lamp unit: Ceiling mount bracket: Dual stacking mount bracket: ET-DFD75 Carrying handle: ET-HAD75 Zoom (1.5 2.0:1): ET-D75LE1 Zoom (2.0 3.0:1): ET-D75LE2 Zoom (3.0 5.0:1): ET-D75LE3 Zoom (5.0 8.0:1): ET-D75LE4 Fixed-focus (0.8:1): ET-D75LE5 ET-LAD7500 (1 unit) ET-LAD7500W (set of two lamps) ET-PKD75 (for high ceilings) ET-PKD75S (for low ceilings) Super-contrast zoom (1.5 2.0:1): ET-D75LE1SC Super-contrast zoom (2.0 3.0:1): ET-D75LE2SC Super-contrast zoom (3.0 5.0:1): ET-D75LE3SC Super-contrast zoom (5.0 8.0:1): ET-D75LE4SC DVI board: ET-MD75DV Network board: ET-MD75NT Video/S-Video input board: ET-MD95VM2 SDI (480i/576i) input board: ET-MD95SD1 SDI (480i/576i/480p) input board: ET-MD95SD2 SDI (720p/1035i/1080i/1080-24p) input board: ET-MD95SD3 RGB/YPBPR: ET-MD95RGB DVI cable: ET-SCDV03 Wireless remote receiver: ET-RMRC1 Weights and dimensions shown are approximate. Specifications subject to change without notice. 3
S P E C F I L E Dimensions unit: mm Note: This illustration is not drawn to scale. Terminals 1 2 3 1 Remote 1 input/output 2 Remote 2 input/output 3 Serial input/output 4 S-Video input 5 Video input/output 6 RGB 1 input 7 RGB 2 input/rgb 1 output 8 Optional board slot 4 5 6 7 8 RGB IN connector pin assignment no. signal no. signal 1 R/PR 6 GND 2 G/Y 7 GND 3 B/PB 8 GND 4 GND 9 NC 5 GND 10 GND no. signal 11 NC 12 SDA* 13 HD/SYNC 14 VD 15 SCL* * Effective when connected to a PC having proper functions. 4
Standard setting-up positions H L The projector with optional ceiling mount bracket ET-PKD75 and zoom ET-D75LE1. H L The projector with optional zoom ET-D75LE1. The projector with optional ceiling mount bracket ET-PKD75 and zoom ET-D75LE1. L unit: mm Note: This illustration is not drawn to scale. Screen aspec ratio 5:4 Screen size (inch, diagonal) Projection distance (L) Zoom ET-75LE1/ ET-D75LE2/ ET-D75LE3/ ET-D75LE4/ D75LE1SC D75LE2SC D75LE3SC D75LE4SC min. max. min. max. min. max. min. max. ET-D75LE5 Zoom 70 2 168 2 891 2 925 4 409 4 421 7 405 7 412 11 966 1 131 0 1 111 556 80 2 489 3 318 3 355 5 054 5 066 8 480 8 487 13 691 1 293 0 1 269 635 90 2 809 3 745 3 784 5 699 5 711 9 555 9 562 15 415 1 455 0 1 428 714 100 3 130 4 173 4 213 6 345 6 356 10 631 10 638 17 139 1 618 0 1 587 794 120 3 771 5 027 5 071 7 635 7 647 12 781 12 788 20 587 1 942 0 1 904 952 150 4 732 6 309 6 359 9 570 9 582 16 007 16 014 25 760 2 428 0 2 380 1 190 200 6 335 8 446 8 505 12 796 12 808 21 383 21 390 34 380 3 238 0 3 173 1 587 250 7 937 10 583 10 651 16 022 16 034 26 760 26 767 43 001 4 049 0 3 967 1 984 300 9 540 12 720 12 797 19 248 19 259 32 136 32 143 51 622 4 859 0 4 760 2 380 400 12 745 16 993 17 088 25 699 25 711 42 889 42 896 68 863 0 6 347 500 15 950 21 267 21 380 32 151 32 163 53 642 53 648 86 104 0 7 934 600 19 155 25 540 25 672 38 603 38 614 64 394 64 401 103 346 0 9 520 Height from edge of projected image to the center of (H) Note: Values shown are approximate. Accuracy of values is ±5%. When keystone correction is performed, the screen size becomes smaller. 5
Screen aspec ratio 16:9 Screen size (inch, diagonal) ET-D75LE1/ D75LE1SC ET-D75LE2/ D75LE2SC Projection distance (L) Zoom ET-D75LE3/ D75LE3SC ET-D75LE4/ D75LE4SC ET-D75LE5 Height from edge of projected image to the center of (H) Zoom 65 2 249 3 000 3 034 4 574 4 585 7 680 7 686 12 407 1 173-342 1 151 404 110 3 859 5 147 5 190 7 815 7 825 13 080 13 086 21 067 1 987-578 1 948 685 150 5 290 7 055 7 106 10 695 10 706 17 881 17 887 28 764 2 710-789 2 657 934 200 7 079 9 440 9 501 14 296 14 306 23 882 23 888 38 386 3 615-1 052 3 542 1 245 300 10 656 14 209 14 292 21 497 21 507 35 884 35 890 57 630 5 424-1 577 5 313 1 867 400 14 234 18 979 19 082 28 698 28 708 47 886 47 891 76 875-2 103 7 084 500 17 811 23 749 23 873 35 899 35 909 59 887 59 893 96 119-2 629 8 855 550 19 600 26 134 26 268 39 499 39 510 65 888 65 894 105 741-2 892 9 741 Note: Values shown are approximate. Accuracy of values is ±5%. When keystone correction is performed, the screen size becomes smaller. Calculation of the projection distance: For a screen size, use the equation below to calculate the projection distance. (unit: mm) ET-D75LE1/D75LE1SC 5 : 4 minimum L (m) = (diagonal screen size in inches) x 32.051-76 maximum L (m) = (diagonal screen size in inches) x 42.735-100 16 : 9 minimum L (m) = (diagonal screen size in inches) x 35.774-76 maximum L (m) = (diagonal screen size in inches) x 47.699-100 4 : 3 minimum L (m) = (diagonal screen size in inches) x 32.820-76 maximum L (m) = (diagonal screen size in inches) x 43.366-100 ET-D75LE2/D75LE2SC 5 : 4 minimum L (m) = (diagonal screen size in inches) x 42.918-79 maximum L (m) = (diagonal screen size in inches) x 64.516-106 16 : 9 minimum L (m) = (diagonal screen size in inches) x 47.904-79 maximum L (m) = (diagonal screen size in inches) x 72.010-106 4 : 3 minimum L (m) = (diagonal screen size in inches) x 43.943-79 maximum L (m) = (diagonal screen size in inches) x 66.064-106 ET-D75LE3/D75LE3SC 5 : 4 minimum L (m) = (diagonal screen size in inches) x 64.516-96 maximum L (m) = (diagonal screen size in inches) x 107.527-121 16 : 9 minimum L (m) = (diagonal screen size in inches) x 72.010-96 maximum L (m) = (diagonal screen size in inches) x 120.017-121 4 : 3 minimum L (m) = (diagonal screen size in inches) x 66.064-96 maximum L (m) = (diagonal screen size in inches) x 110.108-121 ET-D75LE4/D75LE4SC 5 : 4 minimum L (m) = (diagonal screen size in inches) x 107.527-116 maximum L (m) = (diagonal screen size in inches) x 172.138-102 16 : 9 minimum L (m) = (diagonal screen size in inches) x 120.017-116 maximum L (m) = (diagonal screen size in inches) x 192.442-102 4 : 3 minimum L (m) = (diagonal screen size in inches) x 110.108-116 maximum L (m) = (diagonal screen size in inches) x 176.269-102 ET-D75LE5 5 : 4 (fixed focus) L (m) = (diagonal screen size in inches) x 16.207-3 16 : 9 (fixed focus) L (m) = (diagonal screen size in inches) x 18.090-3 4 : 3 (fixed focus) L (m) = (diagonal screen size in inches) x 16.600-3 6
Optical shift range Floor mount Ceiling mount 7