Engineer Spec of LK-VT-W22ONDW Date : 2009/02/02 Version: 1.00 Prepare by : Check by : Page 1 of 15
REVISION HISTORY Version Date Page Section Description 1.0 2009/02/02 ALL ALL New Release Page 2 of 15
Table of Contents 1. ELECTRICAL PERFORMANCE.4 2. PICTURE PERFORMANCE..6 3. LUMINANCE OUTPUT...8 4. APPROVALS.. 9 5. RELIABILITY......9 6. MECHANICAL SPECIFICATIONS......10 7. EXTERNAL CONTROLS...12 8. PLUG & PLAY..13 9. DISPLAY POWER MANAGEMENT.13 10.ATTACHMENTS TIMING...14 Page 3 of 15
1. ELECTRICAL PERFORMANCE All items must be performed under "standard test conditions" unless otherwise specified. 1.1 STANDARD TEST CONDITIONS -Warm up time: 30 minutes -AC supply voltage: 100 ~ 240 VAC universal -Ambient temperature: 25 C +/- 5 C -Humidity: 10 ~ 90 % -Display mode : 1680x1050/ 60Hz -Input signal (VGA): 0.7 Vpp -External controls for picture position and size : Preset condition -Video generator : Chroma 2135 or equivalent 1.2 LCD PANEL GENERAL SPECIFICATIONS -Model name : Au G220SW01_V0 -Screen diagonal : 22 inch -Display Area : 473.76(H) x 296.1(V)mm -Pixel Pitch: 0.282(H) x 0.282 (V) -Support Colors: 16.7M colors (R,G,B 6bit+HiFRC ) -Number of Pixel : 1680(R,G,Bx3)x1050 -Pixel Arrangement: RGB vertical stripe -Typical white luminance : 300 cd/m2 (Typ) @ 6.5mA -Contrast Ratio : 1000:1 -Viewing Angle : 89 (left), 89(right ), 89(up), 89(down) CR=10 -Signal Frequency : 30-82KHz -Frame rate: 60Hz typ, 75Hz max (1680x1050 @ 60Hz) -Response Time: 20ms typ.(tr + Tf) -Specifications are subject to change in different panel used Page 4 of 15
1.3 POWER SUPPLY 1.3.1 AC INPUT RANGE -Voltage: 100 ~ 230 VAC universal -Frequency: 60 / 50 Hz 1.3.2 POWER CONSUMPTION 50 W max. at the specified voltage and frequency 1.3.3 INRUSH CURRENT -Will not exceed 60Ap-p at 264V input for a cold start at 25 c 1.3.4 DC INPUT JACK -PIN (+12V, GND) (5.5φ x 2. 0 x 9. 5 plug) 1.4 PULL-IN RANGE OF SYNCHRONIZATION -Horizontal frequency: 30 KHz ~ 82 KHz -Vertical frequency: 50 Hz ~ 75 Hz 1.5 INPUT SIGNAL Page 5 of 15
2. PICTURE PERFORMANCE -Implies "standard test conditions" unless otherwise specified. -Values were measured after 10 minutes warm-up period. 2.1 NORMAL DISPLAY SIZE -H=473.76mm -V=296.10mm 2.2 PICTURE SIZE AND POSITION OFFSET H-size V-size 473.76mm 296.10mm H-offset V-offset a b < = 0. 5 mm c d < = 0. 5 mm Page 6 of 15
2.3 TILT AB-CD = Tilt on top < =0. 5 mm EF-GH = Tilt on bottom < = 0. 5 mm 2.4 DISPLAY QUALITY -A class / A grade Page 7 of 15
3. WHITE LUMINANCE Under standard test conditions 3.1 BRIGHTNESS LEVEL -Input full white pattern. More than 240 cd/m2 at center of screen with brightness and contrast at max. 3.2 BRIGHTNESS UNIFORMITY 376.320 x 301.056mm -White uniformity of these 5 points is defined as below. -( Min. brightness / Max. brightness ) x 100% >= 80% 3.3 COLOR TEMPERATURE -x= 0. 281 +/- 10% -y= 0. 311 +/- 10% -Test at 9300 K Preset -x= 0. 313 +/- 10% -y= 0. 329 +/- 10% -Test at 6500 K Preset 200 cd/m2 220 cd/m2 3.4 FOCUS -Light output setup: Pattern: full white Contrast: 50% Brightness: 200 cd/m2 -Test pattern: Chroma pattern 5 -Distance : 30cm away from screen -Clear and vision able shape Page 8 of 15
4. APPROVALS 4.1 EMI -FCC Class B -CE 4.2 ROHS -RoHS 5. RELIABILITY 5.1 Mini. operating hrs. - Monitor mini. operating hrs. (except LCD panel life hrs.) is 30000 hrs. 5.2 MTBF -Panel of lifetime is 50000 hrs.(min.) 5.3 AMBIANCE - Operating temperature: 5 ~ 35 C - Storage temperature: -20 ~ 60 C - Humidity: 10 ~ 90% Page 9 of 15
6. MECHANICAL SPECIFICATIONS 6.1 MAIN DIMENSIONS Without Packing -Width: 527.3 mm -Height: 353.5 mm -Depth: 69.89 mm 6.2 WEIGHT (REFERENCE) -Net: Kg -Gross: Kg 6.3 MATERIAL -METAL -The material for the front panel, back cover, is SECC Page 10 of 15
6.5 CONNECTOR -D-sub15 (VGA) -DVI-D 24-Pin 6.6 FORNT APPEARANCE See separate drawing of LK-VT-W22ONDW Page 11 of 15
7. EXTERNAL CONTROLS Front Controls : The Power key The Auto key The Up key The Down key The Menu key is power on/off. is Auto Tune and OSD Off is Adjust the volume and move select is Volume mute and move select is OSD On and Enter OSD Menu : Signal Select, Video, Audio, Color, Image, Language, Tools, Exit Page 12 of 15
8. PLUG & PLAY The Display Data Channel "DDC" function will allow the inform the host system about its identity and depending on the level of DDC used, communicate additional level of display capabilities. DDC1: One uni-directional data channel DDC2: One bi-directional data channel LK-VT-W22ONDW can support DDC 1 / 2 B 9. DISPLAY POWER MANAGEMENT 9.1 DEFINITION OF MODES There are three mode of operation for the LK-VT-W22ONDW. These are ON, STAND-BY/ SUSPEND and OFF ON : Both Horizontal and Vertical syncs are present and the monitor is in normal operation STAND-BY & SUSPEND : Horizontal or Vertical sync is inactive per VESA DPMS and all parts not operational. The monitor is able to perform a quick start when both Horizontal and Vertical signals are active again. OFF : Both Horizontal and Vertical sync are inactive per VESA DPMS and all parts of the monitor are disabled. This is the lowest possible power state of the monitor that maintains an automatic on when both the Horizontal and Vertical signals are active again. Recovery time will take longer than Stand-by / Suspend mode 9.2 POWER CONSUMPTION Normal operation: 50 W(max.) Stand-by/Suspend mode: < 3 W Off mode: < 3 W Page 13 of 15
10. ATTACHMENT Page 14 of 15
Vendor: Europe: Headquarter (North America): canvys canvys A Division of Richardson Electronics GmbH A Division of Richardson Electronics GmbH Raiffeisenstraße 5 40W267 Keslinger Road D-78166 Donaueschingen PO Box 393 LaFox IL 60147-0393 USA Internet: www.canvys.com Tel.: +49 (0) 771 83 00 0 Fax.: +49 (0) 771 83 00 80 VAT-No.: DE128240232 WEE-Reg.-Nr.: DE64678500 Page 15 of 15