Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that enable switching between dark-on and light-on operation. Response frequency as high as khz. Easy operation monitoring with bright light indicator. Wide operating voltage range: to VDC s in which the light indicator turns ON for dark-on operation are also available. A wide range of variations in eight different shapes. Flexible robot cable is provided as a standard feature. * Be sure to read Safety Precautions on page 8. *. Only the EE-SX6 Series has pre-wired models. *. models only. Ordering Information models Appearance Standard L-shaped T-shaped Closemounting Closemounting T-shaped, slot center: 0 mm Sensing method Throughbeam type (with slot) Connecting method Sensing distance Output configuration ( poles) mm (slot width) mode Infrared light NPN output PNP output /Light-ON light EE-SX60 EE-SX60P (selectable) * No incident light EE-SX60A EE-SX60R Light-ON light EE-SX0 EE-SX0P /Light-ON light EE-SX6 EE-SX6P (selectable) * No incident light EE-SX6A EE-SX6R Light-ON light EE-SX EE-SXP /Light-ON light EE-SX6 EE-SX6P (selectable) * No incident light EE-SX6A EE-SX6R Light-ON light EE-SX EE-SXP /Light-ON light EE-SX6 EE-SX6P (selectable) * No incident light EE-SX6A EE-SX6R Light-ON light EE-SX EE-SXP /Light-ON light EE-SX6 EE-SX6P (selectable) * No incident light EE-SX6A EE-SX6R Light-ON light EE-SX EE-SXP /Light-ON (selectable) * light EE-SX6 EE-SX6P F-shaped /Light-ON (selectable) * light EE-SX66 EE-SX66P R-shaped /Light-ON (selectable) * light EE-SX6 EE-SX6P *. These models can be used as Light-ON when the (+) are connected to each other. To use them as, do not connect these s to each other. When used at light-on, it is useful to select the connector EE-00-. The (+) of this connector are short-circuited in advance.
EE-SX/6 s and s with Junction s Appearance Standard L-shaped T-shaped, slot center: mm Closemounting Closemounting T-shaped, slot center: 0 mm F-shaped R-shaped Sensing method Output configuration Throughbeam type (with slot) Sensing distance / mm Light-ON (slot width) (selectable) * mode light Connecting method models ( m) connectors (0. m) models ( m) connectors (0. m) models ( m) connectors (0. m) models ( m) connectors (0. m) models ( m) connectors (0. m) models ( m) connectors (0. m) models ( m) connectors (0. m) models ( m) connectors (0. m) Infrared light NPN output PNP output EE-SX60- EE-SX60P- EE-SX60-CJ-R EE-SX60P-CJ-R EE-SX6- EE-SX6P- EE-SX6-CJ-R EE-SX6P-CJ-R EE-SX6- EE-SX6P- EE-SX6-CJ-R EE-SX6P-CJ-R EE-SX6- EE-SX6P- EE-SX6-CJ-R EE-SX6P-CJ-R EE-SX6- EE-SX6P- EE-SX6-CJ-R EE-SX6P-CJ-R EE-SX6- EE-SX6P- EE-SX6-CJ-R EE-SX6P-CJ-R EE-SX66- EE-SX66P- EE-SX66-CJ-R EE-SX66P-CJ-R EE-SX6- EE-SX6P- EE-SX6-CJ-R EE-SX6P-CJ-R * These models can be used as Light-ON when the L line and (+) line are connected to each other. To use them as, do not connect these lines to each other. Accessories for s with s (Order Separately) Type with Cable with Robot Cable Cable length EE-00 EE-00- EE-00 m EE-006 EE-00 m EE-006 EE-00 m EE-00-R m EE-00-R Hold-down Clip EE-006A For EE-006 only. Remarks (+) are already short-circuited. Accessories for s with Junction s (Order Separately) Type Cable length with Robot Cable m EE-06-R- For EE-SX6@-CJ-R. Remarks
EE-SX/6 Ratings and Specifications Type Standard L-shaped T-shaped, slot T-shaped, slot Close-mounting center: mm center: 0 mm F-shaped R-shaped EE-SX60 EE-SX60A EE-SX6 EE-SX6A EE-SX6 EE-SX6A EE-SX6 EE-SX6A EE-SX6 EE-SX6A EE-SX6 EE-SX66 EE-SX6 NPN models models EE-SX0 EE-SX60- EE-SX EE-SX6- EE-SX EE-SX6- EE-SX EE-SX6- EE-SX EE-SX6- EE-SX6- EE-SX66- EE-SX6- connectors EE-SX60- CJ-R EE-SX6- CJ-R EE-SX6- CJ-R EE-SX6- CJ-R EE-SX6- CJ-R EE-SX6- CJ-R EE-SX66- CJ-R EE-SX6- CJ-R EE-SX60P EE-SX60R EE-SX6P EE-SX6R EE-SX6P EE-SX6R EE-SX6P EE-SX6R EE-SX6P EE-SX6R EE-SX6P EE-SX66P EE-SX6P PNP models models EE-SX0P EE-SX60P- EE-SXP EE-SX6P- EE-SXP EE-SX6P- EE-SXP EE-SX6P- EE-SXP EE-SX6P- EE-SX6P- EE-SX66P- EE-SX6P- EE-SX60P- EE-SX6P- EE-SX6P- EE-SX6P- EE-SX6P- EE-SX6P- EE-SX66P- EE-SX6P- Item connectors CJ-R CJ-R CJ-R CJ-R CJ-R CJ-R CJ-R CJ-R Sensing distance mm (slot width) Sensing object Opaque: mm min. Differential distance 0.0 mm Light source GaAs infrared LED with a peak wavelength of 0 nm * Light indicator (turns ON when light is interrupted for models with A or R suffix) Supply voltage to VDC ±0%, ripple (p-p): 0% max. Current consumption ma max. (NPN models), 0 ma max. (PNP models) NPN open collector: to VDC, 00 ma max. 00 ma load current with a residual voltage of V max. Control output 0 ma load current with a residual voltage of 0. V max. PNP open collector: to VDC, 0 ma max. 0 ma load current with a residual voltage of. V max. Response frequency * khz min. ( khz average) Ambient illumination,000 lx max. with fluorescent light on the surface of the receiver. Ambient temperature range Operating: to + C, Storage: 0 to +80 C Ambient humidity range Operating: % to 8%, Storage: % to % Vibration resistance Destruction: 0 to,000 Hz (peak acceleration: 00 m/s ).-mm double amplitude for h (-min periods) each in X, Y, and Z directions Shock resistance Destruction: 00 m/s for times each in X, Y, and Z directions Enclosure rating IEC60 IP0 Connecting method Special connectors (direct soldering possible), models (Standard cable length: m), connectors (Standard cable length: 0. m) Approx.. g Approx. g Approx.. g Approx.. g Approx. g Approx.. g Approx.. g Approx.. g Weight Approx. 8. g Approx.. g Approx..8 g Approx. 6.8 g Approx.. g Approx. 8. g Approx. 6. g Approx. 6. g models (packaged) s with junction connectors Approx. 6. g Approx.. g Approx.. g Approx.. g Approx.. g Approx.. g Approx.. g Approx.. g Material Case Polybutylene phthalate (PBT) Cover emitter/receiver Polycarbonate *. The indicator is a GaP red LED (peak wavelength: 60 nm). *. The response frequency was measured by detecting the rotating disk shown at the right. Disk for the EE-SX6 with Junction Product with Robot Cable EE-06-R- mm. mm mm t = 0. mm.8 8 0 000 6 Appearance Item Contact resistance mω max.(at 0 ma DC and 0 mv max.) Insertion strength 0 N max. Surplus strength (housing holding strength) N min. Cable length m Ambient temperature range to 8 C Materials Housing Nylon Contact Phosphor bronze 0 Brown L Pink Blue OUT Black Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m 6
Engineering Data (Typical) EE-SX/6 Sensing Position Characteristics Sensing Position Characteristics Repeated Sensing Position Characteristics Tr ON Tr ON Output level transistor d d d d d d d d ON Ta = C Ta = C Ta = C Tr 0.0.0.0.0.0 6.0 I/O Circuit Diagrams Distance d (mm) Tr 0.0.0.0.0.0 6.0 Distance d (mm) 0.00.0.0.06.08 Distance d (mm) Vcc = V, No. of repetitions: 0, d = 0.00 mm, d = 0.00 mm, d = 0.00 mm, d = 0.0 mm, d = 0.0 mm NPN Output Output configuration Timing chart Terminal connection Output circuit EE-SX6@ EE-SX6@- EE-SX6@-CJ-R Light-ON transistor transistor Short-circuited between Open between Light indicator Main circuit L Load OUT IC (Control output) 00 ma max. to VDC EE-SX60A EE-SX6A EE-SX6A EE-SX6A EE-SX6A Light-ON transistor transistor Short-circuited between Open between EE-SX0 EE-SX EE-SX EE-SX EE-SX transistor Light-ON --- Light indicator Main circuit OUT IC Load to VDC
EE-SX/6 PNP Output Output configuration Timing chart Terminal connection Output circuit EE-SX6@P EE-SX6@P- EE-SX6@P-CJ-R Light-ON transistor transistor Short-circuited between Open between Light indicator Main circuit L OUT IC Load to VDC EE-SX60R EE-SX6R EE-SX6R EE-SX6R EE-SX6R Light-ON transistor transistor Short-circuited between Open between EE-SX0P EE-SXP EE-SXP EE-SXP EE-SXP transistor Light-ON --- Light indicator Main circuit OUT IC Load to VDC Safety Precautions Refer to Warranty and Limitations of Liability. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Safe Use Operating Environment These Photomicrosensors have an IP0 (conforms to IEC60) enclosure and do not have a water-proof or dust-proof structure. Therefore, do not use them in applications in which the sensor will be subjected to splashes from water, oil, or any other liquid. Liquid entering the Sensor may result in malfunction. Precautions for Correct Use Make sure that this product is used within the rated ambient environment conditions. Installation When direct soldering to the s, use the following guidelines. Soldering Conditions Item Soldering iron Temperature 0 C max. Permissible time s max. Remarks The portion between the base of the s and the position. mm from the base must not be soldered. The base uses a polycarbonate resin, which could be deformed by excessive soldering heat, resulting in damage to the product's functionality. Lot Numbers and s EE-SX@0@ In the right illustration, 6d number indicates the lot number and factory where the product was EE-SX60 manufactured. Do not include this code with the model number when 6d ordering. Lot number and factory code 8
EE-SX/6 Dimensions (Unit: mm) Sensors EE-SX60/60P EE-SX60A/60R EE-SX0/0P () Vcc () L L* () OUT OUTPUT () GND (0 V) EE-SX6/6P EE-SX6A/6R EE-SX/P () Vcc () L L* () OUT OUTPUT () GND (0 V) * L Terminal needs no connection for all EE-SX@ series sensors. * L Terminal needs no connection for all EE-SX@ series sensors. 6.. Two,. dia. holes.. 6. Four, R Four, R. 6. Optical axis 8...8... Four, R.8 Two,.8 dia. holes 6. 0. 0. 6. 8...8.6... Two,. dia. holes 6. 0.. 0. 6. 6... EE-SX6/6P EE-SX6A/6R EE-SX/P () Vcc () L L* () OUT OUTPUT () GND (0 V) EE-SX6/6P EE-SX6A/6R EE-SX/P () Vcc () L L* () OUT OUTPUT () GND (0 V) * L Terminal needs no connection for all EE-SX@ series sensors. * L Terminal needs no connection for all EE-SX@ series sensors.. 6 6..6.8 6.. (6.6) Two, R Two,. dia. holes.. 6. Four, R. 0. 0. Four, R.6. 6.. 6. 8..8.. 6...8..8 6... 0. 0.
EE-SX/6 EE-SX6/6P EE-SX6A/6R EE-SX/P () Vcc () L L* () OUT OUTPUT () GND (0 V) EE-SX6/6P () Vcc () L L () OUT OUTPUT () GND (0 V) * L Terminal needs no connection for all EE-SX@ series sensors. 6. Two, R Two,. dia. holes 6. 6. 6. 0.8 6. (.) (.) 6...6. 0. 0..6. 6. 6 (R) 0.. 0. Detection. (R).. 8...8 6... 6. EE-SX66/66P EE-SX6/6P () Vcc () L L () OUT OUTPUT () GND (0 V) () Vcc () L L () OUT OUTPUT () GND (0 V)..... 6.. 6. Detection... 8..6 Detection.6. 8... 6..8.. 6..8. Two,. dia. holes 0. 0. 0. 0. Two,. dia. holes. 0
EE-SX/6 EE-SX60-/60P- EE-SX60-CJ-R/60P-CJ-R EE-SX6-/6P- EE-SX6-CJ-R/6P-CJ-R Pink () L Blue () GND (0 V) Black () OUTPUT Pink () L Blue () GND (0 V) Black () OUTPUT 6. R... R. 6. 6.... 6. 8.... dia. holes.8 6. 00± EE-SX60-CJ-R Detection R.. 8. 00± EE-SX6-CJ-R Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m 6. Detection....6 dia. holes.8 6..6 dia. holes.8 dia. holes Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m.6.. dia. holes EE-SX6-/6P- EE-SX6-CJ-R/6P-CJ-R EE-SX6-/6P- EE-SX6-CJ-R/6P-CJ-R Pink () L Blue () GND (0 V) Black () OUTPUT Pink () L Blue () GND (0 V) Black () OUTPUT.. 00±..6 6..8. (6.6).. 00± 6. Detection 0..6 dia. holes 6. 6 EE-SX6-CJ-R.. R.6 R 6. 8.. Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m. Optical axis. 6. 8. R.8..6 dia. holes. dia. holes Detection dia. holes Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m EE-SX6-CJ-R
EE-SX/6 EE-SX6-/6P- EE-SX6-CJ-R/6P-CJ-R Pink () L Blue () GND (0 V) Black () OUTPUT EE-SX6-/6P- EE-SX6-CJ-R/6P-CJ-R Pink () L Blue () GND (0 V) Black () OUTPUT.. dia. holes Optical axis (.).6 R 6.. Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m.6 dia. holes Detection. EE-SX6-CJ-R. 00±. 6. (R) (R).. EE-SX6-CJ-R 0.. 00± Detection 6. 8...6 dia. holes. 0 6. 6 6..8.6 Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m. 6. EE-SX66-/66P- EE-SX66-CJ-R/66P-CJ-R Pink () L Blue () GND (0 V) Black () OUTPUT EE-SX6-/6P- EE-SX6-CJ-R/6P-CJ-R Pink () L Blue () GND (0 V) Black () OUTPUT.... 00±. Optical axis.. EE-SX66-CJ-R. 6. 00± Detection. 6. EE-SX6-CJ-R Detection... 8...6 dia. holes 6... dia. holes Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m.6 dia. holes.. dia. holes 6. 8.. Robot cable with.8 dia., conductors, (conductor cross-section: 0. mm, insulator diameter: mm); Standard length: m
EE-SX/6 EE-SX/6 Hold-down Clips EE-00. ±0. (short-circuited between (+) and L s) EE-00-.. 6 6 ±0.. ±..8 ±0.. ±0...6. ±0. with Cable EE-006..8. Hold-down Clip EE-006A. 0.....6 R Four, R.6. 6.... 0 (R) 000 () Brown () L Pink () OUT Black () Blue Cable: Vinyl-insulated round cable of dia., cores, (0. mm with.-dia. insulator) Materials: Stainless steel with Cable EE-00 with Robot Cable EE-00-R.6.. Two, C.. EE-00 EE-00 cable EE-00-R cable: Vinyl-insulated round cable of dia., cores, (0. mm with.-dia. insulator) 0 ± 000 Two, C.. ±......6 () Brown () L Pink () OUT Black () Blue ± In the interest of product improvement, specifications are subject to change without notice.