INTEGRATED RECEPTION SYSTEMS w w w.w h y t e t e c h n o l o g i e s.c o m.
About Whyte Technologies Whyte Technologies is a leader in the research, design and manufacture of TV and Satellite Distribution products. Our roots lie firmly in field of signal analysis and the research and design of signal processing systems. We develop industry leading products that are reliable, robust and compact. At the same time our products are extremely cost effective whilst ease of installation provides further reduction in costs. At Whyte technologies we believe in higher quality and better value. Firmly etched in our organisations culture is the practise of Kaizen -Japanese for the philosophy of continuous improvement. Research Design Manufacture Kaizen Research Through ground level research we understand the challenges faced by installation engineers in the TV & satellite distribution system industry. Installation engineers require products that adapt to simple and complex installations that are easy to install and convenient to service. Real life on site scenarios differ to in house system designs; hence flexibility is needed. Design Through cutting edge design and innovation our R&D team address these issues. We challenge conventional standard practise and implement our visions into new and innovative quality products. Manufacture We don t just manufacture products that work. We are committed to quality and reliability. Central to achieving this is Whyte Technologies Quality Controlled Manufacturing System. This system reflects the uniform manner in which we apply our ethos and core beliefs to our manufacturing process which extends from procurement of components right through to the final products assembled in our factory. Kaizen The philosophy of continuous improvement; quite simply the way in which we maintain the lead in the technological development and manufacture of TV and Satellite Distribution Equipment.
TAPS & SPLITTERS WT51-10 - WT51-20 - WT52-10 - WT52-20 - WS52-05 Whyte Series 5 Taps & Splitters are a range of 5 way passive devices that distribute IF and Terrestrial Signals. The range includes 1 way and 2 way Taps with either a 10dB or 20dB tap off and a 2 way Splitter with 2 x 4dB tap offs. For ease of installation each Tap comes complete with a set of colour coded 450mm F-type leads which enables the Multiswitches to be positioned either side of the tap and to be orientated vertically or horizontally depending on available space. The Tap outputs are located on the top of the unit to make installation and servicing easier. The Whyte Series 5 Taps and Splitter are DC passing through all IF Trunk Lines. The HL and HH Tap Lines are DC passing whilst the VL, VH and Terrestrial Tap Lines are isolated. An Auxiliary 18V Input is provided on all Taps and Splitters which enables a Whyte PSU unit to be conveniently connected anywhere on the system. A combination of Taps and Splitters can be coupled together to create a multitude of 5 wire splitters with any number of outputs. All inputs and outputs are colour coded and a green LED power indicator is provided for ease of installation and servicing. All Whyte products have inbuilt LTE filters to reject 4G interference. Model WT51-10 WT51-20 WT52-10 WT52-20 WS52-05 Frequency Satellite 950-2150MHz 950-2150MHz 950-2150MHz 950-2150MHz 950-2150MHz Terrestrial 47-790MHz 47-790MHz 47-790MHz 47-790MHz 47-790MHz Inputs (F-Type Connector) 4 SAT + 1 TERR 4 SAT + 1 TERR 4 SAT + 1 TERR 4 SAT + 1 TERR 4 SAT + 1 TERR Outputs (F-Type Connector) 2 x 4 SAT+ 2 x 4 SAT+ 3 x 4 SAT+ 3 x 4 SAT+ 2 x 4 SAT+ 2 x 1 TERR 2 x 1 TERR 3 x 1 TERR 3 x 1 TERR 2 x 1 TERR DC Pass Trunk SAT Yes Yes Yes Yes - TERR No No No No - DC Pass Trunk SAT HH & HL HH & HL HH & HL HH & HL HH & HL to Tap TERR No No No No No Insertion Loss SAT 2±2dB 2±2dB 3±2dB 3±2dB - Trunk TERR 2±2dB 2±2dB 2±2dB 2±2dB - Insertion Loss SAT 10±2dB 20±2dB 10±2dB 20±2dB 4±2dB Taps TERR 10±2dB 20±2dB 10±2dB 20±2dB 4±2dB Fixed Slope Taps SAT 4dB 4dB 4dB 4dB 4dB Trunk Max Current Pass (per line) 2A 2A 2A 2A 2A Dimension 164x136x50 164x136x50 164x136x50 164x136x50 164x136x50 Weight 350g 350g 385g 385g 350g
MULTISWITCHES WM508 - WM512 - WM516 - WM524 - WM532 The Whyte Series 5 Multiswitch range is designed to be universally flexible and can be used in small, medium and large Integrated Reception Systems (IRS). Whyte Multiswitches can be used as a standalone Multiswitch when powered directly via the 18V Auxiliary Input by using the Whyte 1A Power Supply Unit (model WPSU- 1A sold separately). Whyte Series 5 Multiswitches can also be line powered to create large IRS Systems when used in conjunction with Launch Amplifiers, Taps and Splitters from the Whyte Series 5 range. The Multiswitches have been designed for ease of installation. The subscriber ports come pre-fitted with removable Earth Terminal Bars and are orientated single file. The Multiswitch has adequate stand-off to provide finger space for easy termination and servicing. A 10dB Gain control is provided to enable calibration of all Satellite IF and Terrestrial inputs. All the inputs are colour coded and a green LED power indicator is provided for ease of installation and servicing. All Whyte products have inbuilt LTE filters to reject 4G interference. Model WM508 WM512 WM516 WM524 WS532 Frequency Satellite 950-2150MHz 950-2150MHz 950-2150MHz 950-2150MHz 950-2150MHz Terrestrial 47-790MHz 47-790MHz 47-790MHz 47-790MHz 47-790MHz Inputs (F-Type Connector) 4 SAT + 1 TERR 4 SAT + 1 TERR 4 SAT + 1 TERR 4 SAT + 1 TERR 4 SAT + 1 TERR Outputs (F-Type Connector) 8 Tap Outputs 12 Tap Outputs 16 Tap Outputs 24 Tap Outputs 32Tap Outputs Gain Tap SAT 8db 7db 7db 6db 5db Tap TERR 10db 5db 5db 9db 8db Gain Control Tap SAT 11±2dB 11±2dB 11±2dB 11±2dB 11±2dB Tap TERR 11±2dB 11±2dB 11±2dB 11±2dB 11±2dB Trunk - Trunk 28dB 28db 28db 28db 28db Isolation Cross Polar 25db 25db 25db 25db 25db Tap-Tap Sat 25db 25db 25db 25db 25db Tap-Tap Terr 23db 23db 23db 23db 23db Rejection 20db 20db 20db 20db 20db Output Level SAT (IMA 3 35db) 100dBµv 100dBµv 100dBµv 100dBµv 100dBµv TERR (IMA 3 60db) 90dBµv 90dBµv 90dBµv 90dBµv 90dBµv Switching Voltage 15±0.8V 15±0.8V 15±0.8V 15±0.8V 15±0.8V Trunk Max Current Pass (per line) 2A 2A 2A 2A 2A Switching Commands 13V-18V 13V-18V 13V-18V 13V-18V 13V-18V 13V22k-18V22K 13V22k-18V22K 13V22k-18V22K 13V22k-18V22K 13V22k-18V22K Current Consumption 180mA max 180mA max 180mA max 200mA max 200mA max Dimension 157x138x43 157x202x43 157x202x43 157x266x43 157x330x43 Weight 510g 685g 700g 900g 1080g
POWER SUPPLIES & ACCESSORIES 1A Power Supply Unit WPSU-1A > 1A 18V Power Supply Unit > Suitable for single multiswitches or small IRS Systems > 80cm mains lead with UK plug > 120cm DC lead with F connector > Fixing tags suitable for wall mounting > Power can be inserted on any Series 5 Multiswitches, Taps and Amplifiers where mains is located nearby 2.2A Power Supply Unit WPSU-2.2A > 2.2A 18V Power Supply Unit > Suitable for medium to large IRS Systems > 80cm mains lead and UK plug > 120cm DC lead with F connector > Fixing tags suitable for wall mounting > Power can be inserted on any Series 5 Multiswitches, Taps and Amplifiers where mains is located nearby 5 Wire Tap & Trunk Leads WTL-5X45 > 5 colour coded F connector leads per pack > All leads 450mm Length > Handy for connecting taps to multiswitch > Can be used as trunk leads between taps > High quality cable and F connectors > Max Attenuation @ 790MHz = 0.53dB max > Max Attenuation @ 2150MHz = 1.15dB max
Example of an Integrated Reception System Layout Example Integrated Reception System Layout WPSU-2.2A 2.2A PSU WATS-522 Launch Amp WT52-20 20db 2Way Tap WM516 5x16 Multiswitch WM512 5x12 Multiswitch WT52-20 20db 2Way Tap WM524 5x24 Multiswitch WT51-10 10db 1Way Tap WM508 5x8 Multiswitch WT52-10 10db 2Way Tap
Example of Small IRS System Layouts Example Small IRS System Layout WPSU-1A 1A PSU WAS-515 Launch Amp WS52-05 2Way Splitter Example Standalone Multiswitch IRS System Layout WPSU-1A 1A PSU w w w.w h y t e t e c h n o l o g i e s.c o m.