KUZMA LTD Hotemaze 17a, 4205 PREDDVOR SLOVENIA RETAIL SUGGESTED PRICE LIST 2017/2 Actual prices will depends on tax, import duties and shipping costs in different countries. Valid from July 1, 2017 Prices in EUR including sale tax per item: 1. Tonearms: Each tonearm is supplied with accessory kit. Standard wiring: Copper wiring if not marked otherwise ( Cardas), Bullet copper RCA or standard Neutrik XLR Silver wiring (Crystal Cable), Bullet silver RCA or standard Neutrik XLR All tonearms have balanced wiring so replacing RCA's for balanced connectors is possible. Ask for non standard wiring or length : Kondo, Cardas Clear, Crystal cable Mono X,.. Stogi S no S armbase 1220 EUR Stogi S 5pin no cable 1090 EUR Stogi S silver w. 1890 EUR Armbase S Stogi S 12 with armbase S 1570 EUR Stogi S 12 VTA no armbase Kuzma 2240 EUR Stogi S 12 VTA 5Pin no armbase Kuzma & no cable 2080 EUR Armbase Kuzma 385 EUR Stogi 1980 EUR Stogi 5pin no cable 1790 EUR Stogi Ref 2910 EUR Stogi Ref 5pin no cable 2720 EUR Stogi Ref 313 12 inch tonearm 3290 EUR Stogi Ref 313 5pin 3100 EUR Stogi Ref 313VTA 12 tonearm fits on 9 position 3940 EUR Stogi Ref 313VTA 5pin no cable 3720 EUR Stogi Ref 313VTA silver w. 4770 EUR 4Point 9 3580 EUR 4Point Silver wiring as standard: 4Point single 11,3 fits on 9 position 5700 EUR 4Point biwire-rca box 6000 EUR 4Point 5pin no cable 5610 EUR 4Point 14 single 14 tonearm fits on 12 position 8200 EUR 4Point 14 5pin no cable 8200 EUR Air Line Silver wiring & air supply as standard Air Line tangential 9 tonearm 9730 EUR Air Line 5 pin DIN 9550 EUR Air Line RCA female box 9920 EUR Air Line no air supply 7680 EUR
2. Turntables: Specify finish where applicable, mains voltage and frequency and tonearm cut. Each turntable is supplied with accessory kit. Stabi S: Standard finish is brass, black as optional.standard turntable accepts Kuzma tonearms and is supplied with lid but without clamp and power supply( PS) or wooden support. For other tonearms you need extra Stabi S armboard and specify arm cutout. Stabi S 1820 EUR Stabi S PS 3300 EUR Stabi S12 inch no lid 1820 EUR Stabi S D no lid- for two tonearms 2270 EUR Stabi S12 D12 inch no lid- for two 12 inch arms 2590 EUR Stabi S armboard specify cutout 260 EUR Stabi S no lid 1660 EUR Stabi Ref: Standard finish is black. Standard turntable is supplied with clamp, PS AC, strobe disc and cutout for Kuzma tonearms. For other tonearms specify cutout. Stabi Ref 2 9050 EUR Stabi Ref armboard specify tonearm cutout 510 EUR Stabi M: Standard finish is black. Turntable is supplied with clamp, PS DC, strobe disc and cutout for Kuzma tonearms. Special finishes for front and side panels available on request. Stabi M standard with lid 16000 EUR Stabi M armboard specify tonearm cutout 1120 EUR Stabi XL DC: Standard finish is brass, black is optional. Turntable is supplied with clamp, PS DC and cutout for Kuzma tonearm with one VTA tonearm tower ( No.1). For other tonearms specify cutout. No.3 tower has no VTA adjustment. Stabi XL DC with one VTA tower ( No.1) 26300 EUR Stabi XL DC with one tower (No.3) 25300 EUR Stabi XL DC kit for XL,XL2, XL4 8960 EUR Stabi XL armboard specify tonearm cutout 960 EUR 3. MC Cartridges: CAR-20 CAR 20H NEW: 2 mv output CAR-30 CAR-40 CAR-50 CAR-60- NEW: diamond cantilever Rettiping upon return broken cartridge 1900 EUR 2400 EUR 5400 EUR 12700 EUR -20% of new cartridge
4. Tonearms accessories and spare parts: Tonearms general: Repair Geometry protractor-standard Armrest- tonearms Cueing device Cartridge balast plate aluminium 2.5 gr SME-Kuzma adaptor Cartridge container -quad ( 4 x headshells) Cartridge container- single( 1x headshell) Stogi S& 12: Stogi S mount base for other turntables Stogi S fingerlift Stogi S silicone oil Stogi S counterweight Stogi S thin counterweight 195 EUR/ per hour 60 EUR 60 EUR 120 EUR 400 EUR 750 EUR 300 EUR 20 EUR 36 EUR 105 EUR Stogi & Stogi Ref: Stogi, Stogi Ref armbase 180 EUR Stogi Ref extra heavy ring-weight-3 sizes 130 EUR (30g/44mm,63g/48mm, 129g/56mm/) Stogi Ref lighter counterweight :-10 g 200 EUR ( 152g) Stogi&Stogi Ref standard counterweight 150 EUR ( 162g) Stogi Ref 313VTA & 313: Stogi Ref 313 VTA headshell Stogi Ref 313VTA& 313 kuzma armbase Stogi Ref 313 VTA&313 extra heavy weight-ring 380 EUR ( marked with one dot) 385 EUR 150 EUR 4 Point: 4 Point headshell 380 EUR ( no dot) 4 Point armbase Kuzma armbase 385 EUR 4 Point silicone damping oil 36 EUR 4 Point 14 inch kit ( for standard 4Point single) 4960 EUR 4 Point 14 headshell 380 EUR ( marked with two dots) Air Line: Air Line Zero switch 580 EUR Air Line counterweight-lighter 200 EUR Air Line air supply tube 1m 8 EUR Air Line Damping kit 580 EUR Air dryer ( silver filters ) 400 EUR Air Line arm base Kuzma armbase 385 EUR Compressor 2000 EUR Compressor oil 0.5 l Damping oil 36 EUR Tonearm's cabling: 5 pin DIN cable * 1.5m RCA or XLR 950 EUR 5 pin DIN silver 1.5m RCA or XLR 1500 EUR 5pin DIN Cardas Clear 1.5m RCA or XLR 2750 EUR 5pin DIN Kondo 1.5m RCA or XLR 3450 EUR Interconnects: Interconnect standard* 1 m RCA- RCA 950 EUR Interconnect silver 1 m RCA- RCA 1390 EUR
Extra length tonearm wire: +0.5 m Cardas 360 EUR +0.5 m silver 540 EUR +0.5 m Mono X CC 1400 EUR 5. Turntables accessories and spare parts: Turntables- general: Belt flat (Stabi S, Stabi, Stabi Ref, Stabi XL) 100 EUR Belt round (Stabi before 1994) 48 EUR Stabi, Stabi Ref or Stabi S PVC bottle bearing oil 24 EUR Mat 1 AC Motor with pulley- all turntables-but specify model! 385 EUR Stabi S: Power supply (PS AC kit) specify Hz output for US 1480 EUR Stabi SD 9 adapter kit specify second tonearm 500 EUR Stabi SD 12 inch adapter kit specify second tonearm 500 EUR Stabi S 9 kit main beam with bearing hole 500 EUR Stabi S 12 kit main beam with bearing hole 500 EUR Stabi S armboard standard cut ( Kuzma, SME, Graham) 260 EUR Stabi S armboard specify cutout 380 EUR Stabi S platter kit 540 EUR Stabi S wooden platform 19 mm 170 EUR Stabi S maple natural finish platform 40mm 330 EUR Stabi S clamp Rega RB 300 adapter mount for Stabi S 80 EUR Stabi Ref: Stabi Ref armboard standard cut ( Kuzma, SME, Graham) 510 EUR Stabi Ref armboard specify cutout 650 EUR Power supply ( PS AC) specify mains voltage 1480 EUR Stabi M: Stabi M armboard standard cut ( Kuzma, SME, Graham) 960 EUR Stabi M armboard specify cutout 1120 EUR Belt M blue ( it is not the same size for XL DC) 130 EUR Remote control 360 EUR Optional finish extra: Repainting existing front and side panels ( 4-8 weeks) 2200 EUR RAL colour: front& side panels ( 4-8 weeks ) Brass transparent lacquer: front & side panels( 4-8 weeks) 3600 EUR Wood : front& side panels ( 4-8 weeks) 2900 EUR Stabi XL DC: Stabi XL tower No.1 with VTA 4000 EUR Stabi XL tower No.3 no VTA 2600 EUR PS DC 3000 EUR Stabi XL armboard standard cut ( Kuzma, SME, Graham) 800 EUR Stabi XL armboard specify tonearm cutout 960 EUR Belt XL DC blue ( it is bigger then Stabi M belt) 130 EUR Stabi XL oil PVC bottle 0.05l 70 EUR
Stabi :( 1985-2005) spare parts available Silicone damping oil Round belt Clamp Modification to flat belt (ask for details) 45 EUR 180 EUR 350-950 EUR 6. Various products: Ebony clamp Antistatic LP sleeves 1 box ( 50pcs) Made in China RD ultrasonic cleaner LP kit RD spare stand Strobo disc ( supplied with Stabi Ref2 and XL DC ) Outer clamp ( ring) for Stabi M and Stabi XL Outer clamp- Light for Stabi ref and Stabi S SME 30 round armboard to fit Kuzma tonearms Not exlusive Kuzma product: ZEROVIBE 6050P 770 EUR 55 EUR 1200 EUR 700 EUR 45 EUR 1250 EUR 1250 EUR 900 EUR 14900 EUR Please contact distributor in your country. If it is not appointed then contact us. See our web site. We reserved the right to change prices prior to any notice! This price list might contain print errors. Januar, 2017 Kuzma Ltd, Slovenia Phone: +386 4 25 35 450, Fax: +386 4 25 35 454, E mail: kuzmaltd@siol.net, www.kuzma.si