Magnetic Integrated Connector Modules. (MIC) (2013-r1) E & E Magnetic Products Limited. Magnetic Integrated Connector Modules

Similar documents
1/F.,Harbour View,No.12 Science Park East Avenue, Phase Ⅱ,Hong Kong Science Park,Shatin,N.T.,HK

Electrical 25 C Operating Temperature 0 C to +70 C TX RX L/R. RJ45 Durability Testing Rating

PulseJack 1xN Tab-Down

ECN of Alden Road, Units 7 &8,Markham, Ontario Canada L3R 3W7 Tel: Fax:

Lead free and RoHS package. High reduction of parasitic elements through integration Complies with IEC level 4 standards:

ECMF4-20A42N10. Common mode filter with ESD protection for high speed serial interface. Features. Applications. Description

TGC2610-SM 10 GHz 15.4 GHz Downconverter

APPLIANCES /// MTA, CST-100 II AND SL-156 CONNECTORS. CONNECTORS/ APPLIANCES MTA, CST-100 II and SL-156 Connectors

Obsolete Product(s) - Obsolete Product(s)

HD1-DX HDMI Extender

GaAs MMIC High Dynamic Range Mixer

BAL-NRF01D3. 50 ohm balun transformer for 2G45 ISM matched Nordic s chipset: nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch. Features.

HD1-LX HDMI & IR Extender

Features. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

MICROLITHIC DOUBLE-BALANCED MIXER

Horizontal or Vertical PCB contacts Bulk Packaging LED colour - Red, Green, Yellow or Blue combinations. Ordering Codes

LAVI-U252VH+ Performance Charts. LO=+18dBm LO=+21dBm LO=+24dBm. LO=+18dBm LO=+21dBm LO=+24dBm. LO=+18dBm LO=+21dBm LO=+24dBm

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units

Features low conversion loss, 6.79 db typ. wideband, 1 to 1000 MHz. Applications HF/VHF/UHF cellular federal & defense communications

Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)

MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors. NOT the LATEST REVISION

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A

DIN EUROCARD CONNECTORS

RF V W-CDMA BAND 2 LINEAR PA MODULE

MICROLITHIC DOUBLE-BALANCED MIXER

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units

USBLC6-4SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

RF2360 LINEAR GENERAL PURPOSE AMPLIFIER

3M Pak 10 Socket 1 mm Straight and Right Angle, Surface Mount PK10 Series

MICROLITHIC DOUBLE-BALANCED MIXER

Obsolete Product(s) - Obsolete Product(s)

Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)

USBLC6-2SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

MaxiBridge mm Connectors. Ed Full-scale MaxiBridge 8 Pins Catalog E

MICROLITHIC DOUBLE-BALANCED MIXER

HMC576LC3B MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)

ADE-R3GLH+ CONVERSION LOSS 50. ISOLATION (db) 10 LO= +7 dbm LO= +10 dbm LO=+13 dbm FREQUENCY (MHz) RF VSWR

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A

= +25 C, IF= 100 MHz, LO = +17 dbm*

DATA SHEET. Two (2) fibers Detachable DisplayPort 1.2 Extender, DPFX-200-TR

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED MIXER

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

CATEGORY 6 CABLING SOLUTIONS

3M MetPak 2-FB Header

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

= +25 C, IF= 100 MHz, LO = +15 dbm*

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

General purpose low noise wideband amplifier for frequencies between DC and 750 MHz

MICROLITHIC DOUBLE-BALANCED MIXER

MICROLITHIC DOUBLE-BALANCED I/Q MIXER

GbE SFP CWDM Transceiver (120km) RCP12SVX

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

QPC6222SR GENERAL PURPOSE DPDT TRANSFER SWITCH. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information

Features. = +25 C, IF = 1 GHz, LO = +13 dbm*

Parameter Min. Typ. Max. Min. Typ. Max. Units

TGC4546-SM GHz Upconverter with Quadrupler

SKY LF: GHz 4x2 Switch Matrix with Tone/Voltage Decoder

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz

DATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram

GaAs MMIC High Dynamic Range Mixer

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

DATA SHEET. Two (2) fibers Detachable HDMI 2.0 Extender,

Features low conversion loss, 6.11 db typ. excellent L-R isolation, 44 db typ. CONVERSION LOSS (db) Mid-Band m. Range f L. Conversion Loss (db)

TGA2807-SM TGA2807. CATV Ultra Linear Gain Amplifier. Applications. Ordering Information. CATV EDGE QAM Cards CMTS Equipment

TB806AUX Class E A / Cat.6A UTP Keystone Jack (Auto press-fit)

Not recommended for new designs

TGP2108-SM 2.5-4GHz 6-Bit Digital Phase Shifter

General purpose low noise wideband amplifier for frequencies between DC and 750 MHz

Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units

GaAs MMIC Triple Balanced Mixer

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

Features. Parameter Min. Typ. Max. Units

MICROLITHIC DOUBLE-BALANCED MIXER

OC-48/STM-16 Bi-directional SFP Transceiver (40km) RBT25SI2

MICROLITHIC DOUBLE-BALANCED I/Q MIXER

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description

Obsolete Product(s) - Obsolete Product(s)

HMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description

DSM Series Ultra Thin Surface Mount Single Digit 7-Segment LED Display

DATA SHEET. BGY885B 860 MHz, 20 db gain push-pull amplifier DISCRETE SEMICONDUCTORS. Product specification Supersedes data of 1997 Apr 07.

TGC2510-SM. Ku-Band Upconverter. Product Description. Product Features. Function Block Diagram. Ordering Information. Applications

HSME-C400. Data Sheet. Side-Fire Mono-Color Surface-Mount ChipLED. Features. Description. Applications

Features low conversion loss, 5.94 db typ. aqueous washable J-leads for strain relief. CONVERSION LOSS (db) Mid-Band m. Range f L.

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

0.3 mm Pitch, 1.5 mm Mated Height, Board- to-fine Coaxial Cable Connectors

DATA SHEET. Two (2) fibers Detachable DisplayPort Extender, DPFX-100-TR

MICROLITHIC DOUBLE-BALANCED I/Q MIXER

TGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information

Agilent HSMx-C265 Surface Mount Chip LEDs Data Sheet

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

DATASHEET ISL Features. Ordering Information. Applications. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier

Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units

SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT

Product Specification PE613050

Transcription:

Magnetic Integrated Connector Modules (MIC) (0-r) INTRODUCTION E & E Magnetic Products Limited E & E Magnetic Products Limited (EEMPL) has been positioned as a major supplier of high quality magnetic related products. With the worldwide presence of our engineering teams, we design and manufacture a wide range of products such as magnetic components, magnetic integrated connectors and electronic modules. Products are widely used in telecommunications, networking, computing, industrial, automotive and consumer electronic applications. As one of our key factors to success, EEMPL has established a far-reaching sales and marketing network which well covers our customers located worldwide. In addition to our sales representatives and distributors, we have direct sales support offices in USA, Canada, Europe, Singapore, Taiwan, Hong Kong and China. In order to fulfill our mission of providing the best value to our customers, EEMPL is committed to develop cutting-edge technology with our high-tech business partners, uphold stringent product quality and compliances with international industrial standards, provide on time deliveries and offer our products at most competitive pricings. Magnetic Integrated Connector Modules In order to support the ever-growing needs of smaller size, lower electro-magnetic noise components, innovative, customer-oriented product series - Magnetic Integrated Connector Modules (MIC) are developed. Magnetic Integrated Connector Modules (MIC) are introduced in order to support the ever-growing needs of smaller size, higher quality, less electromagnetic noise components. Indirect benefits also include saving in PCB real estate and reducing in component-count, which result in better end-product design flexibility and cost control. A wide range of IEEE 80. complied MIC for LAN, Telecom and other applications are offered. Hundreds of MIC packages in various platforms, ranged from single port up to X8 ports and different chip side footprint pattern are readily available.

Table of Content Magnetic Integrated Connector Modules IC CROSS REFERENCE SELECTION GUIDE GENERAL INFORMATION / REFERENCE DOC# PAGE MIC-IC MIC-SG DATA SHEETS 000 BASE-T APPLICATIONS SINGLE PORT THROUGH-HOLE, TAB-UP: DOC# PAGE ZIGZAG OUTPUT PINS PATTERN M 0 STRAIGHT-ROW OUTPUT PINS PATTERN M0 THROUGH-HOLE, TAB-DOWN: ZIGZAG OUTPUT PINS PATTERN: 8 CORES SCHEMATIC DESIGN M 8 CORES SCHEMATIC DESIGN M0 STRAIGHT-ROW OUTPUT PINS PATTERN M 0 THROUGH-HOLE VERTICAL M XN, GANG TYPE THROUGH-HOLE, TAB-UP: ZIGZAG OUTPUT PINS PATTERN M 8 STRAIGHT-ROW OUTPUT PINS PATTERN M08 THROUGH-HOLE, TAB-DOWN: ZIGZAG OUTPUT PINS PATTERN: X M0 8 XN, STACK TYPE THROUGH-HOLE ZIGZAG OUTPUT PINS PATTERN: X, X, X8 (WITH LED) M X, X, X8 (WITHOUT LED) M 0 VERTICAL-ROW OF ZIGZAG OUTPUT PINS PATTERN: X M0 X, X, X8 M9 80 X, X, X8 (WITH PoE FEATURE AND WITHOUT LED) M8 8 X, X, X8 (WITH PoE FEATURE AND WITH LED) M 9

Table of Content Magnetic Integrated Connector Modules DATA SHEETS 0/00 BASE-T APPLICATIONS SINGLE PORT THROUGH-HOLE, TAB-UP: ZIGZAG OUTPUT PINS PATTERN STRAIGHT-ROW OUTPUT PINS PATTERN: WITH LED WITHOUT LED DOC# MJ00 MJ00 MJ00 PAGE 98 0 08 WITH PoE FEATURE MJ0 THROUGH-HOLE, TAB-DOWN: ZIGZAG OUTPUT PINS PATTERN: CORES SCHEMATIC DESIGN MJ0 CORES SCHEMATIC DESIGN MJ00 STRAIGHT-ROW OUTPUT PINS PATTERN: WITHOUT LED MJ00 WITH PoE FEATURE MJ08 0 THROUGH-HOLE,VERTICAL TYPE MJ09 SMD, TAB-DOWN MJ08 8 XN, GANG TYPE THROUGH-HOLE, TAB-UP: ZIGZAG OUTPUT PINS PATTERN: X MJ0 STRAIGHT-ROW OUTPUT PINS PATTERN: X, WITH LED MJ0 8 THROUGH-HOLE, TAB-DOWN: ZIGZAG OUTPUT PINS PATTERN: X MJ009 STRAIGHT-ROW OUTPUT PINS PATTERN: X, WITHOUT LED MJ00 8 XN, STACK TYPE THROUGH-HOLE: ZIGZAG OUTPUT PINS PATTERN: X, X, X8 (WITH LED) MJ0 X, X, X8 (WITHOUT LED) MJ0 Tel: (8) 9 8 Fax: (8) 9 0 X, X, X8 (WITH PoE FEATURE MJ09 AND TVS DEVICE)

Table of Content Magnetic Integrated Connector Modules DATA SHEETS VERTICAL-ROW OF ZIGZAG OUTPUT PINS PATTERN: X, X, X8 (WITH PoE FEATURE) Tel: (8) 9 MJ0 Fax: (8) 9 80 0 COMBO TYPE (RJ- PLUS USB PORTS) MJ0 8 SUPPLEMENTARY INFORMATION PART NUMBER INDEX 9

IC Cross Reference Magnetic Integrated Connector Modules 000Base-T Applications Manufacturer Agere 000BASE-T APPLICATIONS IC Information Package Information Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet ET0, ET0 X, Tab up Straight MJ-UGYA-GS M0 ET08 X, Tab up Straight MJ-UGYA-GS M0 ET0 X, Tab up Straight MJ-UGYA-G09 Contact Us ET00 X, Tab up Straight MJ-UGYA-GS M08 ET00, ET0 X, Tab up Straight MJ-UGYA-GS M08 X, Tab up Straight MJ-UGYA-G09 Contact Us X, Stack Vertical MJ-NNNA0G M9 X, Stack Vertical MJ-NNNA0G M9 X8, Stack Vertical MJ-8NNNA0G M9 BCM00, BCM0 X, Tab up Straight MJ-UGYA-GS M0 BCM//S X, Tab up Straight MJ-UGYA-GS M0 BCM0/ X, Tab up Straight MJ-UGYA-G09 Contact Us BCM0/0/0/0/0 X, Tab up Straight MJ-UGYA-GS M08 Broadcom BCM0//, BCM0 BCM0// X, Tab up X, Tab up Straight Straight MJ-UGYA-GS MJ-UGYA-G09 M08 Contact Us BCM///S X, Stack Vertical MJ-NNNA0G M9 BCM8/8/88 X, Stack Vertical MJ-NNNA0G M9 BCM//8/8/88 X8, Stack Vertical MJ-8NNNA0G M9 80/ / / X, Tab up Straight MJ-UGYA-GS M0 8/ / / X, Tab up Straight MJ-UGYA-GS M0 80 X, Tab up Straight MJ-UGYA-G09 Contact Us X, Tab up Straight MJ-UGYA-GS M08 Intel X, Tab up Straight MJ-UGYA-GS M08 X, Tab up Straight MJ-UGYA-G09 Contact Us X, Stack Vertical MJ-NNNA0G M9 X, Stack Vertical MJ-NNNA0G M9 X8, Stack Vertical MJ-8NNNA0G M9 L8000 X, Tab up Straight MJ-UGYA-GS M0 L800 X, Tab up Straight MJ-UGYA-GS M0 X, Tab up Straight MJ-UGYA-G09 Contact Us X, Tab up Straight MJ-UGYA-GS M08 LSI Logic X, Tab up Straight MJ-UGYA-GS M08 X, Tab up Straight MJ-UGYA-G09 Contact Us X, Stack Vertical MJ-NNNA0G M9 X, Stack Vertical MJ-NNNA0G M9 X8, Stack Vertical MJ-8NNNA0G M9 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-GIC(0 ) Revised in /

IC Cross Reference Magnetic Integrated Connector Modules 000Base-T Applications Manufacturer Marvell Semiconductor IC Information 88E00/0S 88E/ 88E00/00S/0 88E0S/0/0S 88E//9 88E8000/0/0 88E800 88E80//0/ 000BASE-T APPLICATIONS X, Tab up X, Tab up X, Tab up X, Tab up X, Tab up X, Tab up X, Stack X, Stack X8, Stack Package Information Straight Straight Straight Straight Straight Straight Vertical Vertical Vertical Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet MJ-UGYA-GS MJ-UGYA-GS MJ-UGYA-G09 MJ-UGYA-GS MJ-UGYA-GS MJ-UGYA-G09 MJ-NNNA0G MJ-NNNA0G MJ-8NNNA0G M0 M0 Contact Us M08 M08 Contact Us M9 M9 M9 KS900 X, Tab up Straight MJ-UGYA-GS M0 X, Tab up Straight MJ-UGYA-GS M0 X, Tab up Straight MJ-UGYA-G09 Contact Us Micrel (Kendin) X, Tab up X, Tab up X, Tab up Straight Straight Straight MJ-UGYA-GS MJ-UGYA-GS MJ-UGYA-G09 M08 M08 Contact Us X, Stack Vertical MJ-NNNA0G M9 X, Stack Vertical MJ-NNNA0G M9 X8, Stack Vertical MJ-8NNNA0G M9 MY00 X, Tab up Straight MJ-UGYA-GS M0 X, Tab up Straight MJ-UGYA-GS M0 X, Tab up Straight MJ-UGYA-G09 Contact Us X, Tab up Straight MJ-UGYA-GS M08 Mysticom X, Tab up Straight MJ-UGYA-GS M08 X, Tab up Straight MJ-UGYA-G09 Contact Us X, Stack Vertical MJ-NNNA0G M9 X, Stack Vertical MJ-NNNA0G M9 X8, Stack Vertical MJ-8NNNA0G M9 DP880 X, Tab up Straight MJ-UGYA-GS M0 DP88/ X, Tab up Straight MJ-UGYA-GS M0 DP88 X, Tab up Straight MJ-UGYA-G09 Contact Us National Semiconductor X, Tab up X, Tab up X, Tab up Straight Straight Straight MJ-UGYA-GS MJ-UGYA-GS MJ-UGYA-G09 M08 M08 Contact Us X, Stack Vertical MJ-NNNA0G M9 X, Stack Vertical MJ-NNNA0G M9 X8, Stack Vertical MJ-8NNNA0G M9 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-GIC(0 ) Revised in /

IC Cross Reference Magnetic Integrated Connector Modules 000Base-T Applications Manufacturer Realtek 000BASE-T APPLICATIONS IC Information Package Information Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet RTL8 RTL89 X, Tab up X, Tab up X, Tab up X, Tab up X, Tab up X, Tab up X, Stack X, Stack X8, Stack Straight Straight Straight Straight Straight Straight Vertical Vertical Vertical MJ-UGYA-GS MJ-UGYA-GS MJ-UGYA-G09 MJ-UGYA-GS MJ-UGYA-GS MJ-UGYA-G09 MJ-NNNA0G MJ-NNNA0G MJ-8NNNA0G M0 M0 Contact Us M08 M08 Contact Us M9 M9 M9 VSC80/8 X, Tab up Straight MJ-UGYA-GS M0 VSC8/80 X, Tab up Straight MJ-UGYA-GS M0 VSC8 X, Tab up Straight MJ-UGYA-G09 Contact Us Vitesse (Cicada) Semiconductor VSC8/8 VSC88/88 VSC80/8 X, Tab up X, Tab up X, Tab up Straight Straight Straight MJ-UGYA-GS MJ-UGYA-GS MJ-UGYA-G09 M08 M08 Contact Us VSC0/0 X, Stack Vertical MJ-NNNA0G M9 X, Stack Vertical MJ-NNNA0G M9 X8, Stack Vertical MJ-8NNNA0G M9 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-GIC(0 ) Revised in /

IC Cross Reference Magnetic Integrated Connector Modules 0/00Base-T Applications Manufacturer AMD 0/00BASE-T APPLICATIONS IC Information Package Information Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet AM9C8/C8 AM9C9/9/C9/ AM9C9/C9/C9 X, Tab down X, Tab down X, Tab down X, Tab down Straight MJ-DNNA0-HJ MJ-DNNA0-HP MJ-SNNA-HQ MJ-DNNA0-HD Contact Us Contact Us Contact Us MJ009 X, Tab down MJ-DGYA0-HD Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 AM9C8 X, Tab down MJ-DNNA0-HD Contact Us AC0, AC0L X, Tab down MJ-DNNA0-HJ Contact Us BCM0/ X, Tab down MJ-DNNA0-HP Contact Us BCM X, Tab down Straight MJ-SNNA-HQ Contact Us BCM00/0/ X, Tab down MJ-DGYA-HD MJ0 BCM X, Tab down Straight MJ-SNNA-HL MJ08 BCM/8 X, Tab down MJ-DNNA0-HD MJ0 BCM0/80 X, Tab up MJ-UGYA-HN Contact Us Broadcom AC0, BCM08R AC0/0 X, Tab down X, Tab down MJ-DNNA0-HD MJ-DGYA0-HD MJ009 Contact Us BCM/(M)/ X, Stack MJ-NNNA0-HG MJ0 BCM X, Stack MJ-NNNA0-HG MJ0 AC0/08 X8, Stack MJ-8NNNA0-HG MJ0 BCM8/8/8 BCM8/8 BCM8 BCM CS89 X, Tab down MJ-DNNA0-HJ Contact Us CS89T X, Tab down MJ-DNNA0-HP Contact Us X, Tab down Straight MJ-SNNA-HQ Contact Us Cirrus Logic X, Tab down X, Tab down MJ-DNNA0-HD MJ-DGYA0-HD MJ009 Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 DM9 X, Tab down MJ-DNNA0-HJ Contact Us DM90A X, Tab down MJ-DNNA0-HD MJ009 Davicom DM90 DM90/9 X, Tab down X, Stack MJ-DGYA0-HD MJ-NEEA0-HN Contact Us MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-HIC(0 ) Revised in /

IC Cross Reference Magnetic Integrated Connector Modules 0/00Base-T Applications Manufacturer IC+ 0/00BASE-T APPLICATIONS IC Information Package Information Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet 09-F, 99A X, Tab down MJ-DNNA0-HJ Contact Us IP00A X, Tab down MJ-DNNA0-HP Contact Us IP08 X, Tab down Straight MJ-SNNA-HQ Contact Us IP X, Tab down MJ-DNNA0-HD MJ009 IP0 X, Tab down MJ-DGYA0-HD Contact Us X, Stack MJ-NNNA0-HG MJ0 X, Stack MJ-NNNA0-HG MJ0 X8, Stack MJ-8NNNA0-HG MJ0 ICS Infineon (AMD Tek) Intel ICS890/89 X, Tab down X, Tab down X, Stack X, Stack X8, Stack Straight MJ-DNNA0-HJ ICS89 X, Tab down MJ-DNNA0-HP PSB X, Tab down X, Tab down X, Tab down X, Tab down X, Stack X, Stack X8, Stack Straight MJ-SNNA-HQ MJ-DNNA0-HD MJ-DGYA0-HD MJ-NEEA0-HN MJ-NEEA0-HN MJ-8NEEA0-HN MJ-DNNA0-HJ ADM8/8/9 X, Tab down MJ-DNNA0-HP ADM9, AN98B AN98B/L automdx ADM0 ADM08//09 ADM09/909 ADM99L 8/QM/ER X, Tab down X, Tab down X, Stack X, Stack X8, Stack X, Tab down Straight MJ-SNNA-HQ MJ-DNNA0-HD MJ-DGYA0-HD MJ-NNNA0-HG MJ-NNNA0-HG MJ-8NNNA0-HG MJ-NEEA0-HN MJ-NEEA0-HN MJ-8NEEA0-HN MJ-DNNA0-HJ 8/EZ/0 X, Tab down MJ-DNNA0-HP 89/9ER LXT90A/9(ALC)/9A LXT9 LXT9 X, Tab down X, Tab down X, Tab down X, Tab down X, Tab down X, Tab down MJ-SNNA-HQ MJ-DNNA0-HD MJ-DGYA-HD MJ-DGYA-H0 MJ-DNNA0-HD MJ-DGYA0-HD Contact Us Contact Us Contact Us MJ009 Contact Us MJ0 MJ0 MJ0 Contact Us Contact Us Contact Us MJ009 Contact Us MJ0 MJ0 MJ0 MJ0 MJ0 MJ0 Contact Us Contact Us Contact Us MJ0 MJ0 MJ00 MJ009 Contact Us Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-HIC(0 ) Revised in /

IC Cross Reference Magnetic Integrated Connector Modules 0/00Base-T Applications Manufacturer Intel (Continued) 0/00BASE-T APPLICATIONS IC Information Package Information Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet LXT9/9 X, Tab down MJ-DNNA0-HD MJ009 LXT9// X, Tab down MJ-DGYA0-HD Contact Us LXT98 LXT98/98/98 LXT98/LXT9880 X, Stack X, Stack X8, Stack MJ-NNNA0-HG MJ-NNNA0-HG MJ-8NNNA0-HG MJ0 MJ0 MJ0 L80 X, Tab down MJ-DNNA0-HJ Contact Us L80 X, Tab down MJ-DNNA0-HP Contact Us L80 X, Tab down Straight MJ-SNNA-HQ Contact Us LSI X, Tab down X, Tab down MJ-DNNA0-HD MJ-DGYA0-HD MJ009 Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 Marvell MICREL (KENDIN) 88E0 X, Tab down X, Tab down Straight MJ-DNNA0-HJ 88E0 X, Tab down MJ-DNNA0-HP 88E00/88E8 88E0, 88E0 88E08/08/08 88E08 88E09 KS8B/BL/ X, Tab down X, Tab down X, Stack X, Stack X8, Stack X, Tab down Straight MJ-SNNA-HQ MJ-DNNA0-HD MJ-DGYA0-HD MJ-NNNA0-HG MJ-NNNA0-HG MJ-8NNNA0-HG MJ-DNNA0-HJ KS899/899M/899F X, Tab down MJ-DNNA0-HP KS8 KS89P KS899/9M/9MA/9E KS899X KS899/KS8998 KS8999 X, Tab down X, Tab up X, Stack X, Stack X8, Stack X, Tab down X, Tab down X, Tab down X, Tab down X, Stack X, Stack X8, Stack MJ-SNNA-HQ MJ-UGYA-H0Y MJ-DNNA0-HD MJ-DGYA0-HD MJ-NEEA0-HN MJ-NEEA0-HN MJ-8NEEA0-HN MJ-DNNA0-HD MJ-DGYA0-HD MJ-NNNA0-HG MJ-NNNA0-HG MJ-8NNNA0-HG Contact Us Contact Us Contact Us MJ009 Contact Us MJ0 MJ0 MJ0 Contact Us Contact Us Contact Us MJ00 MJ009 Contact Us MJ0 MJ0 MJ0 MJ009 Contact Us MJ0 MJ0 MJ0 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-HIC(0 ) Revised in /

IC Cross Reference Magnetic Integrated Connector Modules 0/00Base-T Applications Manufacturer MicroLinear 0/00BASE-T APPLICATIONS IC Information Package Information Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet ML X, Tab down MJ-DNNA0-HJ Contact Us X, Tab down MJ-DNNA0-HP Contact Us X, Tab down Straight MJ-SNNA-HQ Contact Us X, Tab down MJ-DNNA0-HD MJ009 X, Tab down MJ-DGYA0-HD Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 MTD9 X, Tab down MJ-DNNA0-HJ Contact Us MTD9 X, Tab down MJ-DNNA0-HP Contact Us MTD98 X, Tab down Straight MJ-SNNA-HQ Contact Us Myson X, Tab down X, Tab down MJ-DNNA0-HD MJ-DGYA0-HD MJ009 Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 MystilPHY0 X, Tab down MJ-DNNA0-HJ Contact Us X, Tab down MJ-DNNA0-HP Contact Us X, Tab down Straight MJ-SNNA-HQ Contact Us Mysticom X, Tab down X, Tab down MJ-DNNA0-HD MJ-DGYA0-HD MJ009 Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 National Semiconductor DP88 X, Tab down Straight MJ-DNNA0-HJ DP888 X, Tab down MJ-DNNA0-HP DP88 X, Tab down X, Tab down X, Tab down X, Stack X, Stack X8, Stack X, Tab down X, Tab down MJ-SNNA-HQ MJ-DNNA0-H0 MJ-DNNA0-HP MJ-DNNA0-HD MJ-DGYA0-HD MJ-NEEA0-HN MJ-NEEA0-HN MJ-8NEEA0-HN Contact Us Contact Us Contact Us MJ00 Contact Us MJ009 Contact Us MJ0 MJ0 MJ0 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-HIC(0 ) Revised in /

IC Cross Reference Magnetic Integrated Connector Modules 0/00Base-T Applications Manufacturer Realtek 0/00BASE-T APPLICATIONS IC Information Package Information Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet RTL800C/0L/00B X, Tab down MJ-DNNA0-HJ Contact Us RTL89/B/B/CL X, Tab down MJ-DNNA0-HP Contact Us RTL80 X, Tab down Straight MJ-SNNA-HQ Contact Us RTL80CL/80BL X, Tab down MJ-DGYA-H0 MJ00 RTL809AS X, Tab up MJ-UGYA-HN Contact Us RTL808 X, Tab up MJ-UGYA-H0Y MJ00 RTL8 X, Tab down MJ-DNNA0-HD MJ0 X, Tab down MJ-DNNA0-HD MJ009 X, Tab down MJ-DGYA0-HD Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 X, Stack MJ-NNNA0-HG MJ0 X, Stack MJ-NNNA0-HG MJ0 X8, Stack MJ-8NNNA0-HG MJ0 SiS900 X, Tab down MJ-DNNA0-HJ Contact Us X, Tab down MJ-DNNA0-HP Contact Us X, Tab down Straight MJ-SNNA-HQ Contact Us SIS X, Tab down X, Tab down MJ-DNNA0-HD MJ-DGYA0-HD MJ009 Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 LAN8C8/8 X, Tab down MJ-DNNA0-HJ Contact Us LAN9C00FD/0 X, Tab down MJ-DNNA0-HP Contact Us LAN9C9, LAN9C9I X, Tab down Straight MJ-SNNA-HQ Contact Us LAN9C X, Tab down MJ-DNNA0-H0 MJ00 SMSC LAN9 X, Tab down X, Tab down MJ-DGYA-HD MJ-DNNA0-HD MJ0 MJ009 X, Tab down MJ-DGYA0-HD Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-HIC(0 ) Revised in /

IC Cross Reference Magnetic Integrated Connector Modules 0/00Base-T Applications Manufacturer Teridian (TDK) 0/00BASE-T APPLICATIONS IC Information Package Information Cross Reference Part Number Package Type Footprint Style E&E Part Number Data Sheet 8P X, Tab down MJ-DNNA0-HJ Contact Us 8Q X, Tab down MJ-DNNA0-HP Contact Us X, Tab down Straight MJ-SNNA-HQ Contact Us X, Tab down MJ-DNNA0-HD MJ009 X, Tab down MJ-DGYA0-HD Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 TPS0/ X, Tab down MJ-DNNA0-HJ Contact Us X, Tab down MJ-DNNA0-HP Contact Us X, Tab down Straight MJ-SNNA-HQ Contact Us Texas Instruments X, Tab down X, Tab down MJ-DNNA0-HD MJ-DGYA0-HD MJ009 Contact Us X, Stack MJ-NEEA0-HN MJ0 X, Stack MJ-NEEA0-HN MJ0 X8, Stack MJ-8NEEA0-HN MJ0 MT9 X, Tab down MJ-DNNA0-HJ Contact Us X, Tab down MJ-DNNA0-HP Contact Us X, Tab down Straight MJ-SNNA-HQ Contact Us Zarlink (Plessey/Mitel) X, Tab down X, Tab down MJ-DNNA0-HD MJ-DGYA0-HD MJ009 Contact Us X, Stack MJ-NNNA0-HG MJ0 X, Stack MJ-NNNA0-HG MJ0 X8, Stack MJ-8NNNA0-HG MJ0 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-HIC(0 ) Revised in /

Selection Guide Magnetic Integrated Connector Modules 000 BASE-T APPLICATIONS Packagte Information Recommended Designs Package Type Assembly Type Footprint Style LED E&E Part Number Package Code Data Sheet MJ-DGYA0-G MD-0A M With LED MJ-DGYA-G MD-0B M x, Tab Down Through Hole Without LED MJ-DNNA0-G MD-0C M Straight-row With LED MJ-DGYA-G09 MD-0B M Without LED MJ-DNNA-G09 MD-0A M With LED MJ-UGYA-G MU-0A M x, Tab Up Through Hole Without LED MJ-UNNA0-G MU-0B M Straight-row With LED Without LED MJ-UGYA-GS MJ-UNNA-GS MU-0A MU-0A M0 M0 x, Vertical Through Hole With LED MJ-VGYA0-GU MV-0B M Without LED MJ-VNNA0-GK MV-0A M x, Tab Down Through Hole With LED MJ-DGYA-G MJ-DGYA0-G MD-0A MD-0B M0 M0 Without LED MJ-DNNA0-G MD-0C M0 x, Tab up Through Hole Straight-row With LED Without LED With LED Without LED MJ-UGYA-G MJ-UNNA0-G MJ-UGYA-GS MJ-UNNA-GS MU-0A MU-0B MU-0A MU-0A M M M08 M08 x Through Hole Straight-row With LED MJ-NEEA-G08 MJN-0A M0 x Through Hole With LED MJ-NEEA0-G00 MJN-0A Without LED MJ-NNNA0-G00 MJN-0A M M0 x Through Hole With LED Without LED MJ-NEEA0-G00 MJ-NNNA0-G00 MJN-0A MJN-0A M M0 x8 Through Hole With LED Without LED MJ-8NEEA0-G00 MJ-8NNNA0-G00 MJ8N-0A MJ8N-0A M M0 RJ- + USB(X) Through Hole Straight-row With LED MC-AGYA-G8 MCA-0A Contact Us 000 BASE-T APPLICATIONS (WITH PoE FEATURE) Packagte Information Recommended Designs Package Type Assembly Type Footprint Style LED E&E Part Number Package Code Data Sheet x Through Hole Vertical With LED MJ-NEEA-E0 MJN-0B M Without LED MJ-NNNA-E0 MJN-0A M8 x Through Hole Vertical With LED Without LED MJ-NEEA-E0 MJN-0B M MJ-NNNA-E0 MJN-0A M8 x8 Through Hole Vertical With LED Without LED MJ-8NEEA-E0 MJ8N-0B M MJ-8NNNA-E0 MJ8N-0A M8 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-SG(08)

Selection Guide Magnetic Integrated Connector Modules 0/00 BASE-T APPLICATIONS Packagte Information Recommended Designs Package Type Assembly Type Footprint Style LED E&E Part Number Package Code Data Sheet MJ-DGYA0-HD MD-0A MJ0 With LED Through Hole MJ-DGYA-HD MD-0B MJ0 x, Tab Down Without LED MJ-DNNA0-HD MD-0C MJ0 SMD Straight-row Without LED MJ-SNNA-HL MS-0A MJ08 With LED MJ-UGYA-H0Y MU-0A MJ00 x, Tab Up Through Hole Without LED MJ-UNNA0-H0Y MU-0B MJ00 Straight-row With LED Without LED MJ-UGYA-HK MJ-UNNA-HK MU-0A MU-0A MJ00 MJ00 x, Vertical Through Hole With LED MJ-VGYA0-H0Y MV-0B MJ09 Without LED MJ-VNNA0-H0Y MV-0A MJ09 x, Tab Down Through Hole x, Tab up Through Hole Straight-row With LED Without LED With LED Without LED Without LED MJ-DGYA-HD MD-0A MJ009 MJ-DNNA0-HD MD-0C MJ009 MJ-UGYA-H0Y MU-0A MJ0 MJ-UNNA0-H0Y MU-0B MJ0 MJ-UNNA-HK MU-0A MJ0 x, Tab Down Through Hole With LED Without LED MJ-DGYA-HD MD-0A Contact Us MJ-DGYA0-HD MD-0B Contact Us MJ-DNNA0-HD MD-0C Contact Us x Through Hole Without LED MJ-NNNA0-H0Y MJN-0A Contact Us MJ-NNNA-HG MJN-0A Contact Us Vertical With LED MJ-NEEA-HG MJN-0B Contact Us x Through Hole x Through Hole x8 Through Hole With LED Without LED With LED Without LED With LED Without LED MJ-NEEA0-HN MJN-0A MJ0 MJ-NNNA0-HN MJN-0A MJ0 MJ-NEEA0-HN MJN-0A MJ0 MJ-NNNA0-HN MJN-0A MJ0 MJ-8NEEA0-HN MJ8N-0A MJ0 MJ-8NNNA0-HN MJ8N-0A MJ0 RJ- + USB(X) Through Hole Straight-row With LED MC-AGYA-HU MCA-0A MJ0 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-SG(0) Revised in 0/0

Selection Guide Magnetic Integrated Connector Modules 0/00 BASE-T APPLICATIONS (WITH PoE FEATURE) Packagte Information Recommended Designs Package Type Assembly Type Footprint Style LED E&E Part Number Package Code Data Sheet X, Tab Down Through Hole Straight-row With LED MJ-DGYA9-VB MD-0A MJ08 Without LED MJ-DNNA9-VB MD-0B MJ08 X, Tab Up Through Hole (Special) With LED MJ-UGYA8-VB0 MU-09B MJ0 Without LED MJ-UNNA8-VB0 MU-09A MJ0 X Through Hole Without LED MJ-NNNA0-V0N MJN-0A+0 MJ0 X Through Hole Without LED MJ-NNNA0-V0N MJN-0A+0 MJ0 X8 Through Hole Without LED MJ-8NNNA0-V0N MJ8N-0A+0 MJ0 Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. Copyrights 00, E&E Magnetic Products Limited. MIC-SG(0) Revised in 0/0

000Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern Magnetic Integrated Connector Modules SCHEMATICS Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs of Category UTP cable with 000 Base-T full duplex applications Operating temperature 0 C to +0 C UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRUGYA-G0 MJRUGYA-G0 MJRUGYA-G MJRUNNA0-G0 MJRUNNA0-G0 MJRUNNA0-G TC TC TC TC TC G / Y G / Y G / Y MU-0A MU-0A MU-0A MU-0B MU-0B G0 G0 G G0 G0 TC MU-0B G Notes:. Ordering Information: MJRUGYA-abbbc/MJRUNNA0-abbbc. MJRUGYA = Product Type (xxrxxxxxxxx, R respresent Internal Control Code). MJRUNNA0 = Product Type (xxrxxxxxxxx, R respresent Internal Control Code). abbb = Schematic code. c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: T = Isolation transformer ; C = Common-mode choke ; A = Auto-transformer. LEDs (Left / Right) : G = Green ; Y = Yellow ; = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M(0) Revised in 08/

000Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern MU-0A NOTE LED (LEFT) C R (E&E P/N) (DATE) UR US 0.0. MAX. MECHANICAL DIMENSIONS Chip side 0.0 0X DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 DIA: 0.0 X.0 Cable side LED (RIGHT) 0 8 9 0.0. 0.. 0.0. Recommended hole pattern viewed from component side 0.8. MAX. 0.0.. 0.00. 0.0.. 0.00.. 0.80. 0.0.0 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 MU-0B NOTE C R (E&E P/N) (DATE) UR US Chip side 0.0 0X DIA: 0.89 0.0 X DIA:. DIA: 0. X.0 Cable side 0 8 9 0.0. 0.0. 0.0.. 0.00. 0.00.. 0.0. 0.0.0 Recommended hole pattern viewed from component side 0.0. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0) Revised in 08/

000Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern G0 SCHEMATICS MDI_0+ MDI_+ MDI_0- MDI_- MDI_+ Primary MDI_- MDI_+ 8 MDI_- MDI_- 0 RJ- Chip Side 9 Shield 0.uF 0.uF 0.uF 0.uF 000pF/000V Secondary J J J J J J RJ- Cable Side G0 Primary MDI_0+ MDI_+ MDI_0- MDI_- nf nf Shield Secondary J J MDI_+ MDI_- nf J J MDI_+ 8 GND 0 MDI_- VCC 9 RJ- Chip Side nf 000pF/000V RJ- Cable Side J J G MDI_- 0 MDI_- MDI_0- Primary MDI_+ 8 MDI_0+ MDI_+ MDI_+ 9 RJ- Chip Side Shield 000pF/000V Secondary J J J J J J RJ- Cable Side M(0) Revised in 08/

000Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern LEDS COLOR AND POLARITY MU-0A LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR LED (RIGHT) PIN PIN PIN PIN LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M(0) Revised in 08/

RoHS compliant. Ordering Information: MJRUGYA-abbbc/MJRUNNA-abbbc. MJRUGYA MJRUNNA abbb c = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Schematic code(g09/gs/g09/gs). = Packaging Code (No Code = Non tape and reel packaging, e.g. Tray Packaging).. F represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: T = Isolation transformer ; C = Common-mode choke ; A = Auto-transformer. LEDs (Left / Right) : G = Green ; Y = Yellow ; = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M0(0) Revised in 08/

M0(0) Revised in 08/

M0(0) Revised in 08/

FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M0(0) Revised in 08/

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern (8 cores designs) Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs fo Category UTP cable with 000Base-T full duplex applications o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic Notes: MJRDGYA0-G00 MJRDGYA0-G0 MJRDGYA0-G MJRDGYA-G00 MJRDGYA-G0 MJRDGYA-G MJRDNNA0-G00 MJRDNNA0-G0 MJRDNNA0-G. "F" represents the test frequency specified in MHz. TC TC TC TC TC MD-0A M(0) G / Y G / Y G / Y G / Y G / Y MD-0A MD-0A MD-0B MD-0B TC G / Y MD-0B TC MD-0C TC MD-0C. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke.. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional. TC MD-0C. Ordering Information: MJRDGYA0-abbbc/MJRDGYA-abbbc/MJRDNNA0-abbbc. MJRDGYA0 MJRDGYA MJRDNNA0 abbb c = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Schematic code(g00/g0/g). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. G00 G0 G G00 G0 G G00 G0 G

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern (8 cores designs) MD-0A NOTE C R (E&E P/N) (DATE) UR US MECHANICAL DIMENSIONS Chip side Cable side 0X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 9 8 0 Recommended hole pattern viewed from component side 0.08.. 0.0. 0. 8.8 0.. 0.0. 0.0.0 0.00.. 0.0.0 0.0. 0.0. 0.0. MAX. 0.8. MAX. 0. MAX..0 REFERENCE OR GAUGE PLANE LED (LEFT) LED (RIGHT) 0. 0.80 0..8 MD-0B NOTE C R (E&E P/N) (DATE) 0.0. MAX. UR US Chip side Cable side 0.0 0X DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 9 8 0 Recommended hole pattern viewed from component side 0.8. MAX. 0.08.. 0.0. 0..8 0.0. 0.0. 0.0. 0.00.. 0.0.0 0.9.90 0.98. 0.98. 0..0 MAX. REFERENCE OR GAUGE PLANE LED (LEFT) LED (RIGHT) 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern (8 cores designs) MD-0C C R (E&E P/N) (DATE) UR US MECHANICAL DIMENSIONS Chip side 0X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 9 8 0 0.08.. 0.0. 0.0. 0.00.. 0.0.0 Cable side NOTE 0.0. 0.0. Recommended hole pattern viewed from component side 0.0. MAX. 0.8. MAX. 0. MAX..0 REFERENCE OR GAUGE PLANE 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. M(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern (8 cores designs) SCHEMATICS G00 MDI_- 9 Primary 0 Shield 000pF/000V Secondary MDI_- MDI_+ 8 J J MDI_+ MDI_- J J MDI_0- MDI_+ MDI_0+ J J RJ- Chip Side RJ- Cable Side G0 Primary 0 Shield 000pF/000V 0.uF Secondary G MDI_+ MDI_+ MDI_+ Primary MDI_- 0 9 MDI_- 9 MDI_+ MDI_0- MDI_- MDI_- MDI_- MDI_+ MDI_0+ RJ- Chip Side 8 8 0.uF 0.uF 0.uF Shield 000pF/000V RJ- Cable Side J J J J J J Secondary J J J MDI_+ MDI_0+ MDI_- MDI_0- RJ- Chip Side RJ- Cable Side J J J M(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern (8 cores designs) LEDS COLOR AND POLARITY MD-0A LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR LED (RIGHT) PIN PIN PIN PIN LED (LEFT) GREEN YELLOW LED (RIGHT) LEDS COLOR AND POLARITY MD-0B LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN PIN PIN PIN LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern (8 cores designs) M(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores designs) Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs fo Category UTP cable with 000Base-T full duplex applications o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic Notes: MJRDGYA0-G00 MJRDGYA0-G0 MJRDGYA0-G MJRDGYA-G00 MJRDGYA-G0 MJRDGYA-G MJRDNNA0-G00 MJRDNNA0-G0 MJRDNNA0-G. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; 'C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : 'G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional. CT: CT: CT: CT: CT:. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. TCA TCA TCA TCA TCA MD-0A M0(0) G / Y G / Y G / Y G / Y G / Y MD-0A MD-0A MD-0B MD-0B CT: TCA G / Y MD-0B CT: TCA MD-0C CT: TCA MD-0C CT: TCA MD-0C. Ordering Information: MJRDGYA0-abbbc/MJRDGYA-abbbc/MJRDNNA0-abbbc. MJRDGYA0 MJRDGYA MJRDNNA0 abbb c = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Schematic code(g00/g0/g). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited. G00 G0 G G00 G0 G G00 G0 G

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores designs) MD-0A NOTE C R (E&E P/N) (DATE) UR US MECHANICAL DIMENSIONS Chip side Cable side 0X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 9 8 0 Recommended hole pattern viewed from component side 0.08.. 0.0. 0. 8.8 0.. 0.0. 0.0.0 0.00.. 0.0.0 0.0. 0.0. 0.0. MAX. 0.8. MAX. 0. MAX..0 REFERENCE OR GAUGE PLANE LED (LEFT) LED (RIGHT) 0. 0.80 0..8 MD-0B NOTE C R (E&E P/N) (DATE) 0.0. MAX. UR US Chip side Cable side 0.0 0X DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 9 8 0 Recommended hole pattern viewed from component side 0.8. MAX. 0.08.. 0.0. 0..8 0.0. 0.0. 0.0. 0.00.. 0.0.0 0.9.90 0.98. 0.98. 0..0 MAX. REFERENCE OR GAUGE PLANE LED (LEFT) LED (RIGHT) 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M0(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores designs) MD-0C C R (E&E P/N) (DATE) UR US MECHANICAL DIMENSIONS Chip side 0X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 9 8 0 0.08.. 0.0. 0.0. 0.00.. 0.0.0 Cable side NOTE 0.0. 0.0. Recommended hole pattern viewed from component side 0.0. MAX. 0.8. MAX. 0. MAX..0 REFERENCE OR GAUGE PLANE 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. M0(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores designs) SCHEMATICS G00 Primary MDI_- 9 0 000pF/000V CT: Shield Secondary MDI_- MDI_+ 8 CT: J J MDI_+ MDI_- CT: J J MDI_+ J MDI_0- MDI_0+ CT: J RJ- Chip Side RJ- Cable Side G0 MDI_- Primary 9 0 000pF/000V 0.uF CT: Shield Secondary MDI_- MDI_+ 8 0.uF CT: J J MDI_+ MDI_- 0.uF CT: J J MDI_+ J MDI_0- MDI_0+ 0.uF CT: J RJ- Chip Side RJ- Cable Side G Primary MDI_+ 9 MDI_- 0 MDI_- 8 Shield 000pF/000V CT: Secondary J MDI_+ CT: J J MDI_- CT: J J MDI_+ MDI_0+ MDI_0- RJ- Chip Side CT: RJ- Cable Side J M0(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores designs) LEDS COLOR AND POLARITY MD-0A LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR LED (RIGHT) PIN PIN PIN PIN LED (LEFT) GREEN YELLOW LED (RIGHT) LEDS COLOR AND POLARITY MD-0B LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN PIN PIN PIN LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M0(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores designs) M0(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs fo Category UTP cable with 000Base-T full duplex applications o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRDNNA-G09 MJRDNNA-G09 CT: TC TCA MD-0A MD-0A G09 G09 MJRDGYA-G09 TC G / Y MD-0B G09 MJRDGYA-G09 CT: TCA G / Y MD-0B G09 Notes:. Ordering Information: MJRDNNA-abbbc/MJRDGYA-abbbc. MJRDNNA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRDGYA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(g09/g09). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; 'C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : 'G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern MD-0A C R (E&E P/N) (DATE) UR US MECHANICAL SCHEMATICS DIMENSIONS Chip side Cable side 0.0 X DIA: 0.89 0.00.0 0.0 X DIA:. 0. X DIA:.0 0 9 8 0.80.9 0.080.0 0.00 0.00.0 0. 0.00 0.00.8. 0.0.0 NOTE 0.0. MAX. Recommended hole pattern viewed from component side.00 0.8 MAX. 0.. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 0. 0.80 MD-0B C R (E&E P/N) (DATE) UR US Chip side Cable side 0.0 X DIA: 0.89 0.00.0 0.0 X DIA:. 0. X DIA:.0 0 9 8 0.80.9 0.080.0 0.00 0.00.0 0. 0.0.0 0.00 0.00.8. 0..8 0.9.90 NOTE 0.0. MAX. Recommended hole pattern viewed from component side.00 0.8 MAX. 0.98 0.98.. 0.. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 LED (LEFT) LED (RIGHT) 0. 0.80 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern G09 Primary MDI_- 9 MDI_CT MDI_+ 8 SCHEMATICS Shield 000pF/000V Secondary MDI_- MDI_CT J J MDI_+ MDI_- MDI_CT J J J MDI_+ MDI_0-0 J MDI_0CT MDI_0+ RJ- Chip Side SCHEMATIC RJ- Cable Side G09 Primary MDI_- 9 MDI_CT MDI_+ 8 CT: Shield 000pF/000V Secondary MDI_- MDI_CT CT: J J MDI_+ J MDI_- MDI_CT CT: J J MDI_+ MDI_0-0 CT: J MDI_0CT MDI_0+ RJ- Chip Side SCHEMATIC RJ- Cable Side M(0)

000 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern LEDS COLOR SCHEMATICS AND POLARITY MU-0A LED (LEFT) LED (RIGHT) LED (RIGHT) COLOR POLARITY POLARITY COLOR PIN PIN PIN PIN LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M(0)

000 Base-T Applications Single Port, Through Hole, Vertical Output Pins Pattern SCHEMATICS Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs of Category UTP cable with 000 Base-T full duplex applications Operating temperature 0 C to +0 C UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRVNNA0-GK TC MV-0A GK MJRVGYA0-GU TC G / Y MV-0B GU Notes:. Ordering Information: MJRVNNA0-abbbc/MJRVGYA0-abbbc. MJRVNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRVGYA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(gk/gu). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; 'C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : 'G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M(0)

000 Base-T Applications Single Port, Through Hole, Vertical Output Pins Pattern MV-0A 0..0 MAX. 0.0. MAX. NOTE MECHANICAL DIMENSIONS Footprint orientation with respect to RJ- cavity (viewed from component side) 0.0 X DIA:. 0.0 9X DIA: 0.89 0. X DIA:.0 9 8 0.0. 0.0. Recommended hole pattern (viewed from component side) 0.00 0. 0.00. 0.0 8.89 0.0.8 0.0.. 0.0. 0.0.0 REFERENCE OR GAUGE PLANE 0.8.9 MAX. C R (E&E P/N) (DATE) UR US 0..8 0..8 MV-0B LED (LEFT) 0..0 MAX. 0.0. MAX. NOTE LED (RIGHT) Footprint orientation with respect to RJ- cavity (viewed from component side) 0.0 X DIA:. 0.0 X DIA: 0.89 0. X DIA:.0 0 8 9 0.0. 0.0. Recommended hole pattern (viewed from component side) 0.0.. 0.00. 0.0 8.89 0.0.8 0.0. 0.0 8.89 0.00. 0.0. REFERENCE OR GAUGE PLANE 0.8.9 MAX. C R (E&E P/N) (DATE) UR US 0..8 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

000 Base-T Applications Single Port, Through Hole, Vertical Output Pins Pattern SCHEMATICS GK Primary MDI_0+ MDI_+ MDI_0- MDI_- Shield Secondary J J MDI_+ J J MDI_- MDI_- 9 MDI_+ 8 J J RJ- Chip Side 000pF/000V RJ- Cable Side GU MDI_0+ Primary MDI_+ MDI_- MDI_- MDI_0- MDI_- MDI_+ MDI_+ 9 RJ- Chip Side 8 0 Shield 000pF/000V Secondary RJ- Cable Side J J J J J J M(0)

000 Base-T Applications Single Port, Through Hole, Vertical Output Pins Pattern LEDS COLOR AND POLARITY MV-0B LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN PIN PIN PIN LED (RIGHT) GREEN YELLOW LED (LEFT) Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M(0)

000 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs fo Category UTP cable with 000Base-T full duplex applications Gang x design for Hub and Switch Applications o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRUGYA-G TC G / Y MU-0A G MJRUNNA0-G TC MU-0B G Notes:. Ordering Information: MJRUGYA-abbbc/MJRUNNA0-abbbc. MJRUGYA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRUNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(g). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; 'C" = Common-mode choke.. LEDs (Left / Right) : 'G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern MU-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT PORT.0 9. MAX. LED (LEFT) LED (RIGHT) 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 Chip side 0.0.9. 0.00. 0.0. 0.0. 0.00. 0.0.0. x DIA: 0.0.0 0 8 x DIA: 0.0. 9 PORT PORT PORT PORT x DIA: 0..0 0.0 0.8 0.0.0 0.8. 0.0.9 0.0.9 0.. 0.0.0 0.08.0 0.. 0.0 0.8 0..8 Cable side.00..0 8.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern MU-0B MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT PORT.0 9. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 Chip side 0.0.9. 0.00. 0.0. 0.0. 0.00. 0.0.0. 0x DIA: 0.0.0 0 8 x DIA: 0.0. 9 PORT PORT PORT PORT x DIA: 0..0.00. Cable side.0 8.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

000 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern SCHEMATICS G MDI_- MDI_0- Primary MDI_0+ MDI_+ Shield Secondary J J J J MDI_- 8 MDI_- 0 MDI_+ MDI_+ 9 RJ- Chip Side 000pF/000V RJ- Cable Side J J LEDS COLOR AND POLARITY MU-0A LED (LEFT) LED (RIGHT) LED (RIGHT) COLOR POLARITY POLARITY COLOR PIN PIN PIN PIN LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M(0)

000 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs fo Category UTP cable with 000Base-T full duplex applications Gang x design for Hub and Switch Applications o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRUGYA-G09 MJRUGYA-GS MJRUGYA-G09 MJRUGYA-GS MJRUNNA-G09 MJRUNNA-GS MJRUNNA-G09 MJRUNNA-GS TC G / Y MU-0A TC G / Y MU-0A CT: TCA G / Y MU-0A CT: TCA G / Y MU-0A TC MU-0A CT: CT: TC TCA TCA MU-0A MU-0A MU-0A G09 GS G09 GS G09 GS G09 GS Notes:. Ordering Information: MJRUGYA-abbbc/MJRUNNA-abbbc. MJRUGYA MJRUNNA abbb c. "F" represents the test frequency specified in MHz.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; 'C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : 'G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional. = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Schematic code(g09/gs/g09/gs). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M08(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins MU-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE.0 9. MAX..0 0. MAX. REFERENCE OR GAUGE PLANE 0..0 MAX. 0. 0.80 0..8 PORT PORT 0.80.9 0.00.0 0.0.9 0.080.0 0.00 0..0. Chip side 8X 0.0 DIA..0 0 9 8 PORT PORT PORT PORT 0.00. 0.00.8 0. X DIA..0 0.0 X DIA.. 0..8 Cable side.80.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M08(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins MU-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE LED (LEFT).0 9. MAX. LED (RIGHT).00.0 MAX. REFERENCE OR GAUGE PLANE 0..0 MAX. 0. 0.80 0..8 PORT PORT 0.0.9.0. 0.080.0 0.00 0.. 0.00.0 0.80.9 Chip side X 0.0 DIA..0 0.080.0 0.00 0. 0.80.9 0 9 8 0.00. 0.00.8 0.800 0. 0. X DIA..0 PORT PORT PORT PORT 0.0 X DIA.. 0..8 Cable side.80.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M08(0)

000 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins G09 Primary SCHEMATICS Shield MDI_0+ MDI_0CT MDI_0-0 Secondary MDI_+ MDI_CT J J MDI_- J MDI_+ MDI_CT J J MDI_- MDI_+ 8 J MDI_CT MDI_- 9 000pF/000V RJ- Cable Side RJ- Chip Side GS Primary Shield MDI_0+ MDI_0CT MDI_0-8 9 Secondary MDI_+ MDI_CT J J MDI_- J MDI_+ MDI_CT J J MDI_- MDI_+ 0 J MDI_CT MDI_- RJ- Chip Side 000pF/000V RJ- Cable Side G09 Primary Shield MDI_0+ MDI_0CT MDI_0-0 CT: Secondary MDI_+ MDI_CT CT: J J MDI_- J MDI_+ MDI_CT CT: J J MDI_- MDI_+ 8 CT: J MDI_CT MDI_- 9 000pF/000V RJ- Cable Side RJ- Chip Side M08(0)

000 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins GS Primary SCHEMATICS Shield MDI_0+ MDI_0CT MDI_0-8 9 CT: Secondary MDI_+ MDI_CT CT: J J MDI_- J MDI_+ MDI_CT CT: J J MDI_- MDI_+ 0 CT: J MDI_CT MDI_- RJ- Chip Side 000pF/000V RJ- Cable Side LED (RIGHT) LEDS COLOR SCHEMATICS AND POLARITY MU-0A LED (LEFT) LED (RIGHT) COLOR POLARITY POLARITY COLOR PIN PIN PIN PIN LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M08(0)

000 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins M08(0)

000 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs fo Category UTP cable with 000Base-T full duplex applications Gang x design for Hub and Switch Applications o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRDGYA0-G0 MJRDGYA0-G MJRDGYA-G0 MJRDGYA-G TC TC TC TC G / Y G / Y G / Y G / Y MD-0B MD-0B MD-0A MD-0A MJRDNNA0-G0 TC MD-0C MJRDNNA0-G TC MD-0C G0 G G0 G G0 G Notes:. Ordering Information: MJRDGYA0-abbbc/MJRDGYA-abbbc/MJRDNNA0-abbbc. MJRDGYA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRDGYA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRDNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(g0/g). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke.. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. M0(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern MD-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE.0 9. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 PORT PORT LED (LEFT) LED (RIGHT) Chip side X DIA. X DIA. X DIA. 0.0. 0.00. 0.0.0 0.0. 0..0 0.0.9. 0.00. 8 9 0.00. PORT PORT PORT PORT 0.0. 0..8 0.9.90. 0.0.0 Cable side. 0.0.9 0.09 0. 0.08 0...0 8.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M0(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern MD-0B MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE.0 9. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 PORT PORT LED (LEFT) LED (RIGHT) Chip side X DIA. X DIA. X DIA. 0.0. 0.00. 0.0.0 0.0. 0..0 0.0.9. 0.00. 8 9 0.00. PORT PORT PORT PORT 0.0. 0.090.9 0.0.0. 0.0.0 Cable side.0 8.9 Recommended hole pattern viewed from component side 0.00 0. 0.0 0. 0.0.9. 0.0.9 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M0(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern MD-0C MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE.0 9. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 PORT PORT Chip side X DIA. 0.0. 0.00. 0.0.0 0.0.9. 0.00. 9.00. 0.0.. 0.0.0 X DIA. X DIA. 0.0. 0..0 8 0 PORT PORT PORT PORT Cable side.0 8.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M0(0)

000 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern SCHEMATICS G0 Primary 0 000pF/000V 0.uF Shield Secondary MDI_- MDI_- MDI_+ MDI_0-9 MDI_+ MDI_- MDI_+ MDI_0+ 8 0.uF 0.uF 0.uF J J J J J J RJ- Chip Side RJ- Cable Side G Primary MDI_- 0 MDI_+ 9 MDI_- 8 Shield 000pF/000V Secondary J MDI_+ J J MDI_- J J MDI_+ MDI_0+ MDI_0- RJ- Chip Side RJ- Cable Side J Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. M0(0)

000 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern LED (RIGHT) LEDS COLOR AND POLARITY MD-0A LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN PIN PIN PIN LED (LEFT) GREEN YELLOW LEDS COLOR AND POLARITY MD-0B LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR LED (RIGHT) PIN PIN PIN PIN LED (LEFT) GREEN YELLOW FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M0(0)

000 Base-T Applications Stack XN, Through Hole Output Pins Pattern (With LED) SCHEMATICS Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs of Category UTP cable with 000Base-T full duplex applications Operating temperature 0 C to +0 C Stacked design for Hub and Switch applications UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRNEEA0-G00 MJRNEEA0-G00 MJRNEEA0-G00 MJRNEEA0-G00 MJR8NEEA0-G00 MJR8NEEA0-G00 CT: CT: TC TCA TC TCA TC MJN-0A M(0) E / E E / E E / E E / E E / E MJN-0A MJN-0A MJN-0A MJ8N-0A G00 G00 G00 G00 G00 CT: TCA E / E MJ8N-0A G00 Notes:. Ordering Information: MJRNEEA0-abbbc/MJRNEEA0-abbbc/MJR8NEEA0-abbbc. MJRNEEA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRNEEA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJR8NEEA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(g00/g00). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "E" = Orange & Green bi-color ( terminals type). For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. MATERIALS Housing Contact Pins PCB Pins Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08.

R UR E & E Magnetic Products Limited 000 Base-T Applications Stack XN, Through Hole Output Pins Pattern (With LED) MJN-0A MECHANICAL DIMENSIONS LEFT LED RIGHT LED UPPER PORT 0 8 9 (E&E PART NUMBER) (DATE) C US LOWER PORT 9 8 0 NOTE DETAI "A" PORT LED (LEFT LED).0 9. MAX. LED (RIGHT LED) PORT 8.0.00 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT 0. 0.8 PORT 0..8 Chip side 0.0.. 0.00.08 0.080.0 PORT DETAIL "A".00..0 9..000.0 0.0.. 0.00. PORT 8. 0.0 0X DIA.:.0 Cable side 0. 8.0.0.9 0.80. 0. X DIA.:.0 0.0 X DIA.:. PORT.00..0 8.9 Recommended hole pattern (viewed from component side) PORT 0.0.9 0.0.9 0.0... 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stack XN, Through Hole Output Pins Pattern (With LED) MJN-0A MECHANICAL DIMENSIONS LEFT LED RIGHT LED UPPER PORT 0 8 9 (E&E PART NUMBER) (DATE) C R US LOWER PORT 9 8 0 NOTE DETAI "A" PORT LED (LEFT LED).0 8.8 MAX. LED (RIGHT LED) PORT.0.00 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT 0. 0.8 PORT 0..8 Chip side 0.0.. 0.00.08 0.080.0 PORT.00 8.8.0. DETAIL "A".00..0 9..000.0 0.0.. 0.00. PORT. 0.0 X DIA.:.0 Cable side 0. 8.0.0.9 0.80. 0. X DIA.:.0 0.0 X DIA.:. PORT.00 09..0.8 Recommended hole pattern (viewed from component side) PORT 0.0.9 0.0.9 0.0... 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stack XN, Through Hole Output Pins Pattern (With LED) MJ8N-0A MECHANICAL DIMENSIONS LEFT LED RIGHT LED UPPER PORT 0 8 9 (E&E PART NUMBER) (DATE) C R US LOWER PORT 9 8 0 NOTE PORT LED (LEFT LED).0. MAX. PORT.0.00 MAX. LED (RIGHT LED) DETAI "A".00.9 MAX. REFERENCE OR GAUGE PLANE PORT 0. 0.8 PORT 0..8 Chip side 0.0.. 0.00.08 0.080.0 PORT.00 09..0 9..00 8.8.0. DETAIL "A".00..0 9..000.0 0.0.. 0.00. PORT. 0.0 08X DIA.:.0 0. 8.0.0.9 0.80. 0. X DIA.:.0 0.0 X DIA.:. Cable side PORT.00 09..0.8 Recommended hole pattern (viewed from component side) PORT 0.0.9 0.0.9 0.0... 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

000 Base-T Applications Stack XN, Through Hole Output Pins Pattern (With LED) SCHEMATICS (EACH PORT) G00 MDI_- 9 Primary 0 Shield 000pF/000V Secondary MDI_- MDI_+ 8 J J MDI_+ MDI_0- MDI_- MDI_+ MDI_0+ J J J J RJ- Chip Side RJ- Cable Side G00 Primary MDI_- 9 0 000pF/000V CT: Shield Secondary MDI_- MDI_+ 8 CT: J J MDI_+ MDI_0- MDI_- MDI_+ MDI_0+ CT: CT: J J J J RJ- Chip Side RJ- Cable Side M(0)

000 Base-T Applications Stack XN, Through Hole Output Pins Pattern (With LED) LEDS SCHEMATICS COLOR SCHEMATICS AND (EACH POLARITY PORT) POLARITY POLARITY COLOR COLOR PIN PIN PIN PIN ORANGE GREEN GREEN ORANGE Standard Color Green Orange LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 0 Typical..0 Forward Voltage (volt) Maximum.. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M(0)

000 Base-T Applications Stacked XN, Through Hole Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs of Category UTP cable with 000Base-T full duplex applications o o Operating temperature 0 C to +0 C Stacked design for Hub and Switch Applications UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration Platform Mechanical Package Schematic MJRNNNA0-G00 TC x MJN-0A G00 MJRNNNA0-G00 CT: TCA x MJN-0A G00 MJRNNNA0-G00 TC x MJN-0A G00 MJRNNNA0-G00 CT: TCA x MJN-0A G00 MJR8NNNA0-G00 TC x8 MJ8N-0A G00 MJR8NNNA0-G00 CT: TCA x8 MJ8N-0A G00 Notes:. Ordering Information: MJRNNNA0-abbbc/MJRNNNA0-abbbc/MJR8NNNA0-abbbc. MJRNNNA0 MJRNNNA0 MJR8NNNA0 abbb c = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Schematic code(g00/g00). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stacked XN, Through Hole Output Pins Pattern MJN-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 9. MAX. PORT 8.80 9.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 80X 0.0 DIA:.0.0 8.9.00..0 9. PORT PORT 8.000.0. 0.00. 0.0.. 0.80. 0. X DIA:.0 0.0 X DIA:. 0.0.9 0 8 9 9 8 0 PORT PORT.00..0 8.9 Recommended hole pattern viewed from component side 0.0.9 0.0.9 0.0... 0.0. Chip side Cable side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stacked XN, Through Hole Output Pins Pattern MJN-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 8.8 MAX. PORT.80 9.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 0XDIA: PORT 0.0.0.0 8.8.00 8.8.0..00..0 9. PORT.000.0. 0.00. 0.0.. 0.80. 0. XDIA:.0 0.0 XDIA:. 0.0.9 PORT 0 8 9 9 8 0.00 8.8.0 8.8 PORT 0.0.9 0.0... 0.0.9 0.0. Chip side Cable side Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stacked XN, Through Hole Output Pins Pattern MJ8N-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0. MAX. PORT.80 9.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT 0. 0.80 PORT 0..8 0XDIA: PORT 0.0.0.0.8.00 09..0 9..00 8.8.0..00..0 9. PORT.000.0 Chip side. 0.00. 0.0.. 0.80. 0. XDIA:.0 0.0 XDIA:. 0.0.9 PORT 0 8 9 9 8 0.00 09..0.8 PORT 0.0.9 0.0. Cable side.. 0.0.9 0.0. Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

000 Base-T Applications Stacked XN, Through Hole Output Pins Pattern SCHEMATICS(EACH PORT) G00 Primary MDI_- 9 0 Shield 000pF/000V Secondary MDI_- MDI_+ 8 J J MDI_+ MDI_- J J MDI_+ J MDI_0- MDI_0+ J RJ- Chip Side RJ- Cable Side G00 MDI_- 9 Primary 0 000pF/000V CT: Shield Secondary MDI_- MDI_+ 8 CT: J J MDI_+ MDI_- MDI_+ CT: J J J MDI_0- MDI_0+ CT: J RJ- Chip Side RJ- Cable Side Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M(0)

000 Base-T Applications Stacked XN, Through Hole Output Pins Pattern M(0)

000 Base-T Applications Stacked X, Through Hole Vertical-row of Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 000VDC isolation voltage Enhanced performance on EMI suppression with metal shield Support pairs fo Category UTP cable with 000Base-T full duplex applications o o Operating temperature 0 C to +0 C Stacked x design for Hub and Switch Applications RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 000 Hipot (VDC) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRNEEA-G08 CT: TCA E / E MJN-0A G08 Notes:. Ordering Information: MJRNEEA-abbbc. MJRNEEA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(g08). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "E" = Orange & Green bi-color ( terminals type). For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. M0(0)

000 Base-T Applications Stacked X, Through Hole Vertical-row of Output Pins Pattern MJN-0A MECHANICAL DIMENSIONS (E&E P/N) (DATE) NOTE LED (LEFT) LED (RIGHT) 0..8.0.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE 0..8 0. 0.80 0.. 0.00.0 0.0.0 0.0.0 Cable side X DIA: 0.0. 0.80. X DIA: 0..0 0.9. PITCH. PITCH. 0.00. 0.90. 0.8.9 8 9 9 8 Chip side UPPER PORT 0 0 LOWER PORT X DIA: 0.0 0.89 0.80. 0.80.9 Recommended hole pattern viewed from component side 0.080.0 Pin configuration viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M0(0)

000 Base-T Applications Stacked X, Through Hole Vertical-row of Output Pins Pattern SCHEMATICS G08 Primary MDI_0+ MDI_+ MDI_+ MDI_- MDI_- MDI_- MDI_+ MDI_0- MDI_CT /// RJ- Chip Side 8 9 000pF/000V CT: 0.uF CT: 0.uF CT: 0.uF CT: 0.uF Shield Secondary RJ- Cable Side J J J J J J 0 ORANGE LEDS COLOR AND POLARITY POLARITY POLARITY COLOR COLOR PIN PIN PIN PIN 0 GREEN GREEN ORANGE Standard Color Green Orange LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 0 Typical..0 Forward Voltage (volt) Maximum.. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M0(0)

000 Base-T Applications Stacked X, Through Hole Vertical-row of Output Pins Pattern M0(0)

000 Base-T Applications Stacked XN, Through Hole Vertical-row Of Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support pairs of Category UTP cable with 000Base-T full duplex applications o o Operating temperature 0 C to +0 C Stacked design for Hub and Switch Applications UL 8 listed RoHS compliant 0.-00MHz Insertion Loss (db Max) 00-MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk 0.-0MHz 0-00MHz 0.-00MHz 0.-00MHz.0. 8.0-0Log(F/80).0-0Log(F/0) 00 Hipot (Vrms) PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration Platform Mechanical Package Schematic MJRNNNA0G CT x MJN-0A+0 G MJRNNNA0G CT x MJN-0A+0 G MJR8NNNA0G CT x8 MJ8N-0A+0 G Notes:. Ordering Information: MJRNNNA0abbbc/MJRNNNA0abbbc/MJR8NNNA0abbbc. MJRNNNA0 MJRNNNA0 MJR8NNNA0 abbb c = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Schematic code(g). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M9(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stacked XN, Through Hole Vertical-row Of Output Pins Pattern MJN-0A+0 MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 9. MAX. PORT 8.80 9.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 0.0.9 0. 9.0.00 0.9.00 0...9.00. 0.90.99 0.00.0 9 0 8 0 8 9 X DIA: 0.0. PORT 80X DIA: 0.0.0 PORT 8 0.0. 0.80. Chip side Cable side. 0..9 0.8.0 0.0.9 PORT X DIA: 0..0 PORT.00. Recommended hole pattern viewed from component side 0.80. 0.0.0 0.00. 0.0.9 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M9(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stacked XN, Through Hole Vertical-row Of Output Pins Pattern MJN-0A+0 MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 8.8 MAX. PORT.80 9.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 0.0.9 0. 9.0.0 8.8.00 8.8..90.0..00 0.9.00 0...9.00. 0.90.99 0.00.0 9 0 8 0 8 9 9X DIA: 0.0. PORT 0X DIA: 0.0.0 PORT Chip side 0.0. 0.80. Cable side. 0..9 0.8.0 0.0.9 PORT.00 8.8 X DIA: 0..0 PORT Recommended hole pattern viewed from component side 0.80. 0.0.0 0.00. 0.0.9 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M9(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stacked XN, Through Hole Vertical-row Of Output Pins Pattern MJ8N-0A+0 MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0. MAX. PORT.80 9.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side 0. 9.0.0 0.8.800 9.. 9.8.0 8..0 8.8.00 8.8..90.0..00 0.9.00 0...9.00. 0.90.99 0.00.0 X DIA: 0.0. PORT 0X DIA: 0.0.0 PORT 0.0.9 9 0 8 0 8 9 0.0. 0.80.. 0..9 0.8.0 Cable side 0.0.9 PORT X DIA: 0..0 PORT.00 09. Recommended hole pattern viewed from component side 0.80. 0.0.0 0.00. 0.0.9 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M9(0)

000 Base-T Applications Stacked XN, Through Hole Vertical-row Of Output Pins Pattern SCHEMATICS(EACH PORT) G Primary MDI_0+ MDI_0-0.uF Shield Secondary MDI_+ MDI_- 0.uF J J MDI_+ MDI_- 0.uF J J MDI_+ MDI_- 8 0.uF J J VCC GND 9 0 RJ- Chip Side 000pF/000V RJ- Cable Side Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M9(0)

000 Base-T Applications Stacked XN, Through Hole Vertical-row Of Output Pins Pattern M9(0)

000 Base-T Applications XN Stacked, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) Magnetic Integrated Connector Modules Compliant with IEEE80.af standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80.af 0mA balanced DC line current capability Designed for Power over Ethernet (PoE) enabled Switch / Router / Hub applications Enhanced performance on EMI suppression with metal shield o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss Crosstalk 0.-0MHz 0-00MHz 0.-00MHz Hipot (Vrms)..0 0.0 0.0 00 PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration Platform Mechanical Package Schematic MJRNNNA-E0 CT: TCA x MJN-0A E0 MJRNNNA-E0 CT: TCA x MJN-0A E0 MJR8NNNA-E0 CT: TCA x8 MJ8N-0A E0 Notes:. Ordering Information: MJRNNNA-abbbbc/MJRNNNA-abbbbc/MJR8NNNA-abbbbc. MJRNNNA MJRNNNA MJR8NNNA abbbb c = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Schematic code(e0). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. "F" represents the test frequency specified in MHz.. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M8(0)

UR E & E Magnetic Products Limited 000 Base-T Applications XN Stacked, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) MJN-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 9. MAX. PORT 8.80. MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 PORT.00 0.9 0.90.99..9 0. 9.0 88X DIA: 0.0.0 PORT 8 X DIA: 0.0. 0.9. 0.8 9.9 0.0.9 9 8 8 9 0.0..0.8 Chip side 0.00.. 0.8.0 0.0.9 PORT.00. X DIA: 0..0 PORT Recommended hole pattern viewed from component side 0.80. 0.0.0 0.00. 0.0.9 0.0. Cable side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M8(0)

UR E & E Magnetic Products Limited 000 Base-T Applications XN Stacked, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) MJN-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 8.8 MAX. PORT.80. MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8.0 8.8.00 0.9 0.90.99..90..9 0. 9.0 PORT X DIA: 0.0.0 PORT X DIA: 0.0. 0.9. 0.8 9.9 0.0.9 9 8 8 9 0.0..0.8 Chip side 0.00.. 0.8.0 0.0.9 PORT X DIA: 0..0 PORT.00 8.8 0.80. 0.0.0 0.00. 0.0.9 0.0. Cable side Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M8(0)

UR E & E Magnetic Products Limited 000 Base-T Applications XN Stacked, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) MJ8N-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0. MAX. PORT.80. MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8.0 0.8.0 8.8.00 0.9 0.90.99 0.8 9.9. 9.8..90..9 0. 9.0 PORT Chip side X DIA: 0.0.0 PORT X DIA: 0.0. 0.9. 9 8 8 9 0.0..0.8 0.0.9. 0.00. 0.8.0 0.0.9 PORT X DIA: 0..0 PORT.00 09. Recommended hole pattern viewed from component side 0.0.9 0.0.0 0.00. 0.80. 0.0. Cable side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M8(0)

000 Base-T Applications XN Stacked, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) E0 Primary SCHEMATICS(EACH PAIR PORT) Shield MDI_+ MDI_- 8 MDI_+ MDI_0- MDI_0+ MDI_- MDI_+ MDI_- 9 CT: CT: CT: CT: nf/00vdc nf/00vdc nf/00vdc nf/00vdc Secondary J J J J J J Upper Port Vcc+ Vcc- Vcc- Vcc+ 000pF/000V 000pF/000V J MDI_+ 9 MDI_- MDI_+ 8 CT: CT: nf/00vdc nf/00vdc J J J J Lower Port MDI_- MDI_0+ MDI_0- MDI_+ MDI_- CT: CT: nf/00vdc nf/00vdc J RJ- Cable Side RJ- Chip Side Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M8(0)

000 Base-T Applications XN Stacked, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) M8(0)

000 Base-T Applications Stack XN, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) Magnetic Integrated Connector Modules Compliant with IEEE80.af standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. 0mA balanced DC line current capability Designed for Power over Ethernet (PoE) enabled Switch / Router / Hub applications Enhanced performance on EMI suppression with metal shield o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss Crosstalk 0.-0MHz 0-00MHz 0.-00MHz Hipot (Vrms)..0 0.0 0.0 00 PART NUMBER TABLE Part Number Turn Ratio ( %) (Chip : Cable) Configuration LED (Left / Right) Mechanical Package Schematic MJRNDDA-E0 CT: TCA D / D MJN-0B E0 MJRNDDA-E0 CT: TCA D / D MJN-0B E0 MJR8NDDA-E0 CT: TCA D / D MJ8N-0B E0 Notes:. Ordering Information: MJRNDDA-abbbbc/MJRNDDA-abbbbc/MJR8NDDA-abbbbc. MJRNDDA = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). MJRNDDA = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). MJR8NDDA = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). abbbb = Schematic code(e0). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer.. LEDs (Left / Right) : "D" = Orange & Green bi-color ( terminals type). For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stack XN, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) MJN-0B MECHANICAL DIMENSIONS 0. 0.8 X 0..8 LEFT SIDE LED PINS RIGHT SIDE LED PINS LOWER PORT PoE PINS UPPER PORT PoE PINS NOTE (E&E PART NUMBER) (DATE) C R US LOWER PORT SIGNAL PINS 9 8 8 9 UPPER PORT SIGNAL PINS PORT LED (LEFT).0 9. MAX. LED (RIGHT) PORT 8 DETAIL "A".80. MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 PORT Chip side.00 0.9 0.90.99..9 0. 9.0 DETAIL "A" 0X DIA: 0.0.0 PORT 8 X DIA: 0.0.. 9..0.0 0.9..0.8 0.0. Cable side 0.8 9.9 0.0.9. 0.00. 0.8.0 0.0.9 PORT X DIA: 0..0 PORT Recommended hole pattern viewed from component side.00. 0.80. 0.0.9 0.0.0 0.0. 0.00. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

000 Base-T Applications Stack XN, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) MJN-0B MECHANICAL DIMENSIONS 0. 0.8 X 0..8 LEFT SIDE LED PINS RIGHT SIDE LED PINS LOWER PORT PoE PINS UPPER PORT PoE PINS NOTE (E&E PART NUMBER) (DATE) C R UR US LOWER PORT SIGNAL PINS 9 8 8 9 UPPER PORT SIGNAL PINS PORT LED (LEFT).0 8.8 MAX. LED (RIGHT) PORT DETAIL "A".80. MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side.0 8.8.00 0.9 0.90.99..90..9 0. 9.0 DETAIL "A" PORT X DIA: 0.0.0 PORT X DIA: 0.0.. 9..0.0 0.9..0.8 0.0. Cable side 0.8 9.9 0.0.9. 0.00. 0.8.0 0.0.9 PORT X DIA: 0..0 PORT.00 8.8 Recommended hole pattern viewed from component side 0.80. 0.0.9 0.0.0 0.0. 0.00. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

UR E & E Magnetic Products Limited 000 Base-T Applications Stack XN, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) MJ8N-0B MECHANICAL DIMENSIONS 0. 0.8 X 0..8 LEFT SIDE LED PINS RIGHT SIDE LED PINS LOWER PORT PoE PINS UPPER PORT PoE PINS NOTE (E&E PART NUMBER) (DATE) C R US LOWER PORT SIGNAL PINS 9 8 8 9 UPPER PORT SIGNAL PINS PORT LED (LEFT) LED (RIGHT).0. MAX. PORT DETAIL "A".80. MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side.0 0.8.0 8.8.00 0.9 0.90.99. 9.8..90..9 0. 9.0 DETAIL "A" PORT 08X DIA: 0.0.0 PORT X DIA: 0.0.. 9..0.0 0.9..0.8 0.0. Cable side 0.8 9.9 0.0.9. 0.00. 0.8.0 0.0.9 PORT X DIA: 0..0 PORT.00 09. Recommended hole pattern viewed from component side 0.80. 0.0.9 0.0.0 0.0. 0.00. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. M(0)

000 Base-T Applications Stack XN, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) E0 SCHEMATICS (EACH PAIR PORT) Primary Shield MDI_+ MDI_- 8 MDI_+ MDI_0- MDI_0+ MDI_- MDI_+ MDI_- 9 CT: CT: CT: CT: nf/00vdc nf/00vdc nf/00vdc nf/00vdc Secondary J J J J J J Upper Port Vcc+ Vcc- Vcc- Vcc+ 000pF/000V 000pF/000V J MDI_+ 9 MDI_- MDI_+ 8 CT: CT: nf/00vdc nf/00vdc J J J J Lower Port MDI_- MDI_0+ MDI_0- MDI_+ MDI_- CT: CT: nf/00vdc nf/00vdc J RJ- Cable Side RJ- Chip Side Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. M(0)

000 Base-T Applications Stack XN, Through Hole Vertical-row Of Output Pins Pattern (With PoE Feature) M(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern Magnetic Integrated Connector Modules SCHEMATICS Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz Part Number GENERAL ELECTRICAL SPECIFICATION @ C Return Loss PART NUMBER TABLE Turn Ratio (Chip : Cable) ( %) Configuration Tx Rx Tx Rx Notes:. Ordering Information: MJRUGYA-abbbc/MJRUGYA-abbbc. CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 MJRUGYA-H0 MJRUGYA-H0G MJRUGYA-H0H MJRUGYA-H0Y MJRUGYA-HD MJRUGYA-H0 MJRUGYA-K0Y MJRUGYA-KD MJRUNNA0-H0 MJRUNNA0-H0G MJRUNNA0-H0H MJRUNNA0-H0Y MJRUNNA0-HD MJRUNNA0-H0 MJRUNNA0-K0Y CT: CT: CT: TCA TC TCA TC TC TCA TC TC LED (Left / Right) Mechanical Package Hipot (Vrms) Schematic CT: TCA CT MU-0B H0. Schematic H0G, H0Y, HD, K0Y, KD are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. Operating temperature: -0 C to +8 C. MJ00(0) CT TC TC TC TC TC TC TC MU-0B MU-0B MU-0B MU-0B H0G H0H H0Y HD CT:. TCA CT MU-0B H0 G / Y G / Y G / Y G / Y MU-0A MU-0A MU-0A MU-0A H0 H0G H0H H0Y TC TC G / Y MU-0A HD CT:. TCA CT G / Y MU-0A H0 TC TC G / Y MU-0A K0Y TC TC G / Y MU-0A KD TC TC MU-0B K0Y MJRUNNA0-KD TC TC MU-0B KD MJRUGYA MJRUNNA0 Abbb c. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited. = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Schematic code(h0/h0g/h0h/h0y/hd/h0/k0y/kd). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).

0/00 Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern MU-0A NOTE LED (LEFT) C R (E&E P/N) (DATE) UR US 0.0. MAX. MECHANICAL DIMENSIONS Chip side 0.0 8X DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 DIA: 0.0 X.0 Cable side LED (RIGHT) 8 9 0 0.. 0.0. Recommended hole pattern viewed from component side 0.8. MAX. 0.0. 0.0 8.89. 0.00. 0.0.. 0.00.. 0.80. 0.0.0 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 MU-0B NOTE C R (E&E P/N) (DATE) UR US Chip side 0.0 8X DIA: 0.89 0.0 X DIA:. DIA: 0. X.0 Cable side 8 0.0. 0.0. 0.0 8.89. 0.00. 0.00.. 0.0. 0.0.0 0.0. MAX. Recommended hole pattern viewed from component side 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern H0 SCHEMATICS Shield Primary CT: Secondary 8 Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V H0G Shield 000pF/000V Primary Secondary 8 RJ- Chip Side Tx-Side Rx-Side J J J J J J RJ- Cable Side H0H Shield 000pF/000V Primary CT: Secondary 8 RJ- Chip Side Tx-Side Rx-Side J J J J J J RJ- Cable Side MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern SCHEMATICS H0Y / K0Y Shield Primary Secondary 8 Tx-Side J J J J J J RJ- Chip Side 000pF/000V Rx-Side RJ- Cable Side HD / KD Shield Primary Secondary 8 Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V H0 Shield Primary CT:. Secondary 8 Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern LEDS COLOR AND POLARITY MU-0A LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR LED (RIGHT) PIN PIN PIN 9 PIN 0 9 0 LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. Notes:. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Output Pins Pattern MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (With LED) Magnetic Integrated Connector Modules SCHEMATICS Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRUGYA-HK TC TC G / Y MU-0A HK MJRUGYA-HU 8 Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Tx Configuration Rx LED (Left / Right) Mechanical Package Schematic CT: TCA CT G / Y MU-0A HU MJRUGYA-KK TC TC G / Y MU-0A KK Notes:. Ordering Information: MJRUGYA-abbbc. MJRUGYA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(hk/hu). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow. For different LED color requirements, please contact E&E Magnetic Products Limited.. Schematic HK, KK are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. 8. Operating temperature: -0 C to +8 C. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (With LED) MU-0A C R (E&E P/N) (DATE) UR US MECHANICAL DIMENSIONS Chip side 0.0 X DIA:.0 X 0.0 DIA: 0.89 0. X DIA:.0 0 9 8 0.080.0. 0.0.8 0.00 0. 0.00. 0.08. 0.09. NOTE LED (LEFT) 0.0. MAX. 0.0 X DIA:. Cable side LED (RIGHT) 0.00.0 0.0. Recommended hole pattern viewed from component side.0.8 MAX. 0..8 REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 0. 0.80 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. LED (RIGHT) LEDS COLOR AND POLARITY MU-0A LED (LEFT) LED (RIGHT) 8 COLOR POLARITY POLARITY COLOR PIN 0 PIN 9 PIN 8 PIN 9 GREEN YELLOW LED (LEFT) 0 Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (With LED) HK / KK SCHEMATICS Shield Primary Tx-Side Secondary J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V HU Shield Primary CT: Tx-Side Secondary J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (With LED) MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (Without LED) Magnetic Integrated Connector Modules SCHEMATICS Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRUNNA-HK MJRUNNA-HU 8 PART NUMBER TABLE Turn Ratio (Chip : Cable) ( %) Configuration Tx Rx Tx Rx LED (Left / Right) Mechanical Package Schematic TC TC MU-0A HK CT: TCA CT MU-0A HU MJRUNNA-KK TC TC MU-0A KK Notes:. Ordering Information: MJRUNNA-abbbc. MJRUNNA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(hk/hu/kk). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : " " = None.. Schematic HK, KK are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. 8. Operating temperature: -0 C to +8 C. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (Without LED) MU-0A MECHANICAL DIMENSIONS Chip side 0.00 0. 0.080.0 0.00. C R (E&E P/N) (DATE) UR US X DIA: X DIA: 0.0 0.89 0..0 0.0.8 NOTE X DIA: 0.0. Cable side 0.00.0 0.0. Recommended hole pattern viewed from component side 0..8 0.0. MAX. 0.9.00 MAX. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 0. 0.80 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (Without LED) HK / KK SCHEMATICS Shield Primary Tx-Side Secondary J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V HU Shield Primary CT: Tx-Side Secondary J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (Without LED) MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (With PoE Feature) SCHEMATICS Magnetic Integrated Connector Modules Compliant with IEEE80.af standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80.af 0mA balanced DC line current capability Designed for Power over Ethernet (PoE) enabled Switch / Router / Hub applications Enhanced performance on EMI suppression with metal shield o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz..0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRUNNA8-VB0 MJRUGYA8-VB0 Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Tx TS TS Configuration Rx TS TS LED (Left / Right) Mechanical Package MU-09A Schematic VB0 G / Y MU-09B VB0 Notes:. Ordering Information: MJRUNNA8-abbbbc/MJRUGYA8-abbbbc. MJRUNNA8 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRUGYA8 = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). abbbb = Schematic code(vb0). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "S" = Shared Common-mode choke. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. MJ0(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (With PoE Feature) MU-09A UR MECHANICAL DIMENSIONS Chip side 0X DIA: 0.0 0 8 R 0.89 C US 9 E&E P/N X DIA: 0.0. (DATE) X DIA: 0..0 0.0 + 0.00. 0.0 0. + 0.00.0 0.0 X 0.09 + 0.00. 0.0. 0.0. 0.0.0 NOTE Cable side 0.0. 0.0. 0.0 MAX.. Recommended hole pattern viewed from component side 0.8 MAX.. 0. MAX..0 REFERENCE OR GAUGE PLANE 0. 0.80 0..8 MU-09B NOTE LED (LEFT) 0.0 MAX.. UR Chip side 0.0 0X DIA: 0 8 R 0.89 C US 9 0.0 E&E P/N X DIA:. (DATE) 0. X DIA:.0 0.0 X DIA:.0 Cable side LED (RIGHT) 0.0. 0.. 0.0. Recommended hole pattern viewed from component side 0.8 MAX.. 0.0 + 0.00. 0.0 0. + 0.00.0 0.0 X 0.09 + 0.00. 0.0. 0.0. 0.80.. 0.0.0 0. MAX..0 REFERENCE OR GAUGE PLANE 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

VB0 TXCT RX+ E & E Magnetic Products Limited Primary TX+ TX- SCHEMATICS Tx-Side 0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (With PoE Feature) Secondary J J RX- RXCT Rx-Side 0.uF/00VDC 0.uF/00VDC J J PWR- 8 PWR+ J J SPARE- 0 SPARE+ 9 RJ- Chip Side 000pF/000V RJ- Cable Side LED (RIGHT) MU-09B LEDS COLOR AND POLARITY LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN PIN PIN PIN LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ0(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Up Straight-row Output Pins Pattern (With PoE Feature) MJ0(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL With 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C Symmetrical TX and RX channels which is suitable for Auto MDI/MDIX application UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Part Number MJRDGYA0-H0Y MJRDGYA0-HD MJRDGYA0-HF MJRDGYA0-K0Y MJRDGYA0-KD MJRDGYA-H0Y MJRDGYA-HD MJRDGYA-HF MJRDGYA-K0Y MJRDGYA-KD MJRDNNA0-H0Y MJRDNNA0-HD MJRDNNA0-HF MJRDNNA0-K0Y MJRDNNA0-KD PART NUMBER TABLE Turn Ratio (Chip : Cable) ( %) Configuration Tx Rx Tx Rx TC TC TC TC TC TC TC TC LED (Left / Right) G / Y G / Y G / Y G / Y Mechanical Package MD-0A MD-0A TC TC G / Y MD-0A TC TC G / Y MD-0A TC TC G / Y MD-0A TC TC G / Y MD-0B MD-0B MD-0B TC TC G / Y MD-0B TC TC G / Y MD-0B TC TC MD-0C TC TC MD-0C TC TC MD-0C TC TC MD-0C TC TC MD-0C Notes:. Ordering Information: MJRDGYA0-abbbc/MJRDGYA-abbbc/MJRDNNA0-abbbc. MJRDGYA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRDGYA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRDNNA0 = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(h0y/hd/hf/k0y/kd). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ;. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. Operating temperature: -0 C to +8 C. Hipot (Vrms) Schematic MJ0(0) H0Y HD HF K0Y KD H0Y HD HF K0Y KD H0Y HD HF K0Y KD

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) MD-0A NOTE C R (E&E P/N) (DATE) 0.0. MAX. UR US MECHANICAL DIMENSIONS Chip side 8X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 Cable side 8 9 0 Recommended hole pattern viewed from component side 0.8. MAX. 0... 0.0. 0.0.0 0.0. 0.0. 0.0 8.89 0.00.. 0.0.0 0. 8.8 0.. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 LED (LEFT) LED (RIGHT) 0. 0.80 MD-0B NOTE C R (E&E P/N) (DATE) UR US Chip side 8X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 Cable side 0 9 8 Recommended hole pattern viewed from component side 0... 0.0. 0..8 0.98. 0.98. 0.0 8.89 0.00.. 0.0.0 0.9.90 0.0. 0.0. 0.0. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE LED (LEFT) LED (RIGHT) 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) MD-0C C R (E&E P/N) (DATE) UR US MECHANICAL DIMENSIONS Chip side 8X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 8 0... 0.0. 0.0 8.89 0.00.. 0.0.0 Cable side NOTE 0.0. 0.0. 0.0. MAX. Recommended hole pattern viewed from component side 0.8. MAX. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 0. 0.80 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. LEDS COLOR AND POLARITY MD-0A LED (LEFT) LED (RIGHT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN 9 PIN 0 PIN PIN LED (LEFT) 0 GREEN YELLOW 9 MD-0B LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN 9 PIN 0 PIN PIN LED (RIGHT) LED (LEFT) 0 GREEN YELLOW 9 MJ0(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) H0Y / K0Y SCHEMATICS Shield 000pF/000V Primary Secondary 8 J Rx-Side J J J J J RJ- Chip Side Tx-Side RJ- Cable Side HD / KD Shield 000pF/000V Primary Secondary 8 Rx-Side J J J J J J RJ- Chip Side Tx-Side RJ- Cable Side HF Shield 000pF/000V Primary Secondary 8 Rx-Side J J J J J J RJ- Chip Side Tx-Side RJ- Cable Side MJ0(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. Notes:. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ0(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) MJ0(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRDGYA0-H0 MJRDGYA0-HY MJRDGYA-H0 MJRDGYA-HY MJRDNNA0-H0 MJRDNNA0-HY Turn Ratio (Chip : Cable) ( %) Tx Rx CT: CT: CT: PART NUMBER TABLE Tx TCA TCA TCA Configuration Rx CT CT CT LED (Left / Right) G / Y G / Y G / Y Mechanical Package MD-0A MD-0A CT: TCA CT G / Y MD-0B MD-0B CT: TCA CT MD-0C CT: TCA CT MD-0C Schematic H0 HY H0 HY H0 HY Notes:. Ordering Information: MJRDGYA0-abbbc/MJRDGYA-abbbc/MJRDNNA0-abbbc. MJRDGYA0 MJRDGYA MJRDNNA0 abbb c. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " "= None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional. = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Schematic code(h0/hy). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. MJ00(08)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) MD-0A NOTE C R (E&E P/N) (DATE) 0.0. MAX. UR US MECHANICAL DIMENSIONS Chip side 8X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 Cable side 8 9 0 Recommended hole pattern viewed from component side 0.8. MAX. 0... 0.0. 0.0.0 0.0. 0.0. 0.0 8.89 0.00.. 0.0.0 0. 8.8 0.. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 LED (LEFT) LED (RIGHT) 0. 0.80 MD-0B NOTE C R (E&E P/N) (DATE) UR US Chip side 8X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 Cable side 0 9 8 Recommended hole pattern viewed from component side 0... 0.0. 0..8 0.98. 0.98. 0.0 8.89 0.00.. 0.0.0 0.9.90 0.0. 0.0. 0.0. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE LED (LEFT) LED (RIGHT) 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ00(08)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) MD-0C C R (E&E P/N) (DATE) UR US MECHANICAL DIMENSIONS Chip side 8X 0.0 DIA: 0.89 0.0 X DIA:. 0. X DIA:.0 8 0... 0.0. 0.0 8.89 0.00.. 0.0.0 Cable side NOTE 0.0. 0.0. 0.0. MAX. Recommended hole pattern viewed from component side 0.8. MAX. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 0. 0.80 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. LEDS COLOR AND POLARITY MD-0A LED (LEFT) LED (RIGHT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN 9 PIN 0 PIN PIN LED (LEFT) 0 GREEN YELLOW 9 MD-0B LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN 9 PIN 0 PIN PIN LED (RIGHT) LED (LEFT) 0 GREEN YELLOW 9 MJ00(08)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Output Pins Pattern ( cores Designs) Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. H0 000pF/000V SCHEMATICS Shield Primary Secondary 8 J Rx-Side J J CT: J J J RJ- Chip Side Tx-Side RJ- Cable Side HY Shield Primary 8 CT: Rx-Side Secondary J J J J J J RJ- Chip Side Tx-Side 000pF/000V RJ- Cable Side FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ00(08)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL With 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C Symmetrical TX and RX channels which is suitable for Auto MDI/MDIX application UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRDNNA-HK PART NUMBER TABLE Turn Ratio (Chip : Cable) ( %) Configuration Tx Rx Tx Rx LED (Left / Right) TC TC Mechanical Package MD-0A Schematic MJRDNNA-KK TC TC MD-0A KK Notes:. Ordering Information: MJRDNNA-abbbc. MJRDNNA abbb c. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ;. LEDs (Left / Right) : " " = None.. Panel tabs are optional. = Schematic code(hk).. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available.. Operating temperature: -0 C to +8 C. = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging). HK MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern MD-0A C R UR US MECHANICAL SCHEMATICS DIMENSIONS Chip side X 0.0 DIA: 0.89 0.00 0. 0.00. 0.080.0 0.0.8 (E&E P/N) (DATE) 0. X DIA:.0 NOTE 0.0 X DIA:. Cable side Recommended hole pattern viewed from component side 0.00.0 0..8 0.. 0.0. MAX. 0.90. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern HK / KK SCHEMATICS Shield 000pF/000V Primary Secondary Rx-Side J J J J J J RJ- Chip Side Tx-Side RJ- Cable Side FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern MJ00(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern (With PoE Feature) SCHEMATICS Magnetic Integrated Connector Modules Compliant with IEEE80.af standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. 0mA balanced DC line current capability Designed for Power over Ethernet (PoE) enabled switch / router / hub applications Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz..0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Tx Configuration Rx LED (Left / Right) Mechanical Package Schematic MJRDGYA9-VB MJRDNNA9-VB TS TS TS TS G / Y MD-0A MD-0B VB VB Notes:. Ordering Information: MJRDGYA9-aabbbc/MJRDNNA9-aabbbc. MJRDGYA9 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRDNNA9 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). aabbb = Schematic code(vb). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = isolation transformer ; "S" = Shared Common-mode choke. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " "= None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. MJ08(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern (With PoE Feature) MD-0A MECHANICAL DIMENSIONS 0XDIA: 0.0 0.89 0.080.0 0.00 0. NOTE C R E&E P/N (DATE) UR US Chip side Cable side 0.8. 0.. 0.00.0 0.0 X DIA:. 0. X DIA:.0 0.0 X DIA:.0 0.98. 0.. 8 9 0 0.98. Recommended hole pattern viewed from component side 0.00. 0.8 9.8 0.8. 0.0.0 0..8 0.9.90 0.0. MAX..00 0.8 MAX. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 LED (LEFT) LED (RIGHT) 0. 0.80 MD-0B 0XDIA: 0.0 0.89 0.080.0 0.00 0. NOTE C R E&E P/N (DATE) UR US Chip side Cable side 0.8. 0.. 0.00.0 0.0 X DIA:. 0. X DIA:.0 8 9 0 0.0.0 0.00. 0.8 9.8 0.8. 0.. Recommended hole pattern viewed from component side 0.0. MAX..00 0.8 MAX. REFERENCE OR GAUGE PLANE 0..0 MAX. 0..8 0. 0.80 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ08(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern (With PoE Feature) SCHEMATICS VB0 SPARE- 0 Primary SPARE+ 9 Shield 000pF/000V Secondary PWR- 8 PWR+ RX- RXCT 0.uF/00VDC 0.uF/00VDC J J J J RX+ TX- TXCT Rx-Side J J TX+ RJ- Chip Side Tx-Side RJ- Cable Side LED (RIGHT) MD-0A LEDS COLOR AND POLARITY LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN PIN PIN PIN LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ08(0)

0/00 Base-T Applications Single Port, Through Hole, Tab Down Straight-row Output Pins Pattern (With PoE Feature) MJ08(0)

0/00 Base-T Applications Single Port, SMD, Tab Down SCHEMATICS Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL With 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRSNNA-HL MJRSNNA-H9 Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Tx TC CT Configuration Rx TC CT LED (Left / Right) Mechanical Package MS-0A MS-0A MJRSNNA-HV CT: TCA CT MS-0A Schematic HL H9 HV Notes:. Ordering Information: MJRSNNA-abbbc. MJRSNNA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(hl/h9/hv). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : " " = None.. Schematic HL and H9 are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. MJ08(0)

0/00 Base-T Applications Single Port, SMD, Tab Down HL SCHEMATICS Shield 000pF/000V Primary RJ- Chip Side Rx-Side Tx-Side Secondary J J J J J J RJ- Cable Side H9 Shield 000pF/000V Primary Secondary RJ- Chip Side Rx-Side Tx-Side J J J J J J RJ- Cable Side HV Shield 000pF/000V Primary Secondary RJ- Chip Side CT: Tx-Side Rx-Side J J J J J J RJ- Cable Side MJ08(0)

0/00 Base-T Applications Single Port, SMD, Tab Down MS-0A MECHANICAL DIMENSIONS 0.0. 0.00. 0.080.0 (E&E P/N) (DATE) Chip side 0. X DIA:.0 0.080.0 0..9 NOTE 0.0. MAX. 0.0.0 Cable side 0.080.0 Recommended hole pattern viewed from component side 0.90.88 MAX.. 0.00.0 0.0.9 0.0.88 MAX. REFERENCE OR GAUGE PLANE 0.00. 0. 9. 0.0.8 0. 0.80 0.0. 0.00 [0.0] 8 SURFACES All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ08(0)

0/00 Base-T Applications Single Port, SMD, Tab Down MJ08(0)

0/00 Base-T Applications Single Port, Through Hole Vertical Type Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRVGYA0-H0 MJRVGYA0-H0Y MJRVGYA0-K0Y MJRVNNA0-H0 MJRVNNA0-H0Y MJRVNNA0-K0Y 8 8 Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Tx TC Configuration Rx TC LED (Left / Right) Mechanical Package CT: TCA CT G / Y MV-0B TC TC G / Y MV-0B CT: TC TCA TC TC CT TC G / Y MV-0B MV-0A MV-0A MV-0A Schematic H0 H0Y K0Y H0 H0Y K0Y Notes:. Ordering Information: MJRVGYA0-abbbc/MJRVNNA0-abbbc. MJRVGYA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRVNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(h0/h0y/k0y). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Schematic H0Y and K0Y are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. 8. Operating temperature: -0 C to +8 C. MJ09(0)

0/00 Base-T Applications Single Port, Through Hole Vertical Type MV-0A 0..0 MAX. 0.0. MAX. MECHANICAL DIMENSIONS 0.0 X DIA:. 0.0 8X DIA: 0.89 0.0.0 8 0.0.. 0.00. 0.0. 0.0 8.89 0.00. 0. X DIA:.0 0.0. Recommended hole pattern (viewed from component side) 0.0 8.89 0.0. NOTE 0.8.9 MAX. C R (E&E P/N) (DATE) UR US REFERENCE OR GAUGE PLANE 0..8 0..8 MV-0B LED (LEFT) 0..0 MAX. 0.0. MAX. LED (RIGHT) 0.0 X DIA:. 0.0 X DIA: 0.89 0.0.0 8 0 9 0.0.. 0.00. 0.0. 0.0 8.89 0.00. 0. X DIA:.0 0.0. Recommended hole pattern (viewed from component side) 0.0 8.89 0.0.8 0.0. NOTE 0.8.9 MAX. C R (E&E P/N) (DATE) UR US REFERENCE OR GAUGE PLANE 0..8 0..8 All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. 8 MJ09(0)

0/00 Base-T Applications Single Port, Through Hole Vertical Type H0 SCHEMATICS Shield Primary CT: Secondary Tx-Side J J J J J 8 J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V H0Y / K0Y Shield Primary Secondary 8 Tx-Side J J J J J J RJ- Chip Side 000pF/000V Rx-Side RJ- Cable Side 9 MJ09(0)

0/00 Base-T Applications Single Port, Through Hole Vertical Type LEDS COLOR AND POLARITY MV-0B LED (LEFT) LED (RIGHT) LED (RIGHT) 9 0 COLOR POLARITY POLARITY COLOR PIN PIN PIN 9 PIN 0 LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Forward Voltage (volt) Typical Wavelength (nm) Typical. 90. Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. 0 MJ09(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C Gang x design for Hub and Switch Applications UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRUGYA-H0G MJRUGYA-H0 MJRUGYA-H0Y MJRUGYA-K0Y MJRUNNA0-H0G MJRUNNA0-H0 MJRUNNA0-H0Y MJRUNNA0-K0Y 8 8 Turn Ratio (Chip : Cable) ( %) Tx Rx CT: CT: PART NUMBER TABLE Tx TC TCA TC TC TCA Configuration Rx TC CT TC TC CT LED (Left / Right) G / Y G / Y G / Y Mechanical Package MU-0A MU-0A MU-0A TC TC G / Y MU-0A MU-0B MU-0B TC TC MU-0B TC TC MU-0B Schematic H0G H0 H0Y K0Y H0G H0 H0Y K0Y Notes:. Ordering Information: MJRUGYA-abbbc/MJRUNNA0-abbbc. MJRUGYA MJRUNNA0 abbb c. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Schematic H0G, H0Y and K0Y are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. 8. Operating temperature: -0 C to +8 C. = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Schematic code(h0g/h0/h0y/k0y). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging). MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern MU-0A MECHANICAL SCHEMATICS DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT LED (LEFT).0 9. MAX. LED (RIGHT) PORT 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 0.0.9. 0.00. 0.0. 0.0 8.89 0.00. 0.0.0. 8X DIA: 0.0.0 0.0 X DIA:. 0. X DIA:.0 0.0 0.8 0.0.0 0.8. 8 PORT PORT PORT PORT 9 0 0.0.9 0.0.9 0.. 0.0.0 0.08.0 0.. 0.0 0.9 0..8 Chip side Cable side.00..0 8.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern MU-0B MECHANICAL SCHEMATICS DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 9. MAX. PORT 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 0.0.9. 0.00. 0.0. 0.0 8.89 0.00. 0.0.0. X DIA: X DIA: X DIA: 0.0.0 0.0. 0..0 8 PORT PORT PORT PORT Chip side.00..0 8.9 Recommended hole pattern viewed from component side Cable side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern H0G SCHEMATICS Shield 000pF/000V Primary Secondary Rx-Side J J J J J J 8 RJ- Chip Side Tx-Side RJ- Cable Side H0 Shield Primary CT: Secondary 8 Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V H0Y / K0Y Shield Primary Secondary 8 Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V 8 MJ0(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern LEDS COLOR AND POLARITY MU-0A LED (LEFT) LED (RIGHT) LED (RIGHT) 9 0 COLOR POLARITY POLARITY COLOR PIN PIN PIN 9 PIN 0 LED (LEFT) GREEN YELLOW Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Forward Voltage (volt) Typical Wavelength (nm) Typical. 90. Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. 9 MJ0(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Up Output Pins Pattern 0 MJ0(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C Gang x design for Hub and Switch Applications UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRUNNA-HK MJRUNNA-HU MJRUNNA-H8 MJRUNNA-KK 8 PART NUMBER TABLE Turn Ratio (Chip : Cable) ( %) Configuration Tx Rx Tx Rx CT: TC TCA TC CT LED (Left / Right) Mechanical Package MU-0A Schematic HK MU-0A HU CT CT MU-0A H8 TC TC MU-0A KK Notes:. Ordering Information: MJRUNNA-abbbc. MJRUNNA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(hk/hu/h8/kk). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : " " = None.. Schematic HK, H8 and KK are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. 8. Operating temperature: -0 C to +8 C. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins Pattern MU-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE.0 9. MAX. 0.9.00 MAX. REFERENCE OR GAUGE PLANE 0..0 MAX. 0. 0.80 0..8 PORT PORT 0.0.9.0. 0.00 0. 0.080.0 0.0 X DIA..0 0.00. 0.0.8 0..8 Chip side 0. X DIA..0 0.0 X DIA.. PORT PORT PORT PORT Cable side.80.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins Pattern HK / KK SCHEMATICS Shield Primary Secondary Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V HU Shield Primary CT: Secondary Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V H8 Primary Shield Secondary Tx-Side J J J J J J RJ- Chip Side 000pF/000V Rx-Side RJ- Cable Side MJ0(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Up Straight-row Output Pins Pattern Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ0(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C Gang x design for Hub and Switch Applications UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRDGYA-H MJRDGYA-H0 MJRDGYA-HD MJRDGYA-KD MJRDNNA0-H MJRDNNA0-H0 MJRDNNA0-HD MJRDNNA0-KD 8 8 Turn Ratio (Chip : Cable) ( %) Tx Rx CT: CT: CT: CT: PART NUMBER TABLE Tx TCA TCA TC TCA TCA Configuration Rx CT CT TC CT CT LED (Left / Right) G / Y G / Y G / Y Mechanical Package MD-0A MD-0A MD-0A TC TC G / Y MD-0A MD-0C MD-0C TC TC MD-0C TC TC MD-0C Schematic H H0 HD KD H H0 HD KD Notes:. Ordering Information: MJRDGYA-abbbc/MJRDNNA0-abbbc. MJRDGYA MJRDNNA0 abbb c. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow ; " " = None. For different LED color requirements, please contact E&E Magnetic Products Limited.. Schematic HD, KD are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. 8. Operating temperature: -0 C to +8 C. = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). = Schematic code(h/h0/hd/kd). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging). MJ009(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern MD-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE.0 9. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 PORT LED (LEFT) LED (RIGHT) PORT 0.0 8.89 0.00. 8X 0.0 DIA..0 0.0 X DIA.. 0. X DIA..0 0.0.9. 0.00. 9 8 PORT PORT PORT PORT 0.00. 0.0. 0..8 0.9.90. 0.0.0 Chip side Cable side. 0.0.9 0.09 0. 0.08 0...0 8.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ009(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern MD-0C MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE.0 9. MAX. 0.8. MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 PORT PORT 0.0 8.89 0.00. X 0.0 DIA..0 0.0 X DIA.. 0. X DIA..0 0.0.9. 0.00. 8.00. PORT PORT PORT PORT 0.0.. 0.0.0 Chip side Cable side.0 8.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ009(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern H SCHEMATICS Shield Primary 8 CT: Secondary J J Tx-Side J J J J RJ- Chip Side Rx-Side RJ- Cable Side 000pF/000V H0 Shield 000pF/000V Primary Secondary 8 J Rx-Side J J CT: J J J RJ- Chip Side Tx-Side RJ- Cable Side HD / KD Shield 000pF/000V Primary Secondary 8 J Rx-Side J J J J J RJ- Chip Side Tx-Side RJ- Cable Side MJ009(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern LEDS COLOR AND POLARITY MD-0A LED (LEFT) LED (RIGHT) POLARITY POLARITY COLOR COLOR PIN 9 PIN 0 PIN PIN LED (RIGHT) LED (LEFT) 0 GREEN YELLOW 9 Standard Color Green Yellow LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 90 Typical.. Forward Voltage (volt) Maximum.. Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ009(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Down Output Pins Pattern MJ009(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Down Straight-row Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C Gang x design for Hub and Switch Applications Symmetrical TX and RX channels which is suitable for Auto MDI/MDIX application UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Configuration LED (Left / Right) MJRDNNA-HK TC TC Tx Rx Mechanical Package MD-0A Schematic MJRDNNA-KK TC TC MD-0A KK HK Notes:. Ordering Information: MJRDNNA-abbbc. MJRDNNA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(hk/kk). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ;. LEDs (Left / Right) : " " = None.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available.. Operating temperature: -0 C to +8 C. MJ00(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Gang X, Through Hole, Tab Down Straight-row Output Pins Pattern MD-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE.0 9. MAX. 0.9.00 MAX. 0..0 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 PORT PORT 0.0.9.0. 0.00 0. 0.080.0 0.0 X DIA..0 0.00. 0.0.8 0..8 Chip side 0. X DIA..0 0.0 X DIA.. PORT PORT PORT PORT Cable side.80.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ00(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Down Straight-row Output Pins Pattern HK / KK SCHEMATICS Shield 000pF/000V Primary Secondary RJ- Chip Side Rx-Side Tx-Side J J J J J J RJ- Cable Side Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ00(0)

0/00 Base-T Applications Gang X, Through Hole, Tab Down Straight-row Output Pins Pattern MJ00(0)

0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs o o Operating temperature 0 C to +0 C Stacked design for Hub and Switch Applications Symmetrical TX and RX channels which is suitable for Auto MDI/MDIX application UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Configuration Tx Rx LED (Left / Right) Mechanical Package Schematic MJRNEEA0-HN TC TC E / E MJN-0A HN MJRNEEA0-HN TC TC E / E MJN-0A HN MJR8NEEA0-HN TC TC E / E MJ8N-0A HN Notes:. Ordering Information: MJRNEEA0-abbbc/MJRNEEA0-abbbc/MJR8NEEA0-abbbc. MJRNEEA0 MJRNEEA0 MJR8NEEA0 abbb c. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; 'C" = Common-mode choke ;. LEDs (Left / Right) : "E" = Orange & Green bi-color ( terminals type). For different LED color requirements, please contact E&E Magnetic Products Limited.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. Housing Contact Pins PCB Pins = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Product Type (xxrxxxxxxxxx, R respresents Internal Control Code). = Schematic code(hn). = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging). MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. MJ0(0)

0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern MJN-0A (E&E PART NUMBER) (DATE) MECHANICAL DIMENSIONS C R UR US LED (LEFT) UPPER PORT LED (RIGHT) 9 0 0 9 8 NOTE LOWER PORT 8 PORT LED (LEFT).0 9. MAX. LED (RIGHT) PORT 8 DETAIL "A".0.00 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 PORT PORT PORT. 0.080.0 0.0. 0.00.08 DETAIL "A".00.0.00 8.0 0.90.. 0.00. 0.00 0.. 88X 0.0 DIA:.0 PORT 8 0.80. 0. 8. 0.0.9 PORT PORT.. Chip side 0. X DIA:.0 0.0 X DIA:..00. 0.0.9 0.0.9 0.0. 0.0. Cable side.0 8.9 Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern MJN-0A MECHANICAL DIMENSIONS LED (RIGHT) LED (LEFT) 9 0 0 9 (E&E PART NUMBER) (DATE) C R US UPPER PORT 8 LOWER PORT 8 NOTE DETAIL "A" PORT LED (LEFT) LED (RIGHT).0 8.8 MAX. PORT.0.00 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE 0. 0.80 0..8 PORT PORT 0.0.. 0.00.08 0.080.0 PORT.0 80.0.00.0 DETAIL "A".00.0.00 8.0 0.90.. 0.00. PORT 0.00 0.. 0.0 XDIA:.0 Chip side 0. 8. 0.0.9 0.80. PORT PORT.. 0. X DIA:.0 0.0 X DIA:..00 8.8.0 8.8 Recommended hole pattern viewed from component side 0.0.9 0.0.9 0.0. 0.0. Cable side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern MJ8N-0A MECHANICAL DIMENSIONS LED (RIGHT) LED (LEFT) 9 0 0 9 (E&E PART NUMBER) (DATE) C R US UPPER PORT 8 LOWER PORT 8 NOTE DETAIL "A" PORT LED (LEFT) LED (RIGHT).0. MAX. PORT.0.00 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT 0. 0.80 PORT 0..8 0.0.. 0.00.08 0.080.0 PORT.0 0.9.00 9.98.0 80.0.00.0 DETAIL "A".00.0.00 8.0 0.90.. 0.00. Chip side 0.00 0.. 0.0 XDIA:.0 PORT 0. 8.0.0.9 0.80. 0. X DIA:.0 0.0 X DIA:. PORT.00 09..0.8 PORT 0.0.9.. 0.0.9 0.0 0.0.. Cable side Recommended hole pattern viewed from component side All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern HN SCHEMATICS SCHEMATICS (EACH PORT) Shield 000pF/000V 8 Primary RJ- Chip Side Tx-Side Rx-Side Secondary J J J J J J RJ- Cable Side 9 LEDS SCHEMATICS COLOR SCHEMATICS AND (EACH POLARITY PORT) POLARITY POLARITY COLOR COLOR PIN 0 PIN 9 PIN 0 PIN GREEN 0 ORANGE GREEN ORANGE Standard Color Green Orange LED SPECIFICATION @ C, FORWARD CURRENT = 0mA Typical Wavelength (nm) 0 Typical..0 Forward Voltage (volt) Maximum.. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ0(0)

0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern MJ0(0)

0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern Magnetic Integrated Connector Modules SCHEMATICS Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield Support various 0/00 transceiver ICs Operating temperature 0 C to +0 C Stacked design for Hub and Switch applications UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number MJRNNNA0-H0Y MJRNNNA0-HG MJRNNNA0-HH MJRNNNA0-H0Y MJRNNNA0-HG MJRNNNA0-HH MJR8NNNA0-H0Y MJR8NNNA0-HG MJR8NNNA0-HH Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Tx TC TC TC TC TC Configuration Rx TC TC TC TC TC LED (Left / Right) Mechanical Package MJN-0A MJN-0A CT: TCA CT MJN-0A MJN-0A MJN-0A CT: TCA CT MJN-0A MJ8N-0A TC TC MJ8N-0A CT: TCA CT MJ8N-0A Schematic H0Y HG HH H0Y HG HH H0Y HG HH Notes:. Ordering Information: MJRNNNA0-abbbc/MJRNNNA0-abbbc/MJR8NNNA0-abbbc. MJRNNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRNNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJR8NNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(h0y/hg/hh). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : " " = None.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern MJN-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 9. MAX. PORT 8.0 8.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side PORT 0.0 X DIA.:.0.0 8.9 PORT 8.00.0.00 8.0 0.90. 0.00 0.. 0.00.. 8 0. X DIA.:.0 0.0 X DIA.:. 0.09 0.80.. Cable side PORT 8.00..0 8.9 PORT 0.0.9 0.09.9 0.0... 0.8.8 Recommended hole pattern (viewed from component side) All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern MJN-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 8.8 MAX. PORT.0 8.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side PORT 0.0 9X DIA.:.0.0 8.8.0 80.0.00.0 PORT.00.0.00 8.0 0.90. 0.00 0.. 0.00.. 8 0. X DIA.:.0 0.0 X DIA.:. 0.09 0.80.. Cable side PORT 8.00 8.8.0 8.8 PORT 0.0.9 0.09.9 0.0... 0.8.8 Recommended hole pattern (viewed from component side) All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern MJ8N-0A MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT PORT.0. MAX..0 8.9 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side PORT 0.0 8X DIA.:.0.0.8.0 0.9.00 9.98.0 80.0.00.0 PORT.00.0.00 8.0 0.90. 0.00 0.. 0.00.. 8 0. X DIA.:.0 0.0 X DIA.:. 0.09 0.80.. Cable side PORT 8.00 09..0.8 PORT 0.0.9 0.09.9 0.0... 0.8.8 Recommended hole pattern (viewed from component side) All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern H0Y SCHEMATICS (EACH PORT) Shield 000pF/000V Primary Secondary 8 Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side HG 000pF/000V Shield Primary Secondary 8 Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side HH Shield 000pF/000V Primary CT: Secondary 8 Tx-Side J J J J J J RJ- Chip Side Rx-Side RJ- Cable Side MJ0(0)

0/00 Base-T Applications Stack XN, Through Hole Output Pins Pattern Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ0(0)

0/00 Base-T Applications XN Stacked, Though Hole Output Pins Pattern (With PoE feature and TVS device) Magnetic Integrated Connector Modules Compliant with IEEE80.af standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. 0mA balanced DC line current capability Enhanced performance on EMI suppression with metal shield o o Operating temperature 0 C to +0 C Featured with Transient Voltage Suppression (TVS) Designed for Power over Ethernet (PoE) enabled Switch / Router / Hub applications UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0 0.0 0.0 00 Hipot (Vrms) Part Number MJRNNNA0-V00U MJRNNNA0-V00U MJR8NNNA0-V00U Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Tx Configuration Rx Platform Mechanical Package Schematic TS TS x MJN-0A V00U TS TS x MJN-0A TS TS x8 MJ8N-0A V00U V00U Notes:. Ordering Information: MJRNNNA0-abbbbc/MJRNNNA0-abbbbc/MJR8NNNA0-abbbbc. MJRNNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRNNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJR8NNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbbb = Schematic code(v00u). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "S" = Shared Common-mode choke. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. MJ09(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications XN Stacked, Though Hole Output Pins Pattern (With PoE feature and TVS device) MJN-0A MECHANICAL DIMENSIONS E&E PART NUMBER (DATE) C R US NOTE PORT.0 9. MAX. PORT 8.0 MAX. 8.9.00.9 MAX. REFERENCE OR GUAGE PLANE PORT PORT 0. 0.80 0..8 Chip side PORT X 0.0 DIA:.0.0 8.9.00.0.00 8.0 PORT 8 0.90.. 0.00. 0.00 0.. 9 8 0.80. 0.0.9 PORT 9 8 PORT.. 0.0.9 0.0 Cable side 0. XDIA:.0 0.0 XDIA:..00..0 8.9 Recommended hole pattern Viewed from component side 0.0.9 0.0.. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. /F Block A, 9 Tokwawan Road, Kowloon, Hong Kong Tel: (8) Tel: (8) 9 888 Fax: (8) 9 0 8 MJ09(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications XN Stacked, Though Hole Output Pins Pattern (With PoE feature and TVS device) MJN-0A MECHANICAL DIMENSIONS E&E PART NUMBER (DATE) C R US NOTE PORT.0 8.8 MAX. PORT.0 MAX. 8.9.00.9 MAX. REFERENCE OR GUAGE PLANE PORT PORT 0. 0.80 0..8.0 8.8 Chip side 8XDIA: PORT 0.0.0.0 80.0.00.0.00.0.00 8.0 PORT 0.90.. 0.00. 0.00 0.. 9 8 0.80. 0.0.9 PORT 9 8 PORT.. 0.0.9 0.0 Cable side 0. X DIA:.0 0.0 X DIA:..00 8.8.0 8.8 Recommended hole pattern Viewed from component side 0.0.9 0.0.. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. 9 MJ09(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications XN Stacked, Though Hole Output Pins Pattern (With PoE feature and TVS device) MJ8N-0A MECHANICAL DIMENSIONS E&E PART NUMBER (DATE) C R US NOTE PORT.0. MAX. PORT.0 MAX. 8.9.00.9 MAX. REFERENCE OR GUAGE PLANE PORT PORT 0. 0.80 0..8 Chip side PORT.0.8.0 0.9.00 9.98.0 80.0.00.0 PORT.00.0.00 8.0 0.90.. 0.00. 0.00 0.. 0.0 X DIA:.0 9 8 0.0.9 0.80. 8 9 PORT PORT.. 0.0.9 0.0 0. X DIA:.0 0.0 X DIA:. Cable side.00 09..0.8 Recommended hole pattern Viewed from component side 0.0.9 0.0.. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. 0 MJ09(0)

0/00 Base-T Applications XN Stacked, Though Hole Output Pins Pattern (With PoE feature and TVS device) SCHEMATICS (EACH PORT) V00U PWR- Primary 9 PWR+ 8 Shield 000pF/000V nf/00vdc nf/00vdc Secondary J CT RD+ TD- RD- TD+ RJ- Chip Side Tx-Side Rx-Side TVS TVS J J J J J RJ- Cable Side Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ09(0)

0/00 Base-T Applications XN Stacked, Though Hole Output Pins Pattern (With PoE feature and TVS device) MJ09(0)

0/00 Base-T Applications XN Stacked, Though Hole Vertical-row of Output Pins Pattern (With PoE feature) Magnetic Integrated Connector Modules Compliant with IEEE80.af standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. 0mA balanced DC line current capability Enhanced performance on EMI suppression with metal shield o o Operating temperature 0 C to +0 C Symmetrical TX and RX channels which is suitable for Auto MDI/MDIX application Designed for Power over Ethernet (PoE) enabled switch / router / hub applications UL 8 listed RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0-80MHz 0.-00MHz 0.-00MHz Hipot (Vrms)..0 0.0.0 0.0 00 Part Number MJRNNNA0V0N MJRNNNA0V0N MJR8NNNA0V0N Turn Ratio (Chip : Cable) ( %) Tx Rx PART NUMBER TABLE Tx Configuration Rx Platform Mechanical Package Schematic CT CT x MJN-0A+0 V0N CT CT x MJN-0A+0 V0N CT CT x8 MJ8N-0A+0 V0N Notes:. Ordering Information: MJRNNNA0abbbc/MJRNNNA0abbbc/MJR8NNNA0abbbc. MJRNNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJRNNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MJR8NNNA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(v0n). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications XN Stacked, Though Hole Vertical-row of Output Pins Pattern (With PoE feature) MJN-0A+0 MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 9. MAX. PORT 8.0 8.0 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side Cable side 0.0.9. 0. 9.0.00 0.9.00 0...9.00. 0.90.99 0.00.0 0 0 9 8 8 9 0.0. X DIA: 0.0. PORT X DIA: 0.0.0 PORT 8 0.80. 0..0 0..9 0.00. 0.0.9 PORT X DIA: 0..0 PORT.00. Recommended hole pattern (viewed from component side) 0.80. 0.0.0 0.00. 0.0.9 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications XN Stacked, Though Hole Vertical-row of Output Pins Pattern (With PoE feature) MJN-0A+0 MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0 8.8 MAX. PORT.0 8.0 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side Cable side 0.0.9. 0. 9.0.0 8.8.00 8.8..90.0..00 0.9.00 0...9.00. 0.90.99 0.00.0 0 0 9 8 8 9 9X DIA: 0.0. PORT 8X DIA: 0.0.0 PORT 0.80. 0.0. 0..0 0..9 0.00. 0.0.9 PORT X DIA: 0..0 PORT.00 8.8 Recommended hole pattern (viewed from component side) 0.80. 0.0.9 0.0.0 0.00. 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

UR E & E Magnetic Products Limited 0/00 Base-T Applications XN Stacked, Though Hole Vertical-row of Output Pins Pattern (With PoE feature) MJ8N-0A+0 MECHANICAL DIMENSIONS (E&E PART NUMBER) (DATE) C R US NOTE PORT.0. MAX. PORT.0 8.0 MAX..00.9 MAX. REFERENCE OR GAUGE PLANE PORT PORT 0. 0.80 0..8 Chip side 0.0.9. 0. 9.0.0 0.8.800 9.. 9.8.0 8..0 8.8.00 8.8..90.0..00 0.9.00 0...9.00. 0.90.99 0.00.0 0 0 9 8 8 9 X DIA: 0.0. PORT X DIA: 0.0.0 PORT 0.80. 0.0. 0..0 0..9 0.00. Cable side 0.0.9 PORT X DIA: 0..0 PORT.00 09. Recommended hole pattern (viewed from component side) 0.0.0 0.00. 0.80. 0.0.9 0.0. All dimensions are specified in inch with higher precedence in inch. mm Unless otherwise specified, all tolerances are 0.00. 0. MJ0(0)

0/00 Base-T Applications XN Stacked, Though Hole Vertical-row of Output Pins Pattern (With PoE feature) V0N Primary CMCT 0 SCHEMATICS Shield 000pF/000V Secondary RD+ RD- TD+ 9 8 nf /00V nf /00V J J TD- J Tx-Side J J PWR+ J PWR- RJ- Chip Side Rx-Side RJ- Cable Side Housing Contact Pins PCB Pins MATERIALS Consist of thermoset & thermoplastic materials, all of them are UL 9-V0 rated. Phosphor bronze, plated with nickel under-plating and hard gold over contact area. Copper wire which meets solderability requirements per MIL-STD-0, method 08. FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER /F., Harbour View, No. Science Park East Avenue, Phase II, Hong Kong Science Park, Shatin, N.T. Hong Kong Email: eempl@eleceltek.com Website: http://www.eleceltek.com / www.eemagnetic.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 009, E & E Magnetic Products Limited. MJ0(0)

0/00 Base-T Applications XN Stacked, Though Hole Vertical-row of Output Pins Pattern (With PoE feature) MJ0(0)

0/00 Base-T Applications Combo Type, RJ- + USB Ports SCHEMATICS Magnetic Integrated Connector Modules Compliant with IEEE80. standard including 0 H OCL with 8mA DC Bias 00Vrms isolation voltage per IEEE80. Enhanced performance on EMI suppression with metal shield o o Operating temperature 0 C to +0 C RoHS compliant Insertion Loss (db Max) 0.-00MHz GENERAL ELECTRICAL SPECIFICATION @ C Return Loss CMRR Crosstalk -0MHz 0MHz 0MHz 0-80MHz MHz MHz 00MHz 0.-00MHz.0.0.0.0.0.0.0.0.0 00 Hipot (Vrms) Part Number PART NUMBER TABLE (WITHOUT PANEL TAB) Turn Ratio Configuration (Chip : Cable) ( %) LED Tx Rx Tx Rx (Left / Right) Mechanical Package Schematic MCRAGYA0-HV CT: TCA CT G / Y MCA-0A HV Part Number MCRAGYA-HU MCRAGYA-HE MCRAGYA-HK 8 PART NUMBER TABLE (WITH PANEL TABS) Turn Ratio Configuration (Chip : Cable) ( %) LED Tx Rx Tx Rx (Left / Right) Mechanical Package CT: TCA CT G / Y MCA-0A CT: TCA CT G / Y MCA-0A TC TC G / Y MCA-0A MCRAGYA-KK TC TC G / Y MCA-0A Schematic HU HE HK KK Notes:. Ordering Information: MCRAGYA0-abbbc/MCRAGYA-abbbc. MCRAGYA0 = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). MCRAGYA = Product Type (xxrxxxxxxxx, R respresents Internal Control Code). abbb = Schematic code(hv/hu/he/hk/kk). c = Packaging Code (No Code = NoN Tape and reel packaging, e.g. Tray Packaging).. For different electrical and mechanical specifications, please contact E&E Magnetic Products Limited.. Core location are counted from PCB (Chip) side to Cable (Media) side, where: "T" = Isolation transformer ; "C" = Common-mode choke ; "A" = Auto-transformer. LEDs (Left / Right) : "G" = Green ; "Y" = Yellow. For different LED color requirements, please contact E&E Magnetic Products Limited.. Schematic of HK, KK are suitable for Auto MDI/MDIX applications.. Panel tabs are optional.. All parts shown in this datasheet have gold plating thickness of 0 micro-inch (min.) over contact area. Advance options including 0 micro-inch (min.) and 0 micro-inch (min.) are also available. 8. Operating temperature: -0 C to +8 C. MJ0(0)

2024 © artsdocbox.com Privacy Policy | Terms of Service | Feedback