STEVAL-IDB00V STEVAL-IDB00V evaluation platform based on the BlueNRG- Data brief USB to serial bridge for providing I/O channel with the BlueNRG- device Jumper for measuring current for BlueNRG- only RoHS compliant Features Bluetooth SMART board based on the BlueNRG- Bluetooth low energy system on chip Associated BlueNRG- development kit SW package including firmware and documentation Up to + dbm available output power (at antenna connector) Excellent receiver sensitivity (- dbm) Very low power consumption:. ma RX and. ma TX at - dbm Bluetooth low energy v. compliant, supports master, slave and simultaneous master-and-slave roles Integrated balun which integrates a matching network and harmonics filter SMA connector for antenna or measuring equipment user LEDs user buttons D digital accelerometer and D digital gyroscope MEMS pressure sensor with embedded temperature sensor Battery holder JTAG debug connector Description The STEVAL-IDB00V is an evaluation platform based on the BlueNRG-, low power Bluetooth smart system on chip, compliant with the Bluetooth v. specification and supporting master, slave and simultaneous master-andslave roles. The STEVAL-IDB00V also provides a set of hardware resources for implementing a wide range of application scenarios: sensor data (accelerometer, pressure and temperature sensor), remote control (buttons and LEDs) and manage debug messages though USB virtual COM. Three power options are available (USB only, battery only, external power supply + USB) for high application development and testing flexibility. December 0 DocID0 Rev /0 For further information contact your local STMicroelectronics sales office www.st.com
STEVAL-IDB00V CN NC CN NC R 0_00 Figure : STEVAL-IDB00V arduino connectors R 0_00 ARDUINO CONNECTORS RESETN 0_00 R DIO TEST 0_00 R DIO R 0_00 DIO R 0_00 0_00 R ADC ADC R 0_00 Figure : STEVAL-IDB00V JTAG JTAG CN DIO R 0_00 0 DIO 0_00 R R 0_00 DIO0 R 0_00 DIO 0_00 R DIO R 0_00 DIO DIO R0 0_00 R 0_00 DIO R 0_00 NC CN R 0_00 RESETN DIO 0_00 R DIO R 0_00 DIO DIO0 R 0_00 R 0_00 DIO R0 0_00 DIO R 0_00 DIO R 0_00 NC GSPG000SG Male Connector x0 HDR straight DIO0 JTMS-SWTDIO JTCK-SWTCK DIO RESETN CN 0 0 SWD RS - ST Link:.0-.V, V tolerant IAR J-Link:.-.V, V tolerant GSPG00SG /0 DocID0 Rev
STEVAL-IDB00V Figure : STEVAL-IDB00V BlueNRG- DocID0 Rev /0
IO SDA SCL CS RE S SDA SA0 SPI_OUT SPI_CL K SPI_C S 0 Gnd Figure : STEVAL-IDB00V power management, sensors STEVAL-IDB00V LDSPUR USB_V C u_00 Vin N.C. Vout Vinh Gnd Bypass C BATT Battery holder U n_00 JP C.u_00 JP Jumper 0_00 R Jumper DL GREEN POWER MANAGEMENT SENSORs C.u_00 C 00 n_00 U C 00 n_00 IC_CLK IO SCL R 0_00 R 0K_00 LPSHB INT_DRDY CS C0 00 n_00 IC_DAT R 0_00 0K_00 R R 0_00 R 0_00 R 0_00 U LSMDS SPI_IN DIO R 0_00 R 0_00 SDO/SA0 NC SDx OCS SCx INT INT 0 C 00 n_00 C 00 n_00 GSPG0SG /0 DocID0 Rev
STEVAL-IDB00V Figure : STEVAL-IDB00V buttons and LEDs DocID0 Rev /0
RESE TN RX D SPI_CS SPI_CLK SPI_OUT SPI_IN PB 0 PA PA PA PA PA PB0 PB PB PB 0 PB VSS _ VSS_ PB PB BOOT0 PB PB PB PB PB PA PA 0 JTCK JTDI JTDO Figure : STEVAL-IDB00V micro STEVAL-IDB00V GSPG00SG MICRO C 0p_00 OSC_IN U MHz X R M_00 OSC_OUT VLCD OSC_IN OSC_OUT NRST A TXD 0 VLCD PC RTC_AF- W KUP PC-OSC_IN PC-OSC_OUT PH0-OSC_IN PH-OSC_OUT NRST VSSA A PA0- W KUP PA PA _ VSS_ PA PA PA PA0 PA PA PB PB PB PB 0 JTMS USBDP USBDM USART_RX USART_TX -SEL -SEL OE C DIO 0p_00 R 0K_00 NRST STMLCBU USART_RX JP USART_TX USART VLCD C C C 00 n_00 00 n_00 00 n_00 A C 00 n_00 C u_00 C0 00 n_00 C u_00 /0 DocID0 Rev
STEVAL-IDB00V Figure : STEVAL-IDB00V USB, level translator, JTAG for micro USB USB_V R USBDP 0_00 R USBDM 0_00 U I/O I/O VBUS I/O I/O USBLC-SC R NC DP DM C 00n_00 DM DP CN 0 Vcc D- D+ ID USB micro B LEVEL TRANSLATOR JTAG FOR MICRO TXD SPI_CS/RXD DIO R 0_00 R 0_00 R 0_00 0 U0 Vl I/OVl I/OVcc I/OVl I/OVcc I/OVl I/OVcc I/OVl I/OVcc Gnd STE Vcc I/OVcc I/OVl I/OVcc I/OVl I/OVcc I/OVl I/OVcc I/OVl OE 0 OE RXD TXD PB R0 0k_00 JTMS JTCK JTDO JTDI 0 CN CONN GSPG000SG DocID0 Rev /0
D S S D D S S D -SEL=-SEL=H => SPI CONNECTED TO THE BLUENRG- -SEL=-SEL=L => SPI NOT CONNECTEDTO THE BLUENRG- TP TP C 00n_00 TP Figure : STEVAL-IDB00V EEPROM SPI_CLK STG SPI_CLK R 0_00 SPI_CS/RXD SPI_OUT STEVAL-IDB00V SPI_CS R 0K_00 SPI_IN U R R 0K_00 SPI_IN 0_00 S S -SEL Vcc 0 -SEL -SEL -SEL R 0K_00 S S R R R 0_00 R0 0_00 R 0K_00 0K_00 SPI_OUT 0K_00 GSPG00SG /0 DocID0 Rev
STEVAL-IDB00V Revision history Table : Document revision history Date Version Changes -May-0 Initial release. -Dec-0 Updated board photo on the cover page. Revision history DocID0 Rev /0
STEVAL-IDB00V IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. 0 STMicroelectronics All rights reserved 0/0 DocID0 Rev
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STEVAL-IDB00V