STEVAL-IHM045V1. 3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM -nano) Description. Features

Similar documents
STEVAL-IHM038V1. BLDC ceiling fan controller based on the STM32 and SLLIMM-nano. Description. Features

STEVAL-IHM034V2. Dual motor control and PFC evaluation board featuring the STM32F103 and STGIPS20C60. Features

STEVAL-MKI126V2. MEMS microphone system evaluation board based on the STA321MPL and MP34DB01. Description. Features

STEVAL-MKI126V3. STSmartVoice demonstration board based on MP34DT01. Description. Features

EVAL-RHF1009A. EVAL-RHF1009A product evaluation board. Description. Features

STEVAL-IHM021V W, 3-phase inverter based on the L6390 and UltraFASTmesh MOSFET for speed FOC of 3-phase PMSM motor drives. Features.

2 x 58 W high frequency ballast for T8 fluorescent tubes based on L6562A, L6569, and STL11NM60N in PowerFlat HV package

STEVAL-IHM025V1. 1 kw 3-phase motor control demonstration board featuring the IGBT SLLIMM STGIPL14K60. Features. Description

STEVAL-IHM043V1. 6-step BLDC sensorless driver board based on the STM32F051 and L6234. Features. Description

STEVAL-IHM024V W 3-phase inverter using the L6390 and STGDL6NC60DI for vector control. Features. Applications. Description

STEVAL-IHT005V2. Demonstration board with full 3.3 V ACS/Triac control using the STM32F100. Description. Features

Obsolete Product(s) - Obsolete Product(s)

STM32-PRIMER/LAB. Raisonance EvoPrimer-LAB to monitor STM32 applications and standalone STM32 Flash programming. Features

STEVAL-IFN003V1. PMSM FOC motor driver based on the L6230 and STM32F103. Features. Description

EVLHVLED815W8CV. 8 W - high power factor - constant voltage regulation based on HVLED815PF. Features. Description

STEVAL-ILH004V1. 70 W electronic ballast for metal halide lamp (HID) based on the L6382D5 and ST7FLITE49K2. Features. Description

SPC564A80CAL176 SPC564A70CAL176

STEVAL-ILL037V1. Demonstration board for the HVLED805 IC for LED power supply. Features. Description

EVAL6208Q. Stepper motor driver mounting the L6208Q. Features. Description

M24SR-DISCOVERY. Discovery kit for the M24SR series Dynamic NFC/RFID tag. Features

STEVAL-CCM003V1. Graphic panel with ZigBee features based on the STM32 and SPZBE260 module. Features. Description

STEVAL-ILH005V W electronic ballast for HID lamps based on the L6562A and ST7LITE39F2. Features. Description

Multi-channel LED driver with integrated boost controller for medium, large LCD panel backlight based on LED7708 and STM32F103C6T6A

EVALPM8803-FWD. EVALPM8803-FWD: IEEE802.3at compliant demonstration kit with synchronous active clamp forward PoE converter. Features.

Obsolete Product(s) - Obsolete Product(s)

STEVAL-ICB004V1. Advanced resistive touchscreen controller demonstration board based on the STMPE811. Features. Description

EVLHVLED815W10F. 10 W wide-range high power factor isolated LED driver based on HVLED815PF. Description. Features

March 2012 Doc ID Rev 1 1/4

STEVAL-SPBT2ATV2. USB Dongle for the Bluetooth class 2 SPBT2532C2.AT module. Features. Description

STEVAL-ISA121V1. Wide range single-output demonstration board based on the VIPER37LE. Features. Description

STEVAL-ILL029V1. Front panel demonstration board based on the STLED325 and STM8S. Features. Description

Obsolete Product(s) - Obsolete Product(s)

STEVAL-ILL015V1. High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32. Features. Description

STEVAL-ISB008V1. Standalone USB Li-Ion battery charger demonstration board based on the STw4102 and STM32F103C6. Features.

STEVAL-ILL043V1. High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings. Features.

STANC0. Stereo HD-PA digitally programmable active noise cancelling audio engine. Features. System. Input and output.

STEVAL-IHM008V1. BLDC & AC motor control Power board SEMITOP 2 1kW. Features. Applications

IEC compliant smart meter system for AMI applications based on STM32, ST7570 PLM, and STPMC1/STPMS1 chipset

Main components Proximity and ambient light sensing (ALS) module

STEVAL-CCH002V2. HDMI and video switches demonstration board. Features. Description

STEVAL-IME002V1. Multi-lead electrocardiogram (ECG) and body impedance demonstration board. Features. Description

STEVAL-IKR001V7D. Sub Ghz transceiver daughterboard with power amplifier based on the SPIRIT1. Features. Description

Obsolete Product(s) - Obsolete Product(s)

EVLHVLED815W10A. 10 W wide range non-isolated high power factor LED driver using HVLED815PF. Description. Features

Main components Proximity and ambient light sensing (ALS) module

ROBOT-M24LR16E-A. Evaluation board for the M24LR16E-R dual interface EEPROM. Features. Description

Order code Package Connection. SPDC400FC12M0.60 Open frame Comb. October 2007 Rev 1 1/9

Obsolete Product(s) - Obsolete Product(s)

STEVAL-CCA043V1. 25 Watt mono BTL class-d audio amplifier demonstration board based on the TDA7491MV. Features. Description

PRODUCT INFORMATION LETTER

Description. Table 1. Device summary. Order codes Temperature range [ C] Package Packing. LPS2HBTR -30 to +105 HLGA - 10L

Obsolete Product(s) - Obsolete Product(s)

UM0534 User manual. STEVAL-MKI014V1 demonstration kit for the LIS344ALH. Introduction

STEVAL-ILL019V1. 32 W offline RGGB LED driver with individual LED channel brightness regulation. Features. Description

AN3075 Application note

Order code Marking Package Packing. STA5630TR STA5630 VFQFPN32 Tape and reel STA5630ATR (1) September 2013 Doc ID Rev 4 1/8

STA3005. Dual-IF AM/FM digital radio receiver. Feature summary. Order codes

PRODUCT INFORMATION LETTER

Obsolete Product(s) - Obsolete Product(s)

STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description

STEVAL-ISA050V1. Monolithic VR for chipset and DDR2/3 demonstration board based on the PM6641. Features. Application. Description

STEVAL-TDR020V1. Portable UHF 2-way radio demonstration board based on the PD84006L-E. Features. Description

Main components Narrow-band OFDM power line networking PRIME compliant system-on-chip

AN2421 Application note

ST10F273M Errata sheet

Very low-noise, high-efficiency DC-DC conversion circuit

PRODUCT TERMINATION NOTIFICATION

L7208. Portable consumer electronics spindle and VCM motor controller. General features. Spindle driver. Description. VCM driver.

GM68020H. DisplayPort receiver. Features. Applications

IMPORTANT NOTICE. Company name - STMicroelectronics NV is replaced with ST-NXP Wireless.

GM60028H. DisplayPort transmitter. Features. Applications

EVAL6474PD. Stepper motor driver mounting the L6474 in a high power PowerSO package. Features. Description

STEVAL-TDR021V1. Demonstration board using the PD84008L-E for 900 MHz 2-way radio. Features. Description

Mechanical specification. October 2010 Doc ID Rev 1 1/10

TN0885 Technical note

STV6110A. 8PSK/QPSK low-power 3.3 V satellite tuner IC. Description. Features

M24LR04E-R, M24LR16E-R, M24LR64E-R Errata sheet

Obsolete Product(s) - Obsolete Product(s)

STEVAL-ILL031V1. Digital constant-current controller for LED driving based on the STM8S208x. Features. Description

STDP2500. Mobility DisplayPort (MyDP) to DP converter. Features. Applications

STV6417 R/C/Pr, G/C, B/Pb Switches + Filter. C, Y, CVBS/Y Switches + Filter. Audio Switches Volume Control AUDIO R SLOW BLANK

BAL-NRF01D3. 50 ohm balun transformer for 2G45 ISM matched Nordic s chipset: nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch. Features.

VT5365. Single-chip optical mouse sensor for wireless applications. Features. Applications. Technical specifications. Description.

GM69010H DisplayPort, HDMI, and component input receiver Features Applications

AN2415 Application note

Fully integrated stepper motor driver mounting the L6470 in a high power PowerSo package. May 2012 Doc ID Rev 2 1/12

IMPORTANT NOTICE. Company name - STMicroelectronics NV is replaced with ST-NXP Wireless.

STDP4020. DisplayPort receiver. Features. Applications

STW High voltage fast-switching NPN power transistor. Features. Application. Description

Obsolete Product(s) - Obsolete Product(s) UM0223 User manual STEVAL-IFS001V1 evaluation kit with MEMS Introduction

SPSGRF-868 / 915 SubGiga (868 or 915 MHz) programmable transceiver module Datasheet

ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32

PRODUCT/PROCESS CHANGE NOTIFICATION

FLI30x02 Single-chip analog TV processor Features Application

STDP2650 Advanced DisplayPort to HDMI converter Features Applications

STEVAL-ISA001V1. 6W Dual Output Supply using VIPer12A. Features. Blue angel. Applications

Obsolete Product(s) - Obsolete Product(s)

USBLC6-4SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

PRODUCT/PROCESS CHANGE NOTIFICATION

PRODUCT/PROCESS CHANGE NOTIFICATION

Transcription:

STEVALIHMV phase high voltage inverter power board for FOC based on the STGIPNHA (SLLIMM nano) Description Data brief Features Widerange input voltage ( Vac) Maximum power up to W at Vac input Based on the STGIPNHA SLLIMM nano AC motor drive Mounts the VIPer fixed frequency offline converter from the VIPer plus family Efficient DCDC power supply ( V,. V) DC bus voltage power supply connectors External V input Dedicated connector for interfacing with the various other ST evaluation boards Suitable for sinusoidal FOC drives Selectable single or threeshunt current reading topology with fast operational amplifier Configurable for direct motor current sampling from shunt resistors Hardware overcurrent detecting network Temperature sensor Hall sensor/quadrature encoder inputs RoHS compliant The STEVALIHMV system evaluation board is a phase inverter designed to perform field oriented control (FOC) of sinusoidalshaped back EMF PMSMs with or without sensors, with nominal power up to W. This flexible, highperformance design consists of a phase inverter bridge based on the STGIPNHA SLLIMM nano (small lowloss intelligent molded module) IPM, phase inverter, A / V very fast IGBT and the VIPer fixed frequency offline converter from the VIPer plus family. The system is specifically designed to achieve fast and accurate current feedback conditioning, thereby matching the requirements typical of highend applications such as field oriented motor control. The board is compatible with and Vac mains, and includes an auxiliary power supply stage with the VIPer to generate the V and the. V supply voltages required by the application. Through a dedicated connector, the board can be interfaced with the STMBEVAL, STMBEVAL, STMEEVAL, STMEVAL, STMGEVAL, STMCEVAL, STMGEVAL (STM microcontroller evaluation boards), STEVAL IHMV (high density dual motor control evaluation board based on the STMFZE microcontroller), STEVALIHMV (Dual motor drive control stage based on the STMFZG microcontroller) and the STEVALIHMV (Control stage based on the STMFCB microcontroller suitable for motor control). May DocID Rev / For further information contact your local STMicroelectronics sales office. www.st.com

Schematic diagrams STEVALIHMV Schematic diagrams Figure. STEVALIHMV circuit schematic ( of ) External opamp & comparator CIN pf V Vshunt_ R Vshunt CIN pf V Vshunt_ R Vshunt CIN pf V Vshunt_ R Vshunt UA TSVIPT CIN Curr_fdbk CIN R Curr_fdbk CIN R Curr_fdbk STMicroelectronics and/or its licensors do not warrant the accuracy or completeness of this specification or any information contained therein. STMicroelectronics and/or its licensors do not warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. STMicroelectronics and/or its licensors do not warrant that the design is production worthy. You should completely validate and test your design implementation to confirm the system functionality for your application. R CIN CIN CIN R k C R k.v.v.v Emergency R UC TSVIPT.nF V UA TSCDT C R.k C R.k C R.k UD TSVIPT R.k R R.k R R.k C nfv R.k UB TSVIPT R.k R.k UD TSCDT C.uF V R R R R.nF V R.k R k k R.nF V R k C C R k R k C C C C nfv ufv UB TSCDT ufv UC TSCDT ufv R C.uF V / DocID Rev

STEVALIHMV Schematic diagrams Figure. STEVALIHMV circuit schematic ( of ) Emergency PhaseU_H PhaseU_L PhaseV_H PhaseV_L PhaseW_H PhaseW_L Curr_fdbk Curr_fdbk Curr_fdbk Enc A/H Enc B/H Enc Z/H Bus Volt feedback WCurr_fdbk_ WCurr_fdbk_ WCurr_fdbk_ Temperature feedback A/H B/H Z/H R R R.k R.k R.k C Only for sensors Enc A/H Enc B/H Enc Z/H pf V R R J MOTOR_CONN R J Stripline m. x C pf V pf V R C DocID Rev /

Schematic diagrams STEVALIHMV Figure. STEVALIHMV circuit schematic ( of ) V C nf V PhaseU_L PhaseU_H PhaseV_L PhaseV_H PhaseW_L PhaseW_H U STGIPNHA LIN U Vboot U NC_ HIN U Vcc U NC_ LIN V HIN V Vcc V NC_ NC_ NC_ LIN W HIN W Vcc W NC_ P Vboot V U N U V Vboot W N V W N W C.uF V NU C.uF V Vshunt_ C.uF V NW Phase A Phase B Phase C Vshunt_ Curr_fdbk Vshunt_ Curr_fdbk Vshunt_ Curr_fdbk R R R R. Vshunt Vshunt R. Vshunt R. WCurr_fdbk_ WCurr_fdbk_ WCurr_fdbk_ Temperature feedback NTC R.k C nf V Sh Sh NTC k RS model C/ Placed near the IGBT bridge CON J RS Vshunt_ NU Vshunt_ Sh Sh model CON J Vshunt_ NW Vshunt_ MOTOR CON J Phase A Phase B Phase C Test points Emergency PhaseU_H PhaseU_L PhaseV_H PhaseV_L PhaseW_H PhaseW_L Temperature feedback Bus Volt feedback V Phase A Phase B Phase C TP TP TP TP TP TP TP TP TP TP TP TP TP TP TP / DocID Rev

STEVALIHMV Schematic diagrams Figure. STEVALIHMV circuit schematic ( of ) J NTC F A AC MAINS ohm V J J DC Bus Ext. V T J CON R k C nf V D STTHLA U DRAIN_ DRAIN_ DRAIN_ DRAIN_ DRAIN_ VIPerLS COMP FB LIM VDD D STTHRU D STTHRU D D C.uF V C nf V D STTHRU D STTHRU STPSMF STPSLMF D NWT R k R C nf C nf k.v.v R k R k R k C uf V C uf V V R k /W R k /W R.k C uf V D GREEN LED SMD R.k /W Bus Volt feedback C.nF V U Vin LDSTR Vout C uf.v DocID Rev /

Revision history STEVALIHMV Revision history Table. Document revision history Date Revision Changes May Initial release. / DocID Rev

STEVALIHMV Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. STMicroelectronics All rights reserved STMicroelectronics group of companies Australia Belgium Brazil Canada China Czech Republic Finland France Germany Hong Kong India Israel Italy Japan Malaysia Malta Morocco Philippines Singapore Spain Sweden Switzerland United Kingdom United States of America www.st.com DocID Rev /