AudiaEXPI-D & AudiaEXPO-D Digital Input & Output Expanders Operation Manual Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. (503) 641-7287 www.biamp.com an affiliate of Rauland Borg Corp.
blank print update September 7, 2005
AudiaEXPI-D & AudiaEXPO-D TABLE OF CONTENTS AudiaEXPI-D - front & rear panels AudiaEXPO-D - front & rear panels Encoder/Display Menus Application Specifications Block Diagrams Warranty CE Declaration Safety Information pg. 2 pg. 3 pg. 4 pg. 6 pg. 8 pg. 9 pg. 10 pg. 11 pgs. 12~14 INTRODUCTION AudiaEXPI-D is a digital input expander for AUDIA, the benchmark in digital audio systems for demanding professional sound installations. AudiaEXPI-D accepts eight channels of digital audio input and provides eight channels of digital audio output via CobraNet. AudiaEXPI-D can simply add inputs to a centralized system, or it can extend system boundaries by providing inputs in remote locations. AudiaEXPI-D is represented as a block in AUDIA software, for easy inclusion into any system design. AudiaEXPI-D may also be used to provide inputs to other CobraNet compliant systems or devices. AudiaEXPI-D features include: 4 digital input pairs on (xfmr coupled) SPDIF digital inputs on RCA (channels 1-2 & 3-4) TOSLINK digital inputs (channels 5-6 & 7-8) 8 channels of digital audio output via CobraNet Word Clock output on BNC connector rotary encoder with LCD for programming/setup logic inputs for recalling preset configurations included as block in AUDIA system design software may be used with any CobraNet compliant system CE marked and UL listed power source AudiaEXPO-D is a digital output expander for AUDIA, the benchmark in digital audio systems for demanding professional sound installations. AudiaEXPO-D accepts eight digital audio input signals via CobraNet and provides eight channels of digital audio output. AudiaEXPO-D can simply add outputs to a centralized system, or it can extend system boundaries by providing outputs in remote locations. AudiaEXPO-D is represented as a block in AUDIA software, for easy inclusion into any system design. AudiaEXPO-D may also be used to provide outputs from other CobraNet compliant systems or devices. AudiaEXPO-D features include: 8 channels of digital audio input via CobraNet 4 digital output pairs on (xfmr coupled) SPDIF digital outputs on RCA (channels 1-2 & 3-4) TOSLINK digital outputs (channels 5-6 & 7-8) Word Clock output on BNC connector rotary encoder with LCD for programming/setup logic inputs for recalling preset configurations included as block in AUDIA system design software may be used with any CobraNet compliant system CE marked and UL listed power source 1
an affiliate of Rauland-Borg Corp. MADE IN U.S.A. AudiaEXPI-D - Front & Rear Panels BIAMP SYSTEMS Rotary Encoder & LCD Display: This control and display are used for initial setup of the AudiaEXPI unit. When power is first applied to the unit, the display will cycle through a product description, followed by a title screen. Press the control to enter setup. Rotate the control to make a selection, then press the control again to edit that selection. Additional levels of selection may be available using this same routine. Some edits will require a choice of 'OK' or 'CANCEL. Some selections are only informational, and cannot be edited. Select 'BACK' to return to a previous level, and select ' ' to advance. Primary selections are as follows: COBRANET PARAMTRS (CobraNet bundle, latency, & sample rate settings); PARAMTRS (various digital audio settings); WORD CLK OUTPUT (clock source); LOGIC PRESETS (store/recall logic input presets); PASSWORD PROTECT (prevent tampering); TITLE DISPLAY (create custom title); HARDWARE STATUS (display operational information); ABOUT (display serial# and version information). Menu information on page 4. 27V ~ 50/60 Hz BIAMP SYSTEMS Portland, Oregon logic inputs primary secondary green: link/act red: fault green: in use orange: conductor LEDs PUSH inputs PUSH inputs PUSH inputs PUSH 7-8 5-6 3-4 inputs 1-2 U.S. pat. no. 4,922,536 CobraNet TM connections only 12 watts class 2 wiring 1 2 3 4 5 6 7 8 -D word clock out TOSLINK TOSLINK SPDIF SPDIF Digital Inputs: The four female connectors provide a total of eight digital audio inputs in channel pairs (1-2, 3-4, 5-6, 7-8). inputs are transformer coupled and should be wired using 110 ohm shielded-pair digital audio cable, with pin 2 (+), pin 3 (-), & pin 1 (ground). Input pairs 1-2 & 3-4 may each be selected for SPDIF input, and input pairs 5-6 & 7-8 may each be selected for TOSLINK input (see Rotary Encoder above). SPDIF inputs are provided on RCA jacks and should be wired using 75 ohm coaxial cable, with Tip (+) and Sleeve (ground). TOSLINK inputs utilize optical digital audio patch cables. Word Clock Out: This BNC connector provides clock output from either CobraNet or a selected input source (see Rotary Encoder above). Logic Inputs: These eight Logic Inputs allow remote control of preset configurations. Preset configurations may be assigned to Logic Inputs 1~8 using the front panel Rotary Encoder (see above), and can then be selected via external contact-closures (wired from the corresponding logic inputs to ground). CobraNet: These two RJ45 connectors provide the CobraNet digital audio interface. CobraNet allows multiple AUDIA units to share digital audio (and DSP resources) on a system network. This also allows AUDIA units to be used with CobraNet compliant devices from other manufacturers. A 10/100Base-T Ethernet switch (not hub) is required when networking multiple units. The maximum distance between any unit and an Ethernet switch is 100 meters. Additional Ethernet switches, or even fiber-optics, can be used to further extend distances between units on a system network. The primary and secondary CobraNet ports are redundant. CobraNet supports 64 channels of digital audio (32-in & 32-out) over Fast Ethernet, using CAT-5 cable. CobraNet transmits (32) channels of digital audio on (4) 'bundles' of (8) channels each. The same is true for receiving digital audio over CobraNet. Bundle numbers are used to determine where digital audio is transmitted and received. Typically, 'unicast' bundle numbers (256~61,439) are used to exchange digital audio between two specific devices. With 'unicast' bundles, each CobraNet device can transmit to no more than (4) other devices within a network. With 'multicast' bundle numbers (1~255), digital audio can be exchanged with multiple devices. Due to network delay, CobraNet has a limitation of seven (7) 'hops' (one-way transmissions) within a network. In order to integrate AudiaEXPI-D into a AUDIA system, an EXPI-D (or CobraNet) input block must first be placed into the design layout. AUDIA units intended to receive digital audio from the AudiaEXPI-D must have their CobraNet jacks connected to the same network. Both the AudiaEXPI-D unit (hardware) and the EXPI-D input block (software) must be assigned ing bundle numbers, before digital audio can be successfully exchanged. AudiaEXPI-D bundle number assignment can be changed in real-time to allow routing of digital audio to different EXPI-D input blocks within the system. CobraNet Latency settings must be identical in all devices, system-wide. Also, unicast and multicast bundle numbers can be used to route digital audio to individual or multiple EXPI-D input blocks. Similar considerations may also apply when using AudiaEXPI-D with other CobraNet compliant systems or devices. AudiaEXPI-D and AudiaEXPO-D can exchange digital audio directly (outside of a system network) using either a simple 'cross-over' CAT5 cable or an Ethernet switch. 2
an affiliate of Rauland-Borg Corp. MADE IN U.S.A. AudiaEXPO-D - Front & Rear Panels -D BIAMP SYSTEMS Rotary Encoder & LCD Display: This control and display are used for initial setup of the AudiaEXPI unit. When power is first applied to the unit, the display will cycle through a product description, followed by a title screen. Press the control to enter setup. Rotate the control to make a selection, then press the control again to edit that selection. Additional levels of selection may be available using this same routine. Some edits will require a choice of 'OK' or 'CANCEL. Some selections are only informational, and cannot be edited. Select 'BACK' to return to a previous level, and select ' ' to advance. Primary selections are as follows: COBRANET PARAMTRS (CobraNet bundle, latency, & sample rate settings); PARAMTRS (various digital audio settings); LOGIC PRESETS (store/recall logic input presets); PASSWORD PROTECT (prevent tampering); TITLE DISPLAY (create custom title); HARDWARE STATUS (display operational information); ABOUT (display serial# and version information). Menu information on page 4. 27V ~ 50/60 Hz BIAMP SYSTEMS Portland, Oregon logic inputs primary secondary green: link/act red: fault green: in use orange: conductor LEDs outputs 7-8 outputs 5-6 outputs 3-4 outputs 1-2 12 watts class 2 wiring 1 2 3 4 5 6 7 8 U.S. pat. no. 4,922,536 CobraNet TM connections only -D word clock out TOSLINK TOSLINK SPDIF SPDIF Digital Outputs: The four male connectors provide a total of eight digital audio outputs in channel pairs (1-2, 3-4, 5-6, 7-8). outputs are transformer coupled and should be wired using 110 ohm shielded-pair digital audio cable, with pin 2 (+), pin 3 (-), & pin 1 (ground). Output pairs 1-2 & 3-4 are also available as SPDIF outputs, and output pairs 5-6 & 7-8 are also available as TOSLINK outputs. SPDIF outputs are provided on RCA jacks and should be wired using 75 ohm coaxial cable, with Tip (+) and Sleeve (ground). TOSLINK outputs utilize optical digital audio patch cables. Word Clock Out: This BNC connector provides clock output from CobraNet. Logic Inputs: These eight Logic Inputs allow remote control of preset configurations. Preset configurations may be assigned to Logic Inputs 1~8 using the front panel Rotary Encoder (see above), and can then be selected via external contact-closures (wired from the corresponding logic inputs to ground). CobraNet: These two RJ45 connectors provide the CobraNet digital audio interface. CobraNet allows multiple AUDIA units to share digital audio (and DSP resources) on a system network. This also allows AUDIA units to be used with CobraNet compliant devices from other manufacturers. A 10/100Base-T Ethernet switch (not hub) is required when networking multiple units. The maximum distance between any unit and an Ethernet switch is 100 meters. Additional Ethernet switches, or even fiber-optics, can be used to further extend distances between units on a system network. The primary and secondary CobraNet ports are redundant. CobraNet supports 64 channels of digital audio (32-in & 32-out) over Fast Ethernet, using CAT-5 cable. CobraNet transmits (32) channels of digital audio on (4) 'bundles' of (8) channels each. The same is true for receiving digital audio over CobraNet. Bundle numbers are used to determine where digital audio is transmitted and received. Typically, 'unicast' bundle numbers (256~61,439) are used to exchange digital audio between two specific devices. With 'unicast' bundles, each CobraNet device can transmit to no more than (4) other devices within a network. With 'multicast' bundle numbers (1~255), digital audio can be exchanged with multiple devices. Due to network delay, CobraNet has a limitation of seven (7) 'hops' (one-way transmissions) within a network. In order to integrate AudiaEXPO-D into a AUDIA system, an EXPO-D (or CobraNet) output block must first be placed into the design layout. AUDIA units intended to transmit digital audio to the AudiaEXPO-D must have their CobraNet jacks connected to the same network. Both the AudiaEXPO-D unit (hardware) and the EXPO-D output block (software) must be assigned ing bundle numbers, before digital audio can be successfully exchanged. AudiaEXPO-D bundle number assignment can be changed in real-time to allow access to digital audio from different EXPO-D output blocks within the system. CobraNet Latency settings must be identical in all devices, system-wide. Also, unicast and multicast bundle numbers can be used to access digital audio from individual or multiple EXPO-D output blocks. Similar considerations may apply when using AudiaEXPO-D with other CobraNet compliant systems or devices. AudiaEXPI-D and AudiaEXPO-D can exchange digital audio directly (outside of a system network) using either a simple 'cross-over' CAT5 cable or an Ethernet switch. 3
ENCODER/DISPLAY MENUS At power-up, the display will flash three product ID screens, ending on a customizable Title screen. Pressing the encoder while on the Title screen will reveal the Main Menu. Rotate encoder to cycle through available selections. Press encoder to make selections or enter data. MAIN MENU: COBRANET PARAMTRS - PARAMTRS - WORD CLK OUTPUT (EXPI-D only) - LOGIC PRESETS - PASSWORD PROTECT - TITLE DISPLAY - HARDWARE STATUS - ABOUT COBRANET PARAMTRS: Establishes CobraNet parameters for CURRENT operation and for LOGIC 1~8 (presets). BUNDLE NUMBER - COBRANET LATENCY - COBRANET SAMPL RT BUNDLE NUMBER: Assigns CobraNet bundle number for current operation or selected logic preset. Bundle numbers must those of the corresponding blocks within the AUDIA system design (or other CobraNet devices being used). ('unicast' bundle numbers = 256 ~ 61,439; 'multicast' bundle numbers = 1 ~ 255) COBRANET LATENCY: Selects appropriate CobraNet latency for current operation or selected logic preset. CobraNet latency must that of the corresponding AUDIA system (or other CobraNet devices being used). (5.33mS default; 1.33mS; 2.66mS) COBRANET SAMPL RT: Selects desired CobraNet sample rate for current operation or selected logic preset. CobraNet sample rate must that of the corresponding AUDIA system (or other CobraNet devices being used). (48kHz default; 96kHz) PARAMTRS: Establishes digital audio parameters for CURRENT operation and for LOGIC 1~8 (presets). MUTE - SOURCE - FORMAT - EMPHASIS - SAMPLE RT - SIGNAL - COPYGRD MUTE: Assigns muting of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset. ('N' = un-muted default; 'Y' = muted) SOURCE: Selects source of digital audio input pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset. ('A' = default; 'S' = SPDIF; 'T' = TOSLINK) (EXPI-D only) FORMAT: Selects / displays format of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset. EXPI- D detects format of the digital audio input sources. EXPO-D settings must be compatible with receiving devices. ('P' = Professional default; 'C' = Consumer) (EXPO-D selection; EXPI-D display only) EMPHASIS: Selects / displays emphasis of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset. EXPI-D detects emphasis of the digital audio input sources. EXPO-D settings must be compatible with source signals. ('N' = Off default; 'Y' = On; '?' = EXPI-D input source emphasis unknown) (EXPO-D selection; EXPI-D display only) SAMPLE RT: Displays sample rate of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation. EXPI-D detects sample rate of the digital audio input sources. EXPO-D simply displays the selected CobraNet sample rate. (32kHz; 44kHz; 48kHz; 82kHz; 96kHz; '?' = EXPI-D input source sample rate unknown) (display only) SIGNAL: Displays presence of carrier signal at digital audio input pairs (1-2; 3-4; 5-6; 7-8) for current operation. ('Y' = carrier present; 'N' = carrier not detected) (EXPI-D display only) COPYGRD: Selects / displays copy guard of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset. EXPI-D detects copy guard of the digital audio input sources. EXPO-D settings must be compatible with source signals. NOTE: It is illegal to make unauthorized copies of copy guarded material. ('N' = Off default; 'Y' = On; '?' = EXPI-D input source copy guard unknown; 'x' = not available for Professional format) 4
ENCODER/DISPLAY MENUS WORD CLK OUTPUT (EXPI-D only): Selects word clock source for CURRENT operation and for LOGIC 1~8 (presets). ('CBRNET' default; 'INP 12'; 'INP 34'; 'INP 56'; 'INP 78') LOGIC PRESETS: Recalls LOGIC 1~8 presets into current settings or saves current settings into LOGIC 1~8 presets. RECALL - SAVE TO PASSWORD PROTECT: Sets and clears password protection. Locks and un-locks access to settings via established password. LOCK (SET PWRD) - UNLOCK (ENT PWRD) - CLEAR TITLE DISPLAY: Establishes a customized Title screen to be displayed at power-up and after exiting setup menus. ('TITLE 1' = top line / 8 characters; 'TITLE 2' = bottom line / 8 characters) HARDWARE STATUS: Displays operational status of various hardware parameters. 3.3V PWR - COBRANET - TEMPRATR - FAN - CLK OUTP - AUDIO 12 - AUDIO 34 - AUDIO 56 - AUDIO 78 ABOUT: Displays serial number and various version related information. SERIAL # - FWARE V. - BOOT V. - CM1 V. (CobraNet) - MAC (CobraNet module ethernet address) 5
APPLICATION This application demonstrates the use of AUDIA in a house of worship. This is a networked system using one AudiaFLEX 8-Output CM unit, an AudiaEXPI-D 8-Input Digital Expander unit, and an AudiaEXPO-D 8-Output Digital Expander unit (eight digital inputs, eight digital outputs, eight analog outputs, CobraNet). An example system diagram is shown on the opposite page, and a representative design layout is shown at the bottom of this page. Multiple microphones, for speech and music performance, are connected to inputs of a digital mixing console located at the Front-of-House mixing position. The console provides multiple mixes, including effects, which are appropriate for as many as eight different outputs: Main Speakers (HF & LF), Balcony Speakers, Under-Balcony Speakers, Stage Monitors (1 & 2), Recording, and Hearing Assistance. Eight digital audio feeds, from mixing console outputs and other 'playback' devices, are connected to inputs of the AudiaEXPI-D unit, which is located near the mixing console. These signals are then sent via CobraNet to the AudiaFLEX unit, which is located backstage. The AudiaFLEX unit provides all necessary signal processing for each of the system outputs, before feeding an MCA8150 power amplifier located in the same equipment rack. The MCA8150 amplifier uses four channels bridged in pairs, creating two outputs of 300 watts each. These outputs are driving the Main speaker systems (HF & LF). The MCA8150 amplifier also uses four individual channels, of 150 watts each, to drive the Balcony, Under- Balcony, Monitor 1, & Monitor 2 speaker systems. TDT150 transformers are installed internally for the outputs driving the Balcony and Under-Balcony systems, which are utilizing 70V distributed speakers. The AudiaFLEX unit also provides eight channels of digital audio, via CobraNet, to the AudiaEXPO-D. The AudiaEXPO-D then provides digital audio outputs at a broadcast/media feed panel. CobraNet from the three AUDIA units is tied together through an Ethernet switch. This allows sharing of digital audio signals on a network. The maximum distance between any AUDIA unit and an Ethernet switch is 300 feet. Therefore, this system can span up to 600 feet between the backstage and mixing locations. Additional Ethernet switches, or even fiber-optics, can be used to further extend distances between units on the network. An added benefit to CobraNet is that it affords the necessary isolation to help avoid ground loops between active components in different locations. CobraNet also saves on the labor and expense of wiring, by transmitting eight channels of digital audio over a single CAT5 cable. Of course, all live mixing is done at the console. The AUDIA network provides transportation, routing, and processing of the signals. AudiaEXPI-D and AudiaEXPO-D units act as a 'digital snake', transmitting digital audio between the backstage, mixing, and broadcast/media feed locations. The AudiaFLEX unit provides routing and signal processing for the various outputs. In the example design, parametric EQ and comp/limiting are employed at all speaker outputs. Main outputs include a 2-Way Crossover (separate highfrequency & low-frequency drivers). Balcony and Under-Balcony outputs include Delay compensation. Recording, Hearing Assistance, and Broadcast/Media outputs are processed simply with Levelers (for automatic control of recording/broadcast signal levels). Various remote control options are available. Volume 8, Select 8, and Volume/Select 8 rotary encoder panels may be used to provide volume adjustments and preset selections. A Logic Box allows system control via external switches, or control of external equipment from the system itself. 6
27V 50/60 Hz 12 watts class 2 wiring BIAMP SYSTEMS Portland, Oregon an affiliate of Rauland-Borg Corp. MADE IN U.S.A. primary secondary LEDs green: link/act red: fault green: in use orange: conductor U.S. pat. no. 4,922,536 52SJ primary secondary PUSH PUSH PUSH PUSH 24VDC 1.5A LEDs green: link/act red: fault green: in use orange: conductor U.S. pat. no. 4,922,536 CAUTION RISK OF ELECTRICAL SHOCK. DO NOT OPEN. In 23 Out 1 In 24 Out 2 In 21 Out 3 In 22 Out 4 In 19 Out 5 In 20 Out 6 27V 50/60 Hz 12 watts class 2 wiring In 17 Out 7 In 18 Out 8 BIAMP SYSTEMS Portland, Oregon an affiliate of Rauland-Borg Corp. In 15 Out 9 In 16 Out 10 52SJ MADE IN U.S.A. In 13 Out 11 In 14 Out 12 In 11 Out 13 In 12 Out 14 primary In 9 Out 15 In 10 Out 16 secondary LEDs green: link/act red: fault green: in use orange: conductor U.S. pat. no. 4,922,536 In 7 Out 17 In 8 Out 18 In 5 Out 19 In 6 Out 20 RISK OF ELECTRICAL SHOCK. DO NOT OPEN. Portland, Oregon an affiliate of Rauland-Borg Corp. In 3 Out 21 In 4 Out 22 MADE IN U.S.A. In 1 Out 23 In 2 Out 24 APPLICATION AudiaEXPI-D ~ logic inputs inputs 7-8 inputs 5-6 inputs 3-4 inputs 1-2 CobraNet TM connections only 1 2 3 4 5 6 7 8 -D word clock out TOSLINK TOSLINK SPDIF SPDIF digital audio from mixing console & playback devices AudiaEXPO-D ~ logic inputs outputs 7-8 outputs 5-6 outputs 3-4 outputs 1-2 TM CobraNet connections only 1 2 3 4 5 6 7 8 -D word clock out TOSLINK TOSLINK SPDIF SPDIF CobraNet digital audio to broadcast & media feeds EtherNet Switch AudiaFLEX 8-out CM 100-240V~ 50/60Hz Serial Control Port BIAMP SYSTEMS 110 Watts CobraNet TM connections only C UR L US remote control options: Volume 8, Select 8, Volume/Select 8, Logic Box (volumes, presets, muting, scenes, routing, etc.) LISTED link Ethernet term hi lo Remote Control Bus BLACK connectors = OUTPUTS ORANGE connectors = AEC INPUTS GREEN connectors = INPUTS remote control CAUTION MCA 8150 BIAMP SYSTEMS an affiliate of Rauland Borg Corp. MADE IN U.S.A. recording feed hearing assistance FUSE FUSE CAUTION: Risk of fire - replace fuse only with same type F 15 A H 250 V O C UR L LISTED US 115V~ 50/60Hz 1800 Watts signal / peak 8 7 input level HPF BRIDGE HPF 8 outputs level 7 input signal / peak signal / peak 6 5 4 3 input signal / peak level level level level HPF BRIDGE HPF 6 outputs signal / peak input input 5 Class 2 Wiring HPF BRIDGE HPF 4 outputs input 3 signal / peak signal / peak 2 1 input level level HPF BRIDGE HPF 2 outputs input 1 signal / peak Balcony speakers Monitor 1 speakers Main LF speakers Main HF speakers Under-Balcony speakers Monitor 2 speakers 7
SPECIFICATIONS AudiaEXPI-D SPECIFICATIONS Sample Rate: network network 16kHz~96kHz 32kHz~96kHz Logic Input Characteristics: CobraNet I/O: TTL or contact-closure 100Mb ethernet Bit Resolution (determined by input source or CobraNet): up to 24 bits Power Consumption (115/230VAC 50/60Hz): < 12 watts Audio Input Signal Characteristics / Connectors: compliant, transformer coupled SPDIF compliant TOSLINK compliant Clock Output Signal Characteristics / Connector: single ended, TTL compatible RCA Optical BNC Dimensions: Weight: height width depth 1.75 inches (44.5mm) 19 inches (483mm) 5.75 inches (146mm) 4.3 lbs. (2kg) AudiaEXPO-D SPECIFICATIONS Sample Rate (determined by CobraNet ): 48/96kHz CobraNet I/O: 100Mb ethernet Bit Resolution ): up to 24 bits Power Consumption (115/230VAC 50/60Hz): < 12 watts Audio Output Signal Characteristics / Connectors: compliant, transformer coupled SPDIF compliant, single ended, AC coupled TOSLINK compliant Clock Output Signal Characteristics / Connector: single ended, TTL compatible RCA Optical BNC Dimensions: height width depth 1.75 inches (44.5mm) 19 inches (483mm) 5.75 inches (146mm) Logic Input Signal Characteristics: TTL or contact-closure Weight: 4.3 lbs. (2kg) 8
BLOCK DIAGRAMS EXPI-D Functional Block Diagram Cobranet Out Logic In Rotary Encoder LCD Cobranet Module Barrier Strip up display info audio Cobranet clock (48 / 96 khz) Sample Rate Converter Sample Rate Converter Sample Rate Converter Sample Rate Converter clock source control Decoder Decoder Cobranet / Input word clocks Decoder Decoder clock source select input source control Rcvr Rcvr Rcvr Rcvr Driver TOSLINK TOSLINK RCA RCA BNC digital audio in word clk out EXPO-D Functional Block Diagram Cobranet In Logic In Rotary Encoder LCD Barrier Strip Cobranet Module control up audio Cobranet clock (48 / 96 khz) Encoder Encoder Encoder Encoder Driver Driver Driver Driver Driver BNC TOSLINK TOSLINK RCA RCA word clk out digital audio out 9
WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems dealer, subject to the terms and conditions set forth below. 2. If you notify BIAMP during the warranty period that a BIAMP Systems product fails to comply with the warranty, BIAMP Systems will repair or replace, at BIAMP Systems' option, the nonconforming product. As a condition to receiving the benefits of this warranty, you must provide BIAMP Systems with documentation that establishes that you were the original purchaser of the products. Such evidence may consist of your sales receipt from an authorized BIAMP Systems dealer. Transportation and insurance charges to and from the BIAMP Systems factory for warranty service shall be your responsibility. 3. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered, subjected to damage, abuse or rental usage, repaired by any person not authorized by BIAMP Systems to make repairs; or installed in any manner that does not comply with BIAMP Systems' recommendations. 4. Electro-mechanical fans, electrolytic capacitors, and normal wear and tear of items such as paint, knobs, handles, and covers are not covered under this warranty. 5. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. BIAMP SYSTEMS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 6. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. 7. No agent, employee, distributor or dealer of Biamp Systems is authorized to modify this warranty or to make additional warranties on behalf of Biamp Systems. statements, representations or warranties made by any dealer do not constitute warranties by Biamp Systems. Biamp Systems shall not be responsible or liable for any statement, representation or warranty made by any dealer or other person. 8. No action for breach of this warranty may be commenced more than one year after the expiration of this warranty. 9. BIAMP SYSTEMS SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS OR LOSS OF USE ARISING OUT OF THE PURCHASE, SALE, OR USE OF THE PRODUCTS, EVEN IF BIAMP SYSTEMS WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Biamp Systems 10074 S.W. Arctic Drive Beaverton, Oregon 97005 (503) 641-7287 585.0197.00 10
Declaration of Conformity Biamp Systems, Inc., as the manufacturer, hereby declares that the following described product, in our delivered version, complies with the provisions of the DIRECTIVES except as noted herein. In case of alteration of the product, not agreed upon or directed by us, this declaration is no longer valid. Product Model: AudiaEXPI D and AudiaEXPO-D Product Description: Input Expander - Output Expander Applicable EC Directives: EMC Directive (89/336/EEC), LVD Directive (73/23/EEC) Applicable Harmonized Standards: EN55103-1 emissions EN55103-2 immunity EN60065 safety Special Considerations for Product Environment or Compliance: Shielded cabling must be used for system connections. The apparatus is deemed incapable of producing harmonic emissions or flicker levels sufficient enough to interfere with other apparatus as noted in EN61000-3-2 and EN61000-3-3. This apparatus operates from a removeable external power source at voltages below the levels encompassed by the LVD. The external power source complies with the applicable requirements of EN60065. The apparatus itself is outside of the scope of the LVD and presents no hazardous voltages, as defined in the LVD. For compliance, the apparatus shall be powered only from the separate CE marked Biamp Systems power source. RF interference conducted through interconnect cabling may cause varying degrees of random signal degradation. The effect of increased noise or distortion due to this interference is typically masked by the desired signal. In no instance is operation inhibited. The Technical Report/File is maintained at: Biamp Systems, Inc. 10074 S.W. Arctic Drive Beaverton, OR USA 97005 phone: (503) 641-7287 fax: (503) 626-0281 e-mail: biamp@biamp.com Authorized Representative: Glenn Westerfield Authorized Representative Signature: Issued: June, 2004 11
12
13
14