TravelSmith Standard Knits Test Package (Required for all items)

Similar documents
TravelSmith Standard Knits Test Package (Required for all items)

VENDOR MANUAL VERSION 2.0. SECTION 7 Testing, Labeling & Product Compliance

About. filzfelt.com 1

Proposed Changes to Asian Graphic Paper Assessments

Technical Data Sheet. Scotchlite Reflective Material Series 6100 High Gloss Trim Series 6200 High Gloss Film. Retroreflective Performance.

Sumitomo Cable Specification SE-*RU. OFNP Rated Central Tube Cable with Optical Fibers. Issued: December 2014

3M Envision Flexible Substrate

Sumitomo Cable Specification SE-*DB. 100% Dry - Armored Central Tube Ribbon Cable with Fibers. Issued: January 2014

3. Fibre Gripper - Includes a simple adaptor to fit 70mm glass slides to the OFDA 4000 for measuring fibre snippets (not shown)

Mining and Petrochemical Fiber Optic Cables

About. filzfelt.com 1

PORON Microcellular Polyurethanes - Product Availability

Introduction. Part 1. Evaluating Color. Color Communication/Terms. Colorist Qualifications. Color Equipment/Instruments. Specifications/Settings

Panagraphics III. Wide Width Flexible Substrate. Product Bulletin Panagraphics III Release B-EU, Effective June Product Description

OPTICAL FIBER CABLE, ALL DIELECTRIC SELF SUPPORTING CABLE

Product Classification. Dimensions. Environmental Specifications. General Specifications. Material Specifications. Mechanical Specifications

VENDOR MANUAL VERSION 2.0. SECTION 6 Technical Design Sample & Fit Requirements

Model ED 400 Drying and heating chambers Classic.Line with natural convection

About. filzfelt.com 1

Chapter 7 Production Sample Process (Apparel)

Kimball - Finer Points Plus Coordinates FINER POINTS PLUSCOORDINATES

Sumitomo Cable Specification SE-*RD. All-Dielectric Ribbon Cable with Fibers. Issued: April 2014

KOHL S TEST PROTOCOL Approved: June 27, 2018

ENGINEERING COMMITTEE Interface Practices Subcommittee. ANSI/SCTE (Formerly IPS SP 001)

PORON Microcellular Urethanes Product Availability

TEST REPORT. NO.: A002T R02 Date: Dec. 19, 2014 Page 1 of 5

PORON Microcellular Urethanes

PORON Microcellular Urethanes

Jumpers & Pigtails. Fiber Type OM1, OM3, OM4, 0S1/OS2. Polarity Correction SC and LC duplex clip allows for polarity correction

Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE

Intelligent Pendulum Hardness Tester BEVS 1306 User Manual

Support Opportunities May 9-12, 2014

RALLY SIGNS HAND HELD DOUBLE-SIDED SIGNS

Hot strip mill product dimensions Hot rolled Steel Strip

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

Flexible Cord. Inside this section

Mar11 Rev E

REMIX REMASTERED Backbeat / Freestyle Mix Tape / Bass Line

DOME OPTIC SPLICE CLOSURE

Preserving Our History: Principles of Archival Conservation

Spec No.: ZTT Revision: 2 Date: Oct 3, Designer. Senior Technical Manager. Approver. Chief Technical Engineer

Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore

Agilent 86120B, 86120C, 86122B Multi-Wavelength Meters. Data Sheet

Symbol Parameter Value Unit V CES Collector-Emitter Voltage (V BE = 0) 700 V V CEO Collector-Emitter Voltage (I B = 0) 400 V Emitter-Base Voltage

Modular operating rooms Sundsvall Regional Hospital

RATE CARD & MEDIA KIT 2013

MAP110 AC-DC Series Data Sheet

Frequency ASRL(db) Attenuation Max. NEXT Power Sum (MHz) Minimum db/100m db/1000ft Minimum db/100m Minimum db/100m

CC-Link IE Controller Network Compatible. CC-Link IE Controller Network Recommended Network Wiring Parts Test Specifications

For Cut Film Decoration and Piezo Inkjet Direct Printing

Sima XL-72 Theater Inflatable Indoor/Outdoor Projection Screen

SINGLE MODE OPTICAL FIBER CABLE SPECIFICATION (ARSS)

Specification for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D)

HD DESIGNS HOLIDAY : Tabletop Dinnerware CLASS #735, 790, 791, 792 Christmas FOR POSITION ONLY. 25mm FM-SATIN-CARE-HARD

DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2

ADDENDUM #3. SPECIAL NOTE: Addendum #3 information shall supersede the information contained in the Contract Documents

FREEDM Loose Tube Interlocking Armored Cables

VENDOR MANUAL VERSION 2.0 SECTION 3 - COLOR SYSTEM

About Nexans 3. About Berk-Tek 4. Hyper Plus 5e Cat 5e UTP 5. HyperPlus 5e Plenum 6. Hyper Plus 5e Riser 10. HyperPlus 5e Patch 14

NEPTUNE PROJECTION SCREEN PRO-LINE MANUAL SCREEN NEPTUNE PRO-LINE MNAUAL SCREEN SPRING ROLL LOCKING SYSTEM DEFINITE ASPECT UNIQUE APPEARANCE DURABLE

Sinergies in Electrowinning and Electrorefining

CARLITE grain orien TEd ELECTRICAL STEELS

Agilent 86120B, 86120C, 86122A Multi-Wavelength Meters Technical Specifications

Timing Modules. Connect Frequency Control Timing Modules

Single output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.

INDUSTRY SOLUTIONS: MINING

Scotchal Translucent Graphic Film Series 2630

SOLO ADSS Short-Span Cables, Fibers

ProJet MJP 5600 Composite multi-material 3D printer

America s leading. sign manufacturer CHURCH SCHOOL MUNICIPAL. WHOLESALE SIGN MANUFACTURING

Flygt Submersible Motor Cables

W-Series. Switch. Fully sealed and submersible IP68 protection including below the panel Tri-seal design Connector with twin locking tabs

Technical. Data Sheet. 3M Scotchlite Reflective Material 8725 / 8725 LL Silver Transfer Film. May Product Information. 2.

CNT FIELD EMISSION CATHODE CATALOG. XinRay Systems Inc. April 2014

ADVANCED CABLE TIES, INC.

DEGALAN Coating Resins SALES RANGE

PRODUCT FAMILY DATASHEET MINNIE

INDUSTRY OVERVIEW. Global Demand for Paper and Paperboard: Million tonnes. Others Latin America Rest of Asia. China Eastern Europe Japan

avenue Submit Forms CONTENTS I. Statement of Purpose Explanation of Effective Color Evaluation Color Standards Lab Dip Process

Scotch Heavy Duty Vinyl Electrical Tape 22

Dimensions. Electrical Specifications. Environmental Specifications. General Specifications. Mechanical Specifications.

Request for Proposals Fiber Optic Network Backbone Upgrades

Bimetal Temperature Switch

1 1/2 13.5, 625 JCASS)

MCX - 75 Ohm Connectors

Defining Visual Technology! Bringing Visual Clarity to every Display

Hong Kong and Guangdong Guideline for place booking and booking amendment

BML-M0 _-I -A _-... User's Guide

BUL1203EFP HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR

Cie L*55 a* b* Keeping Color in Fashion. Solutions for textile color consistency

ENGINEERING COMMITTEE

Unlimited Saver [2] Primary Line $20.00 Voice Mail Saver Pack [2,3] Primary Line $20.00 Voice Mail 3.95

ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors

Making products more reliable

3M Super 23 Electrical Tape

For Cut Film Decoration and Inkjet Direct Printing

High efficiency pumps with LCD display electronically controlled HEP Optimo L series, H2 product group

VENDOR MANUAL VERSION 2.0. SECTION 8 Quality Assurance Requirements

We give 5* YEARS FULL WARRANTY on our boards and provide 24H/7 Customer Support

Tender Report for Supply and installation of LAN in *Biomedical Imaging and Bioinformatics Lab*

Transcription:

TravelSmith Standard Knits Test Package (Required for all items) Fiber Content (qualitative) (Note 3) Fabric Garment Fabric/Garment * AATCC 20 As claimed Yes No Darkest color Fabric Weight (g/m 2 )/weight per doz. (sweaters) ASTM D3776 ±5.0% of claimed Yes No Darkest color Colorfastness to Crocking (dry/wet) AATCC 8 Dry: 4.0, Wet: 3.0 Yes No All colors AATCC 61 (laundering) Color Change: 4.0; self-staining: 4.5 Colorfastness to Care No Yes All colors AATCC 132 (dry cleaning) Multifiber Staining: 3.0 Dimensional Stability to Care Appearance After Care AATCC 135/150 (laundering) AATCC 135/150 (laundering) ±5.0% No Yes Frayed Edges: Open Seams: Skewness: Torque: 5.0% max Shading: 4.0 Embroidery/Embellishment Appearance: Smoothness Appearance: 3.5 Appearance of Seams: SS-4 Appearance of Creases: 4.0 No Yes All colors (sweaters) Darkest color (all other knits) All colors (sweaters) Darkest color (all other knits) Pilling Resistance (knits only) ASTM D3512 3.5 @ 30 minutes Yes No Darkest color Pilling Resistance (sweaters) ASTM D3512 3.5 @ 30 minutes Yes No Darkest color Seam Stretchability AATCC TS-015 6 lbs. or 35% elongation No Yes Darkest color Comments The price shall include Fiber content test of ONE fiber: for additional charges--see below- Care Label Verification must be verified with submitted care instructions. Full Package Price - ASIA PACIFIC Package Price (Additional Colorway: Other Knits) - ASIA PACIFIC Package Price (Additional Colorway: Sweater) - ASIA PACIFIC Full Package Price - US Package Price (Additional Colorway: Other Knits) - US Package Price (Additional Colorway: Sweater) - US Full Package Price - INDIA Package Price (Additional Colorway: Other Knits) - INDIA Package Price (Additional Colorway: Sweater) - INDIA 62 56 84 12 (Note 7) N/A 70 33 N/A 84 263 181 276 124 N/A 124 181 N/A 181 58 65 102 31 N/A 31 31 N/A 31

Additional Required Tests (when applicable--at additional cost) Fiber Content (quantitative) AATCC 20A For specialty fibers or blends (angora, alpaca, cashmere, wool, mohair, etc.) ±0.0% (Cashmere) ±3.0% (all others) Fabric Garment Yes No Darkest Color Special Price US Asia Pacific INDIA Additional charge over 1 fiber cost included in package '- 2 common fiber blend: US 45 - Microscopic Analysis: US $355 - Chemical Method per fiber: USD 9 - Microscopic Method: 1st fiber: USD35 Each additional fiber: USD20 14 Flammability (if not exempt) 16 CFR 1610 Class 1 only Yes No Darkest Color 70 28 22 Colorfastness to Chlorine Bleach AATCC TS-001 Color Change: 4.0 Yes No All colors 17 7 9 Colorfastness to Non-Chlorine Bleach AATCC TS-001 Color Change: 4.0 Yes No All colors 17 8 9 Stretch & Recovery: if elastomeric yarns ASTM D 2594 see below*** Yes No Darkest Color 82 20 51 Wicking (if claimed) AATCC 197 or UL TP-118 6" (min) at 30 minutes Yes No Darkest Color 37 17 22 Lead in Surface Coating 16 CFR 1303 </= 90 ppm UV Protection Test AATCC 183 Good 15-24 Very Good 25-39 Excellent 40+, 50+ 18 No Yes All applicable items 75 87.75 87 26 ***Stretch and recovery requirements: Spandex content >/= to 10% (60 seconds): recovery requirement = 85% growth requirement = 5% Spandex content < 10% (1 hour): recovery requirement = 70% growth requirement = 7% NOTE: If garment testing is requested and the vendor did not supply a fabric test report number, then a combination of fabric and garment testing must be conducted. Cost of new Fabric/Garment package is a combination of garment testing plus additional fabric tests. is not to be duplicated.

TravelSmith Standard Wovens Test Package (Required for all items) Fiber Content (qualitative) (Note 3) Fabric Garment Fabric/Garment * AATCC 20 As claimed Yes No Darkest color Fabric Weight (g/m 2 ) ASTM D3776 ±5.0% of claimed Yes No Darkest color Colorfastness to Crocking (dry/wet) AATCC 8 Dry: 4.0 Wet: 3.0 Dry: 3.0 (dark denims) Wet: 2.0 (dark denims) AATCC 61 (laundering) Color Change: 4.0 Colorfastness to Care Self-Staining: 4.5; multifiber: No Yes All colors AATCC 132 (dry cleaning) 3.0 Dimensional Stability to Care AATCC 135/150 (laundering) ±3.0% No Yes garment Darkest color Comments The price shall include Fiber content test of ONE fiber: for additional charges--see below- Appearance After Care AATCC 135/150 (laundering) Frayed Edges: Open Seams: Skewness: Torque: 5.0% max Shading: 4.0 Appearance: Smoothness App.: 3.5 Smoothness Seams: SS-4 App. Creases: 4.0 No Yes garment Darkest color (all other wovens) Pilling Resistance ASTM D3514 3.5 at 300 cycles Yes No Darkest color Seam Strength / Seam Slippage ASTM D1683 All garments: <2.0 oz/sq yd: 10 lbf ; 2.0-4.0 oz/sq yd: 15 lbf.; 4.0-6.0 oz/sq yd: 20 lbf; No Yes Darkest Color >6.0 oz sq yd: 25 lbf. Care Label Verification must be verified with submitted care instructions. Full Package Price - ASIA PACIFIC 95 76 104 Package Price (Additional Color) - ASIA PACIFIC 12 (Note 7) N/A N/A Full Package Price - US 267 213 361 Package Price (Additional Colorway: Other Wovens) - US 66 N/A 66 Full Package Price - INDIA 57 65 101 Package Price (Additional Color) - INDIA 12 N/A 12 Additional Required Tests (when applicable) Fabric Garment Special Price US Asia Pacific INDIA

Fiber Content (quantitative) AATCC 20A ±3.0% (specialty fibers) Yes No Darkest color Additional charge over 1 fiber cost included in package '- 2 common fiber blend: US 45 - Chemical Method per fiber: USD 9 - Microscopic Method: 1st fiber: USD35 Each additional fiber: UD20 Flammability (if not exempt) 16 CFR 1610 Class 1 Yes No Darkest Color 70 28 22 Colorfastness to Chlorine Bleach AATCC TS-001 Color Change: 4.0 No Yes All colors 17 7 9 Colorfastness to Non-Chlorine Bleach AATCC TS-001 Color Change: 4.0 No Yes All colors 17 8 9 Lead in Surface Coating 16 CFR 1303 </= 90 ppm No Yes All applicable items 75 18 26 Stretch & Recovery: if elastomeric yarns ASTM D 3107 see below*** Yes No Darkest color 82 20 51 Differential shrinkage of shell and lining of lined garments AATCC 150 shall not hang below shell level N/C N/C N/C Conduct the following tests only if a claim is present: Water Repellency AATCC 22 orig: ISO 90; after 3 washes: 70 No Yes All colors 41 11 20 Water Resistance AATCC 35 1 g penetration max. Yes No All colors 53 37 20 14 Water Resistance - Hydrostatic Head AATCC 127 Highest MM can test 7500 MM No Yes Darkest color **Wrinkle Resistance/DP ratings rate at 5 cycle intervals--use 25 cycles as end-point AATCC 143 grade 3.5 No Yes Darkest color 87.75 HK - $16.40 China - $13.00 56 10 upon request Wrinkle Recovery AATCC 128 grade 4.0 Yes No Darkest color 58 15 44 Wicking AATCC 197 or UL TP-118 6" (min) at 30 minutes Yes No Darkest color 37 17 22 **Stain/Soil Release (orig/after 5 & 20 cycles AATCC 130 **Oil Repellency AATCC 118 grade 5 original; after 5 washes: 4 min; after 20 washes: 3 min. Yes No All colors grade 6 original; after 5 washes: 5 min; after 20 washes: 4 min. Yes No All colors 50 18 48 53 13 42 Good 15-24 Very Good 25-39 Excellent 40+, 50+ UV Protection Test AATCC 183 **PRICE IS GIVEN FOR ORIGINAL ONLY PRICE UPON REQUEST FOR ADDITIONAL INTERVALS 87.75 87 ***Stretch and recovery requirements: Spandex content >/= to 10% (30 seconds): recovery requirement = 85% growth requirement = 5% Spandex content < 10% (30 minutes): recovery requirement = 70% growth requirement = 7% NOTE: If garment testing is requested and the vendor did not supply a fabric test report number, then a combination of fabric and garment testing must be conducted. Cost of new Fabric/Garment package is a combination of garment testing plus additional fabric tests. is not to be duplicated.

TravelSmith Standard Leather & Suede Test Package (Required for all items) Fabric Garment Colorfastness to Crocking (dry/wet) Colorfastness to Care Dimensional Stability to Care ASTM D5053 Professional Leather Cleaning Professional Leather Cleaning Dry: 3.0 Wet: 2.0 Color Change: 4.0 Multifiber Staining: 4.5 ±3.0% Yes Yes Darkest color Appearance After Care Professional Leather Cleaning Frayed Edges: Open Seams: Skewness: Torque: 5.0% max Shading: 4.0 Embroidery/Embellishment Appearance: Smoothness Appearance: 3.5 Appearance of Seams: SS-4 Appearance of Creases: 4.0L Lining can not exceed length of shell No Yes Darkest color Full Package Price - ASIA PACIFIC Package Price (Additional Colorway) - ASIA PACIFIC Full Package Price - US Package Price (Additional Colorway) - US Full Package Price - INDIA 77 80 67 N/A 107 124 103 75 not possible not possible Package Price (Additional Color) - INDIA not possible not possible Additional Required Tests (when applicable) Garment Special Price Fabric US Asia Pacific India Flammability 16 CFR 1610 Class 1 only Yes No Darkest Color 70 28 22

Notes : 1. The prices applicable to UL- Asia Pacific (Hong Kong, China (Shanghai & Shenzhen), India & US office. 2. The prices include the testing charge of ONE washing condition only (either washing or drycleaning) with reference to the provided care instruction. If both washing conditions are required, the drycleaning condition will be charged as a separate cost. 3. 4. 5. The package price shall include Fiber content test of ONE fiber by chemical method. Additional charge is required for additional fiber or when microscopic method is needed. The prices include ONE testing analysis per test item, additional charge is required if extra analysis is needed. Samples Required: Need to send 3 samples for full testing, or 2 samples plus 1/2 yard of fabric. For complicated / patched styles we need 4 samples total. The prices quoted are based on regular service only. Rush Services are available with surcharge. UL-Asia Pacific Regular Service Express Service Shuttle Service Immediate Service 5 working days 3 working days 2 working days 24 hours No surcharge 40% surcharge 70% surcharge 100% surcharge 5 working days 3 working days 2 working days UL-India No surcharge 5 working days 40% surcharge 3 working days 70% surcharge 2 working days UL-US No surcharge 50% surcharge 75% surcharge Marked with ^ are for subcontracted tests and will take longer TAT 24 hours 100% surcharge 1 working day 125% surcharge 6. 7. The below discount is offered on other individual test items when required: UL- Asia Pacific 35% UL-India 25% UL-US 25% Please note that the individual discounted prices quoted are for reference purpose only as UL local offices will charge individual items with agreed discount against the prevalent pricelists. Discount will not applicable to report minimum charge or special prices (if any). The quoted price is based on the current exchange rate in Sept 2015, the testing fees is subject to change due to the flotation exchange rate in China and other locations. Current Exchange Rate in September 2015. 1 USD = 7.76 HKD 8. 1 USD = 6.41 RMB 9 UL India has VAT service tax applicable on final amount. 10 The special offers are subject to review by the end of December 2016.