LUMELEX 0 SERIES 0/V LED XTM MM Elegant fixed downlight designed specifically for the most demanding architecture applications. Designed for the Xicato XTM mm LED module up to Watts Extremely tight color consistency (less than MacAdam Ellipses) System efficiency up to 0 lumens/watt Backed by Xicato s Five Year Color Consistency and Lumen Maintenance Warranty 0,000 hour life to 0% lumen output, L0 at F max ambient Choice of color temperature Color Rendering Index (CRI) of either (high) or (standard) Color Fidelity (Rf) (high) or (standard) Gamut Area Index (Rg) 0 (high) or 0 (standard) Choice of lumen outputs (delivered lumens) Tested to LM and LM0 Protocols, TM-0 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Field interchangeable optics (0-0 ) modify the beam spread distribution Accessory holder accepts up to two size-aa LSI filters and accessories Integral dimmer available Finishes: LSI Black, White, and Silver Fixture weight: lbs All modules are field replaceable MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: LED Module LED Rating Color Temperature Optic - mm/ beam spead Dimming LX0-XXXXX-XXXXXX-00-TEXXXX Lexan fitting for and circuit LSI track. With On/Off switch. LX0-XXXXX-XXXXXX-0E-EDXXXX Lexan fitting with integral dimmer (for use with ED dimming driver 0%). LX0-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver (<%). Voltage Finish / LX0-XXXXX-XXXXXX-G-TEXXXX C-clamp for pipes from / to O.D. With switch, -foot -wire grounding cord and NEMA -P plug. LX0-XXXXX-XXXXXX-A-XXXXXX Canopy for permanent mounting on standard octagonal junction boxes. / LX0-XXXXX-XXXXXX-G-TEXXXX Universal fitting for Unistrut Systems and any screw or bolt-up applications. With switch, -foot -wire grounding cord and NEMA -P plug. / Other Options (Consult Factory): Custom Stems, specify length ( - ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option. (track mount only) 0/ www.lightingservicesinc.com
ORDERING INFORMATION Xicato XTM mm Fixture. Choose the desired LED Module (TS) for XTM (mm) / mm (Stem only). Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (0-) for 00// (0-) for 00// (0-) for 00// (-) for 00//. Choose the code to designate the desired Color Temperature () for 00K (0) for 000K () for 00K (0) for 000K For other CCT, consult factory 0 / 0mm. Use the following alpha-numeric code to designate the Optic (N) for 0mm/0 (NR) for 0mm/0 (Field Reducer) (N) for 0mm/0 (N) for 0mm/0 (N) for 0mm/0. Select your Mounting Option (00) Track Fitting (0E) Track Fitting with Integral Dimmer (LT) Lumentalk Fitting (G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting. Choose other fixture Options: Coiled Cord is available only with G and G mounting options. Change G to C and G to C. (When a coiled cord is not specified, a straight cord is provided.) / DIA 0mm. Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (0%) (0E & A fitting only) (LT) Lumentalk (<%) (LT fitting only) (0) 0-0V (0%) (A fitting only). Choose the desired Voltage: (0) for 0V (0) for 0-0V () for V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX0 - TS - N - 00 - TE 0 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DIMMING VOLTAGE FINISH 0. Don t forget your Accessories! Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 00K 00K +/- 0K 000K 0K +/- 0K 00K 0K +/- 0K 000K 000K +/- 0K Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area T-TS - 0 T-TS - 0 ACCESSORIES ANG Hood IN AA Hood IN AA Backer Ring AAB Louver Hex AA Glass Color Filters AA Spread Lens AA0, AA, AA, AA Beam Softener AA Light Blocking Screens AA0S, AA0S, AA0S Color and Spread Gels AA LX-N0-REF-CLR (0mm/0 ) LX-NRD-REF-CLR (0mm/0 ) Field Reducer LX-N0-REF-CLR (0mm/0 ) LX-N0-REF-CLR (0mm/0 ) LX-N0-REF-CLR (0mm/0 ) www.lightingservicesinc.com Solid State 0/
LUMELEX 0 SERIES XICATO XTM MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-TS-N-00-TE0B, the TS- represents an LED module with an output of 00 lumens, a CRI of, a power usage of watts and a color temperature of 00K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the N in TS-N is a 0mm diameter optic that has a 0-Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module Absolute range of values are +/- 0% of typical value, and are for all color temperatures Optic (Reflector) Lumens/CRI/Wattage N NR N N N 00// 0 00// 00 0 00// 00 0 00// 0 Delivered Lumens LED Module Optic (Reflector) Lumens/CRI/Wattage N NR N N N 00// 00// 0 00// 0 00// 0 0 00 Efficiency = Lumens Per Watt LED Module Optic (Reflector) Lumens/CRI/Wattage N NR N N N 00// 00// 0 0 0 00// 0 0 00// LED Module Lumens/CRI/Wattage 00// 00// 00// 00// Letter Code 0-0- 0- - Nominal Fixture Power (+/- 0%), Watts Maximum Inrush Current Amps 0 0 0 0 Minimum Power Factor 0. 0. 0. 0. Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. 0/ www.lightingservicesinc.com
LUMELEX 0 SERIES XICATO XTM MM OPTICS / (mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. (mm) LX-NRD-REF-CLR (NR) (0mm/0 ) Field reducer. Proprietary field reducing baffle. / (0mm) / (0mm) / (mm) / (0mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. / (mm) / (0mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. / (mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. / (0mm) www.lightingservicesinc.com Solid State 0/
LUMELEX 0 SERIES XICATO XTM MM PHOTOMETRIC DATA LED RATING: 0- N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI NR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) 0 Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 0 CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI LED RATING: - N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI NR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) 0 Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 0 CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI All Max. Footcandles at 0 Beam Axis All Max. Footcandles at 0 Beam Axis LED RATING: 0- N (0 ) LED RATING: - N (0 ) 0 N (0 ) 0 0 NR (0 ) FR 0 0 N (0 ) 0 0 0 All Distances in Feet 0 Photometric Data based on LED Rating: 0- (00 Lumens/CRI/watts) N (0 ) 0 N (0 ) 0 0 N (0 ) 0 0 0 NR (0 ) FR 0 0 0 N (0 ) 0 0 0 All Distances in Feet 0 0 0 0 0 Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) 0/ www.lightingservicesinc.com
LUMELEX 0 ACCESSORIES HOOD IN AA inch deep hood LIGHT BLOCKING SCREENS AA Stainless steel mesh screens used alone or in combinations will block from approximately 0% to 0% of the transmitted light without changing color temperature of the light No. % of Light Blocked AA0S 0 AA0S 0 AA0S 0 ANG HOOD IN AA inch deep angled hood BACKER RING AA Stainless steel ring to hold gel when no other size AA accessories is being used. SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 0 Spread Lens/Clear ( X 0 ) Spread Lens/Clear ( X 0 ) Spread Lens/Clear (0 X 0 ) Spread Lens/Clear ( X 0 ) Beam Softener/Clear 0 ( X ) LOUVER HEX AA / thick Hexcell black metal louver used for thin profile.. Figures vary based upon LED Module/Optic being used and relationship of screen(s) to LED Module/Optic and to each other. www.lightingservicesinc.com Solid State 0/
LUMELEX 0 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: AA ( mm diameter) Spread Gel GEL-L-AA GEL-L-AA GEL-L0-AA GEL-L0-AA GEL-L0-AA GEL-L0-AA GEL-L0-AA GEL-L0-AA GEL-L0B-AA GEL-L0B-AA GEL-L0B-AA GEL-L0B0-AA GEL-LB-AA GEL-L0B0-AA GEL-R0-AA Spread Gel Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 by Spread Gel 0 by 0. Spread Gel 0 by Spread Gel 0 by 0 Spread Gel by Spread Gel 0 by 0 Spread Gel Beam Softener LumeLEX COLOR GELS Size: AA ( mm diameter) Gel Color Size: AA ( mm diameter) Gel Color GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R-AA GEL-R0-AA GEL-R0-AA GEL-R-AA GEL-R-AA GEL-R0-AA Bastard Amber Pale Yellow Straw Straw Tint Medium Straw Golden Amber Orange Red Light Red Medium Red Lavender Booster Blue Sea Blue Azure Blue Primary Green Light Grey Medium Grey Light Frost Tough Silk Light Hamburg Frost Blue Diffusion Rose Gold GEL-R-AA Canary GEL-R0-AA Half Blue GEL-R-AA Shell Pink GEL-R-AA Sapphire Blue GEL-R-AA Pale Grey GEL-R00-AA Storaro Red GEL-R00-AA Storaro Green GEL-R00-AA Storaro Violet GEL-R0-AA Full Blue GEL-R0-AA Third Blue GEL-R-AA Eighth Blue (Boosts 00K to 00K) GEL-R-AA Tough / Minusgreen GEL-R0-AA Roscosun (/ CTO) (Reduces 00K to 00K) GEL-R-AA Full Straw (CTS) GEL-R-AA Quarter Straw (CTS) GEL-R0-AA CalColor 0 Cyan GEL-R-AA CalColor Green GEL-R0-AA CalColor 0 Green GEL-R0-AA CalColor 0 Pink GEL-R0-AA CalColor 0 Pink GEL-R0-AA CalColor 0 Lavender * Backer Ring AAB required to hold gels when no other rimmed AA accesories are used. 0/ www.lightingservicesinc.com
COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA / LumeLEX 00/00/0/0, SSLCX, SSLGR, LumeLEX MAR-S AA LumeLEX 0 (with LX0-Holder or LX0-Barndoor), LumeLEX 0, LumeLEX 0, LumeLEX 0, A / LumeLEX 00, SSL0, SSLCX0, SSLGR0CL, SSLGR, B / LumeLEX MAR-L C / LumeLEX 0, LumeLEX 0, SSL, SSLCX, SSLCX, SSLGRCL Special Glass Color Filters LSI will fabricate, on special order, glass color filters in most sizes and shapes. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of / X / labeled glass and dichroic samples in a handy carrying case. % of Light No. Color Transmission 0 Medium Pink 0 Deep Pink 0 Flesh Pink 0 Pale Lavender 0 Surprise Pink 0 Lilac 0 Warm Red 0 Strawberry Ruby Magenta Light Amethyst Medium Amethyst Deep Amethyst Olive Light Green 0 Medium Green Deep Green Silver green Yellow Green Emerald Green Light Turquoise Medium Turquoise 0 Deep Turquoise Light Blue 0 Medium Blue Daylight Gene Moore Blue Grey Light Blue Green Light Amber 0 Medium Amber Deep Amber Straw Gold Canary Yellow Lemon Pumpkin Tangerine 0 Orange Pink Gold 0 Bronze Brass Autumn Tan Leaf Brown Butter Pecan Toasted Almond Notes:. Values given are approximate due to slight variations in glass color and thickness. 0/ www.lightingservicesinc.com
COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA / LumeLEX 00/00/0/0, SSLCX, SSLGR, LumeLEX MAR-S AA LumeLEX 0 (with LX0-Holder or LX0-Barndoor), LumeLEX 0, LumeLEX 0, LumeLEX 0, A / LumeLEX 00, SSL0, SSLCX0, SSLGR0CL, SSLGR, B / LumeLEX MAR-L C / LumeLEX 0, LumeLEX 0, SSL, SSLCX, SSLCX, SSLGRCL Special Glass Color Filters LSI will fabricate, on special order, dichroic glass color filters in most sizes and shapes not exceeding a diameter circle overall. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of / X / labeled glass and dichroic samples in a handy carrying case. Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 0 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 00 Light Pink 00 Medium Pink 00 Hot Pink 00 Pale Pink 00 Deep Magenta 0 Lavender 0 Vivid Magenta 0 Lavender Accent 0 Lilac 0 Purple Fusion 00 Sky Blue 0 Sea Blue 0 Cyan 0 Light Blue Green 0 0 Primary Blue 0 Medium Red Blue 0 Deep Purple 0 Peacock Blue 0 Mediterranean Blue 0 0 Boost Blue 00 Light Yellow Green 0 Fern Green 0 Turquoise 0 Primary Green 0 Industrial Green 00 Yellow 0 0 Amber 0 Amber Blush 0 Bastard Amber 0 Goldenrod 0 Bright Straw 00 Medium Orange 0 Orange 00 Flame Red 0 Primary Red www.lightingservicesinc.com Solid State 0/