GX460_bro_en_5214-5461-12_v0900.indd 1 Product Brochure 09.00 Radiomonitoring & Radiolocation Digital Wideband Storage Device Recording and device for I/Q data with up to 40 MHz bandwidth 01.04.2016 12:09:46
Digital Wideband Storage Device At a glance The compact, lightweight (AMREC) is a low-power consumption device that is ideal for use in mobile signal interception systems and in combination with the R&S AMMOS GX400 VXI based monitoring solution, R&S CA120 multichannel signal analysis and with most Rohde & Schwarz receivers and direction finders. The is the ideal solution when there is insufficient time or resources for a live scenario. Recorded signals can either be replayed through a suitable receiver or direction finder, or can be exported as a file for offline analysis, e.g. with the R&S GX410 AMLAB signal analysis software or the R&S CA100 PC-based signal analysis and signal processing software. Recordings can be controlled, and existing s can be selected and replayed via R&S RAMON. The can be equipped with either a hard disk drive (HDD) or a solid-state drive (SSD). The storage medium is easily removed for transportation or for security reasons. Equipped with a solid-state drive, the is ideal for mobile applications. Equipped with a hard disk drive, the is ideal for stationary applications. Key facts Sustained data transfer rate for baseband I/Q data with a maximum bandwidth of 10 MHz or 40 MHz Available in a non-mobile version with HDDs for stationary applications Available in a mobile version with SSDs for use in vehicles Up to 2 Tbyte of removable storage Recording of various data formats (symbol, image, audio, FFT, etc.) Various and modes, such as continuous Spectrum overview 2 GX460_bro_en_5214-5461-12_v0900.indd 2 01.04.2016 12:09:54
Digital Wideband Storage Device Benefits and key features Ideal for mobile applications Easy integration into mobile solutions Easy-to-exchange storage medium page 4 Compact data recorder with removable storage medium Compact, 3 HU, ½ 19" format The is a compact digital data and device. Its format (3 HU, ½ 19") facilitates rackmounting together with Rohde & Schwarz compact receivers, such as the R&S EB500 monitoring receiver. The stainless steel frame and solid-state storage medium make the suitable for operation under the extreme conditions encountered in mobile operations. The storage medium is simple to insert and remove, making it easy to exchange data between mobile and fixed stations. Recording and Depending on the configuration and the type of receiver or direction finder used, the is able to record scenarios that can be replayed later using the receiver or direction finder. The storage capacity is only limited by the capacity of the storage medium used. A scenario can be replayed repeatedly (loop mode). Network interface With a 1 Gbit Ethernet interface, the can be used for and scenarios with a bandwidth of up to 10 MHz and for controlling the device. Additionally, the can be configured with the following: 10 Gbit Ethernet (either electrical or optical), data transfer for the R&S ESMD or R&S DDF255; the maximum data transfer is sufficient to handle scenarios with up to 40 MHz bandwidth, see table "Interface with products from Rohde & Schwarz". Control interface The is controlled via the 1 Gbit Ethernet interface. Control interface commands supported by the include: Storage status query (free/used storage space) Query list of s Tagging of s with comments History function for facilitating the setting of comments for s in relation to time stamps Export and import of s using file transfer protocol (FTP) or via Windows (SMB) network share Deleting of specific s Attachment of a write-protect tag to specific s Navigation in large s Built-in test (BIT) performance of the power-up procedure and consistency check Query of faults log file: faults are also sent via the remote interface IF /replay control with RAMON. GX460_bro_en_5214-5461-12_v0900.indd 3 Rohde & Schwarz Digital Wideband Storage Device 3 01.04.2016 12:09:55
Ideal for mobile applications Easy integration into mobile solutions The is a lightweight (< 7 kg), low-power (< 100 W) digital wideband storage device. It can be equipped with a DC supply. The inter faces with Rohde & Schwarz receivers and direction finders to record and replay signal scenarios. In mobile solutions, the can be used to record signal scenarios online at remote locations, for subsequent offline analysis, processing, and archiving at a central station. This ensures that no emissions remain unprocessed or go undetected. Mobile devices are configured with a solid state drive to facilitate operation in environments involving high temperatures, shock, vibration, and humidity. Easy-to-exchange storage medium The uses memory packs which can be easily exchanged to facilitate data interchange between stations (e.g. between mobile and fixed stations). Rear view of the. 4 GX460_bro_en_5214-5461-12_v0900.indd 4 01.04.2016 12:10:00
System configuration Overview device R&S EB500 Maximum bandwidth 5 MHz I/Q and/or Required configuration Required mobile configuration (class C) R&S ESMD 10 MHz, -10G not available, -10G GX460-SSD, -10G 20 MHz 40 MHz R&S EM100 500 khz R&S PR100 500 khz R&S EM510 1 MHz R&S EM550 1 MHz R&S DDF255 10 MHz, -10G not available, -10G, -10G 20 MHz 40 MHz R&S CA120 250 khz R&S GX400 250 khz GX460_bro_en_5214-5461-12_v0900.indd 5 Additional receiver/direction finder options R&S RX-10G, R&S ESMD-ADC2 R&S RX-10G, R&S ESMD-ADC2, R&S ESMD-WB R&S DDF-10G, R&S DDF255-ADC2 R&S DDF-10G, R&S DDF255-WB, R&S DDF255-ADC2 Rohde & Schwarz Digital Wideband Storage Device 5 01.04.2016 12:10:00
System examples Up to 10 MHz with the R&S ESMD wideband monitoring receiver and the R&S RAMON COMINT/CESM software Recording of scenarios with up to 10 MHz bandwidth 2 Tbyte () or 1.9 Tbyte () storage capacity 1 Gbit interface Required options: or Up to 40 MHz with the R&S ESMD wideband monitoring receiver Recording of scenarios with up to 40 MHz bandwidth Parallel of four DDC I/Q data streams up to 1 MHz Mobile (class C) with 2 Tbyte storage capacity 10 Gbit and 1 Gbit interface Required options -10G Required R&S ESMD options R&S RX-10G R&S ESMD-WB R&S ESMD-ADC2 R&S ESMD-DDC Up to 10 MHz 1 Gbit interface Up to 40 MHz 1 Gbit interface 1 Gbit and 10 Gbit interface 6 GX460_bro_en_5214-5461-12_v0900.indd 6 01.04.2016 12:10:05
Specifications in brief Simultaneous and can simultaneously record and replay: Up to 128 signals with 30 khz bandwidth via 1 Gbit LAN or Up to 32 signals with 300/500 khz bandwidth via 1 Gbit LAN or Up to 20 signals with 1 MHz bandwidth via 1 Gbit LAN or Up to 4 signals with 5 MHz bandwidth via 1 Gbit LAN or 2 signals with 10 MHz bandwidth via 1 Gbit LAN or 2 signals with max. 20 MHz bandwidth via 10 Gbit LAN or 1 signal with max. 40 MHz bandwidth via 10 Gbit LAN Interface with products from Rohde & Schwarz Product R&S EB500 R&S ESMD (FFM) R&S DDF255 (receive mode) R&S PR100, R&S EM100 R&S EM510, R&S EM550 R&S GX400 R&S CA120 5 MHz 10 MHz 10 MHz 500 khz 1 MHz 250 khz 300 khz -10G 20 MHz 40 MHz 1) Recording I/Q 20 MHz 40 MHz 1) Replaying I/Q option/feature = not available, = yes, = no. Only available with the option. 1) Ordering information Designation Type Order No. Digital Wideband Storage Device, base unit; for and scenarios up to 10 MHz bandwidth; RAMON AMREC manager included NOTE: Please see table above Storage medium (one storage medium per device) 1513.4600.80 Hard Disk Drive (HDD), 2 Tbyte storage capacity 4094.8106.20 High-Speed, Rugged Solid-State Drive (SSD), 1.9 Tbyte storage capacity 4094.8112.20 Option for and scenarios with up to 40 MHz bandwidth; one 10 Gbit network interface card with software and -CCG option included NOTE: Please see table above Auxiliary equipment -10G 4094.8306.03 DC Power Supply, including power cable: 10 V to 30 V DC, 200 VA R&S PSDC-B200 1513.4617.02 Copper Cable, for 10 Gbit and two transceivers, length 5 m -CCG 4094.8635.02 Optical Cable, for 10 Gbit and two optical transceivers, length 20 m -OCG 4094.8641.02 Base unit (delivered with accessories such as power cable, manual) Interface For data sheet, see PD 5214.5461.22 and www.rohde-schwarz.com GX460_bro_en_5214-5461-12_v0900.indd 7 Rohde & Schwarz Digital Wideband Storage Device 7 01.04.2016 12:10:05
Service that adds value Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability About Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, radiomonitoring and radiolocation. Founded more than 80 years ago, this independent company has an extensive sales and service network and is present in more than 70 countries. The electronics group is among the world market leaders in its established business fields. The company is headquartered in Munich, Germany. It also has regional headquarters in Singapore and Columbia, Maryland, USA, to manage its operations in these regions. Sustainable product design Environmental compatibility and eco-footprint Energy efficiency and low emissions Longevity and optimized total cost of ownership Certified Quality Management ISO 9001 Certified Environmental Management ISO 14001 Rohde & Schwarz GmbH & Co. KG www.rohde-schwarz.com R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG Trade names are trademarks of the owners PD 5214.5461.12 Version 09.00 March 2016 (fi) Digital Wideband Storage Device Data without tolerance limits is not binding Subject to change 2011-2016 Rohde & Schwarz GmbH & Co. KG 81671 Munich, Germany 5214.5461.12 09.00 PDP 1 en Regional contact Europe, Africa, Middle East +49 89 4129 12345 customersupport@rohde-schwarz.com North America 1 888 TEST RSA (1 888 837 87 72) customer.support@rsa.rohde-schwarz.com Latin America +1 410 910 79 88 customersupport.la@rohde-schwarz.com Asia Pacific +65 65 13 04 88 customersupport.asia@rohde-schwarz.com China +86 800 810 82 28 +86 400 650 58 96 customersupport.china@rohde-schwarz.com 5214546112 GX460_bro_en_5214-5461-12_v0900.indd 8 01.04.2016 12:10:06