PANEL RADIATORS - TECHNICAL MANUAL

Product Instructions PANEL RADIATORS - TECHNICAL MANUAL GENERAL Page -Product survey 2 -Approvals & warranty 2-2 -Heat outputs 2 -Powder coating process & colors 2 -Transportation, storing and handling 3 -Packing and loading on pallets 3 -Installation recommendations 4 -Series loop systems 4 -Pedestal mounting 4 -Description 5 -Types 6 -Connections 6 -Dimensions 7 -Installation 8-9 -Colors 10 -Heat outputs, volume, weight & n-exponent 11-16 -Pressure drop 17 RAD TECHN-2016 1

PANEL RADIATORS PRODUCT SURVEY GENERAL Plainor Compact Vertical side covers top grill assembly points n connections 6 6 4 4 / 6 supply and return pipes invisible thermostatic valve body included hangers assembly packaging bore template HEAT EMISSIONS Measured in accordance with EN 442 An exceptionally high heat emission equally spread across the room. Lower water volume. Fast heat recovery. Accurate thermostatic control. Cost-effective use. APPROVALS & WARRANTY In the manufacturing of the radiators, the highest quality standards are set. standards. The Radiator quality and heat emission outputs have been tested and listed by the following institutes: This translates to a 5-year warranty, after installation, provided that the proper system pressure and installation procedures are adhered to. SPECIFICATIONS All radiators are manufactured with cold rolled, high quality steel plate according to DIN 1623 and EN 10130. Thickness of the steel is.05 [1.25 mm.] Some models come standard with a 2 on center (50 mm) left or right rough in connection. Test pressure 117 psig [8 bar[ Working pressure 88 psig [6 bar] POWDER COATING PROCESS & COLORS The surface of the radiator is treated in three stages: a primer coat treatment As part of the pre-treatment, each radiator is fully degreased. This process ensures optimal bonding of the primer coat. The phosphate coat and the primer offer maximum protection against oxidation. The next step is the rinsing each radiator in a de-mineralized water bath. the radiators are painted with a process similar to that in a modern automobile factory. The radiators are degreased, phosphate treated, primed (using electrophoretic KTL-bath), and then dried at 390 F (200 C). Finally, every radiator is painted through an electrostatic powder coating process with epoxy polyesters and enameled at 450 F (230 C) resulting in a brilliance of approximately 70%. Standard color is white RAL 9016. Other RAL powder coat colors are available at additional cost. 2

GENERAL TRANSPORTATION / STORING / STACKING Improper transportation, storing and handling can lead to damage and the possibility of the radiator leaking. Special care should be taken for long radiators and should not be placed or transported horizontally on pallets or skids that are smaller than the actual radiator itself. Smaller radiators should not be placed or transported on the outer parts of longer radiators as the longer radiators can be damaged and edges bent. Common sense should be applied in supporting and re-packaging of the radiators. Do not store the radiators in an exterior environment subject to sun, and weather conditions without protective covering. If moisture is seen inside the packaging, open and dry. PACKAGING & LOADING ON PALLETS Type Number per pallet 11 8 21 8 22 8 33 5 The radiators are protected on 4 sides with cardboard, inclusive of corner edge protection and are shrink-wrapped. The radiators remain inside their packaging until installation to prevent damage. The entire packaging is recyclable. 3

GENERAL INSTALLATION RECOMMENDATIONS When installing a radiator against a sheet rock wall, attach the hangers to the wood studs in the wall whenever possible. Reversible radiators have the convenience of locating the hanger with the studs. Reversible radiators are only available in 21S, 22 In this event, backing should be provided for proper installation. it is SERIES LOOP SYSTEMS The panel radiators can also be used in series loop systems with by- a radiator can be removed without interrupting the operation of the radiators after the rough. This allows for the complete operation of painting and easily purged and put into operation without affecting the heating system. Allow 2 center to center below the radiator to accommodate the should be set to its highest setting (6, which is the factory setting) in PEDESTAL MOUNTING In order to prevent excessive heat loss of radiators be installed between the window and the radiator available at additional cost. Reflecting Panel Window 4

DESCRIPTION Powder coating process is in correspondence to the DIN 55900 norm and EN 442 (emission free): Preparation: degreasing, phosphate layer and rinsing with De-mineralized-water. 1st coating process: applying the primer coating according to the cataphoresis process. Final coat: according to the epoxy-polyester powder principal. Standard color is RAL 9016, white. An extensive range RAL-colors are available (at extra charge).. What does the name mean? Integrated valve & piping system. Thanks to its design, the supply and return connection is concealed behind the cover and is no longer visible from the side of the radiator. The supply and return pipes are located at the bottom right (or left if a REV model) and the radiator. The Cv-adjustable thermostatic valve body, factory installed-1 rotating air vent. Connections: 2 -½ BSP female pipe opening at the bottom right ( or left). Heating supply inlet will always be the inside connection to the radiator on the Integra. There are also four other ½ BSP side connections, left and right on the radiator as alternate return connections only. radiators are made for two pipe heating systems. valve, caution should be used for pipe size, and BTU capacities on a single loop. For more information, contact our technical department. Packaging: protected with cardboard, corner protected and shrink-wrapped. Quality is guaranteed by TÜV Rheinland, RAL-label and BSI (EN ISO 9002) and meets the BAGUV-norm for the types with covers. Work pressure: 88 psig [6 bar] Medium: hot water up to 230 F [110 C] 2" 1 3 /16 Supply Return 5

TYPES Height (inch) 11 ¾'' 15 ¾'' Height (mm) 300 400 500 600 900 Width (inch) 15 ¾'' 27 ½'' 31 ½'' 43 ¼'' 47 ¼'' 59'' 63'' 74 ¾'' 78 ¾'' 94 ½'' 110 ¼'' Width (mm) 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2200 2400 2600 2800 3000 Test pressure 118 psig [8 bar] Work pressure 88psig [6 bar] Connections 6 ½ BSP BTU capacity measured in accordance with EN 442 (European standard converted from Watts to BTU s) Hanging hardware: 4 or 6 welded lugs to received hangers, except for the reversible type 21, 22 and 33 2'' [51] 4 ⅜'' [111] 6 ⅜'' [162] 4'' [102] 2 ¾'' [70] 2 ⅝'' [68] 3 ⅜'' [86] 3 ⅜'' [86] Type 11 Type 21 Type 22 Type 33 4 ⅜'' [111] 2'' [51] 2'' [51] 1 ⅜'' [37] 6 ⅜'' [162] Accessories: 1 stop, 1 rotating air vent, (2 or 3 L-consoles,screws and wall plugs are in the packaging and are inclusive in the price for type 11) Accessories: Floor standing brackets, screening plate and towel rack + see price-list. Packaging: solid packaging of cardboard shrink-wrapped with corner guards and edge protection CONNECTIONS Every radiator is equipped with 6 connections ½ BSP (European threads). Right - other connections are not possible The Kv-adjustable integrated valve insert, the stop and the air vent are installed at the factory. All radiators are equipped with an integrated supply and return on the right hand side of the radiator. This is the standard connection. Left hand radiators available by special order. Please allow 6-8 weeks for special orders. models are also available in Reversible style. With no welded lugs on the radiator, it can be installed in a right or left The valve body is at the right top of the radiator, on the left top when having left version. If you have any questions regarding rough in s, please contact the technical department. 6

DIMENSIONS H C B inch mm inch mm inch mm 11 ¾'' 300 85 9 ¾'' 249 15 ¾'' 400 7 ¼'' 185 13 ¾'' 349 500 11 ¼'' 285 449 600 385 549 27 ½'' 700 485 25 ½'' 649 31 ½'' 800 23'' 585 29 ½'' 749 900 27'' 685 849 2 [50] Type A E D inch mm inch mm inch mm 11 117 4 ¾'' 120 1'' 26 21 4 ¾'' 120 1'' 26 22 no lugs 4 ¾'' 120 1'' 26 33 4 ¾'' 120 1'' 26 1 ⅛'' [30] 1 ¾' [45] 2 ⅝'' [68] 1 ¾'' [44] 2 ⅜'' [59] 1 ⅛'' [30] 2 ¾'' [73] 1 ⅛'' [30] 2 ⅜'' [60] 3'' [76] 4'' [102] 1 ⅛'' [30] 3'' [76] 6 ⅜'' [162] 1 ⅛'' [30] 6 ⅜'' [162] 5 ¼'''' [133] a b a b min. 3 ⅞'' [min. 100] min. 3 ⅞'' [min. 100] TYPE 11 TYPE 21 TYPE 22 TYPE 33 R INSTALLATION are equipped with 4 or 6 welded-on hanging lugs at the rear. (6 pieces from L 65 [1650 mm]) The wall hangers are of the type MCW angular bracket - equipped with an acoustic lining in Nylon. The radiators can be supported without the hanger or other attachments visible. min. 3 ⅞'' [min. 100] min. 3 ⅞'' [min. 100] TYPE 33 L min. 3 ⅞'' [min. 100] c TYPE 11 c TYPE 21~ 33 WALL DISTANCE a c inch mm inch mm inch mm 11 narrow assembly 98 1 ¾'' 44 30 11 wide assembly 4 ½'' 113 59 1 ¾'' 45 100 60 30 5 ¼'' 132 3'' 76 30 right connnection 7 ½'' 192 3'' 76 30 left connection 7 ½'' 192 5 ¼'' 133 30 L-brackets., the wall hangers are of the type HKD. The number of hangers used on a radiator depends of the length and weight of the radiator. Pedestal mounts are available for any type of radiator. HKD Floor stand covers 7

INSTALLATION INSTRUCTIONS IMPORTANT INFORMATION This product is for use with hydronic heating systems connected to boilers or oxygen dead hydraulic systems with system separation. This product should never be installed with open systems. This radiator should be inspected for damage before installing on the wall. This product is provided for heating professionals and related trades. Please do not lift the radiator by the top grille or side panel as cosmetic damage can occur. Please note that style 11 radiators are right hand connection only unless special ordered left hand. The connections on all opening of the radiator are ½ BSP connections; please consult the Hydronic Alternatives radiator accessory sheet for appropriate BSP to FPT, Pex or copper connections. PACK CONTENTS 1 radiator 2 chrome blanking plugs 2 wall brackets (unassembled) 1 air bleed key 1 air bleeder 4 bracket buffers (11 series only) 1 integrated valve INSTALLATION INSTRUCTIONS Remove packaging and visibly inspect the radiator for damage before installing. Note that type 21, 22 and 33 are reversible and will have hangers installed in the packaging and will require assembly. (Please refer to page (2) of this document for assembly There is an accessory pack which includes the Integrated Valve, Air Bleeder, (2) Chrome Plugs and mounting hardware located inside the packaging at the bottom of the radiator that will need to be installed. If you receive a radiator with a Red Dot on the outer packaging, the hangers will come preassembled separately with Integrated Valve, Air Bleeder & Chrome Plugs already installed on the radiator requiring tightening only. The cardboard, polyethylene and corner protectors are all recyclable. Select your desired installation location and check that there are no water pipes or electrical wires behind the location where the holes need to be made for the radiator hanger. Note the hangers can be fastened to existing wood studs or lagged into masonry walls using appropriate anchors. If wall studs cannot be used, backing should and ease of making your supply and return connections. Once the hangers have been assembled and mounted on the wall, position the radiator spring clip so that the ears connect in between the grille spaces. Once the spring clip has snapped into position the supply and return connections can be safely made. If the spring clip is not properly engaged the possibility of the radiator coming loose from the wall could occur. Make sure the spring clip on the hanger assembly is properly engaged before proceeding with the heating system connections. can begin. Please note that all connections on our radiators are BSP or parallel thread. Consult the Radiator Accessory price sheet to select the appropriate BSP to North size is appropriate to support the BTU capacity and that your pump will be able to overcome the total dynamic head of the pressure drop through the piping, radiator and direct sunlight for PE RT or Pex tubing should be taken. UV degradation can occur over time and premature failure of the piping can occur. In the radiator Accessory price sheet 8

Once the radiator is connected to your heating system air must be removed from the unit. Each radiator is provided with a coin vent. If the radiator is installed with a home run manifold system then purging can take place at the manifold. If piped with copper the air which will impact the performance of the system. Note that the integral valve installed to receive the non-electric thermostat has a built in it will be self-regulating and position 6 should be use. #6 is the default position and sometimes during the installation of the non-electric thermostat the position can get changed. Please verify that position #6 is set before installing your thermostat. If installed on the return side. Check all connections for leaks. Remember leaks cause fresh water to be added to the system and will cause corrosion. Also, small leaks will deteriorate the powder coat Note: It is highly recommended that a non-electric thermostat be installed to protect the radiator against excessive surface temperature. The introduction of the non-electric thermostatic head enhances the overall quality of the product providing a higher level of comfort and the ability to control the temperature at each radiator location which will save on your overall energy use. We highly recommend the installation of this device. Remove the Integreated Valve, Air Bleeder & Chrome plugs from the radiator packaging. Install the Integrated Valve in the radiator at the top on the same side where the 2" on center bottom connections are located. Install the Air Bleeder on the opposite side of the radiator at the top directly across from the Integrated Valve. Install the chrome plugs (2) in the lower side ports. Overtightening is not necessary, damage can occur to the O-rings. CARE AFTER INSTALLATION 9

COLORS INTERN. INTERN. INTERN. INTERN. RAL 1000 RAL 3014 RAL 6005 RAL 7030 RAL 1001 RAL 3015 RAL 6006 RAL 7031 RAL 1002 RAL 3016 RAL 6007 RAL 7032 RAL 1003 RAL 3017 RAL 6008 RAL 7033 RAL 1004 RAL 3018 RAL 6009 RAL 7034 RAL 1005 RAL 3020 RAL 6010 RAL 7035 RAL 1006 RAL 3022 RAL 6011 RAL 7036 RAL 1007 RAL 3027 RAL 6012 RAL 7037 RAL 1011 RAL 3031 RAL 6013 RAL 7038 RAL 1012 RAL 4001 RAL 6014 RAL 7039 RAL 1013 RAL 4002 RAL 6015 RAL 7040 RAL 1014 RAL 4003 RAL 6016 RAL 7042 RAL 1015 RAL 4004 RAL 6017 RAL 7043 RAL 1016 RAL 4005 RAL 6018 RAL 7044 RAL 1017 RAL 4006 RAL 6019 RAL 7045 RAL 1018 RAL 4007 RAL 6020 RAL 7046 RAL 1019 RAL 4008 RAL 6021 RAL 7047 RAL 1020 RAL 4009 RAL 6022 RAL 8000 RAL 1021 RAL 4010 RAL 6024 RAL 8001 RAL 1023 RAL 5000 RAL 6025 RAL 8002 RAL 1024 RAL 5001 RAL 6026 RAL 8003 RAL 1027 RAL 5002 RAL 6027 RAL 8004 RAL 1028 RAL 5003 RAL 6028 RAL 8007 RAL 1032 RAL 5004 RAL 6029 RAL 8008 RAL 1033 RAL 5005 RAL 6032 RAL 8011 RAL 1034 RAL 5007 RAL 6033 RAL 8012 RAL 2000 RAL 5008 RAL 6034 RAL 8014 RAL 2001 RAL 5009 RAL 7000 RAL 8015 RAL 2002 RAL 5010 RAL 7001 RAL 8016 RAL 2003 RAL 5011 RAL 7002 RAL 8017 RAL 2004 RAL 5012 RAL 7003 RAL 8019 RAL 2008 RAL 5013 RAL 7004 RAL 8022 RAL 2009 RAL 5014 RAL 7005 RAL 8023 RAL 2010 RAL 5015 RAL 7006 RAL 8024 RAL 2011 RAL 5017 RAL 7008 RAL 8025 RAL 2012 RAL 5018 RAL 7009 RAL 8028 RAL 3000 RAL 5019 RAL 7010 RAL 9001 RAL 3001 RAL 5020 RAL 7011 RAL 9002 RAL 3002 RAL 5021 RAL 7012 RAL 9003 RAL 3003 RAL 5022 RAL 7013 RAL 9004 RAL 3004 RAL 5023 RAL 7015 RAL 9005 RAL 3005 RAL 5024 RAL 7016 RAL 9006 RAL 3007 RAL 6000 RAL 7021 RAL 9007 RAL 3009 RAL 6001 RAL 7022 RAL 9011 RAL 3011 RAL 6002 RAL 7023 RAL 9016 RAL 3012 RAL 6003 RAL 7024 RAL 9017 RAL 3013 RAL 6004 RAL 7026 RAL 9018 10

Height Width Heat emissions @ AWT Weight Volume n mm inch mm inch 180 F 140 F kg lbs liter gallon exponent INT-11-300 0400 400 15 ¾'' 1004 564 4.73 10.43 0.11 0.03 1.396 INT-11-300 0500 500 1258 707 5.59 12.31 0.27 0.07 1.396 INT-11-300 0600 600 1506 846 6.43 14.17 0.53 0.14 1.396 INT-11-300 0700 700 27 ½'' 1760 989 7.27 16.02 0.88 0.23 1.396 INT-11-300 0800 800 31 ½'' 2009 1129 8.12 17.90 1.26 0.33 1.396 INT-11-300 0900 900 2262 1271 8.96 19.76 1.58 0.42 1.396 INT-11-300 1000 1000 2515 1413 9.81 21.63 1.76 0.46 1.396 INT-11-300 1100 300 11 ¾ 1100 43 ¼'' 2764 1553 10.66 23.51 1.93 0.51 1.396 INT-11-300 1200 1200 3018 1696 11.50 25.36 2.11 0.56 1.396 INT-11-300 1300 1300 3266 1835 12.34 27.21 2.28 0.60 1.396 INT-11-300 1400 1400 3520 1978 13.20 29.10 2.46 0.65 1.396 INT-11-300 1500 1500 59 3768 2117 14.04 30.95 2.63 0.70 1.396 INT-11-300 1600 1600 63'' 4022 2260 14.89 32.84 2.81 0.74 1.396 INT-11-300 1700 1700 4271 2399 15.90 35.06 2.98 0.79 1.396 INT-11-300 1800 1800 4524 2542 16.74 36.91 3.16 0.83 1.396 INT-11-400 0400 400 15 ¾'' 1034 581 5.98 13.19 0.87 0.23 1.301 INT-11-400 0500 500 1291 725 7.11 15.68 1.09 0.29 1.301 INT-11-400 0600 600 1553 872 8.22 18.13 1.30 0.34 1.301 INT-11-400 0700 700 27 ½'' 1810 1017 9.34 20.59 1.52 0.40 1.301 INT-11-400 0800 800 31 ½'' 2068 1162 10.47 23.08 1.74 0.46 1.301 INT-11-400 0900 900 2325 1306 11.58 25.54 1.95 0.52 1.301 INT-11-400 1000 1000 2587 1453 12.71 28.02 2.17 0.57 1.301 INT-11-400 1100 400 15 ¾ 1100 43 ¼'' 2844 1598 13.83 30.50 2.39 0.63 1.301 INT-11-400 1200 1200 3101 1742 14.95 32.95 2.60 0.69 1.301 INT-11-400 1300 1300 3359 1887 16.06 35.41 2.82 0.75 1.301 INT-11-400 1400 1400 3620 2034 17.19 37.90 3.04 0.80 1.301 INT-11-400 1500 1500 59 3878 2179 18.31 40.36 3.26 0.86 1.301 INT-11-400 1600 1600 63'' 4135 2323 19.43 42.84 3.47 0.92 1.301 INT-11-400 1700 1700 4392 2467 20.75 45.74 3.69 0.97 1.301 INT-11-400 1800 1800 4654 2615 21.86 48.19 3.91 1.03 1.301 INT-11-500 0400 400 15 ¾'' 1477 830 7.30 16.09 1.06 0.28 1.289 INT-11-500 0500 500 1846 1037 8.71 19.20 1.33 0.35 1.289 INT-11-500 0600 600 2215 1244 10.10 22.28 1.59 0.42 1.289 INT-11-500 0700 700 27 ½'' 2589 1454 11.50 25.35 1.86 0.49 1.289 INT-11-500 0800 800 31 ½'' 2958 1662 12.91 28.46 2.12 0.56 1.289 INT-11-500 0900 900 3327 1869 14.30 31.53 2.39 0.63 1.289 INT-11-500 1000 1000 3696 2076 15.71 34.64 2.65 0.70 1.289 INT-11-500 1100 500 1100 43 ¼'' 4065 2284 17.12 37.74 2.92 0.77 1.289 INT-11-500 1200 1200 4434 2491 18.51 40.81 3.18 0.84 1.289 INT-11-500 1300 1300 4804 2699 19.91 43.89 3.45 0.91 1.289 INT-11-500 1400 1400 5173 2906 21.32 46.99 3.71 0.98 1.289 INT-11-500 1500 1500 59 5542 3113 22.71 50.07 3.98 1.05 1.289 INT-11-500 1600 1600 63'' 5911 3321 24.12 53.17 4.24 1.12 1.289 INT-11-500 1700 1700 6280 3528 25.76 56.78 4.51 1.19 1.289 INT-11-500 1800 1800 6649 3735 27.15 59.86 4.77 1.26 1.289 INT-11-600 0400 400 15 ¾'' 1831 1029 8.58 18.91 1.24 0.33 1.308 INT-11-600 0500 500 2292 1288 10.26 22.62 1.55 0.41 1.308 INT-11-600 0600 600 2749 1544 11.93 26.30 1.86 0.49 1.308 INT-11-600 0700 700 27 ½'' 3205 1801 13.60 29.98 2.17 0.57 1.308 INT-11-600 0800 800 31 ½'' 3667 2060 15.28 33.69 2.48 0.66 1.308 INT-11-600 0900 900 4123 2316 16.95 37.37 2.79 0.74 1.308 INT-11-600 1000 1000 4580 2573 18.63 41.07 3.10 0.82 1.308 INT-11-600 1100 600 1100 43 ¼'' 5041 2832 20.31 44.78 3.41 0.90 1.308 INT-11-600 1200 1200 5498 3089 21.98 48.46 3.72 0.98 1.308 INT-11-600 1300 1300 5954 3345 23.65 52.13 4.03 1.06 1.308 INT-11-600 1400 1400 6415 3604 25.33 55.84 4.34 1.15 1.308 INT-11-600 1500 1500 59 6872 3861 27.00 59.52 4.65 1.23 1.308 INT-11-600 1600 1600 63'' 7329 4117 28.68 63.23 4.96 1.31 1.308 INT-11-600 1700 1700 7790 4376 30.64 67.54 5.27 1.39 1.308 INT-11-600 1800 1800 8246 4633 32.31 71.22 5.58 1.47 1.308 INT-11-900 0400 400 15 ¾'' 2093 1176 12.47 27.50 1.79 0.47 1.308 INT-11-900 0500 500 2618 1471 14.98 33.02 2.24 0.59 1.308 INT-11-900 0600 600 3138 1763 17.47 38.52 2.68 0.71 1.308 INT-11-900 0700 700 27 ½'' 3662 2057 19.97 44.02 3.13 0.83 1.308 INT-11-900 0800 800 31 ½'' 4186 2352 22.47 49.55 3.58 0.94 1.308 INT-11-900 0900 900 4711 2647 24.97 55.05 4.02 1.06 1.308 INT-11-900 1000 1000 5231 2939 27.48 60.59 4.47 1.18 1.308 INT-11-900 1100 900 1100 43 ¼'' 5755 3233 29.99 66.11 4.92 1.30 1.308 INT-11-900 1200 1200 6280 3528 32.48 71.60 5.36 1.42 1.308 INT-11-900 1300 1300 6800 3820 34.97 77.10 5.81 1.54 1.308 INT-11-900 1400 1400 7324 4115 37.48 82.63 6.26 1.65 1.308 INT-11-900 1500 1500 59 7848 4409 39.97 88.13 6.71 1.77 1.308 INT-11-900 1600 1600 63'' 8373 4704 42.48 93.66 7.15 1.89 1.308 INT-11-900 1700 1700 8893 4996 45.39 100.08 7.60 2.01 1.308 INT-11-900 1800 1800 9417 5290 47.89 105.58 8.05 2.13 1.308 11

Height Width Heat emissions @ AWT Weight Volume n mm inch mm inch 180 F 140 F kg lbs liter gallon exponent INT-21-300 0400 400 15 ¾'' 1367 768 7.00 15.43 1.38 0.36 1.268 INT-21-300 0500 500 1708 960 8.39 18.50 1.72 0.45 1.268 INT-21-300 0600 600 2053 1153 9.78 21.56 2.06 0.55 1.268 INT-21-300 0700 700 27 ½'' 2393 1344 11.17 24.62 2.41 0.64 1.268 INT-21-300 0800 800 31 ½'' 2734 1536 12.56 27.68 2.75 0.73 1.268 INT-21-300 0900 900 3075 1728 14.00 30.87 3.10 0.82 1.268 INT-21-300 1000 1000 3420 1921 15.41 33.97 3.44 0.91 1.268 INT-21-300 1100 1100 43 ¼'' 3760 2112 16.79 37.02 3.78 1.00 1.268 INT-21-300 1200 1200 47¼ 4101 2304 18.18 40.08 4.13 1.09 1.268 INT-21-300 1300 1300 4442 2496 19.57 43.15 4.47 1.18 1.268 INT-21-300 1400 1400 4787 2689 21.02 46.34 4.82 1.27 1.268 300 11 ¾ INT-21-300 1500 1500 59 5127 2880 22.41 49.40 5.16 1.36 1.268 INT-21-300 1600 1600 63'' 5468 3072 23.79 52.46 5.50 1.45 1.268 INT-21-300 1700 1700 5809 3263 25.35 55.89 5.85 1.54 1.268 INT-21-300 1800 1800 6154 3457 26.74 58.95 6.19 1.64 1.268 INT-21-300 1900 1900 74 ¾'' 6494 3648 28.19 62.14 6.54 1.73 1.268 INT-21-300 2000 2000 78 ¾'' 6835 3840 29.59 65.23 6.88 1.82 1.268 INT-21-300 2200 2200 7521 4225 32.36 71.35 7.57 2.00 1.268 INT-21-300 2400 2400 94 ½ 8202 4608 35.14 77.47 8.26 2.18 1.268 INT-21-300 2600 2600 8888 4993 37.98 83.73 8.94 2.36 1.268 INT-21-300 2800 2800 110 ¼'' 9569 5376 40.76 89.85 9.63 2.54 1.268 INT-21-300 3000 3000 10255 5761 43.54 96.00 10.32 2.73 1.268 INT-21-400 0400 400 15 ¾'' 1658 931 9.01 19.86 1.69 0.45 1.305 INT-21-400 0500 500 2074 1165 10.86 23.93 2.11 0.56 1.305 INT-21-400 0600 600 2489 1398 12.70 28.00 2.53 0.67 1.305 INT-21-400 0700 700 27 ½'' 2900 1629 14.55 32.07 2.95 0.78 1.305 INT-21-400 0800 800 31 ½'' 3316 1863 16.39 36.14 3.38 0.89 1.305 INT-21-400 0900 900 3732 2097 18.29 40.33 3.80 1.00 1.305 INT-21-400 1000 1000 4147 2330 20.16 44.44 4.22 1.11 1.305 INT-21-400 1100 1100 43 ¼'' 4559 2561 22.00 48.50 4.64 1.23 1.305 INT-21-400 1200 1200 47¼ 4974 2794 23.84 52.57 5.06 1.34 1.305 INT-21-400 1300 1300 5390 3028 25.69 56.64 5.49 1.45 1.305 INT-21-400 1400 1400 5805 3261 27.59 60.83 5.91 1.56 1.305 400 15 ¾ INT-21-400 1500 1500 59 6221 3495 29.44 64.90 6.33 1.67 1.305 INT-21-400 1600 1600 63'' 6632 3726 31.28 68.97 6.75 1.78 1.305 INT-21-400 1700 1700 7048 3960 33.33 73.47 7.17 1.90 1.305 INT-21-400 1800 1800 7464 4193 35.17 77.54 7.60 2.01 1.305 INT-21-400 1900 1900 74 ¾'' 7879 4426 37.08 81.74 8.02 2.12 1.305 INT-21-400 2000 2000 78 ¾'' 8290 4657 38.94 85.84 8.44 2.23 1.305 INT-21-400 2200 2200 9122 5125 42.63 93.97 9.28 2.45 1.305 INT-21-400 2400 2400 94 ½ 9948 5589 46.32 102.11 10.13 2.68 1.305 INT-21-400 2600 2600 10780 6056 50.07 110.38 10.97 2.90 1.305 INT-21-400 2800 2800 110 ¼'' 11611 6523 53.76 118.51 11.82 3.12 1.305 INT-21-400 3000 3000 12438 6988 57.46 126.68 12.66 3.34 1.305 INT-21-500 0400 400 15 ¾'' 2019 1134 11.05 24.36 2.06 0.54 1.304 INT-21-500 0500 500 2525 1419 13.36 29.45 2.58 0.68 1.304 INT-21-500 0600 600 3031 1703 15.67 34.54 3.09 0.82 1.304 INT-21-500 0700 700 27 ½'' 3532 1984 17.98 39.63 3.61 0.95 1.304 INT-21-500 0800 800 31 ½'' 4038 2269 20.28 44.72 4.12 1.09 1.304 INT-21-500 0900 900 4544 2553 22.65 49.94 4.64 1.22 1.304 INT-21-500 1000 1000 5050 2837 24.98 55.07 5.15 1.36 1.304 INT-21-500 1100 1100 43 ¼'' 5551 3119 27.29 60.16 5.67 1.50 1.304 INT-21-500 1200 1200 47 ¼ 6057 3403 29.59 65.24 6.18 1.63 1.304 INT-21-500 1300 1300 6563 3687 31.90 70.34 6.70 1.77 1.304 INT-21-500 1400 1400 7069 3971 34.27 75.55 7.21 1.90 1.304 500 INT-21-500 1500 1500 59 7570 4253 36.58 80.64 7.73 2.04 1.304 INT-21-500 1600 1600 63'' 8076 4537 38.89 85.73 8.24 2.18 1.304 INT-21-500 1700 1700 8582 4821 41.44 91.36 8.76 2.31 1.304 INT-21-500 1800 1800 9087 5105 43.75 96.45 9.27 2.45 1.304 INT-21-500 1900 1900 74 ¾'' 9589 5387 46.11 101.66 9.79 2.58 1.304 INT-21-500 2000 2000 78 ¾'' 10095 5671 48.44 106.79 10.30 2.72 1.304 INT-21-500 2200 2200 11106 6239 53.06 116.97 11.33 2.99 1.304 INT-21-500 2400 2400 94 ½ 12114 6806 57.68 127.15 12.36 3.27 1.304 INT-21-500 2600 2600 13125 7374 62.35 137.46 13.39 3.54 1.304 INT-21-500 2800 2800 110 ¼'' 14133 7940 66.97 147.64 14.42 3.81 1.304 INT-21-500 3000 3000 15144 8508 71.60 157.86 15.45 4.08 1.304 12

Height Width Heat emissions @ AWT Weight Volume n mm inch mm inch 180 F 140 F kg lbs liter gallon exponent INT-21-600 0400 400 15 ¾'' 2365 1329 13.06 28.79 2.41 0.64 1.256 INT-21-600 0500 500 2959 1662 15.82 34.89 3.01 0.80 1.256 INT-21-600 0600 600 3549 1994 18.59 40.98 3.61 0.95 1.256 INT-21-600 0700 700 27 ½'' 4139 2325 21.36 47.08 4.21 1.11 1.256 INT-21-600 0800 800 31 ½'' 4730 2657 24.12 53.18 4.82 1.27 1.256 INT-21-600 0900 900 5324 2991 26.94 59.40 5.42 1.43 1.256 INT-21-600 1000 1000 5914 3322 29.73 65.55 6.02 1.59 1.256 INT-21-600 1100 1100 43 ¼'' 6504 3654 32.50 71.64 6.62 1.75 1.256 INT-21-600 1200 1200 47¼ 7099 3988 35.26 77.73 7.22 1.91 1.256 INT-21-600 1300 1300 7689 4320 38.02 83.83 7.83 2.07 1.256 INT-21-600 1400 1400 8279 4651 40.85 90.05 8.43 2.23 1.256 600 INT-21-600 1500 1500 59 8873 4985 43.61 96.15 9.03 2.39 1.256 INT-21-600 1600 1600 63'' 9464 5317 46.38 102.25 9.63 2.54 1.256 INT-21-600 1700 1700 10054 5648 49.43 108.97 10.23 2.70 1.256 INT-21-600 1800 1800 10648 5982 52.19 115.07 10.84 2.86 1.256 INT-21-600 1900 1900 74 ¾'' 11238 6313 55.02 121.29 11.44 3.02 1.256 INT-21-600 2000 2000 78 ¾'' 11828 6645 57.80 127.44 12.04 3.18 1.256 INT-21-600 2200 2200 13013 7311 63.33 139.63 13.24 3.50 1.256 INT-21-600 2400 2400 94 ½ 14193 7974 68.86 151.82 14.45 3.82 1.256 INT-21-600 2600 2600 15378 8639 74.45 164.14 15.65 4.13 1.256 INT-21-600 2800 2800 110 ¼'' 16562 9304 79.98 176.33 16.86 4.45 1.256 INT-21-600 3000 3000 17743 9968 85.53 188.57 18.06 4.77 1.256 INT-21-900 0400 400 15 ¾'' 3229 1814 19.13 42.17 3.55 0.94 1.336 INT-21-900 0500 500 4034 2266 23.27 51.29 4.44 1.17 1.336 INT-21-900 0600 600 4844 2721 27.41 60.42 5.32 1.41 1.336 INT-21-900 0700 700 27 ½'' 5649 3174 31.54 69.54 6.21 1.64 1.336 INT-21-900 0800 800 31 ½'' 6458 3628 35.68 78.66 7.10 1.87 1.336 INT-21-900 0900 900 7263 4080 39.88 87.92 7.98 2.11 1.336 INT-21-600 1000 1000 8073 4535 44.05 97.12 8.87 2.34 1.336 INT-21-600 1100 1100 43 ¼'' 8878 4988 48.19 106.23 9.76 2.58 1.336 INT-21-600 1200 1200 47 ¼ 9683 5440 52.32 115.36 10.64 2.81 1.336 INT-21-600 1300 1300 10492 5894 56.46 124.48 11.53 3.05 1.336 INT-21-600 1400 1400 11297 6347 60.66 133.73 12.42 3.28 1.336 900 INT-21-600 1500 1500 59 12107 6802 64.80 142.86 13.31 3.51 1.336 INT-21-600 1600 1600 63'' 12912 7254 68.94 151.98 14.19 3.75 1.336 INT-21-600 1700 1700 13721 7708 73.49 162.03 15.08 3.98 1.336 INT-21-600 1800 1800 14526 8161 77.63 171.15 15.97 4.22 1.336 INT-21-600 1900 1900 74 ¾'' 15336 8616 81.83 180.40 16.85 4.45 1.336 INT-21-600 2000 2000 78 ¾'' 16141 9068 86.00 189.60 17.74 4.69 1.336 INT-21-600 2200 2200 17755 9975 94.28 207.84 19.51 5.16 1.336 INT-21-600 2400 2400 94 ½ 19370 10882 102.55 226.09 21.29 5.62 1.336 INT-21-600 2600 2600 20984 11789 110.89 244.47 23.06 6.09 1.336 INT-21-600 2800 2800 110 ¼'' 22599 12696 119.16 262.71 24.84 6.56 1.336 INT-21-600 3000 3000 24214 13603 127.47 281.03 26.61 7.03 1.336 13

RADIATORS - TECHNICAL MANUAL Height Width Heat emissions @ AWT Weight Volume n mm inch mm inch 180 F 140 F kg lbs liter gallon exponent INT-22-300 0400 400 15 ¾'' 1540 865 8.06 17.77 1.38 0.36 1.234 INT-22-300 0500 500 1922 1080 9.68 21.33 1.72 0.45 1.234 INT-22-300 0600 600 2305 1295 11.29 24.90 2.06 0.55 1.234 INT-22-300 0700 700 27 ½'' 2692 1512 12.91 28.46 2.41 0.64 1.234 INT-22-300 0800 800 31 ½'' 3075 1728 14.52 32.02 2.75 0.73 1.234 INT-22-300 0900 900 3457 1942 16.24 35.81 3.10 0.82 1.234 INT-22-300 1000 1000 3844 2160 17.87 39.40 3.44 0.91 1.234 INT-22-300 1100 1100 43 ¼'' 4227 2375 19.48 42.96 3.78 1.00 1.234 INT-22-300 1200 1200 47 ¼ 4614 2592 21.10 46.52 4.13 1.09 1.234 INT-22-300 1300 1300 4997 2807 22.72 50.08 4.47 1.18 1.234 INT-22-300 1400 1400 5379 3022 24.43 53.87 4.82 1.27 1.234 300 11 ¾ INT-22-300 1500 1500 59 5766 3239 26.05 57.43 5.16 1.36 1.234 INT-22-300 1600 1600 63'' 6149 3454 27.67 60.99 5.50 1.45 1.234 INT-22-300 1700 1700 6536 3672 29.45 64.92 5.85 1.54 1.234 INT-22-300 1800 1800 6919 3887 31.06 68.48 6.19 1.64 1.234 INT-22-300 1900 1900 74 ¾'' 7302 4102 32.78 72.27 6.54 1.73 1.234 INT-22-300 2000 2000 78 ¾'' 7689 4320 34.41 75.85 6.88 1.82 1.234 INT-22-300 2200 2200 8454 4749 37.64 82.98 7.57 2.00 1.234 INT-22-300 2400 2400 94 ½ 9224 5182 40.87 90.11 8.26 2.18 1.234 INT-22-300 2600 2600 9993 5614 44.20 97.45 8.94 2.36 1.234 INT-22-300 2800 2800 110 ¼'' 10763 6047 47.44 104.58 9.63 2.54 1.234 INT-22-300 3000 3000 11533 6479 50.68 111.73 10.32 2.73 1.234 INT-22-400 0400 400 15 ¾'' 2009 1129 10.40 22.92 1.71 0.45 1.229 INT-22-400 0500 500 2511 1411 12.55 27.68 2.14 0.56 1.229 INT-22-400 0600 600 3014 1693 14.71 32.43 2.56 0.68 1.229 INT-22-400 0700 700 27 ½'' 3516 1975 16.87 37.18 2.99 0.79 1.229 INT-22-400 0800 800 31 ½'' 4018 2257 19.02 41.94 3.42 0.90 1.229 INT-22-400 0900 900 4520 2539 21.28 46.91 3.84 1.02 1.229 INT-22-300 1000 1000 5023 2822 23.45 51.70 4.27 1.13 1.229 INT-22-300 1100 1100 43 ¼'' 5525 3104 25.60 56.45 4.70 1.24 1.229 INT-22-300 1200 1200 47 ¼ 6027 3386 27.76 61.20 5.12 1.35 1.229 INT-22-300 1300 1300 6529 3668 29.92 65.95 5.55 1.47 1.229 INT-22-300 1400 1400 7032 3951 32.17 70.93 5.98 1.58 1.229 400 15 ¾ INT-22-300 1500 1500 59 7534 4233 34.33 75.68 6.41 1.69 1.229 INT-22-300 1600 1600 63'' 8036 4515 36.48 80.43 6.83 1.80 1.229 INT-22-300 1700 1700 8538 4797 38.84 85.62 7.26 1.92 1.229 INT-22-300 1800 1800 9041 5079 40.99 90.38 7.69 2.03 1.229 INT-22-300 1900 1900 74 ¾'' 9543 5361 43.25 95.35 8.11 2.14 1.229 INT-22-300 2000 2000 78 ¾'' 10045 5643 45.42 100.13 8.54 2.26 1.229 INT-22-300 2200 2200 11050 6208 49.73 109.64 9.39 2.48 1.229 INT-22-300 2400 2400 94 ½ 12054 6772 54.04 119.15 10.25 2.71 1.229 INT-22-300 2600 2600 13059 7337 58.46 128.87 11.10 2.93 1.229 INT-22-300 2800 2800 110 ¼'' 14063 7901 62.77 138.38 11.96 3.16 1.229 INT-22-300 3000 3000 15068 8465 67.10 147.92 12.81 3.38 1.229 INT-22-500 0400 400 15 ¾'' 2633 1479 12.79 28.20 2.08 0.55 1.304 INT-22-500 0500 500 3293 1850 15.49 34.16 2.60 0.69 1.304 INT-22-500 0600 600 3948 2218 18.20 40.12 3.12 0.82 1.304 INT-22-500 0700 700 27 ½'' 4607 2588 20.90 46.08 3.64 0.96 1.304 INT-22-500 0800 800 31 ½'' 5267 2959 23.60 52.04 4.16 1.10 1.304 INT-22-500 0900 900 5926 3329 26.41 58.22 4.68 1.24 1.304 INT-22-500 1000 1000 6581 3697 29.13 64.23 5.20 1.37 1.304 INT-22-500 1100 1100 43 ¼'' 7240 4067 31.83 70.18 5.72 1.51 1.304 INT-22-500 1200 1200 47 ¼ 7900 4438 34.54 76.14 6.24 1.65 1.304 INT-22-500 1300 1300 8555 4806 37.24 82.10 6.76 1.79 1.304 INT-22-500 1400 1400 9214 5176 40.04 88.28 7.28 1.92 1.304 500 INT-22-500 1500 1500 59 9874 5547 42.75 94.24 7.80 2.06 1.304 INT-22-500 1600 1600 63'' 10533 5917 45.45 100.20 8.32 2.20 1.304 INT-22-500 1700 1700 11188 6285 48.40 106.69 8.84 2.34 1.304 INT-22-500 1800 1800 11848 6656 51.10 112.65 9.36 2.47 1.304 INT-22-500 1900 1900 74 ¾'' 12507 7026 53.90 118.83 9.88 2.61 1.304 INT-22-500 2000 2000 78 ¾'' 13162 7394 56.62 124.83 10.40 2.75 1.304 INT-22-500 2200 2200 14481 8135 62.03 136.75 11.44 3.02 1.304 INT-22-500 2400 2400 94 ½ 15795 8874 67.44 148.67 12.48 3.30 1.304 INT-22-500 2600 2600 17114 9615 72.94 160.82 13.52 3.57 1.304 INT-22-500 2800 2800 110 ¼'' 18429 10353 78.35 172.74 14.56 3.85 1.304 INT-22-500 3000 3000 19747 11094 83.78 184.70 15.60 4.12 1.304 14

RADIATORS - TECHNICAL MANUAL Height Width Heat emissions @ AWT Weight Volume n mm inch mm inch 180 F 140 F kg lbs liter gallon exponent INT-22-600 0400 400 15 ¾'' 3192 1793 15.15 33.39 2.43 0.64 1.316 INT-22-600 0500 500 3989 2241 18.39 40.54 3.04 0.80 1.316 INT-22-600 0600 600 4786 2689 21.63 47.69 3.64 0.96 1.316 INT-22-600 0700 700 27 ½'' 5583 3137 24.88 54.84 4.25 1.12 1.316 INT-22-600 0800 800 31 ½'' 6380 3584 28.12 62.00 4.86 1.28 1.316 INT-22-600 0900 900 7177 4032 31.47 69.37 5.46 1.44 1.316 INT-22-600 1000 1000 7979 4483 34.73 76.58 6.07 1.60 1.316 INT-22-600 1100 1100 43 ¼'' 8776 4930 37.97 83.72 6.68 1.76 1.316 INT-22-600 1200 1200 47 ¼ 9573 5378 41.22 90.87 7.28 1.92 1.316 INT-22-600 1300 1300 10370 5826 44.46 98.02 7.89 2.08 1.316 INT-22-600 1400 1400 11167 6274 47.81 105.39 8.50 2.24 1.316 600 INT-22-600 1500 1500 59 11964 6721 51.05 112.55 9.11 2.41 1.316 INT-22-600 1600 1600 63'' 12761 7169 54.29 119.70 9.71 2.57 1.316 INT-22-600 1700 1700 13562 7619 57.82 127.48 10.32 2.73 1.316 INT-22-600 1800 1800 14359 8067 61.07 134.63 10.93 2.89 1.316 INT-22-600 1900 1900 74 ¾'' 15156 8515 64.41 142.01 11.53 3.05 1.316 INT-22-600 2000 2000 78 ¾'' 15953 8962 67.68 149.20 12.14 3.21 1.316 INT-22-600 2200 2200 17547 9858 74.17 163.51 13.35 3.53 1.316 INT-22-600 2400 2400 94 ½ 19146 10756 80.65 177.81 14.57 3.85 1.316 INT-22-600 2600 2600 20739 11651 87.24 192.34 15.78 4.17 1.316 INT-22-600 2800 2800 110 ¼'' 22333 12547 93.73 206.64 17.00 4.49 1.316 INT-22-600 3000 3000 23932 13445 100.24 220.99 18.21 4.81 1.316 INT-22-900 0400 400 15 ¾'' 3910 2197 22.28 49.13 3.57 0.94 1.270 INT-22-900 0500 500 4887 2746 27.16 59.88 4.46 1.18 1.270 INT-22-900 0600 600 5865 3295 32.03 70.62 5.35 1.41 1.270 INT-22-900 0700 700 27 ½'' 6842 3844 36.91 81.37 6.24 1.65 1.270 INT-22-900 0800 800 31 ½'' 7820 4393 41.78 92.11 7.14 1.89 1.270 INT-22-900 0900 900 8797 4942 46.76 103.08 8.03 2.12 1.270 INT-22-900 1000 1000 9770 5489 51.67 113.91 8.92 2.36 1.270 INT-22-900 1100 1100 43 ¼'' 10748 6038 56.54 124.64 9.81 2.59 1.270 INT-22-900 1200 1200 47 ¼ 11725 6587 61.41 135.39 10.70 2.83 1.270 INT-22-900 1300 1300 12703 7137 66.29 146.14 11.60 3.06 1.270 INT-22-900 1400 1400 13680 7685 71.26 157.10 12.49 3.30 1.270 900 INT-22-900 1500 1500 59 14658 8235 76.14 167.85 13.38 3.53 1.270 INT-22-900 1600 1600 63'' 15635 8784 81.01 178.60 14.27 3.77 1.270 INT-22-900 1700 1700 16613 9333 86.30 190.27 15.16 4.01 1.270 INT-22-900 1800 1800 17590 9882 91.18 201.01 16.06 4.24 1.270 INT-22-900 1900 1900 74 ¾'' 18568 10431 96.15 211.98 16.95 4.48 1.270 INT-22-900 2000 2000 78 ¾'' 19545 10980 101.06 222.80 17.84 4.71 1.270 INT-22-900 2200 2200 21500 12079 110.81 244.29 19.62 5.18 1.270 INT-22-900 2400 2400 94 ½ 23455 13177 120.56 265.78 21.41 5.66 1.270 INT-22-900 2600 2600 25410 14275 130.41 287.50 23.19 6.13 1.270 INT-22-900 2800 2800 110 ¼'' 27365 15374 140.16 308.99 24.98 6.60 1.270 INT-22-900 3000 3000 29315 16469 149.94 330.55 26.76 7.07 1.270 15

Height Width Heat emissions @ AWT Weight Volume n mm inch mm inch 180 F 140 F kg lbs liter gallon exponent INT-33-300 0400 400 15 ¾'' 2202 1237 11.82 26.07 2.04 0.54 1.262 INT-33-300 0500 500 2753 1547 14.24 31.38 2.55 0.67 1.262 INT-33-300 0600 600 3304 1856 16.65 36.70 3.06 0.81 1.262 INT-33-300 0700 700 27 ½'' 3854 2165 19.06 42.02 3.57 0.94 1.262 INT-33-300 0800 800 31 ½'' 4405 2475 21.47 47.33 4.08 1.08 1.262 INT-33-300 0900 900 4955 2784 24.04 53.00 4.59 1.21 1.262 INT-33-300 1000 1000 5501 3090 26.47 58.37 5.10 1.35 1.262 INT-33-300 1100 300 11 ¾ 1100 43 ¼'' 6052 3400 28.88 63.67 5.61 1.48 1.262 INT-33-300 1200 1200 47 ¼ 6603 3710 31.29 68.98 6.12 1.62 1.262 INT-33-300 1300 1300 7153 4019 33.70 74.30 6.63 1.75 1.262 INT-33-300 1400 1400 7704 4328 36.27 79.97 7.14 1.89 1.262 INT-33-300 1500 1500 59 8254 4637 38.68 85.28 7.65 2.02 1.262 INT-33-300 1600 1600 63'' 8805 4947 41.10 90.60 8.16 2.16 1.262 INT-33-300 1700 1700 9355 5256 43.67 96.28 8.67 2.29 1.262 INT-33-300 1800 1800 9906 5565 46.08 101.60 9.18 2.43 1.262 INT-33-400 0400 400 15 ¾'' 2790 1567 15.29 33.70 2.52 0.67 1.295 INT-33-400 0500 500 3485 1958 18.51 40.80 3.15 0.83 1.295 INT-33-400 0600 600 4183 2350 21.73 47.91 3.78 1.00 1.295 INT-33-400 0700 700 27 ½'' 4878 2740 24.95 55.01 4.41 1.16 1.295 INT-33-400 0800 800 31 ½'' 5576 3133 28.17 62.11 5.04 1.33 1.295 INT-33-400 0900 900 6275 3525 31.55 69.56 5.67 1.50 1.295 INT-33-400 1000 1000 6969 3915 34.80 76.72 6.30 1.66 1.295 INT-33-400 1100 400 15 ¾ 1100 43 ¼'' 7668 4308 38.01 83.81 6.93 1.83 1.295 INT-33-400 1200 1200 47 ¼ 8367 4701 41.24 90.91 7.56 2.00 1.295 INT-33-400 1300 1300 9061 5090 44.46 98.01 8.19 2.16 1.295 INT-33-400 1400 1400 9760 5483 47.84 105.46 8.82 2.33 1.295 INT-33-400 1500 1500 59 10458 5875 51.06 112.56 9.45 2.50 1.295 INT-33-400 1600 1600 63'' 11152 6265 54.28 119.66 10.08 2.66 1.295 INT-33-400 1700 1700 11851 6658 57.70 127.20 10.71 2.83 1.295 INT-33-400 1800 1800 12545 7048 60.92 134.30 11.34 3.00 1.295 INT-33-500 0400 400 15 ¾'' 3269 1837 18.78 41.41 3.07 0.81 1.207 INT-33-500 0500 500 4088 2297 22.82 50.31 3.84 1.01 1.207 INT-33-500 0600 600 4906 2756 26.86 59.21 4.61 1.22 1.207 INT-33-500 0700 700 27 ½'' 5725 3216 30.89 68.11 5.38 1.42 1.207 INT-33-500 0800 800 31 ½'' 6543 3676 34.93 77.01 6.14 1.62 1.207 INT-33-500 0900 900 7361 4135 39.13 86.26 6.91 1.83 1.207 INT-33-500 1000 1000 8175 4593 43.20 95.23 7.68 2.03 1.207 INT-33-500 1100 500 1100 43 ¼'' 8994 5053 47.23 104.11 8.45 2.23 1.207 INT-33-500 1200 1200 47 ¼ 9812 5512 51.26 113.01 9.22 2.43 1.207 INT-33-500 1300 1300 10631 5972 55.30 121.92 9.98 2.64 1.207 INT-33-500 1400 1400 11449 6432 59.49 131.16 10.75 2.84 1.207 INT-33-500 1500 1500 59 12268 6892 63.53 140.06 11.52 3.04 1.207 INT-33-500 1600 1600 63'' 13082 7349 67.57 148.96 12.29 3.25 1.207 INT-33-500 1700 1700 13900 7809 71.85 158.39 13.06 3.45 1.207 INT-33-500 1800 1800 14718 8269 75.88 167.29 13.82 3.65 1.207 INT-33-600 0400 400 15 ¾'' 4095 2301 22.27 49.09 3.59 0.95 1.318 INT-33-600 0500 500 5115 2874 27.11 59.77 4.49 1.18 1.318 INT-33-600 0600 600 6139 3449 31.96 70.46 5.38 1.42 1.318 INT-33-600 0700 700 27 ½'' 7162 4024 36.81 81.15 6.28 1.66 1.318 INT-33-600 0800 800 31 ½'' 8186 4599 41.65 91.83 7.18 1.90 1.318 INT-33-600 0900 900 9210 5174 46.66 102.87 8.07 2.13 1.318 INT-33-600 1000 1000 10234 5749 51.54 113.64 8.97 2.37 1.318 INT-33-600 1100 600 1100 43 ¼'' 11258 6325 56.38 124.31 9.87 2.61 1.318 INT-33-600 1200 1200 47 ¼ 12282 6900 61.23 134.99 10.76 2.84 1.318 INT-33-600 1300 1300 13301 7472 66.08 145.68 11.66 3.08 1.318 INT-33-600 1400 1400 14325 8048 71.08 156.71 12.56 3.32 1.318 INT-33-600 1500 1500 59 15349 8623 75.93 167.40 13.46 3.55 1.318 INT-33-600 1600 1600 63'' 16373 9198 80.78 178.09 14.35 3.79 1.318 INT-33-600 1700 1700 17396 9773 85.91 189.40 15.25 4.03 1.318 INT-33-600 1800 1800 18420 10348 90.76 200.09 16.15 4.27 1.318 INT-33-900 0400 400 15 ¾'' 5503 3092 32.75 72.19 5.27 1.39 1.324 INT-33-900 0500 500 6882 3866 40.03 88.26 6.59 1.74 1.324 INT-33-900 0600 600 8257 4639 47.32 104.32 7.90 2.09 1.324 INT-33-900 0700 700 27 ½'' 9631 5411 54.60 120.38 9.22 2.44 1.324 INT-33-900 0800 800 31 ½'' 11010 6185 61.89 136.44 10.54 2.78 1.324 INT-33-900 0900 900 12385 6958 69.33 152.86 11.85 3.13 1.324 INT-33-900 1000 1000 13760 7730 76.67 169.04 13.17 3.48 1.324 INT-33-900 1100 900 1100 43 ¼'' 15139 8505 83.95 185.09 14.49 3.83 1.324 INT-33-900 1200 1200 47 ¼ 16513 9277 91.24 201.15 15.80 4.17 1.324 INT-33-900 1300 1300 17888 10049 98.53 217.21 17.12 4.52 1.324 INT-33-900 1400 1400 19267 10824 105.97 233.62 18.44 4.87 1.324 INT-33-900 1500 1500 59 20642 11597 113.26 249.69 19.76 5.22 1.324 INT-33-900 1600 1600 63'' 22016 12369 120.54 265.75 21.07 5.57 1.324 INT-33-900 1700 1700 23396 13144 128.25 282.73 22.39 5.91 1.324 INT-33-900 1800 1800 24770 13916 135.53 298.80 23.71 6.26 1.324 16

ΔP (TDH) 10.0000 1.0000 11 21-22 33 0.1000 0.0100 0.0010 0.0001 0.01 0.02 0.04 0.06 0.08 0.1 0.2 0.4 0.6 0.8 1 2 3 Q(USGal/min) 17