Foxview Circle SANDY SPRING BUILDERS TECHNICAL GUIDE B CASEMENT WINDOWS

B3 Foxview Circle SANDY SPRING BUILDERS TECHNICAL GUIDE B CASEMENT WINDOWS

PRODUCT FEATURES SPECIFICATIONS STYLES GLAZING STANDARDS METAL CLADDING Traditional, Mission, French, Push Out models. Quarter Round, Full Radius and Camber Top options. STANDARD FEATURES Natural, clear Douglas Fir interior (no visible finger joints) (116 mm) jamb construction Low E insulated glazing with 1/2" (13 mm) airspace Roto gear operator and concealed sash locks Extruded aluminum cladding in a variety of standard colors, primed wood or clear fir exterior Flexible continuous weatherstrip system Insect screens with High Transparency mesh option handle, cover, and locks HARDWARE Multiple hardware type and finish choices are available. See the Hardware in section A for more information. Heat-Smart Double, Heat-Smart Triple, Tranquility and StormForce. StormForce is not available on all products. SIMULATED DIVIDED LITES (SDL) Ogee Profile 3/4" (19 mm), 1 1/8" (30 mm), 2" (51 mm) Putty Profile (16 mm), 7/8" (22 mm), 1 1/8" (30 mm), 2" (51 mm) Square Profile (interior only) 3/4" (19 mm), 7/8" (22 mm), 1 1/8" (30 mm), 2" (51 mm) CASING WOOD: 2" (51 mm) Brickmould, 3 1/2" (89 mm) Flat, 5 1/2" (139 mm) Flat, Adams and Williamsburg. METAL CLAD: 2" (51 mm) Brickmould, 3 1/2" (89 mm) Flat, 2" clad frame extension. Nose & Cove, Adams, Williamsburg and Contemporary. METAL CLAD COLOR SPECTRUM Standard and Architectural Palette colors, including anodized finishes. Available in Cyprium Collection (see section N). Most units have been tested by an independent laboratory for air and water infiltration, structural performance, and thermal performance requirements. FRAME & SASH Manufactured from Coastal Douglas Fir kiln-dried lumber with frame construction designed for (116 mm) jamb. All wood exterior components are factory primed unless specified as clear exterior. Minor scratches or abrasions in the wood surface or primer are not considered defects. ALTERNATE SPECIES The entire Loewen product line is also available in optional Mahogany or optional chain of custody certified Douglas Fir (SCS-COC-0051). PRESERVATIVE TREATED All wood parts are dipped in approved preservative. GLAZING With countless glazing configurations and Low E coating options, we ensure that you can choose the perfect blend of protection Heavy duty exterior metal cladding comprised of extruded aluminum is available in a variety of Standard and Architectural Palette colors, including anodized and Cyprium (copper and bronze cladding). Interior of window can be natural wood (unfinished) or primed. clad units are supplied ready-toinstall complete with integral metal nailing flange. HARDWARE Standard sash opens out to nearly 90 degrees for ease of cleaning. The roto gear operator will hold the sash at any position in its operating radius. The sash is supported by concealed heavy-duty hinges. All steel components are coated for superior corrosion protection. HARDWARE OPTION Operator and sash locks are standard in bronze, linen, sandstone or black. Optional finishes are available at an additional charge. DOUBLE WEATHERSTRIP The combination of a continuous, flexible foam weatherstrip and a flexible automotive type bulb weatherstrip ensures maximum energy efficiency and protection against air and water infiltration. and comfort. B2 HARDWARE STYLES Folding Crank Handle Push Out Handle Multipoint Lock Traditional Mission Mission French LEGEND: Standard Optional Push Out French (Camber Top) VARIABLES Function: Use for Egress 3 Available with Screen Concealed Hardware Durability: Low Maintenance 1 Clear Douglas Fir Finish Clear Mahogany Finish Traditional Mission Push Out French Push Out INSULATING GLASS Double or triple glass configurations with 1/2" (13 mm) airspace. HEAT-SMART SYSTEMS Heat-Smart best describes the benefits of the product that incorporates Low E coating and argon gas. Heat-Smart systems help reduce heating and cooling costs, providing superior energy efficiency. SIMULATED DIVIDED LITES (SDL) Standard SDL complete with airspace grilles, where available. Grille bars are permanently applied to the interior and exterior. Screens available in bronze, linen, sandstone, Tuscany brown, brushed aluminum or black aluminum frame, screened with anti-glare fiberglass cloth. -framed screens and High Transparency mesh available. Optional Retractable Screen and Swinging Screen available. Swinging Screen available on Push Out models only. EGRESS Consult local building codes for confirmation of size requirements for your area. Special egress hardware is available for windows, which enables some sizes to meet egress codes, eliminating the need to go to the next larger size window. Consult your Authorized Loewen Dealer for more details. B3 Primed Finish Cyprium Collection Performance: Heat-Smart Double FINISH OPTIONS: REFER TO SECTION A. 1 Various Standard and Architectural metal clad colors, including anodized finishes 2 Swinging as standard, retractable screen optional Heat-Smart Triple Tranquility StormForce Appearance: SDL Visit the Loewen Photo Gallery online at www.loewen.com for a large collection of Loewen product and elevation photography. Numerous custom window configuration opportunities exist please contact your Authorized Loewen Dealer. Specifications and technical information are subject to change without notice. Imperial and metric measurements are converted accurately. However, in some cases, industry standards cause a 1 mm variance. (Example: 3/4" is shown as 19 mm for all glass measurements.) CAD Download: www.loewen.com/architect Installation Instructions: www.loewen.com 3 Some size restrictions apply

L R CASEMENT 1 WIDE WINDOW SIZES OVERSIZED CASEMENT WINDOW (ROTO GEAR ONLY) 16 1/2 [9] 20 7/16 [519] 16 1/2 [9] 20 7/16 [519] 15 3/4 [400] 19 11/16 [500] [] 15 3/4 [400] 19 11/16 [500] [] [10] 9 3/4 [247] 13 11/16 [347] 7/16 R.O 9 3/4 [247] 13 11/16 [347] 7/16 [847] 35 1/4 [895] [1047] 25 1/16 [6] [] 17 3/8 [4] 0406 0506 0606 0706 7506 3/16 [7] * 1009 21 5/16 [5] 0407 0507 0607 0707 7507 0807 [8] * 1010 * 1110 30 15/16 [786] 23 5/16 [592] 0475 0575 0675 0775 7575 0875 11/16 [10] * 1011 * 1111 25 1/4 [6] 0408 0508 0608 S 0708 7508 0808 0908 11/16 [10] * 1012 * 1112 * 1212 11/16 [10] 3/16 [7] [8] 0409 00 01 0509 0510 0511 0609 0709 0610 0611 0710 0711 7509 7510 7511 0809 0810 0811 0909 0910 0911 3/4 7/8 [12] [13] [14] * 1014 * 1015 * 1016 * 1114 * 1115 * 1116 * 1214 * 1215 * 1216 B4 11/16 [10] 02 0512 0612 0712 7512 0912 * 1018 * 1118 * 1218 B5 3/4 7/8 [12] [13] [14] 76 7/16 [19] Size = + 15/16" (24 mm) 04 05 06 08 01 New oversized CA operator up to 1224 watch for sizes where tempering, triple sash stabilizer etc. are required roto gear only rectangular 0514 0515 0516 0518 0521 0614 0615 0616 0618 0621 0714 0715 0716 0718 0721 7514 7515 7516 7518 7521 0821 0914 0915 0916 0918 0921 95 7/8 [2436] 95 1/4 [29] 94 1/2 [2400] 76 7/16 [19] 88 1/4 [22] Size = + 15/16" (24 mm) *Only available with roto gear hardware * 04 * 0524 * 0624 * 0724 * 7524 * 0824 * 0924 * 1021 * 1024 * 1121 * 1124 * 1221 * 1224 Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. Meets US Egress Meets Canadian Egress Egress calculations are based on the unit being opened at 70 for washability hinge, 80 for egress hinge, and having minimum clear openings of: USA: 20" in width, 24" in height, with a total egress area of 5.7 Sq Ft CAN: 15" in width, 15" in height, with a total egress area of 3.8 Sq Ft Please check your local building codes for any variation in Egress Standards from those stated above. For egress information, contact your Authorized Loewen Dealer. Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order.

L R L F CASEMENT 2 WIDE WINDOW SIZES F FIXED CASEMENT WINDOW SIZES 3/4 16 1/2 [9] 20 7/16 [519] 15 3/4 [400] 19 11/16 [500] [] [10] 9 3/4 [247] 13 11/16 [347] 7/16 9 3/4 [247] 13 11/16 [347] 7/16 33 3/8 [847] 35 1/4 [895] 25 1/16 [6] [] 17 3/8 [4] 0806 1006 1206 1406 1506 13 1/4 [336] 12 9/16 [319] 11 13/16 [300] 5 9/16 [1] 0403 0503 0603 0703 7503 0803 0903 1003 1103 21 5/16 [5] 0807 1007 1207 1407 1507 1607 17 3/16 [436] 16 1/2 [9] 15 3/4 [400] 9 1/2 [2] 0404 0504 0604 0704 7504 0804 0904 1004 1104 30 15/16 [786] 23 5/16 [592] 0875 1075 1275 1475 1515 1675 21 1/8 [536] 20 7/16 [519] 19 11/16 [500] 13 7/16 [3] 0405 0505 0605 0705 7505 0805 0905 1005 1105 25 1/4 [6] 0808 1008 1208 1408 1508 1608 1808 25 1/16 [6] [] 17 3/8 [4] 0406 0506 0606 0706 7506 0806 0906 1006 1106 3/16 [7] 0809 1009 1209 1409 1509 1609 1809 21 5/16 [5] 0407 0507 0607 0707 7507 0807 0907 1007 1107 11/16 [10] [8] 0810 0811 1010 1011 1210 1211 10 11 1510 1511 1610 1611 1810 18 11 30 15/16 [786] 23 5/16 [592] 25 1/4 [6] 0475 0408 0575 0508 0675 0608 0775 0708 7575 7508 0875 0808 0975 0908 1075 1008 1175 1108 B6 11/16 3/4 [10] 7/8 [12] [13] [14] 76 7/16 [19] Size = + 15/16" (24 mm) 0821 1012 1014 1015 1016 1018 1021 1212 1214 1215 1216 1218 1221 12 14 15 16 18 11 1512 1514 1515 1516 1518 1521 1612 1614 1615 1616 1618 1621 1812 1814 1815 1816 1818 1821 11/16 11/16 3/4 [10] 3/16 [7] [8] [10] 7/8 [12] [13] [14] 76 7/16 [19] 0409 00 01 02 04 05 06 08 01 0509 0510 0511 0512 0514 0515 0516 0518 0521 0609 0610 0611 0612 0614 0615 0616 0618 0621 0709 0710 0711 0712 0714 0715 0716 0718 0721 7509 7510 7511 7512 7514 7515 7516 7518 7521 0809 0810 0811 0821 0909 0910 0911 0912 0914 0915 0916 0918 0921 1009 1010 1011 1012 1014 1015 1016 1018 1021 1109 1110 1111 1112 1114 1115 1116 1118 1121 B7 95 15/16 [2436] 95 1/4 [29] 94 1/2 [2400] 88 1/4 [22] Size = + 15/16" (24 mm) 04 0524 0624 0724 7524 0824 0924 1024 1124 Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. Meets US Egress Meets Canadian Egress SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. Egress calculations are based on the unit being opened at 70 for washability hinge, 80 for egress hinge, and having minimum clear openings of: USA: 20" in width, 24" in height, with a total egress area of 5.7 Sq Ft CAN: 15" in width, 15" in height, with a total egress area of 3.8 Sq Ft Please check your local building codes for any variation in Egress Standards from those stated above. For egress information, contact your Authorized Loewen Dealer. Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. For Masonry opening information see page A24-A. Information is subject to change without notice. CAD Download and nstallation Instructions: www.loewen.com

F FIXED CASEMENT WINDOW SIZES L LR R FRENCH CASEMENT WINDOW SIZES [219] 3/4 79 1/2 [2019] 95 1/4 [29] 1/8 [1044] 3/4 78 3/4 [2000] 94 1/2 [2400] 40 3/8 [1025] [10] [1047] 49 1/8 [1247] 53 1/16 [1347] 56 15/16 [1447] 64 13/16 [1647] 72 11/16 [1847] 76 5/8 [1947] 88 7/16 [2247] 10 5/16 [262] 14 1/4 [362] 14 3/4 [374] 15 3/8 [386] 18 3/16 [462] 22 1/8 [562] 24 1/8 [612] 26 1/16 [662] 30 [762] 13 1/4 [336] 12 9/16 [319] 11 13/16 [300] 5 9/16 [1] 1203 1403 1503 1603 1803 2003 2103 25 1/16 [6] [] 17 3/8 [4] 0806 1006 1106 1206 1406 17 3/16 [436] 16 1/2 [9] 15 3/4 [400] 9 1/2 [2] 1204 1404 1504 1604 1804 2004 2104 21 5/16 [5] 0807 1007 1107 1207 1407 1507 1607 21 1/8 [536] 20 7/16 [519] 19 11/16 [500] 13 7/16 [3] 1205 1405 1505 1605 1805 2005 2105 2405 25 1/4 [6] 0808 1008 * 1008 1108 1208 1408 1508 1608 1808 B8 25 1/16 [6] 30 15/16 [786] 11/16 11/16 3/4 [] [10] 17 3/8 [4] 21 5/16 [5] 23 5/16 [592] 25 1/4 [6] 3/16 [7] [8] [10] 7/8 [12] [13] [14] 76 7/16 [19] 1206 1207 1275 1208 1209 1210 1211 1212 1214 1215 1216 1218 1221 1406 1407 1475 1408 1409 10 11 12 14 15 16 18 11 1506 1507 1575 1508 1509 1510 1511 1512 1514 1515 1516 1518 1521 1606 1607 1675 1608 1609 1610 1611 1612 1614 1615 1616 1618 1621 1806 1807 1875 1808 1809 1810 1811 1812 1814 1815 1816 1818 1821 2006 2007 2075 2008 2009 2010 2011 2012 2014 2015 2016 2018 2106 2107 2175 2108 2109 2110 2111 2112 2114 2115 2116 2118 2406 2407 2475 2408 2409 20 21 22 24 25 26 11/16 11/16 3/4 [10] 3/16 [7] [8] [10] 7/8 [12] [13] [14] Size = + 15/16" (24 mm) * Only available with roto gear hardware Only available lwith Push Out hardware 0809 0810 0811 1009 1010 1011 1012 1014 1015 1016 1018 * 1009 * 1010 * 1011 * 1012 * 1014 * 1015 * 1016 * 1018 Minimum width roto gear 1109 1110 1111 1112 1114 1115 1116 1118 1209 1210 1111 1212 1214 1215 1216 1218 1409 10 1211 12 14 15 16 18 1509 1510 11 1512 1514 1515 1516 1518 1609 1610 1511 1612 1614 1615 1616 * 1618 1809 1810 1611 1812 1814 1815 1816 * 1818 B9 95 15/16 [2436] 95 1/4 [29] 94 1/2 [2400] 88 1/4 [22] 1224 14 1524 1624 Size = + 15/16" (24 mm) Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. Meets US Egress Meets Canadian Egress Egress calculations are based on the unit being opened at 70 for washability hinge, 80 for egress hinge, and having minimum clear openings of: USA: 20" in width, 24" in height, with a total egress area of 5.7 sq ft CAN: 15" in width, 15" in height, with a total egress area of 3.8 sq ft Please check your local building codes for any variation in Egress Standards from those stated above. For egress information, contact your Authorized Loewen Dealer.

CAMBER TOP CASEMENT STANDARD RADIUS ELEVATIONS L F CAMBER TOP CASEMENT 1 WIDE WINDOW SIZES IMPERIAL 18 11/16 R 15 3/8 R 98 7/16 11 R 118 1/8 16 1/2 [9] 20 7/16 [519] 78 3/4 106 5/16 15 3/4 [400] 19 11/16 [500] [] R R 98 7/16 R 118 1/8 9 3/4 [247] 13 11/16 [347] 7/16 15 11/16 14 1/2 10 21 3/16 [538] 0407 0507 0607 0707 7507 0807 110 1/4 30 15/16 [786] [588] 0475 0575 0675 0775 7575 0875 R R 118 1/8 R 137 13/16 25 1/8 [8] 0408 0508 0608 0708 7508 0808 14 1/2 13 3/4 94 1/2 10 5/16 118 1/8 1/16 [738] 0409 0509 0609 0709 7509 0809 0909 33 [838] 00 0510 0610 0710 7510 0810 0910 11 13/16 R 11 15/16 102 3/8 R 118 1/8 8 3/8 126 R 137 13/16 11/16 11/16 [10] 34 7/8 [886] 40 7/8 [1038] 01 02 0511 0512 0611 0612 0711 0712 7511 7512 0811 0911 0912 B10 3/4 [1238] 04 0514 0614 0714 7514 0914 B11 METRIC 475 399 369 1200 1500 1 R 1500 R 1500 R 1500 391 350 369 2000 2100 2400 R 2500 R 2500 R 3000 279 253 262 2700 2800 3000 R 3000 R 3000 R 3500 3/4 52 11/16 [1338] 56 5/8 [1438] 64 1/2 [18] 76 5/16 [1938] Size = + 15/16" (24 mm) CTC 05 06 08 01 0515 0516 0518 0521 0615 0616 0618 0621 0715 0716 0718 0721 7515 7516 7518 7521 0821 0915 0916 0918 0921 300 R 1500 304 R 3000 213 R 3500 STANDARD SIZES SHOWN. ADDITIONAL SIZES AND RADII MAY BE AVAILABLE. CUSTOM SIZES CAN BE ORDERED. 1800 Note: Custom shapes available. Custom size and radii available. 2 3200 Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. " (800mm) radius.

L R L F CAMBER TOP CASEMENT 2 WIDE WINDOW SIZES L F HALF ROUND CASEMENT WINDOW SIZES 3/4 [] 9 3/4 [247] 13 11/16 [347] 7/16 7/16 21 3/16 [538] 0807 1007 1207 1407 1475 1408 [8] 0610 0710 30 15/16 [786] [588] 0875 1075 1275 1475 1575 1508 11/16 [10] 0611 0711 25 1/8 [8] 0808 1008 1208 1408 1508 1608 11/16 [10] 0612 0712 7512 1/16 [738] 0809 1009 1209 1409 1509 1609 1809 7/8 [12] 0614 0714 7514 0914 33 [838] 0810 1010 1210 10 1510 1610 1810 [13] 0615 0715 7515 0915 11/16 [10] 34 7/8 [886] 0811 1011 1211 11 1511 1611 1811 3/4 [14] 0616 0716 7516 0916 11/16 40 7/8 [1038] 1012 1212 12 1512 1612 1812 0618 0718 7518 0918 B12 3/4 [1238] 1014 1214 14 1514 1614 1814 76 7/16 [19] 0621 0721 7521 0821 0921 B13 3/4 52 11/16 [1338] 56 5/8 [1438] 64 1/2 [18] 76 5/16 [1938] Size = + 15/16" (24 mm) 0821 1015 1016 1018 1021 1215 1216 1218 1221 15 16 18 11 1515 1516 1518 1521 1615 1616 1618 1621 1815 1816 1818 1821 Size = + 15/16" (24 mm) Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. " (1500 mm) radius. Note: Available with Mission sash. For a unit with a Mission sash, subtract 13/16" (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware.

CASEMENT WINDOW WALL CONNECTION CASEMENT WINDOW 1 3/16" [31] 1 7/16" [37] ROUGH OPENING ROUGH OPENING METAL CLAD DOUBLE (116 mm) WOOD EXTERIOR TRIPLE B14 ROUGH OPENING FRAME B15 METAL CLAD DOUBLE (116 mm) ROUGH OPENING FRAME 1 7/16" [37] 1 7/16" [37] WOOD EXTERIOR TRIPLE

PUSH OUT CASEMENT WINDOW FIXED CASEMENT WINDOW 1 3/16" [31] 1 15/16" [50] 1 7/16" [37] 1 5/16" [34] 1 13/16" [45] 2 1/2" [64] 1 15/16" [50] ROTO GEAR SASH MOULDING OPTIONS GLAZING STOP PROFILES 1 11/16" [43] METAL CLAD TRIPLE PUTTY GLAZING STOPS HINGED WOOD WOOD EXTERIOR DOUBLE (116 mm) 2" BRICKMOULD WITH STANDARD SILL NOSING HINGED WOOD 1 1/2" [39] WOOD EXTERIOR TRIPLE ADAMS CASING WITH BC SUBSILL SQUARE GLAZING STOPS RETRACTABLE PUSHOUT - SASH MOULDING OPTIONS METAL CLAD DOUBLE WITH SILL COVER TO MATCH OPERATING EXPOSED LOCKING HARDWARE WOOD EXTERIOR - SASH MOULDING OPTIONS ARE THE SAME AS METAL CLAD B16 6" [153] B17 VISIBLE GLASS 1 3/4" [44] 1 11/16" [43] 1 11/16" [43] DOUBLE RETRACTABLE DOUBLE 15/16" [24] 5/16" [8] METAL CLAD 6" [153] TRIPLE HINGED WOOD TRIPLE METAL CLAD DOUBLE (116 mm) ADAMS CASING WITH BC SILL NOSE RETRACTABLE HINGED WOOD 5/16" [8] 15/16" [24] RETRACTABLE WOOD EXTERIOR

MISSION CASEMENT WINDOW FRENCH CASEMENT WINDOW 1 3/16" [31] 1 7/16" [37] 1 5/16" [34] 1 9/16" [40] 2 1/2" [64] 1 15/16" [50] GLAZING STOP PROFILES 4" [102] 4" [102] 4" [102] METAL CLAD TRIPLE STANDARD WOOD EXTERIOR DOUBLE (116 mm) 2" BRICKMOULD WITH STANDARD SUBSILL RETRACTABLE WOOD EXTERIOR TRIPLE WILLIAMSBURG CASING WITH HERITAGE SUBSILL STANDARD B18 6" [153] CASING B19 2" VISIBLE GLASS [51] 4" [102] 2 1/2" [64] DOUBLE RETRACTABLE DOUBLE 15/16" [24] METAL CLAD 6" [153] 15/16" [24] TRIPLE RETRACTABLE TRIPLE 1 13/16" [45] STANDARD STANDARD METAL CLAD DOUBLE (116 mm) WILLIAMSBURG CASING WITH HERITAGE SILL NOSE RETRACTABLE 3/4" [19] 3/4" [19] WOOD EXTERIOR SEE SECTION A.

PUSH OUT FRENCH CASEMENT WINDOW RADIUS TOP CASEMENT WINDOW GLAZING STOP PROFILES 1 3/16" [31] [53] 1 7/16" [37] 1 5/16" [34] 2 7/8" [73] 1 15/16" [50] 1 11/16" [43] 1 1/2" [39] METAL CLAD TRIPLE STANDARD WOOD EXTERIOR DOUBLE (116 mm) 2" BRICKMOULD WITH STANDARD SUBSILL STANDARD WOOD EXTERIOR TRIPLE 3 1/2" FLAT CASING WITH BC SUBSILL STANDARD B20 CASING 6" [153] B21 1 3/16" [31] VISIBLE GLASS 1 11/16" [43] DOUBLE STANDARD DOUBLE 3/4" [19] METAL CLAD 6" [153] 3/4" [19] TRIPLE STANDARD TRIPLE SEE SECTION A. METAL CLAD DOUBLE (116 mm) STANDARD STANDARD 3/4" [19] 3/4" [19] STANDARD WOOD EXTERIOR RADIUS COMPONENT

PICTURE AND FIXED CASEMENT WINDOW TRANSOMS OVERSIZED CASEMENT WINDOW (ROTO GEAR ONLY) GLAZING STOP PROFILES CASING B22 B23 SEE SECTION A.

B24 York Mills AB8 GROUP