quantumdata TM 980 18G Video Generator Module for HDMI Testing Functional and Compliance Testing up to 600MHz Important Note: The name and description for this module has been changed from: 980 HDMI 2.0 Video to: 980 18G Video for HDMI Testing. Key Features Run functional tests on HDMI 2.0 sinks up to 600 MHz with standard format library consisting of 600 standard timings and over 300 test patterns Run approved HDMI 2.0 sink Compliance tests up to 6G Verify UHD displays with the approved UHD Alliance compliance test patterns and procedures NEW! Verify HDR end-to-end in post production and HDR attributes on HDR displays with HDR Lab option Verify Dolby Vision and Hybrid Log Gamma HDR solutions with special test patterns View EDID and SCDC registers of connected sink to verify contents Run audio tests using LPCM audio tones or compressed Dolby and DTS tones Monitor HDCP, SCDC, EDID and CEC transactions and messages over the DDC channel using the Auxiliary Channel Analyzer feature Enable/disable and configure parameter values for InfoFrames and data island transmitted The Teledyne LeCroy quantumdata 980 18G Video for HDMI Testing is equipped with an HDMI Tx port operating up to 600 MHz for testing Ultra HD TVs and sink devices. The HDMI Tx video generator port provides functional testing of HDMI video, audio, protocol, and auxiliary data. The module supports approved HDMI 2.0 compliance testing of Ultra HD HDMI sink devices as well as UHD Alliance compliance tests. Video Generation The 980 18G Video supports video and audio functional testing at TMDS character rates up to 600 MHz for testing Ultra HDTVs with 4K x 2K resolutions at 50/60Hz. The 980 HDMI 2.0 Video Generator module supports HDMI 2.0 and UHD Alliance approved compliance tests for next generation UHD TVs and other sinks. Operation The 980 18G Video Generator module can be controlled through the 980 Manager GUI graphical user interface. You can use either the embedded 980 GUI Manager via the touch screen monitor or you can use the external 980 GUI Manager from a PC. The 980 18G Video Generator module can be equipped in the either the 980B or 980R Advanced Test Platform.
VIDEO PATTERN TESTING FOR UHD TVS Video Testing The 980 18G Video supports video and audio functional testing at TMDS character rates up to 600 MHz for testing Ultra HDTVs with 4K x 2K resolutions at 50/60Hz. The 980 HDMI 2.0 Video has an extensive set of video formats and library of test patterns. You can set any pattern in motion to test motion artifacts with the Image Shift feature. Format Selection 980 with HDMI 2.0 Video Test Pattern Selection Test Setup for Sink Test Audio Testing The module offers a programmable LPCM audio sine wave generator enabling you to set the amplitude, frequency, sampling rate and bit depth for uncompressed formats. The module also offers a set of compressed audio clips including Dolby AC-3 and DTS ES. LPCM Audio Testing Audio Compressed Tones
PROTOCOL TEST FEATURES Protocol Testing The 980 18G Video offers a variety of features for testing HDMI protocols. The EDID Decode feature enables you to examine the contents of the EDID of the connected HDMI 2.0 sink or display in human readable text. You can capture EDIDs from connected displays for testing. You can also compare an EDID on a connected display with a stored EDID. The SCDC Decode feature enables you to view the current register settings of the SCDC and configure registers where allowed. The HDCP verification utility enables you to verify a sink s response to HDCP 1.4 or HDCP 2.2 authentication. EDID Decode View 980 with HDMI 2.0 Video SCDC Register View Test Setup for Sink Test Aux Channel Analyzer You can use the 980 18G Video s Auxiliary Channel Analyzer (ACA) function to monitor the HDCP authentication transactions (including HDCP 2.2) and SCDC, EDID exchanges occurring over the HDMI DDC channel. You can also monitor CEC messages over the CEC bus. The optional ACA feature enables you to filter events and search through the logs. You can save the logs for further analysis and dissemination to other subject matter experts. Aux Channel Analyzer HDCP 2.2 Test
HDMI & UHD ALLIANCE COMPLIANCE TEST FEATURES HDMI 2.0 Compliance Testing The 980 18G Video supports various approved HDMI 2.0 sink compliance tests (MOIs). The compliance tests enable you to view the detailed test results which help pinpoint the cause of compliance test failures. You can save the results and disseminate them to subject matter experts for analysis. Pre-Testing and Self-Testing The 980 18G Video is ideal for pre-testing or self testing (where permitted) your HDMI display or sink product. Pre-testing helps ensure successfully passing compliance when submitted to the Authorized Test Center (ATC). Self testing (where permitted) for compliance offers greater benefits for time to market and cost reduction than pre-testing by avoiding submission to the ATC for approval. Sample HDMI 2.0 Sink Compliance Test Selection Sample HDMI 2.0 Sink Compliance Results 6G 980 with 18G Protocol for HDMI Testing Setup for HDMI Sink Compliance Test HDMI UHD Alliance Compliance Testing The 980 18G Video supports the UHD Alliance Sink compliance tests. You can run the approved compliance tests in your lab to ensure compliance and interoperability with next gen UHD TVs. Sample HDMI 2.0 Sink Compliance Results - HDR
HDR FUNCTIONAL TESTING HDR LAB, DOLBY VISION, HLG HDR Lab The HDR Lab test option was developed jointly with industry experts Joe Kane and Florian Friedrich. HDR Lab is a suite of test patterns and reference images (examples at right) that address the following: HDR Lab (Sample Test Pattern - Combination) HDR End-to-End Validation in Post Production Verifies HDR metadata, color grading and color decoding throughout the post production process. HDR Display Test Suite Verifies various HDR attributes such as: peak brightness, native contrast, average brightness level, signal clipping, and color gamut on an HDR-capable UHD TV using a variety of test patterns. HDR Lab (Sample Test Pattern - Clipping) 980 with 18G Protocol for HDMI Testing Setup for HDR Functional Tests Dolby Vision and Hybrid Log Gamma Test Patterns The Dolby Vision test image verifies a Dolby Vision display s Dolby Vision-specific EDID data, its response to the Dolby Vision protocol handshake and its handling of the Dolby Vision signal and metadata. The Dolby Vision test image will be rendered with a checkmark in the proper location if the display has properly interpreted the color space, metadata and checksum correctly. The Hybrid Log Gamma (HLG) test image provides an assurance that the HLG metadata is not impeding the ability of the display to render the image. HLG Test Image HDR Lab (Sample Test Pattern Flower Montage) Dolby Vision Test Image Dolby Vision Test Image
SPECIFICATIONS HDMI Tx Port Version HDMI 2.0a Standard Formats VESA, CEA Connector Type A Tx Protocol HDMI, DVI Video Colorimetry ITU-R BT.601-5, ITU-R BT.709-5, ITU-R BT.2020 Video Max Pixel Rate 600MHz (6.00 Gbps/channel TMDS rate) Color Depths 8, 10, 12 bits Video Encoding RGB, YCbCr Video Sampling Modes 4:4:4, 4:2:2, 4:2:0 HDCP Versions 1.4 & 2.2 Compliance Test Support HDMI 2.0 Sink Compliance Various tests in Sections: 8.2 TMDS Protocol; 8.3 Pixel Decoding; 8.4 Video Timing; 8.5 Audio; 8.7 HDMI-VSIF; 8.8.9 HDMI-HDR EDID; 9.7 Repeater Input HDR UHD Alliance Sink Compliance Tests 4.2, 4.3, 4.4, 4.5, 4.6, 4.7 & 4.8 Options HDMI Aux Channel Analyzer Compliance Test Packages HDR Lab Test Pattern Suite Dolby Vision Test Pattern 980 Test Platforms Embedded Display Power Weight Size Command Line Control Environmental Monitor HDMI DDC transactions and CEC message in real time See list in table above Suite of test patterns and reference image for testing HDR Special test pattern to test Dolby Vision Tunnel Mode 980B: 15 diagonal; Resolution: 1024(H); x 768 (V) resolution; 24 bit RGB color. 980R: 7 diagonal: Resolution: 800 (H) x 480 (V); 24 bit RGB color. 90-264 VAC, 47-63Hz 23.76 LBS; 10.78 Kg 980B: Height: 15.25 in. (38.7 cm) Width: 14.57 in. (36.5 cm) Depth: 6.29 in. (15.9 cm) 980R: Height: 6.29 in. (15.9 cm); Width: 15.25 in. (38.7 cm); Depth: 14.57 in. (36.5 cm) Ethernet (RJ-45) for external GUI and telnet Operating Temp: 32 to 104 (F); 0 to 40 (C) 1-800-909-7211 teledynelecroy.com Local sales offices are located throughout the world. Visit our website to find the most convenient location. 2018 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders. v0128