0D (Pneumatic) Electronic pressure switch -... 0 bar, -... bar, 0... 6 bar, 0... 0 bar, 0... bar Fast error detection viamulti-colour display Easy to use pressure switch with clear display and intuitive programming Flexible mounting - DIN Rail or wall mounting Optional connection; rear or base LABS free materials, conforming to RoHS Pressure switches are ATEX conforming to Zone, gases (II G Ex na IIC T6 Gc X). When installing special conditions must be observed. Protection to EN 609: IP (with plug mounted) ATEX Technical data Medium: Compressed air, filtertered (0 µm), lubricated and non-lubricated Mounting: Optional Pressure ranges: -... 0 bar, -... bar 0... 6 bar, 0... 0 bar, 0... bar Over pressure safety: 6 bar (-... 0; -... bar) bar (0... 6; 0... 0 bar) 6 bar (0... bar) Temperature: Fluid/Ambient 0... + 60 C ATEX: 0... +0 C Air supply must be dry enough to avoid ice formation at temperatures below + C Accuracy: % FS* [incl. temperature drift],% (+0... 0 C) Repeatability: 0,% FS* Switching point/reset point: Adjustable up 0... 00% FS* Display: Pressure units bar, PSI, KPa, MPa, InHg Vacuum Linearity analogue port: 0,% FS* Degree of protection acc. to EN 609: IP (with plug mounted) Shockproof: 0 g, xyz, DIN EN 60068--7 ( ms) Vibrationproof: g, 0... 0 Hz, xyz, DIN EN 60068--6 Weight: 0,0 kg Materials: Housing and display: PC-GF0 Seals: FKM Connector (M x ): nickel plated brass * full scale Electrical parameters Electrical connection: M x Power supply: UB = V d.c. (7... 0 V d.c.) Current consumption: 0 ma, without outputs Analogue power output (per switch selectable): 0-0 V: IL max. ma - 0 ma: RL 600 Ω Switch output: PNP high: UB -, V low: 0 V NPN high: 0 V low: I(RL) x 0, Ω Switching current: Imax 00 ma (short-circuit proof) Switching time: ms Electromagnetic compatibility: Emission to EN 6000-6-:007 Immunity to EN 6000-6-:00 / N/en..9.0
0D (Pneumatic) Standard variants Pressure switch The electrical connectors are not included. Caution: When used in Ex application areas the following connectors should be used 008, 00, 007 and 00 only, otherwise the device will lose its Ex certification. Pressure range Output signal Model 0... 6 bar G/ x PNP DS-EP06FBPR00 x NPN DS-EP06FBNR00 x PNP + x analog DS-EP06FBPAR00 x NPN + x analog DS-EP06FBNAR00 Push-In fitting ø mm x PNP DS-EP06PBPR00 x NPN DS-EP06PBNR00 x PNP + x analog DS-EP06PBPAR00 x NPN + x analog DS-EP06PBNAR00 0...0 bar G/ x PNP DS-EP0FBPR00 x NPN DS-EP0FBNR00 x PNP + x analog DS-EP0FBPAR00 x NPN + x analog DS-EP0FBNAR00 Vacuum switch Pressure range Output signal Model -... 0 bar G/ x PNP DS-EV0FBPR00 x NPN DS-EV0FBNR00 x PNP + x analog DS-EV0FBPAR00 x PNP DS-EV0PBPR00 Push-In fitting ø mm x NPN DS-EV0PBNR00 x PNP + x analog DS-EV0PBPAR00 -... bar G/ x PNP DS-EVFBPR00 x NPN DS-EVFBNR00 Push-In fitting ø mm x PNP DS-EVPBPR00 x NPN DS-EVPBNR00 Push-In fitting ø mm x PNP DS-EP0PBPR00 x NPN DS-EP0PBNR00 x PNP + x analog DS-EP0PBPAR00 x NPN + x analog DS-EP0PBNAR00 0... bar G/ x PNP DS-EPFBPR00 x PNP + x analog DS-EPFBPAR00 Push-In fitting ø mm x PNP DS-EPPBPR00 x PNP + x analog DS-EPPBPAR00 Options selector Pressure range (bar) - bis 0 V0 - bis V 0 bis 6 P06 0 bis 0 P0 0 bis P G/ F Ø mm Push-In fittings P DS-E B R00 Output signa x PNP P x NPN N PNP + analogue PA NPN + analogue NA For combinations of pressure switch variants consult our Technical Service. This options selector explains only the pressure switch variants. Additional variants/options are not possible. Ordering information Electronic pressure switch, pressure range 0 to 6 bar, port size G /, output signal x PNP Quote: DS-EP06FBPR00 N/en..9.0 /
0D (Pneumatic) Accessories Wall clip Front frame Front frame with keyboard cover DIN rail ( x 7,) Adaptor NPT Adaptor 096 008 006 V0009-C00 ( m) 09 (G/... G/) 09 (G/... / NPTF) 090 (G/... G/8) 09 (G/... /8 NPTF) Connector M x 90 90 (without Ex) straight Connector M x straight (without Ex) 008 ( m cable length, -core) 006 (without cable) 007 ( m cable length, -core) 00 (without cable) 00 ( m cable length, -core) 00 ( m cable length, -core) X PNP X NPN x PNP, x analogue x NPN, x analogue + V + V + V + V Out Out R L RL R L R L Out Out Out * Out R L R L R L RL Out * Out Electrical connection M x Electrical connection M x PIN-No. Signal Cable +UB V DC brown Out (PNP; NPN; white analogue -0 ma/0-0 V) 0 V blue Out (PNP; NPN) black Analoge output signals reprogrammable / N/en..9.0
0D (Pneumatic) Basic dimensions 9 0 M x G / 0 M x 67,,, 0, 0 6 6, 0, 6 8 8 Integrated PNEUFIT push-in fitting Wall clip for DIN panel DIN EN 607 ( x 7,; x ) Maximum torque for plug:,0 Nm ± 0, Do not use connection nipples with conical threading! Only use connection nipples with axial sealing on the outer flange with a maximum screw-in depth of 9 mm with maximum torque of,0 Nm ± 0,. N/en..9.0 /
0D (Pneumatic) Accessories Wall clip Material: plastic,8,, 9 8,8 Bolts conforming to DIN EN ISO76 (M x 0) included in scope of supply Front frame for panel mounting Panel hole Panel thickness:, to mm 6 9,+0, 6, 9, 6,6,8 9,+0, Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical features. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. / N/en..9.0