Model Input Voltage Range Input Control 8-48 V 1 2 Vin - 0.2~0.5V 5 240 97% 2 8-48 V 2 2 Vin - 0.2~0.5V 5 240 97% 7-201705
Voltage Range Please refer model table Input Current 5.1A max (per channel) Control Voltage 0/1-10VDC Dimmer * wires should have the capability to sink a min. of 10mA for multiple 2mA is recommended for a single module Control Range 0-100%v 1V = 0% light output 10V =100% light output Short Circuit Protection Hiccup-Mode, Auto-Recovery upon removal of short circuit condition. Over Voltage Auto Recovery upon input voltage under Vin (max) Over Temperature Protection Auto recovery upon operating temperature <105 C Under voltage ogout Auto Recovery upon input voltage over Vin (min) Output Frequency 1kHz PWM Output Current 5A max. at full load ** 97% Typ Dimming Ratio 1:1000 ** - SD-DIM dimming module max. output current is dependent on ED driver output current, which should not exceed the Class 2 maximum of 5A or. Ambient Temperature Storage Temp Relative Humidity - 20 C - 60 C (Full oad) - 40 C - 85 C 5% - 95 % Compliance / Safety Safety Standards: U8750,U879, Weatherability: IP 65 Power Unit Dimensions Case Design/Material Wire ength Wire Size mm () x 44mm (W) x 14.5mm (H) 6 inches 152.4mm a. 18AWG standard, 300V, 105deg C (DC input and Dim Output wires) b.22awg standard, 300V, 105deg C(0/1-10V control wires) IPUT OUTPUT (Standard) COTRO IPUT SD_D _201705
Performance Curve 120 Derating Curve 100 Dimming Curve 100 oad (%) 80 60 40 20 Dimming evel (%) Warm Cool 0-20 -10 0 10 20 30 40 50 60 Operating Temperature ( C) 0 Input (V) 10 100 Dimming Curve 2 Color Temperature (0/1-10V Control 1) 2 (0/1-10V Control 2) 100 Dimming evel (%) Intensity Dimming evel (%) Warm Cool 0 Input1 (V) 10 0 Input2 (V) 10 _201705
Mechanical Diagram Black () Red () Yellow (Warm +) Blue (Warm -) Blue (Cool -) Yellow (Cool +) Red (Vin2 +) Black (Vin2 -) Input Wire Black Vin1 - Red Red Vin2 - Output Wire Yellow Warm + Yellow Cool + Blue Warm - Blue Cool - Control Wire Purple to 0/1-10V Control Gray to 0/1-10V Control Packing Information 0.096 kg/pcs, 100pcs/carton; 11.6 kg /carton; 270xW220xH430 (mm) SD_D _201705
Mechanical Diagram 2 Black (Vin 1 -) Red (Vin 1 +) Yellow (Warm +) Blue (Warm -) Blue (Cool +) Yellow (Cool +) Red (Vin 2 +) Black (Vin 2 -) 22#AWG Gray (Control 1) 22#AWG Purple (Control 1) 22#AWG Purple (Control 2) 22#AWG Gray (Control 2) Input Wire Black Vin1 - Red Red Vin2 - Packing Information 0.10 kg/pcs ; 100pcs/carton; 12.0 kg /carton; 270xW220xH430 (mm) Output Wire Yellow Warm + Yellow Cool + Blue Warm - Blue Cool - Control Wire Purple to 0/1-10V Control 1 Gray to 0/1-10V Control 1 Purple to 0/1-10V Control 2 Gray to 0/1-10V Control 2 SD_D _201705
Wiring Diagrams Warm white SD/XD/GV Series Class 2 ED Drivers ( Dual channel or two separate drivers 48V, 5A per Channel ) ( 48V, 5A max ) (Dual channel or two separate drivers) Cool Daylight Purple + Gray - Connection Method 1 from evitron, utron, Hunt, etc. SD/XD/GV Series Class 2 ED Drivers ( 48V, 5A per Channel ) ( 48V, 5A max ) ED+ WW- CW- Tunable white ED Purple + Gray - Connection Method 2 from evitron, utron, Hunt, etc. _201705
Wiring Diagrams SD/XD/GV Series Class 2 ED Drivers ( 48V, 5A per Channel ) ( 48V, 5A max ) ED+ WW- CW- Tunable white ED Purple + Gray - Connection Method 3 from evitron, utron, Hunt, etc. 2 Warm white SD/XD/GV Series Class 2 ED Drivers ( Dual channel or two separate drivers 48V, 5A per Channel ) ( 48V, 5A max ) (Dual channel or two separate drivers) 2 Cool Daylight Purple 1 + Gray 1 - Purple 2 + Gray 2 - from evitron, utron, Hunt, etc. Connection Method 1 Control 1 for intensity Control 2 for color temperature SD-DIM-TW_201705
Wiring Diagrams SD/XD/GV Series Class 2 ED Drivers ( 48V, 5A per Channel ) ( 48V, 5A max ) ED+ WW- 2 CW- Tunable white ED Purple 1 + Gray 1 - Purple 2 + Gray 2 - from evitron, utron, Hunt, etc. Connection Method 2 Control 1 for intensity Control 2 for color temperature SD/XD/GV Series Class 2 ED Drivers ( 48V, 5A per Channel ) ( 48V, 5A max ) ED+ WW- 2 CW- Tunable white ED Purple 1 + Gray 1 - Purple 2 + Gray 2 - from evitron, utron, Hunt, etc. Connection Method 3 Control 1 for intensity Control 2 for color temperature Information furnished is believed to be accurate and reliable. However, GRE Alpha assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. o license is granted by without notice. This publication supersedes and replaces all information previously supplied. The GRE Alpha logo is a registered trademark of GRE Alpha Electronics td. All other names are the property of their respective owners SD_D _201705