Mini Gateway USB for ModFLEX Wireless Networks

Similar documents
C-MAX. CMM-9301-V3.1S Bluetooth 4.0 Single Mode HCI Module. Description. 1.1 Features

EVM Data Guide. (Preliminary)

ATA8520D Production and EOL Testing. Features. Description ATAN0136 APPLICATION NOTE

STEVAL-ICB004V1. Advanced resistive touchscreen controller demonstration board based on the STMPE811. Features. Description

PD18-73/PD18-73LF: GHz Two-Way 0 Power Splitter/Combiner

SKY LF: GHz Ultra Low-Noise Amplifier

OEM Version. 1.0 INTRODUCTION Retail Version: Includes reader, USB cable and five peel & stick RFID tags

Obsolete Product(s) - Obsolete Product(s)

AT18F Series Configurators. Application Note. Stand-alone or In-System Programming Applications for AT18F Series Configurators. 1.

DVI Rover 700 User Guide

Input / Output to module

AW900mT. User s Manual. Point-to-multipoint. Industrial-grade, ultra-long-range 900 MHz non-line-of-sight wireless Ethernet systems

VGA to DVI Extender over Fiber SET

SKY : MHz High Linearity, Single Up/Downconversion Mixer

SKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier

STEVAL-CCM003V1. Graphic panel with ZigBee features based on the STM32 and SPZBE260 module. Features. Description

SKY : Shielded Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre-Filter

SPSGRF-868 / 915 SubGiga (868 or 915 MHz) programmable transceiver module Datasheet

Solutions for a Real Time World. Unigen Corp. Wireless Module Products. PAN Radio Modules Demonstration & Evaluation Kit UGWxxxxxxxxx (Part Number)

CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range

QPC6222SR GENERAL PURPOSE DPDT TRANSFER SWITCH. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information

AIFA TECHNOLOGY CORP.

ROBOT-M24LR16E-A. Evaluation board for the M24LR16E-R dual interface EEPROM. Features. Description

STEVAL-IKR001V7D. Sub Ghz transceiver daughterboard with power amplifier based on the SPIRIT1. Features. Description

MAAP DIEEV1. Ka-Band 4 W Power Amplifier GHz Rev. V1. Features. Functional Diagram. Description. Pin Configuration 2

TCP-3039H. Advance Information 3.9 pf Passive Tunable Integrated Circuits (PTIC) PTIC. RF in. RF out

QUICK START GUIDE SL-6. Powering and Wireless System for the 688 Field Production Mixer

SKY LF: GPS/GLONASS/Galileo/BDS Low-Noise Amplifier

STEVAL-ILL015V1. High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32. Features. Description

NanoCom ADS-B. Datasheet An ADS-B receiver for space applications

ProMOS. Bravo1601. Stand-alone BLE SMD Modules. Datasheet (V1.0) ProMOS Co., Ltd. IoT Solutions Provider.

VGA / Audio Extender Single CAT5 / CAT6 with RGB Delay Control & EQ

AN3075 Application note

HDMI 1.3 Receiver over Signal. CAT5/CAT6 Cable. Model #: HDMI-C5-R-M. 1

Obsolete Product(s) - Obsolete Product(s)

HDSP2X4. HDMI 2 x 4 Splitter with Full HD 1080p

PRO-ScalerV2HD VGA to HDMI & Audio Scaler Converter. User s Guide. Made in Taiwan

VGA & RS232 Extender SET over Single CAT5 with RGB Delay Control

SKY LF: 1.5 to 3.8 GHz Two-Stage, High-Gain Low-Noise Amplifier

Universal Wireless HDTV Adapter

Modular DAA with 2/4 Wire Convertor. XE0002D Block Diagram

STEVAL-IME002V1. Multi-lead electrocardiogram (ECG) and body impedance demonstration board. Features. Description

Obsolete Product(s) - Obsolete Product(s)

HD1-DX HDMI Extender

VGA / Audio Extender Single CAT5 / CAT6 with RGB Delay Control & EQ

1x4, 1x8, 1x12, 1x16 VGA Extender / Splitter over Single CAT5

DEMO MANUAL DC2668A LTC5552 3GHz to 20GHz Microwave Mixer with Wideband DC to 6GHz IF BOARD PHOTO

1X4 HDMI Splitter with 3D Support

VGA & Audio Receiver SET over Single CAT5 with RGB Delay Control

Test Report TIDA /14/2014. Test Report For TIDA Aptina Automotive Camera Module 02/14/2014

5 Port DVI Splitter VIDEO WALLS VIDEO PROCESSORS VIDEO MATRIX SWITCHES EXTENDERS SPLITTERS WIRELESS CABLES & ACCESSORIES

Multi-channel LED driver with integrated boost controller for medium, large LCD panel backlight based on LED7708 and STM32F103C6T6A

STEVAL-IHM025V1. 1 kw 3-phase motor control demonstration board featuring the IGBT SLLIMM STGIPL14K60. Features. Description

HD1-LX HDMI & IR Extender

Cat5 DVI-D Extender. User s Guide Avenview Inc. All rights reserved.

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

PRO-ScalerHD2V HDMI to VGA & Audio Scaler Converter. User s Guide. Made in Taiwan

DisplayPort to VGA Converter

Order code Package Connection. SPDC400FC12M0.60 Open frame Comb. October 2007 Rev 1 1/9

VGA, Audio & RS232 Extender SET over Single CAT5 with RGB Delay Control & IR Pass Through

Obsolete Product(s) - Obsolete Product(s)

4, 8, 16 Port VGA/ Audio Extender / Splitter With Local Output with SPDIF Model #: VGA-C5SP-8

Integrated Transceiver Modules for ZigBee / (2.4 GHz) Development Kit Available

RF1119ATR7. SP4T (Single Pole Four Throw Switch) Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information

STEVAL-SPBT2ATV2. USB Dongle for the Bluetooth class 2 SPBT2532C2.AT module. Features. Description

General purpose low noise wideband amplifier for frequencies between DC and 2.2 GHz

BAL-NRF01D3. 50 ohm balun transformer for 2G45 ISM matched Nordic s chipset: nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch. Features.

SDI-HDRPTPRO. User Manual. HD-SDI Repeater with Signal Equalization & Re-clocking. Version 1.2

User Manual rev: Made in Taiwan

TGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information

4, 8, 16 Port VGA and Audio Extender / Splitter with Audio over Single CAT5

HDBaseT HDMI Extender

IEC compliant smart meter system for AMI applications based on STM32, ST7570 PLM, and STPMC1/STPMS1 chipset

GM60028H. DisplayPort transmitter. Features. Applications

EVALPM8803-FWD. EVALPM8803-FWD: IEEE802.3at compliant demonstration kit with synchronous active clamp forward PoE converter. Features.

3G/HD/SD-SDI to HDMI Converter

VideoEase HDMI 3x1 Switcher Kit (110V) Installation Guide

User manual for Bluetooth module (Model: MY-DJAP-BD)

CrystalView DVI Micro-DL Extender

TIL311 HEXADECIMAL DISPLAY WITH LOGIC

STEVAL-IHM024V W 3-phase inverter using the L6390 and STGDL6NC60DI for vector control. Features. Applications. Description

CV-005B. Mini Component to HDMI Converter. User Manual. Made in Taiwan

8 Port HD/SD-SDI Video Switch with 2 Port Splitter

TGA2218-SM GHz 12 W GaN Power Amplifier

VJ 6040 UHF Chip Antenna for Mobile Devices

Surface Mount Multilayer Ceramic Capacitors for RF Power Applications

Setup Guide. Introduction

TGA2238-CP 8 11 GHz 50 W GaN Power Amplifier

SKY LF: GHz 4x2 Switch Matrix with Tone/Voltage Decoder

M24SR-DISCOVERY. Discovery kit for the M24SR series Dynamic NFC/RFID tag. Features

Surface Mount Multilayer Ceramic Capacitors for RF Power Applications

HD-One DX/DX500 HDMI Extender

CN12 Technical Reference Guide. CN12 NTSC/PAL Camera. Technical Reference Guide PCB Rev

Owner s Manual MRX-4SEN. Sensor Extender

TGA4541-SM Ka-Band Variable Gain Driver Amplifier

Setup Guide. Introduction

STEVAL-IHM021V W, 3-phase inverter based on the L6390 and UltraFASTmesh MOSFET for speed FOC of 3-phase PMSM motor drives. Features.

STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description

Wideband silicon low-noise amplifier MMIC

Wireless HDMI Extender. Model

Transcription:

Mini Gateway USB for ModFLEX Wireless Networks FEATURES Compatible with all modules in the ModFLEX family. USB device interface & power Small package size: 2.3 x 4.9 External high performance antenna. APPLICATIONS Lighting Control Sensor Networks Security HVAC Control Medical Smart Energy DESCRIPTION The Mini Gateway USB (MGU) is a device that allows you to access your wireless network through a USB Host interface, and supports the use of a ModFLEX module. Need to get to market quickly? Not an expert in wireless? LS Research design services would be glad to develop a custom hardware or software solution for you. Contact us at sales@lsr.com or call us at 262-375-4400. 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 1 of 13

BLOCK DIAGRAM USB Interface FT232 FTDI USB Controller UART Antenna JTAG Interface JTAG ModFLEX Module Status LEDs (3) Figure 1 Mini Gateway USB Block Diagram High-Level ORDERING INFORMATION Order Number Description 450-0027 ModFLEX MGU with SiFLEX02 Module 450-0102 ModFLEX MGU with ProFLEX01-R2 Module Table 1 Mini Gateway USB Model Numbers Mini Gateway USB Contents Mini Gateway USB (MGU) with ModFLEX Transceiver Module Micro USB Cable 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 2 of 13

TABLE OF CONTENTS FEATURES... 1 APPLICATIONS... 1 DESCRIPTION... 1 BLOCK DIAGRAM... 2 ORDERING INFORMATION... 2 Mini Gateway USB Contents... 2 USB Controller... 4 ModFLEX Module... 4 Antenna... 4 ELECTRICAL SPECIFICATIONS... 5 Absolute Maximum Ratings... 5 Recommended Operating Conditions... 5 Power Consumption... 5 UPDATING FIRMWARE... 6 SHIPPING, HANDLING, AND STORAGE... 7 Shipping... 7 Handling... 7 Storage... 7 AGENCY STATEMENTS... 8 SiFLEX02... 8 ProFLEX02-R2... 8 AGENCY CERTIFICATIONS... 9 EUROPE PROFLEX01-R2... 9 CE Notice... 9 Declaration of Conformity (DOC)... 9 MECHANICAL DATA... 10 PRODUCT REVISION HISTORY... 12 CONTACTING LS RESEARCH... 13 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 3 of 13

GATEWAY OVERVIEW The MGU provides a direct interface to the on-board ModFLEX module through the USB interface. Command and control of the module is achieved through the standard host protocol commands. See the module specific Host Protocol Document for more details. These commands can also be exercised though the ModFLEX Test Tool Suite. USB Controller The Mini Gateway USB uses a FTDI FT232 USB-to-Serial bridge. The FT232 is a highly-integrated USB-to-UART bridge controller. The FT232 includes a USB 2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, and UART with full modem control signals. Please refer the FTDI web site for the latest drivers for the FT232 (www.ftdichip.com). ModFLEX Module The ModFLEX module can be any one of LSR s radio transceiver modules that are a member of the ModFLEX family of products. This includes the SiFLEX02 and ProFLEX01 modules. All ModFLEX modules are pin compatible and drop into the same PCB footprint to allow maximum flexibility. There are three LEDs that are used to provide status to the user: Green Indicates that the ModFLEX module is operational (heartbeat). Yellow Indicates that there is activity on the host interface. Red Indicates RF activity. Antenna The MGU is equipped with a high performance external antenna that can be arranged in different orientations to accommodate various mounting configurations. The environment the module is placed in will dictate the range performance. The non-ideal characteristics of the environment will result in the transmitted signal being reflected, diffracted, and scattered. All of these factors randomly combine to create extremely complex scenarios that will affect the link range in various ways. It is also best to keep some clearance between the antenna and nearby objects. This includes how the module is mounted in the product enclosure. Unless the items on the following list of recommendations are met, the radiation pattern can be heavily distorted. Keep metal objects as far away from the antenna as possible. Do not embed the antenna in a metallic or metalized plastic enclosure. 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 4 of 13

ELECTRICAL SPECIFICATIONS Absolute Maximum Ratings Parameter Min Max Unit Power supply voltage (VCC) -0.3 +6.0 V RF input power, antenna port Note 1 dbm RF input power, transmit port Note 1 dbm Operating temperature -40 +85 ºC Storage temperature -40 +85 ºC Table 2 Absolute Maximum Ratings 1 Recommended Operating Conditions Parameter Min Typ Max Unit Power supply voltage (VCC) +4.5 5.0 +5.5 Vdc Ambient temperature range -40 25 70 ºC Table 3 Recommended Operating Conditions Power Consumption Parameter Test Conditions Max Unit Transmit mode +25 C 350 ma Receive mode +25 C 140 ma Table 4 Power Consumption Note 1: For information that is specific to a certain ModFLEX module, please refer to the individual datasheet for that particular module. 1 Under no circumstances should exceeding the ratings specified in the Absolute Maximum Ratings section be allowed. Stressing the module beyond these limits may result permanent damage to the module that is not covered by the warranty. 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 5 of 13

UPDATING FIRMWARE The firmware on the module may be updating via JTAG using J3. Figure 2 Module Programming Header Figure 3 Programming Header Schematic 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 6 of 13

SHIPPING, HANDLING, AND STORAGE Shipping The MGU is shipped in individual packages. Handling This product contains highly sensitive electronic circuitry. Handling without proper ESD protection may damage the unit permanently. Storage Do not store in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX. Do not store in direct sunlight. The product should not be subject to excessive mechanical shock. 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 7 of 13

AGENCY STATEMENTS See the appropriate Module Datasheet for detailed information regarding agency approvals. SiFLEX02 Contains Transmitter Module FCC ID: TFB-SIFLEX2 Contains Transmitter Module IC: 5969A-SIFLEX2 The OEM of the SiFLEX02 Module must only use the approved antenna(s) listed above, which have been certified with this module. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. This device is granted for use in Mobile only configurations in which the antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all person and not be co-located with any other transmitters except in accordance with FCC and Industry Canada multitransmitter product procedures. ProFLEX02-R2 Contains Transmitter Module FCC ID: TFB-PROFLEX1 Contains Transmitter Module IC: 5969A-PROFLEX1 The OEM of the ProFLEX01 Module must only use the approved antenna(s) listed above, which have been certified with this module. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. This device is granted for use in Mobile only configurations in which the antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all person and not be co-located with any other transmitters except in accordance with FCC and Industry Canada multitransmitter product procedures. 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 8 of 13

AGENCY CERTIFICATIONS This device is FCC and IC certified; see the appropriate module (ProFLEX01-R2 or SiFLEX02) for specifics. This device is CE certified with the ProFLEX01-R2 module. EUROPE PROFLEX01-R2 CE Notice This device has been tested and certified for use in the European Union. See the Declaration of Conformity (DOC) for specifics. Declaration of Conformity (DOC) The DOC can be downloaded from the LSR Wiki. 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 9 of 13

MECHANICAL DATA Figure 4 Enclosure Envelope Figure 5 Mini Gateway USB Front Port Identification 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 10 of 13

Antenna Port Figure 6 Mini Gateway USB Rear Port Identification 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 11 of 13

PRODUCT REVISION HISTORY 450-0027 SiFLEX02 MGU Rev 3: Initial production release. 450-0102 ProFLEX01-R2 MGU Rev 1: Initial production release. Rev 1.1: Added the CE mark to the label. Previous versions are also CE certified, although they don t have the CE Mark on the label. 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 12 of 13

CONTACTING LS RESEARCH Headquarters Website Wiki Technical Support Sales Contact LS Research, LLC W66 N220 Commerce Court Cedarburg, WI 53012-2636 USA Tel: 1(262) 375-4400 Fax: 1(262) 375-4248 www.lsr.com wiki.lsr.com forum.lsr.com sales@lsr.com The information in this document is provided in connection with LS Research (hereafter referred to as LSR ) products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of LSR products. EXCEPT AS SET FORTH IN LSR S TERMS AND CONDITIONS OF SALE LOCATED ON LSR S WEB SITE, LSR ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL LSR BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF LSR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. LSR makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. LSR does not make any commitment to update the information contained herein. Unless specifically provided otherwise, LSR products are not suitable for, and shall not be used in, automotive applications. LSR s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. 330-0067-R2.0 Copyright 2011-2012 LS Research, LLC Page 13 of 13