Installatin Pyramix 10 Release Ntes Please cnsult the Installatin Guide lcated n the Pyramix Installatin Media (USB Memry card) fr details n the hardware and sftware installatin prcedure and Authrizatin Key registratin prcess. RAVENNA users will have t install the NET-MSC-GBEX1 PCIe Ethernet card prvided by Merging Technlgies. TURN YOUR COMPUTER OFF (shut dwn then switch the pwer ff). Next plug the NET- MSC-GBEX1 card int ne f the PCI-Express bus slts n yur cmputer and turn the pwer back n. The NET-MSC-GBEX1 card will nly be peratinal nce the MassCre runtime is installed. Refer t the Pyramix Installatin Guide fr mre details. T install the Pyramix Virtual Studi sftware insert the Pyramix Virtual Studi Installatin Media - the installatin prgram shuld aut-start. T install MassCre launch the MT Security Settings, g t the MassCre page and install the MassCre RunTime (a MassCre base key is required alng with MassCre 64bit and a RTX64 key). Refer t installatin guide fr mre details. Updates Please check ur Web site http://www.merging.cm peridically fr infrmatin, patches and updates. * Mykerins bards are nt supprted under 64 OS.
Pyramix v10 Install Prcedure Additinal details n the System Requirements available in the Pyramix V10 Installatin Guide. INSTALLER INFORMATION: Pyramix v10 is cmpatible with the fllwing OS Windws 7 Prfessinal (64bit): MassCre/RAVENNA, Native & Native/RAVENNA Windws 8.1 Prfessinal (64bit): Native & Native/RAVENNA supprt ONLY (n MassCre). Ntes: RAVENNA users must install the NET-MSC-GBEX1 PCIe Ethernet card prvided by. Refer t the Pyramix v10 Install guide fr details MassCre/RAVENNA is nly supprted under Windws 7 64bit alng with the MassCre NET-MSC-GBEX1 PCIe Ethernet card. As f Pyramix v10 the Mykerins and 32bit Operating systems are n lnger supprted The HASP security dngles are nt supprted fr users running the 64bit installer n a Windws 7 64bit OS. Fr such cnfiguratin yu must purchase a SafeNet dngle, see with yur lcal Merging sales ffice The Pyramix v10 installer cmes nly as a 64bit versin (64bit OS) INSTALLATION: User can refer t the Pyramix v10 Installatin Guide Pyramix v10 users must have valid v10 keys (previus v9 are n lnger valid) STEP 1: Merging recmmends that yu remve the present Pyramix versin installed Befre ding s yu can back up yur Prjects and save yur settings, keybard shrtcuts, templates. 1. Afterwards g t the Windws Cntrl Panel 2. Select Prgrams and Features (Windws 7) and remve the installed Pyramix versin Ntes: MassCre users shuld remve their current Pyramix v9.1 r Pyramix v10 and rebt prir t installing Pyramix v10. STEP 2: 1. Make sure that yu dwnlad the Pyramix v10-64 bit installer 2. Lg n with administratr rights (If yu had a Pyramix versin installed under 64bit make sure that yu remve it) 3. Run the Pyramix v10 64bit installer 4. If asked t install Uncertified Micrsft Drivers please cntinue and cnfirm the install authrizatin (d nt use Wizard autmatic detectin). Yu can als enable the Always trust ptin 5. Users might als be asked t install pending requirements like Micrsft Visual C++ 2010 r Bnjur fr Windws, please prceed. Rebt nce all has been installed STEP 2: Once Pyramix 10 is installed MassCre users must fllw these steps: 1. Bt yur system selecting the MassCre Bt line if present, then the launch MT Security Settings and select the MassCre Tab. 2. Chse the Uninstall MassCre RunTime ptin and rebt. There will be tw cnsecutive rebts. Nte: If yu have bted yur system and did nt select the MassCre Bt line while it was available an installed and had already entered yur keys yu will rather have an Install MassCre RunTime ptin. Yu must prceed with the step 1 descriptin. 3. Once MassCre had been remved, rebt selecting the NON-MassCre Windws Bt line. If yu experience any prblems please refer t the Trubleshting dcument here: http://www.merging.cm/uplads/assets/installers/pyramix_8_1/intervalzerrtx_uninstall_trublesht.pdf 4. Launch MT Security Settings and Enter yur v10 tgether with the new RTX64-2014 key. Nte: RTX DONGLE USERS (SSK-HUD-RTX) MUST FIRST INSTALL ITS DRIVER MANUALLY : http://sentinelcustmer.safenet-inc.cm/sentineldwnlads/?s=&c=end+user&p=sentinel+hasp+hl&=all&t=all# Select Sentinel HASP/LDK - Windws GUI Run-time Installer 5. Select the MassCre Tab and chse the Install MassCre RunTime ptin. 6. One RTX64 Driver apprval dialgs will appear. Accept bth and rebt the system.
Nte: Please nte that the installatin prcess can take sme time t prceed. 7. After installatin yu shuld see an Interval Zer entry in Windws Cntrl Panel > Prgrams and Features. This shuld read: Interval Zer RTX64 2014 Runtime with Service Pack 1. 8. Launch the VS3 Cntrl Panel and cnfigure it fr MassCre - RAVENNA Refer t the Pyramix v10 Installatin Guide fr all details. Warning: Flux VS3 users must remve their ld Flux vvs3 versin and install the Flux VS3 fr Pyramix v10 https://www.fluxhme.cm/dwnlad RECOMENDATIONS: MassCre: Pyramix v10 requires v10 keys. A new MassCre Key is required as f the Pyramix v10 (Beta4 and abve) Refer t Pyramix v10 Installatin Guide fr all details as sme specific BIOS settings are recmmended. MassCre RTX -64 bit users can run with Hyperthreading enabled. Merging recmmends Hyperthreading users t run with the MassCre SMP key. As f Pyramix v10 (Beta4 and abve) MassCre user will need t uninstall their previus MassCre befre updating t the latest versin (refer t installatin Steps abve) Users running MassCre 64bit will nt be able t mve their license t anther system (r the same system after a Windws re-installatin) unless first making this demand thrugh Merging keys@merging.cm Please justify the reasn f yur system migratin r reinstallatin as the RTX64 key is nt meant t be frequently renewed. If Merging cannt fllw up in a quick time respnse (in case f emergency r during weekends) please then cntact the Interval Zer (RTX) Sales team sales@intervalzer.cm This is s because the MassCre/RTX 64bit keys are nw linked t the system/hardware. A slutin exists fr users wh wuld which t have their MassCre/RTX 64bit keys n a secnd Dngle, instead f having it linked t a unique system. Please cntact a Merging sales partner ffice near yu, if this is what yu d desire (Merging ptin SSK-HUD-RTX) D nt un-install MassCre/RTX64 bit as this might vid yur current RTX 64bit key. The RTX64 key will then have t be renewed. RAVENNA: Refer t the Merging RAVENNA Netwrk Guide fr all details. Disabling Windws Firewall is recmmended (n internet cnnectin recmmended) Merging recmmends setting the Merging MassCre NIC Ethernet card and Hrus t Aut IP addressing Enable RAVENNA mde frm the VS3 Cntrl Panel (NOTE: the Merging Interface must be cnnected) We recmmend the installatin f the Ggle Chrme brwser fr Hrus remte access Use RAVENNA Easy Cnnect (installed with Pyramix v10) t manage the RAVENNA I/O cnnectins Users can cnnect multiple Hrus s thrugh the Merging certified Dell netwrk switch. Refer t the Merging RAVENNA Netwrk guide fr all details and cnfiguratin. http://www.merging.cm/prducts/hrus/dwnlads Ntes: Fr users with Pyramix and VCube installed n the same system, it is mandatry that yu upgrade t VCube 6 t g alng side this Pyramix v10. Be aware that VCube v6 is nt supprted n Windws 8.1. MassCre RTX64 User upgrading their prcessr must fllw a specific prcedure, please cntact supprt@merging.cm fr mre details. A new MTCleanUp v10 utility is available thrugh Merging s Supprt fr thse having prblems with their installatin As f Pyramix v10 the splashscreen is displayed n tp f the screen at launch t avid hidden ppup messages behind it.
New Features New General Mixing Bus: Pyramix 10 Release Ntes A set f new Mixing/Aux Bus types have been added: the General Mixing Bus It prvides a replacement fr the pre-existing buses ** The ld buses are cnsidered Legacy and are in a sub-menu called Legacy The General Mixing Bus can have 4 flavrs: Mix Bus Mix Grup Aux Bus Aux Grup Bus have utputs that can be cnnected t physical utputs (I/O r internal Buses) Grups are summing bjects which can then be ruted directly t anther Bus r Grup General Mixing Buses have a maximum speaker cunt/bus currently limited t 32 speakers Each channels can be typed, ut f the new extended Channel Types listed belw, including 3D types When creating a new General Mixing Bus, (Right-click menu > Bus > Add > New General Mixing Bus r by using the Cnfigure Page>Tplgy) the chice is given fr ne f the 4 flavrs, the number f channels and a chice f predefined channel types (r speaker arrangements) General Mixing Buses can als be given an ptinal Rm Size. In this case the panning algrithm changes t a distance based algrithm. (see belw) An existing General Mixing Bus speaker tplgy can be mdified after its creatin by using the Rm Editr, available by clicking n the tp cntrl f the I/O & VCA sectin n the bttm f the Mixer. General Mixing Buses (each flavr) have the same cntrls in the Mixer user interface: A send peak meter. Clicking n it cllapses/expands the bus An On/Off buttn A Gain value bx t enter a precise value manually An hrizntal Gain display and cntrl bx A Pre-Fader ptin buttn A Ruting/Panning ptin bx When Channel Ruter is selected a little grid appears belw it allwing t pen an extended grid ruter When Panner is selected (r Panner 1, Panner 2, etc ) The bus will fllw the selected Panning bus t pan/mix the signal in its channels. (see belw fr details n the Panning Bus) A New Bus Trim ptin will appear when Bus Panner mde is selected. This allws Speakers/Buses t be independently cnfigured per Strip t Bus. The Bus Panner mde nce selected will display a Speaker Bus Trim cnfiguratin where users can calibrate r mute speaker independently. Expected Limitatin with the New General Bus and ld Legacy Bus cmbinatins: Due t the different architecture used in the new buses, it is nt recmmended that yu perate a mixer cntaining bth if at all pssible. There are a number f limitatins surrunding this utlined belw. When deciding n which types f buses t use, it is crucial t understand the limitatins that are inherent in a system with 2 ways f emplying Buses. Please ensure that if yu are ging t use the new Buses and panning that yu cnvert ALL f yur Buses t this new type. Or if yu are building a new prject, make sure t chse t use the new buses nly. Legacy SubGrup buses will nt feed int New General Buses Please cnvert the SubGrup t the New Aux Grup Old and New Buses will nt wrk tgether when cnnected t SmartAV Tang & Tang2 cntrllers This can cause a crash f the Tang2 firmware. Please ensure yur mixer cntains nly ld r nly new buses befre cnnecting t the Tang/Tang2 cntrller.
Frmer legacy Buses can be cnverted t new General Mixing Buses. Right click n the legacy bus and select Bus > Cnvert Bus XXX t the General Mixing Bus mdel Warning: It is imprtant t cnvert legacy Buses fr cmpatibility purpses A new General Mixing Bus will be created fr legacy Surrund Buses, Stere Buses and Mn Buses A new General Aux Bus will be created fr legacy Aux Buses A new General Aux Grup will be created fr legacy SubGrup Buses In any case a new Panning Bus is created (see belw New Panning Bus) and assciated with the New General Mixing Bus and all autmatin related t the legacy bus is transferred t the new Panning Bus. Fr Surrund Buses: Fr Multi-Stems Surrund grups, multiple General Mixing Buses will be created, ne per stem. This is the new paradigm fr multi-stem. Each new Bus/Stem can be mdified later with the rm editr (see abve) t reduce (r extend) the number f channels independently fr a mre ptimized use f Buses channels and I/Os. The new Panning Cntrl Bus Panner Type is set t Surrund Panner fr all input strips, but can be changed later t 3D Panner r Pan/Balance strip per strip. The new Panning Cntrl Bus is set t Dual Surce Mde Dual Panner fr each Stere input strips. The Channel Ruter ptin is selected fr any MCS (frmerly GPS) input strips and the grid set as per the legacy bus. Hwever it s recmmended t switch back t the Panning Bus fr a full new re-panning mde. Fr Stere Buses: The new Panning Cntrl Bus Panner Type is set t Pan/Balance fr all input strips, but can be changed later t 3D Panner r Pan/Balance strip per strip. The legacy mde is cnverted t the new Panning Bus mdes Balance, Single Pan, Dual Pan (see belw) Fr Mn Buses: Due t the architecture f the new busses, mn mix busses are nw cnverted int Mn Aux busses and nt anymre t Mn Mix buses as Mix buses have n gain cntrl New Panning Cntrl Bus: A new Panning Cntrl Bus has been added This bus allws fr cntrlling panning infrmatin in 1D (Left/Right), 2D (Surrund) r 3D (Full Space) This bus desn t prcess any audi and has n channels, n assciated utput strip and n I/O Any New General Mixing/Aux Bus/Grups will use the Panning Cntrl Bus fr panning sund in their channels. The same Panning Cntrl Bus can pan sund fr any channel mapping f any General Mixing Bus, i.e. the same panning infrmatin f the same input strip can cntrl a 9.1 Mixing Bus, a 5.1 Mixing Grup and a Stere Aux Grup at the same time, fr instance. Generally ne single Panning Cntrl Bus is required fr all Mixing Buses, hwever Multiple Panning Cntrl Buses can be created if needed if different panning infrmatin is required fr the same input strip n different Mixing Buses. (Right-click menu > Bus > Add > New Panning Cntrl Bus) The in-strip User Interface fr the Panning Cntrl Bus can be switched t 3 different Panner Types (Right-click menu n the Panning Bus > Set Panner Type):
3D Panner, giving access t the standard 2D surrund cntrl plus the Height/Z axis, the divergence and the LFE gain. 2D Panner, giving access t the standard 2D surrund, the divergence and the LFE gain. Pan/Balance (1D Panner), giving access t three flavrs f panning (belw) plus divergence and LFE gain: When n a Mn Strip, the cntrl is always a Pan When n a Stere Strip, the fllwing chice is ffered as Dual Surce Mde (Right-click menu n the Panning Bus > Dual Surce Mde): Single Pan Dual Pan Balance Divergence has been given a Type: Divergence Type are: 1D (Left/Right) : the divergence nly spreads Left/Right 2D (L/R - F/R) : the divergence spreads n the traditinal surrund space, like per legacy surrund Buses 3D (L/R - F/R T/B) ; the divergence spreads n the whle 3D space The Divergence Type can be changed per Strip The Divergence Type can be changed by right clicking n any strip in the cnsle The Divergence Type can be changed in the 3D Panning Cntrl Bus windw The selected Divergence Type is displayed in the 3 views f 3D Panning Cntrl Bus windw The 3D Panning Cntrl Bus windw cntrls and buttns have changed their lk t accmmdate with the Left/Right Pan/Dual Pan and Balance mde and t the Tp/Bttm Clr Cding The Autmatin fr the panning infrmatin is assciated with the Panning Cntrl Bus and the same fr any General Mixing Bus sharing the Panning Cntrl Bus (bviusly). Autmatin fr the Send On/Off, Send Gain, Pre/Pst Fader is assciated with each General Mixing Bus, independently New MS (Middle Side) Decding in New Bus Architecture The new General Mixing Bus nw decdes the MS directly and withut the additin f any additinal user interface. Users can feed an MS strip with Middle and Side infrmatin as befre, and nw the panner itself will decde the Left and Right infrmatin and feed it directly t the cnnected Buses. If yu switch the Bus cnnectin t use the Channel Ruter instead f the Panner, yu will be able t then rute the raw C and W signal thrugh the bus instead. There is a temprary lss f the additinal Middle and Side Mixing cntrls which existed in the ld-style bussing cnnectin. S, when using the new General Mixing Buses, users will need t mix between the Middle and Side levels by using Clip Gains & Clip Envelpes. This functinality will return in a subsequent release f the Pyramix sftware. Advanced Panning Cntrl Bus Windw: When Duble Muse Clicking n a Panning Cntrl Bus Panner, the Advanced Panning Cntrl Bus Windw pens. It gives access t 2 views fr 3D panning, Tp View (frm Tp), Back View (frm Back). All speakers/channels f all General Mixing Buses cnnected t that Panning Cntrl are displayed in grey The level f audi/gain actually sent t these speakers are indicated in the layer clr cde prprtinally f the sund level. The speakers clr cde is Red fr the standard layer, Green fr the Tp Layer, Blue fr the Bttm Layer and Yellw fr the LFEs. Panning can be dne directly by mving the Panner in any f the three views Sliders fr the X, Y Z axis are available belw the three views When n a Stere Strip, the chice fr the Re-Panner r the Dual Surce sliders are available depending n the selected Dual Surce Mde (see abve) The Single Pan Dual Surce mde default Surce Size value is 100%
When n a Multi-Channel Strip r n a Stere Strip with Dual Surce Mde set t Single Pan, the Re-Panner cntrls are available: A Surce Size slider allws fr spreading the input Surces Three Rtatin Sliders allws fr rtating the input Surces in the X, Y, Z axis A new Objects Bus has been created: Specially created fr Dlby Atms wrkflws, this bus prvides a separated utput t send t a cnsle when mixing fr this frmat An Objects Bus is created by selected the right muse buttn menu > Bus > Add > General Mixing Bus r by using the cnfigure page>tplgy>add Bus, then selecting the Object Bus ptin in the dialg bx, then chsing Channels Mapping t Custm and entering the desired number f Object Channels fr the bus The Objects Bus shws a Grid fr every Strips allwing the display the Objects Ruter. The Objects Ruter allws fr selecting ne r mre Objects Channels t send all input channels f the given Strip t that Object Channel. When input is ruted t the Object bus, all ther Buses fr that strip input are muted, like fr a Sl. Objects Bus Ruting is autmated. Input sund can be sent fr a limited time t any Objects Channel. When the bject bus is enabled, it DISABLES feeds t all ther buses, ensuring that nly the bject bus receives the signal. Objects Buses can be enabled and Disabled thrugh the right side [+] ppup menu. This allws temprarily disabling any Object sending in the Object Bus and keep all input audi in its Bed fr editing and mnitring. 3D Rm Editr: All General Mixing Buses can have their channel cnfiguratin edited at all time with the 3D Rm Editr All channels f the Mixing Bus can be seen as a Speaker in that Rm The 3D Rm Editr is available by clicking n the tp cntrl f the I/O & VCA sectin n the bttm f the Mixer Duble clicking n a speaker in the 3D Panning Cntrl Bus windw sets the Panner exactly t that speakers, in every X/Y/Z axis. This ensures sunds nly utputs t that very speaker. The channel cnfiguratin r 3D Rm can have tw types: Virtual: Virtual Rm d use a Stere Panning based algrithm using either a Square Rt r Sin/Cs panning law, extended t all 3 dimensins The nly parameter in the Square Rt - Sin/Cs chice available either in the Mixer Settings > All Settings > Mixer Settings page This parameter called Virtual Pan Law has been added in the 3D Panner Windw as well In this mde the Channels r Speakers can nly be f the 32 predefined types listed belw The Channel Type directly defines the psitin f the Speaker in the Rm The Rm has n real size, the panning algrithm nly uses amplitude fr cmputing levels based n the psitin f each Speakers/Channels, that is defined by its Channel Type The algrithm makes sure that the levels are very fcused near the clsest speaker t the Panner This mde is designed fr Film, Pst-prductin r Music where n real rm definitin is needed r knwn in advance and precisin is needed t fcus n a given Speaker Sized: Sized Rms d use a Sund in Air prpagatin/attenuatin based algrithm By default the sund attenuatin depends n the distance frm the panning surce t each speakers by 1/d
A parameter called Sized Pan Attenuatin has been added in the 3D Panner Windw t allw exaggerating r reducing the effect f distance n the attenuatin by a factr f 5 times in either exaggerating r reducing. Central psitin means default attenuatin is 1/d, mving the parameter t the right exaggerates the effect f distance, mving the parameter t the left reduces the effect f distance. In this mde the Rm has a size and the Speakers have a editable psitin, independently f their Type, that is nly infrmative in this mdel The Rm Size definitin is the Radius f the cubic Rm, i.e. half its bundary size The psitin f each Speakers is editable in the Rm Editr. The selected Speaker displays in Orange and its crdinates can be changed in the editr The Editing Tls allw fr editing the Speakers psitin either relative t the center f the rm, r t a given reference Speaker The panning algrithm uses real distances t cmpute levels. In this mde basically all Speakers utput sme level, even is very lw, wherever the Panner is psitined An Output Gain Trim is available fr each Speakers/Channels The physical ruting f each Speakers/Channel can be changed in the Rm Editr
Mnitring Sectin: The Mnitring Sectin has been mdified t accmmdate with the new Channel Types (listed belw) The central sectin displaying the Sl/Mute buttn has been replaced by a 3D view ptentially displaying all available new Channel Types The utput level fr each mnitring utput is nw displayed as a glwing effect arund each Channel buttns fr easy identificatin Additinal Factry Speakers Sets with Dwn-Mix have been added Added link fr Sl(X), Mute, Phase. When a speaker is part f a grup, the speaker actin is applied t the whle grup. A buttn has been added next t the Mute Sl. Link Mdes Menu: Link OFF: N link applied t selected parameters (Mute, Sl, Sl X, Phase ) Link X Links Left with Right (and everything alng each X Axis) Links the left side with the right side (L+ C + R & Ls +Rs & Lr + Cs + Rr etc in each in each height layer separately) Link Y Links the Frnt with the Back (and everything alng the Y Axis) Links the assciated Frnt with the side and rears (L + Ls + Lr & C + Cs & R +Rs + Rr etc in each height layer separately) Link Z Links the assciated speaker in all the height layers (Tl + L + Bl etc) Link L Links the assciated speaker that are n the same Z layer LFE Includes the LFE n the selected Link mde Mixer: Cnfigure Page New General Bus supprt Knwn Limitatin: SubGrups and Aux Grups will nt appear n the Strip side and can t be mved frm the Cnfigure page. If yu want t mve thse arund use the Mix page (CTRL+SHIFT+ALT) Wrking frm Mix Page was imprved. Mst functins frm the cnfigure page can nw be achieved frm the Mix page by in either in the Muse+Right click dialg menu r at the bttm f the Mixer in the Strip pp-up menu. Sme tips n Mixer wrkflw: Mve Strip psitin selecting the strip numbering and using the CTRL+SHIFT+ALT keys pressed Select Multiple Strips by selecting the strip numbering with the CTRL key pressed Select a Range f Strips by selecting the strip numbering (first and last f the range) with the SHIFT key pressed Remve r add Strips frm the Muse+Right click dialg menu: Strip>Add r Remve Use the CTRL + SHIFT keys kept pressed t add Effects n all selected Strip Use the CTRL + SHIFT keys kept pressed t remve an effect psitin all selected Strip Change a Strip channel Type frm the bttm f the strip pp-up menu Bus, Auxes and Ruting cllapsing New: +- Buttn ptin added t the Mixer side cntext menu. Optin t hide r shw the desired Buses r Auxes (available by Bus r Aux Types) New: +_ Buttn ptin in the Ruting sectin. T Hide r Shw All Bus ruting sectins. When all Buses (Mix r Aux) are hidden, a ruting summary n ne single line is Visible
displayed. This is typically useful when wrking n multi-stems Buses t see a summary f all Buses cnnectins n ne line. Click t change the ruting per bus. Prject Management: New Wizard Pyramix v10 prject cntaining the new Buses layut/structure cannt be saved within a Save Special prject, a warning message will prevent yu frm ding s. Layut is integrating new Buses (available since v10) Users t chse between different Buses Mixing Bus Mixing Grup Aux Bus Aux Grup Allws users t then chse frm a list f predefined layut types. User can create multiple different strips types Miscellaneus: GPS strips have been renamed Multi-Channel Strips (MCS) New Channel Types: L"Left", L"Center", L"Right", L"Surrund Left", L"Surrund Right", L"LFE", L"Center Left", L"Center Right", L"Surrund Center", L"Side Left", L"Side Right", L"Center Surrund Left", L"Center Surrund Right", L"Vice f Gd", L"Tp left", L"Tp Center", L"Tp Right", L"Tp Surrund Left", L"Tp Surrund Center", L"Tp Surrund Right", L"Tp Side Left", L"Tp Side Right", L"Bttm left", L"Bttm Center", L"Bttm Right", L"Bttm Surrund Left", L"Bttm Surrund Center", L"Bttm Surrund Right", L"Bttm Side Left", L"Bttm Side Right",
L"Vice f Devil", L"LFE2", Predefined Speaker Arrangements: L"Mn", L"Stere", L"3.0 Frnt", L"3.1 Frnt", L"3.0 Surrund", L"3.1 Surrund", L"4.0 Quadr", L"4.1 Quadr", L"4.0 Surrund", L"4.1 Surrund", L"5.0 Side (THX)", L"5.1 Side (THX)", L"5.0 Surrund (SACD)", L"5.1 Surrund (SACD)", L"6.0 Side", L"6.1 Side", L"6.0 Surrund", L"6.1 Surrund", L"7.0 Side", L"7.1 Side", L"7.0 Surrund (SDDS)", L"7.1 Surrund (SDDS)", L"7.0 Surrund (THX)", L"7.1 Surrund (THX)", L"8.0 Surrund", L"8.1 Surrund", L"9.0 Surrund", L"9.1 Surrund", L"11.0 Surrund", L"11.1 Surrund", L"5.0 Dlby", L"5.1 Dlby", L"7.0 Dlby", L"7.1 Dlby", L"9.0 Dlby", L"9.1 Dlby (Atms)", L"7.0 DTS (Ne:X)", L"7.1 DTS (Ne:X)", L"9.0 DTS (Ne:X)", L"9.1 DTS (Ne:X)", L"11.0 DTS (Ne:X)", L"11.1 DTS (Ne:X)", L"10.2 TMH", L"12.2 TMH", L"8.0 Aur",
L"9.1 Aur", L"10.1 Aur", L"11.1 (7+4) Aur", L"11.1 Aur", L"13.1 Aur", L"22.2 Hamasaki/NHK", L"30.2 La Ttale", New VS3 Plugin: VS3 Algrithmix DeNiser & DeScratcher are supprted as f v10.0.7 HtFix Knwn issue: They might display Dem (while fully functinal) until the prject is saved, clsed & repen. New Flux VS3 Reverb (requires the prper IRCAM Tls Verb Merging Key) Flux IRCAM tls Verb Sessin: Supprts 2 channels and up t 384 khz Flux IRCAM tls Verb: Supprts 24 channels and up t 384 khz The IRCAM Verb v3 is an algrithmic rm acustics and reverberatin prcessr. It has a mdular cnstructin, emplying a recursive filtering reverb engine, reprducing and synthesizing the specific acustical characteristics f any spatial sund envirnment. Imprtant: As f Pyramix v10 a new Flux VS3 plugin versin is required. Find the first v10 Flux VS3 versin here. https://www.fluxhme.cm/dwnlad Cntrllers: OASIS EUCON Pyramix v10 Mixer cmpnent Supprt Pyramix v10 Mix Bus, Aux Bus, Mix Grup, Aux Grup supprt New 3D Panner Supprt Hrus/Hapi Mic Pre remte (frm EUCON cntrller Input sectin) available since v9. All parameters supprted, exceptin f Phantm pwer (fr security reasns) Labelling updated t EUCON2 in Settings Avid S3 requires the Business OASIS Key Avid S6 requires the First Class OASIS. S6 users shuld use the latest S6 firmware (v2.1>) fr the Pyramix Appset supprt. Nte: EUCON v3.2 Supprted Ramses: The v10 New General Buses are nt supprted Prject created with in a previus release (e.g. v8-v9) can be pen in v10 and will be supprted with Ramses There will be a warning errr If a v10 Prject with New General Buses is pened TANGO I r II users. Merging recmmend users t update t CnsleSft v3.3.0.18_2015.05.20 available at http://www.merging.cm/dwnlads Supprts New General Bus structure (Pyramix v10 cmes with new BUSES, refer t Release ntes) Metering & Mnitring is limited t a maximum f 6 channels (5.1 surrund) This means that the Tang I r II will nt display the Surrund Panner by example in 7.1 Channel Mapping view, yu can still mve the Panner Ball f a 7.1 channel mapping frm the Tang but the Surrund Panner will be displayed in a 5.1 Channel Mapping view.
V10 prject cntaining simultaneusly the New v10 and Legacy Master (v9<) Buses are nt supprted. Due t a limitatin in yur cntrl surface. A warning will be psted in Pyramix is yu have such an incmpatibility, if s the OASIS Transprt will be DISABLED in yur Pyramix Settings. This means that yu can pen a Pyramix v9.1 prject in Pyramix V10 and wrk with yur Tang II but yu cannt use the V9.1 Buses with the v10 New General Buses simultaneusly. S yu have 2 ptins: 1) Wrk with nly Legacy v9 and belw Buses (D nt add New v10 General Buses) 2) Wrk nly with New v10 General Buses (recmmended). Please fllw the steps belw t successfully use yur pre-v10 prjects with Yur OASIS cntrller by cnverting the Legacy Buses t the New v10 General Buses 1) Once yur prject is pen, cnvert yur legacy Master Buses t new nes (Right-Click>Bus>Cnvert...) 2) Save As... And give yur prject an amended name 3) Clse the prject and g int Settings>Cntrllers and Re-enable the Oasis Cntrller 4) Open the new prject with the cnverted buses. Vide Timeline/Playback Supprt: It s nw pssible t playback vide directly within Pyramix. This vide can be imprted thru the Interchange Imprt (Vide Clips, AAF, XML). When a multi-layer cmpsitin is imprted, Pyramix displays the layers under the main vide track (layers are inverted cmpared t mst vide editrs). The cmpsitin is dne bttm-up. In this example the smallest vide clip will verlay the 2 ther clips: Frm the vide track header it is pssible t patch the vide track t 1 f the 2 available vide utputs. Click n the vide utput buttn. User can als use the Mute and Sl fr Vide display And a ppup menu let yu select the vide utput fr the current track.
When several tracks are patched t the same vide utput, they are cmpsed in the bttm-up rder described previusly. 2 tracks patched n 2 different utputs will be displayed separately (see vide tab and vide Frames). This can cme handy fr vide cmparisn r in a multi-camera type wrkflw. Nte that by default, all imprted layers are patched and cmpsed int vide utput 1. Vide Frmat Supprt have tested and validated fr use the fllwing file types and cdecs in Pyramix s vide-in-timeline feature. Other cdecs and file types may wrk, but we currently will nly supprt the nes listed belw. Mv: DNxHD (8bit) **, PrRes 422 HQ, PrRes 422 LT, PrRes 422 Prxy, DV25, DV50, H264** MXF: DNxHD (8bit) **, XDCAM HD**, AVCi**, IMX**. Nte: 10bit DNxHD is nt supprted (perfrmance issue) Recmmendatins: T avid memry cnsumptin and impact n audi perfrmance, wrk with intraframe prxy files whenever pssible H264 is nt recmmended fr editing Vide files shuld be n separate drive, especially fr heavy Pyramix prjects ** DNxHD, AVCi, IMX, XDCAM HD, (H264 fr VCube Encding via Render) are all ptinal cdecs cme at an additinal cst t the Pyramix pack. Please cntact yur lcal Merging sales ffice if yu want t purchase ne r mre f these ptins. ** Vide Outputs can be displayed in 3 ways: 1- Vide Tab In View/Editr Tabs, yu can select the Vide tab. It displays all the patched vide utputs in a side-by-side cndensed manner. 2- Vide Output Frames Yu can als create Vide Output Windws(s) easily, each ne mnitring a single Vide Output. Click the Vide Output windws buttn r t Vide/New Vide Windw > New Vide
Output Windw 1-2. This will create a standard windw where the vide is displayed. The windw can be resized, mved, minimized, and maximized. It is useful in a multiple displays cnfiguratin r when a large vide surface is required. Right-click the Vide Output Frame t get access the cntextual menu. Yu can als expand the frame t Full Screen (right-click Full Screen again t exit the Full Screen mde). Save frame parameters (psitin, size and cntrls) are preserved at the applicatin level s glbal t applicatin and nt saved within prject. New tlbar vide ptin: One icn per vide utput is nw available, yu will see 4 icns but nly tw are usable at mst depending f yur Key pack. If yu d nt have access t 1 r 2 Vide utput this means that yu d nt have an eligible key. Tw mdes are available: A. Create vide utput frames (unlimited cunt) B. Tggle vide utput frames, shw/hide mde In such mde yu can assign a shrtcut and display r hide all the vide frames that are ruted t the respecting vide utput (1 r 2). This can be bypassed using the Always Visible cntextual ptin (see belw) Nte: We recmmend users wrking in DXD r DSD prjects t use nly 1 Vide Output track fr perfrmance reasns. 3- Vide Output Cntextual menu: Available frm Muse+Right click n Vide utput frame N aspect rati: Will nt resize the vide utput t its rati when changing the vide frame size 16:9 aspect rati: The Vide utput frame will display a 16:9 aspect rati 4:3 aspect rati: The Vide utput frame will display a 4:3 aspect rati Vide display size: Duble/Nrmal/Half/Quarter size ptins in cntextual menu
Hide Windws Frame: Hides the frame brder arund the vide. In such mde yu can mve the Vide windws by selecting it Always Visible: Will bypass the Vide tggle ptin and always keep the vide frame displayed. It means that this particular windw desn t hide when yu press the tggle vide windw fr this specific vide utput. This can be useful fr a bth r fixed DVI screen cnfiguratin where yu always want the vide t be displayed. Tp Mst: Will display the Vide utput n tp f all ther windws r dialgs Full Screen: Will display the Vide utput in full display screen Shw Overlay: Refer t Pyramix Settings>Vide Vide Settings (under All Settings>Vide): Vide Overlay: Users can enable: TimeCde Overlay (Destinatin TimeCde r Surce TimeCde) Vide Name (track, clip, media name) Vide Delay cmpensatin: Use Delay cmpensatin when vide is late n audi. The value is in frames. Graphics delay: cmpensates the graphic card(s) utput (cmpute screen) Vide delay: cmpensated the vide card(s) utput (Blackmagic Design). These are glbal user settings. Vide Card Outputs: The Vide card can be enabled under the Vide Settings (Requires the prper Merging Key) The Vide Output(s) are mirrred t this hardware when a supprted Blackmagic DeckLink hardware is installed n the cmputer. Black Magic supprt: Merging nw supprts Blackmagic design Vide Cards thru the DeckLink SDK. This cvers DeckLink, UltraStudi and Intensity prduct lines. Only Decklink Studi 4K has been validated s far. The DeckLink Studi mnitr is knwn t be wrking be has n Vide reference t ensure genlck.
Blackmagic design installer versin recmmended is 10.3.7 and abve (latest certified 10.4) G t https://www.blackmagicdesign.cm/supprt Vide System Cnfiguratin: Recmmended cnfiguratin http://newww.merging.cm/supprt/pc-cnfig Knwn: Pyramix MassCre with n-bard graphic: Culd ptentially experience perfrmance issue (Cre Peaks) with Vide prjects that have Cre readings f 30% t 35 % at base. Refer t ur recmmended cnfiguratin Pyramix MassCre with dedicated graphic card (nn n-bard): Such cnfiguratin will imprve the vide perfrmance. Refer t ur recmmended cnfiguratin Pyramix and VCube cmb n same system shuld nt be used with a PCIe Graphic card, nly the nbard graphic is supprted in that Refer t ur recmmended cnfiguratin Pyramix Native system: Vide Perfrmance will mstly depend n the system cnfiguratin Laptp users must set their Windws Pwer Scheme t High Perfrmance. Refer t ur recmmended cnfiguratin Ntes: Within the Pyramix timeline, yu can mve, cut, edit and disslve vide clips, the same way as audi. On the ther hand, yu can chse t lck vide clips, like any ther clip (Ctrl+L) t avid mdificatin f the vide cmpsitin while wrking n audi. The Vide thumbnails image frames generatin fr timeline display must be manually generated. This can be dne by selecting the Vide cntext menu (right Click n Vide track) and select Display>Generate Image. The Generatin can als be cancelled by Muse+Right Clicking and selecting Cancel Image Generatin n the generatin message at the bttm left crner f the Pyramix GUI Vide Frmats and Editing: Refer t the User Manual recmmendatins The Wrap is nt supprt The Vide playback drps are nw indicated, if the Playback Stall ptin is enabled (Settings>Applicatin>Playback/Recrd)
Imprvements MassCre: New MassCre versin (RTX64-2014) as f Pyramix v10 (Beta4 and abve). MassCre Memry 64-bit allcates has been increased frm 128 up t 256MB MassCre 256+ key hlders have nw Supprt fr 64 IO f 8FS/DXD/DSD64/128/256. Such perfrmance can nly be guaranteed with thse requirements Requirements fr 64 I/O f 8FS/DXD/DSD: Pyramix v10 Merging Turnkey System Windws 7-64bit MassCre 256+ Key MassCre SMP key recmmended (with Hyperthreaded cnfiguratin) System cnfiguratin based n Intel Cre i7-4790 r abve SSD required (Recmmended: 4x SSD Crucial M550 disks cnfigured in Raid 0 / 64k blck size r 4x Crucial MX200 1TB 2.5 SSD in Raid 0 / 64k r SSD-SAMSUNG MZ1000 available n Merging price list) MassCre must be set t Lw latency mde Recrd in single media (nt ne file per track) Use a Windws 7 Basic Theme fr ptimal perfrmance (avid Windws 7 Aer) Restrictin: Yu will nt be able t perfrm 64 Inputs f DSD256 r DSD128 (DSDIFF) in a DXD prject, but nly 32 r 48 inputs at max in such mdes. Nte: Wavefrm while recrding (Display&Generatin) are knwn t be very demanding. Fr better perfrmance it is be better t disable them while recrding. Fr lng cabling setup cnsider using cat-fiber extender RAVENNA ASIO: The Driver n lnger fllws the ASIO clck sampling rate prvided by Hrus/Hapi This have been changed s that Pyramix r external player (jriver) can change the sampling rate accrding t the frmat played. Initialize the ASIO driver nly when needed and n lnger set sample rate t 44k1 at ASIO Interface's initializatin Three ways t change the Hrus/Hapi sampling rate. 1) Manually change the sampling rate f the Hrus/Hapi device (in Frmat page) 2) Cnfigure the Hrus/Hapi t Aut mde (in Frmat page) 3) In RAVENNA Easy Cnnect enable the "Easy frce" then the RAVENNA Easy Cnnect will cnfigure the Hrus/Hapi with the ASIO Driver Sampling Rate. Nte: RAVENNA Easy Cnnect applies "easy frce" t RAVENNA ASIO Mixer: Final Check and the Meter Bridge are nw supprting New General Bus structure. Limitatins: Meter Bridge supprt fr Mixing, Aux busses and Grups Final Check desn't check the channel typing, s any busses that have tw channels will be prcessed as a L/R and any busses that have 6 channels will be prcessed as a L/C/R/Ls/Rs/LFE. Buses abve 6 channels are nt supprted Channel Mapping in Mixdwn up t 8 channels with 3 channel rder flavrs: Cedar supprt fr 64bit (refer t http://www.cedaraudi.cm/ )
Pyramix Native: Timecde and Audi synchrnizatin imprvements (benefiting fr lng runs) Warning: When the Native Audi engine it nt running the Timecde will nt be updated RAVENNA ASIO driver increased t 128 IO Refer t User Manual fr all details. Warning: Sme system cnfiguratin will nt be able t supprt such Input / Output number cunt as this will largely depend n the system cnfiguratin. If yu experience nise r glitches try reducing the IO cunt in the RAVENNA ASIO Panel and enable nly what is needed. If yu still experience nise r glitches try different Buffer Sizes in the RAVENNA ASIO Panel Merging Recmmended Desktp systems cnfigured fr Pyramix Native (RAVENNA ASIO) are knwn in general t have better perfrmance than laptps Album Publishing: The Album Publishing nw includes Trellis E Sigma Delta and SRC filter type setting. Thse additinal settings were added t prvide users with mre flexibility in their signal wrkflw. Existing utput frmats can nw be mdified by duble clicking n their entry in the list Pyramix Playback Settings: SRC Settings were renamed accrdingly: Disabled: SRC will nt be emplyed in real time n the timeline. Files at sample rates nt matching the prject can still be placed n the timeline, but will be played at the wrng speed. SRC Enabled: SRC will be emplyed n the timeline t crrect the playback speed f files which d nt match the prject sample rate Ultra-High Quality SRC: A mre refined SRC fr thse running smaller sessins and requiring even better real time cnversin. Due t the additinal prcessing resurces required this shuld nly be used n small track cunt prjects and if yu ntice drp uts when using this SRC type, yu shuld revert back t SRC enabled as the prject is drawing t many resurces t playback faithfully HEPTA SRC: Specially designed real time SRC fr use with DSD playback in DXD prjects r with ultra-lw track cunt mastering prjects. This SRC shuld nt be emplyed utside f these specific wrkflws as the prcessing pwer required will nt allw fr faithful playback in ther scenaris.
Fixed Bugs in V10.0.7 HtFix: GAIA-883: MTFF lssless causing artefacts, MTFF Lssless frmat ptin have been frm Pyramix within the media manager and audiengine,. Nte that the lssless ptin still available as an utput frmat. NAD-442: Fixed. JuceHandler Japanese Windws crash n sme files GAIA-881: Pyramix prjects V9, pen in V10: nce busses cnverted t General busses, prject saved, Pyramix crashes (refer t knwn issue belw GAIA-881) GAIA-821: Fixed. Ptential editing glitches and gaps GAIA-823: Fixed. New General Buses nt displayed in the surces list f SACD Cutting Master Wizard GAIA-825: Fixed. Pyramix dialg n lnger pening unless pressing ATL key GAIA-818: Pyramix vide jg and nudge shuld fllw in sync GAIA-815: Fixed. Audi editing crash/hang when slipping sme medias GAIA-816: Fixed. Vide Offset shuld nly be applied in Playback When getting back t preview state, we resync the vide s the ffset is reset. GAIA-855: Fixed. 2D/3D panners shw the 1D UI when cllapsed The Single Panner and Dual Panner mde shw the same as the Balance mde when panned full left r full right t shw that we are at full end. GAIA-815: Fixed. Audi editing crash/hang when slipping sme medias GAIA-789: Fixed. Pyramix crashes while reading prres444 GAIA-490: Fixed. Avid relinking vide tracks. Relink ONLY AUDIO tracks Fixed. Data update fr Cedar integratin Fixed. VS3 Algrithmix DeNiser & DeScratcher are supprted as f v10.0.7 HtFix knwn issue: They might display Dem until the prject is save & re-pen. Fixed Bugs in V10.0.6: GAIA-784: Fixed. Editing issue when inserting Audi in tracks (causes a verlapping bug) GAIA-783: Fixed. Changing all the strips t Pan if the buses are ff cnfuses the Bus trims GAIA-782: Fixed. Mixer Wizard's bus creatin always default t PAN (Nt Channel Ruter) GAIA-778: Fixed. saving as v9 legacy subgrups will crash n pening in v9 r v10 GAIA-777: Fixed. SACD Cutting Master Imprt place in timeline desn t wrk prperly GAIA-776: Fixed. Remved PMF frm the recrding frmats list f Backgrund recrder prperties page GAIA-755: Fixed. Ptential crash gruping and making selectins in timeline GAIA-749: Fixed. Playback in trimmer crash Pyramix v10 RC1 GAIA-742: Fixed. Media Manager Quick Exprt: DXD media t DSDIFF is brken GAIA-734: Fixed. Album Publishing: Include Trellis E Sigma Delta and SRC filter type setting GAIA-519: Fixed. Cannt Cmmunicate with VCube wrng errr message fr Pyramix prject with vide track GAIA-475: Fixed. Pyramix Vide: Editing Vide and Audi can extend vide selectin and can break audi edits GAIA-268: Fixed. Remve VS3 Check cmpnent frm Virtual Studi installer RAV-454: Fixed. Ptential BSOD/GSOD when discnnecting/recnnecting Hrus t the MassCre NIC card Fixed. Mixdwn: Channel mapping available up t 10 channels (instead f 8) t allw a channel mapping which matches Aur encder Fixed. DSD wavefrms are nt displayed cnsistently when mving DSD clips in the timeline Fixed Bugs in V10 RC1: GAIA-254 & 729: Fixed Pyramix Tlbar at times disappears r causes a crash. Nte: We d nt recmmend users t mve Pyramix tlbar items during playback since it's freezing the all applicatin UI and may lead t an applicatin crash. GAIA-717: Fixed. Imprt DDP can crash Pyramix v10 and randm crashes
GAIA-716: Fixed. Pyramix crash at times when imprting sme AAF files GAIA-714: Fixed. Pyramix Vide: Drag and drp V12 track t timeline nt accurate GAIA-538: Fixed. Save special as v9 nt wrking adequately GAIA-535: Fixed. Incnsistent Vide Overlays settings GAIA-532: Fixed. Pyramix behavir when user imprts vide file but has n key fr the vide cdec GAIA-527: Fixed. Optimize Vide frame cmpsitin GAIA-526: Fixed. Handle vide transitin (Fade, Xfade) GAIA-523: Fixed. Faders Vide timeline files appear ffline GAIA-520: Fixed. Pyramix Imprt Vide Clips: shuld filter nn supprted file types GAIA-518: Fixed. Pyramix vide: thumbnails generatin can smetimes cause MassCre peaks in playback, generatin must nw be dne afterwards frm the Vide track cntext menu GAIA-517: Fixed. Pyramix Vide: Slwdwn when mving Vide files in timeline GAIA-515: Fixed. Pyramix Vide: causing system timeut Hang when ging t the Mixer Ruting Page and ding ruting. GAIA-512: Fixed. Autmatin: Bus are a times turned ON when they shuld stay Off GAIA-508: Fixed. Digital Release shuld nt check 16bit if Mixer dither is active GAIA-505: Fixed. Mixer: Mving VCA causing strip VCA assignments cnfusin GAIA-504: Fixed. Vide (ffline) in Timeline creating timeuts and slwdwn GAIA-503: Fixed. Pyramix tracks: Missing Strips input cnnectins when Mixer's AG r SG are placed befre the end f the strips GAIA-502: Fixed. Database ptential crruptin "Failed t create empty dcument." Cannt pen prject (unless cleaning database) GAIA-499: Fixed. VST Hst reprts nn realtime status t late t allw plug-ins reprt their crrect ffline latency befre prcess starts (e.g. VST such as Equilibrium) GAIA-498: Fixed. ADR Cuntdwn Wipe setting updated GAIA-496: Fixed. Mixer Delay Cmpensatin issue when using AG t MG t Master GAIA-489: Fixed. Imprt Vide des nt respect the "Aut-Grup Aligned Clips" tick bx GAIA-487: Fixed. Object Buses Brken GAIA-485: Fixed. VST Effects Editr's prgram list drp dwn des nt adjust its width t fit lng prgram names GAIA-484: Fixed. Final Check Bus selectin name and channel labels are nt always crrectly initialized upn prject pening r Pyramix startup GAIA-481: Fixed. Handle delay cmpensatin fr Audi/Graphics/Vide GAIA-477: Fixed. Mixer: Sme prject can Crash when mving Strips/Tracks GAIA-476: Fixed. Pyramix Vide: Aut-Ripple can delete selecting range withut asking GAIA-473: Fixed. Vide UI nt n the frame when using Cpy / Paste GAIA-470: Fixed. Vide Playback: When perfrmance cannt be achieved drps are indicated GAIA-465: Fixed. MT ASIO bridge crashing GAIA-460: Fixed. Final check gets the wrng track rder in the 5.1 bus if the bus track rder is NOT LCRLsRsLfe. GAIA-459: Fixed. Trimmer view shuld nt be in full display GAIA-457: Fixed. Mixer: Un-Mute ptin will reset the sl nes GAIA-456: Fixed. Digital Release generatin: added check and warning if channel types dn't match the MTFF standards GAIA-454: Fixed. Pyramix crash randm when switching frm ne ADR lp t anther GAIA-453: Fixed. Pyramix Vide: ptential Black Vide frame displayed when trimming GAIA-451: Fixed. Album Publishing des nt embed artwrk fr CD and Digital Release in Pyramix GAIA-447: Fixed. Pyramix Vide: Offline Vide track causing slwdwn (pen settings ALT+G) GAIA-445: Fixed. EUCON2 security issue causing unknwn prtcl errr GAIA-433: Fixed. Mixer VCA reset bus will raise strips t maximum level GAIA-430: Fixed. Pyramix Vide in Timeline nt Delay Cmpensated when plugins requiring a delay are inserted in the Mixer GAIA-429: Fixed. Ludness analysis during One file per bus Mixdwn is nt wrking when utput frmat is nt PMF GAIA-428: Fixed. Vide in Timeline: Aut-Ripple nt wrking. GAIA-427: Fixed. Crash in sme timeline editing GAIA-425: Fixed. Bus Autmatin cmpnents lst when cnverting a Legacy Bus t a New General Bus GAIA-424: Fixed. MassCre in AES67 (48smpl) generating multiple glitches GAIA-423: Fixed. DSD cnverter crash with sme files (track mapping)
GAIA-419: Fixed. Pyramix gt Midi timecde messages are nt crrectly decded (causing Timecde jumps) GAIA-417: Fixed. Pyramix: Vide in timeline TC verlay has t be Timeline TC psitin, nt the vide duratin. GAIA-413: Fixed. Ovatin installer desn t allw Pyramix t install crrectly when perfrming an update GAIA-355: Fixed. Pyramix Native n lnger Timecde Free run based GAIA-331: Fixed. New v10 Mixer presets, VS3 presets and default Mixer based n New General Buses GAIA-321: Fixed: Mixer: Add extra VST speaker Arrangements t address the whle range f Pyramix v10 speaker arrangements GAIA-380: Fixed. Pyramix Vide: Pad edits utside f frame bundaries with vide black GAIA-371: Fixed. RAVENNA ASIO has been extended t 128 IO RAV-386: Fixed. Easy-Cnnect nly cnfigure devices which are n the same netwrk as the Master (thers will be grayed ut) RAV-390: Fixed. Hrus/Hapi Lsing banks f channels n sme RAVENNA set up. GAIA-727: Fixed. Menu/Tlbars disappears when resizing screen GAIA-299: Fixed. Autmatin: Lsing VST Autmatin Link when remving r adding VST (MT6540) NAD-241: Fixed. MassCre n lnger install RTX64 TCP/IP stack nr "Windws Virtual RTX64 Ethernet" adapter SUP-10: Fixed. MXF XDCAMHD NTSC audi clicks RAV-441: Fixed. RAVENNA: Can perfrm interperability with Directuts interface (Mic t DA) using latest firmware Fixed. ADR: Wipes wrking in cuntdwn & lps Fixed Bugs in V10 Beta4: MT6539: Fixed. Mixer: VS3 presets lading des nt update Delay Cmpensatin MT6534: Fixed. Mixer Cnfigure: Adding strips can mve sme f them t the Bus sectin. MT6529: Fixed. Strip tl autmatin culd verlad in nn-real time Mixdwn MT6520: Fixed. Mixer & External Insert n v10 bus: Crash when changing the bus number f channels GAIA-400: Mixer: Cannt add VST frm the Mix page n Strips f mre than 8 channels. GAIA-393: Fixed. Changed Vide Clips default clr frm black t blue, in rder t read name and see selectin range GAIA-389: Fixed. Meter Bridge: Remve Errr when Mix Grup present in Mixer. GAIA-388: Fixed. Sme Mixer crash when ging t Mix page GAIA-386: Fixed. Crash in Pyramix. Quicktime Handler. Audi playback + wavefrm display x1 GAIA-382: Fixed. Pyramix: Labelling in ruting sectin f MS Strip says LR, shuld be CW GAIA-381: Fixed. MS Decding int New Buses des nt match ld bus levels GAIA-372: Fixed. Pyramix Vide: Black Magic Decklink verlays required a refresh GAIA-369: Fixed. Pyramix Vide: Fade Out nt applied GAIA-368: Fixed. Vide: Media manager desn't shw vide-nly media GAIA-365: Fixed. Thumbnails generatin is very slw, specially, in mp4. GAIA-364: Fixed. Pyramix Vide stability: fixing a randm crash GAIA-357: Fixed. Mixer Wizard: cannt create 64 IO Mixer in DSD 256 GAIA-352: Fixed. Updated Channel Mapping in Mixdwn GAIA-341: Fixed. Pyramix Vide: Thumbnail nt accurate n vide frame GAIA-336: Fixed. Mixer: Bad chabitatin f MixGrups and SubGrups leads t silent mixdwn when bth are present GAIA-332 Fixed. Album Publishing artwrk metadata: Sme JPG files are nt supprted, yu will be warned if Invalid file (preferred standard clr frmat is RGB 24 bit) GAIA-330: Fixed. Vide media can end up in the Audi tracks if dne frm Windws Explrer GAIA-329: Fixed. Mixer: Add Mix Grup pssibility t Mixdwn GAIA-324: Fixed. Delay Cmpensatin nt autmatically updating the settings (Mixer Delay) GAIA-323: Fixed. Lng flder path, hvering full path ppup is n lnger display 64bit-MT6250 GAIA-322: Fixed. When selecting single pan, the default fr Surce Size shuld be 100% GAIA-319: Fixed. Pyramix: Duplicating tracks can create duplicate Direct utput cnnectins GAIA-307-336: Fixed. Mnitr Panel: New Mix Grup nt audible n sme prjects GAIA-237: Fixed. Vide playback: Play/Stp des nt display the crrect Burn In Timecde