Satellite ommunications F Products Low Noise Amplifiers Frequency onverters Solid State Power Amplifiers Stephen D. Turner, PE., VP Engineering Paradise Datacom LL, State ollege, Pennsylvania, USA 0
, X, Ku, Ka Band LNAs Noise Temperature optimized in Satom Sub-Bands: 3.7 4.2 GHz 3.4 4.2 GHz 4.5 4.8 GHz 7.25-7.75 GHz 10.70 11.70 GHz 10.70 12.75 GHz 11.70 12.20 GHz 18.2 20.2 GHz 20.0 21.0 GHz +12 to +28 VD input Optional Transmit eject Filters Form Summary Alarm X Band LNA Ka Band LNA 1
edundant LNA Systems an be configured in 1:1 or 1:2 redundant configurations onfigured with, X, Ku, and Ka band LNAs Monitor and ontrol provided by the P2-1100 / P2-1200 edundant ontroller. Switch ontrol able can be supplied to interface controller to LNA plate assembly. 1:2 Band LNA System with edundant ontroller 2
edundant LNB edundant Systems Band 1:1 LNB System 1:2 Ku Band LNB Plate Assembly Standard 1:1 and 1:2 configurations similar to LNA redundant systems Used with P2-1100 or P2-1200 indoor redundant controllers P2 ontroller supports Band Switched LNBs External reference and Internal referenced LNBs supported LNBs are modified to provide a D urrent alarm for fault detection and automatic switching. 3
Ka Band LNA / LNB Systems 1:1 Ka Band LNB System 1:2 Ka Band LNB System with Filter Option 4
edundant System ontrollers P2-1100 1:1 ontroller P2-1200 1:2 ontroller 1 U high standard controller chassis Front panel mimic display of switch position S232/485 and Ethernet I/O capability Full functional Ethernet Port UDP, SNMP v1.0, & internal web browser Up to 1000 meters switch cable drive capacity Audible alarms Full compliment of discrete I/O including external alarm inputs New: Support for Band Switched LNBs & dumb BU edundant Systems 5
emovable Power Supplies edundant Power Supplies are Hot-Swap emovable from the rear panel 90-265 VA Input 6
vbu, VSAT L-Band Block Up onverters Output Power levels: 12 W Psat Ka Band now available -Band: 5.850-6.425 GHz ( 25W,50W, & 80W) X-Band: 7.90-8.40 GHz (10W, 25W, & 35W, & 80W) Ku Band: 14.00-14.50 GHz (10W, 16W, 25W, & 40W) Ka Band: 30-31 GHz (12W)
vbu Feature Set Built-in 1:1 edundancy ontrol High Stability Internal eference Option Auto detection and switchover to externally applied reference. Automatically phase lock to 5,10,20,25, and 50 MHz external reference. Wide range for input reference power : -10 to +5 dbm 20 db Gain Adjustment Legacy FSK and S485 Monitor and ontrol Standard Paradise Datacom Monitor and ontrol Ethernet based Monitor and ontrol including UDP, SNMP v1.0, and internal web browser 24, 48 VD operation or optional add-on A/D Power Supply 8
vbu A Power Supply 85-265 VA Input 48VD Output @ 500W maximum A Power Supply mounted to vbu A Power Supply can be mounted to vbu or remotely mounted 9
Fiber Optic Support Fiber Optic Transceiver Support now available on all outdoor SSPAs: ompact Outdoor, ompact Outdoor Jr., and vbu. 10
ubu Brick Style Up onverters onduction ooled Brick Package ideal for ManPack Applications, X, and Ku Band available in Output Power Levels from 10W & 20W 11
ack Mount onverters 70 MHz to L-Band Synthesized Up/Down onverters L-Band to,x, and Ku Band Block Up/Down onverters onfigure with redundant block up converters for use with phase combined HPA systems. 12
SSPA Products Indoor, ack Mount, SSPA Family Outdoor SSPA Product Family SSPA Systems edundant Phase ombined 13
Indoor SSPA Family 3U high chassis emovable Integral A/D Power Supply or optional n+1 external redundant power supply S,, & X Band to 600W Ku Band to 150W 4U high chassis Integral A/D Power Supply or Optional n+1 external redundant power supply S Band: to1000w & X Band: to 800W Ku Band: to 300W 7U high chassis Used only with external edundant Power Supply Output Power Levels: Band: 750W through 1.5 kw X Band: 600W through 1.5 kw Ku Band: 400W through 600W
Indoor (3U) SSPA hassis Extremely ompact 24 inch hassis depth 3U rack height Smallest, highest power density, Solid State Power Amplifier chassis developed to date! Available F Output Power levels: S Band to 600W Band to 600W X Band to 600W Ku Band to 150W 15
SSPA hassis Front Panel Layout On/Off Indicator Online Indicator in edundant System Fault Status Indicators 2 Line x 40 haracter Display Dedicated front panel buttons for: Main menu screen Local / emote selection TX Inhibit Menu navigation buttons and Entry selection Plug-in Power Supply Module Optional F Input Sample Port -10 dbc oupler Front Panel Air Intake emovable Fan Tray F Output Sample Port -40 dbc oupler 16
Modular hassis Architecture All SSPA hassis have removable fans and M& card. emovable front panel fan tray emovable front panel power supply assembly emovable rear panel fan tray emovable rear panel monitor and control card 17
hassis Monitor and ontrol Ethernet Port Link Port and Switch Port for Built-in 1:1 edundancy ontrol Parallel I/O Port for full compliment of Form relays for alarm & status outputs as well as opto-isolated inputs Program Port for field upgradeable flash firmware Main Serial Port for S 232 or S 485 serial I/O Local Serial Port for phase combined systems or remote control panel Hot Swappable Ethernet supports UDP, SNMP, and Internal Web Page 18
4U SSPA hassis Alarm Indicators Front Panel Display On/Off Switch Front panel air intake removable fan tray -40 dbc F Output Sample Port Internal A/D Power Supply Larger Thermal platform than 3U chassis 19
External Power Supply (option) Interconnection 4U SSPA hassis 1U edundant Power Supply Quick disconnect connector bulkhead for D Input No bus bars ompany onfidential 20
FMD FPD200P70 FMD FP D6836P70 Gai n Adjust A t t enuator Hitite HM 694LP4 Variable Gain Amplifier P re d istortion TriQuint EE Linearizer TGA2706 M P A 5585025F -16 30 14 30 34 Toshiba TG I 5 9 64-120L 10 44 dbm 40 dbm 40 dbm 36.5 36.5 36.5 36.5 Toshiba T G I 5 9 64-120L 9 Toshiba T G I 5 9 64-120L 9 Toshiba T GI 5 9 64-120L 9 Toshiba T G I 5 9 64-120L 9 4 5.5 dbm 4 5.5 dbm 4 5.5 dbm 4 5.5 dbm 4 1.5 dbm 41.5 dbm 4 1.5 dbm 41.5 dbm 7 7 7 7 48.5 48.5 48.5 48.5 44.5 44.5 44.5 44.5 Toshiba T G I 5 9 64-120L 6 Toshiba T GI 5 9 64-120L 6 Toshiba T GI 5 9 64-120L 6 Toshiba 50.8 50.5 50.5 T GI 5 9 64-120L 6 50.5-0.5 Microstrip -0.5 Microstrip 53.3 dbm 53.0-0.2-0.2 5 6.5 dbm -0.2 Wa ve g u i de ombiner -0.2 Wa ve g u i de ombiner 58.6 New High Power Density GaN based 4U hassis -0.2 62.0 dbm In Development: Unique dual base, high efficiency, heat sink design coupled with GaN technology results in the highest power density SSPA technology in the industry. esulting Power Levels: S-Band: 2 kw and X Band: 1.6 kw Ku Band: 800W Ka Band: 300W 21
7U Modular hassis SSPA Output Power Levels to: Band to 1.5 kw X Band to 1.5 kw Ku Band to 800W (4) Hot-swap removable SSPA modules 22
7U hassis emovable Subassemblies emovable Fans emovable SSPA Modules 23
Outdoor SSPA Family ompact Outdoor SSPA S Band to 500W Band to 400W X Band to 400W Ku Band to 250W ompact Outdoor Jr. & X Band 100W & 200W Ku Band 50W & 100W High Power Outdoor Package Kingpost mountable S Band to 1000W Band to 800W X Band to 800W Ku Band to 400W 24
ompact Outdoor Jr. Ojr. bridges the power levels between the vbu family and the standard O power levels. Ojr, is approximately ½ size of existing ompact Outdoor. F Output Power levels 100W-200W in & X Band; 100W Ku Band weight = 20 lbs! 25
S & Band Ojr Specifications 26
X & Ku Band Ojr Specifications 27
ompact Outdoor SSPA ompact Size: 10.0in x 19.5in. X 6.50in. (254mm x 495mm x 165mm) Very light weight: 36 lb. (16.4 kg.) Extremely obust Outdoor Operation -40 to +60 Operating ange Tested to -55 Universal Input Power Supply 90-265 VA input range, PF Variable Gain: 55 to 75 db, 0.1dB steps Output Power Detector Output Power Sample Port, -40 dbc Internal 1:1 edundant ontroller Large status LED Optional L-Band or Fiber Optic Input Serial or Parallel Monitor and ontrol (S232 / S485) Supplied with Windows based M& program Ethernet Interface Standard, UDP-SNMP-Web Browser 1 U emote ontrol Panel with Ethernet M& Auxiliary +15VD power port for LNB or Fiber Optic module 28
L Band Input with Integrated ZBU TM Paradise Datacom s ZBU has L Band up conversion features unique to the ompact Outdoor Amplifier. High stability 10 MHz internal reference Auto detection of external reference Locks to a variety of reference frequencies IFL based Monitor & ontrol using FSK Excellent Phase Noise Performance Seamless integration with Fiber Optics Seamless integration with LNB and L Band modem for full transceiver based applications ZBU L Band Block Up onverter Integrated into ompact Outdoor SSPA 29
ompact Outdoor SSPA obust design for high dust and high heat environments Extremely efficient forced convection thermal design with quick disconnect fan tray for maintenance of fans and heat sink assembly. Operating Temperature: -40 to +60 Altitude: up to 10,000 feet with no de-rating De-rate maximum operating temperature by 2 degrees/1,000 ft. beyond 10,000 feet. Shock- 50g p-p, 11msec pulses Vibration- 3g rms 30minute, 5Hz to 2000Hz operational. 30
DBS Band ompact Outdoor SSPA / SSPB Psat = 40W; 17.3 18.4 GHz 31
40W Ka Band SSPA ompact Outdoor DoD ertified with integral L Band Block Up onverter MIL-STD-188-164A 30.0 31.0 GHz Operation 25W Linear Output Power with integrated pre-distortion linearizer 32
207758A T1 2 20 209323-21 1 A1 Vg 12 13 19 4 5 22 N 11 3 6 14 10 2 7 15 Vd 18 1 8 23 9 16 Vd 25 17 24 26 2 1 0131-208598- U1 207767A JP2 2 1 4 3 6 5 8 7 10 9 2081 3 2A T15 20 15 7 21 T16 17 U2 2 3 10 22 1 U1 A4 TG A 4915 23 11 2 16 4 1 5 6 9 18 10 8 3 JP1 4 2 6 1 3 5 7 T2 T3 T4 T1 7 9 T5 T6 T7 T8 T9 T10 T11 T12 T13 T14 T15 T16 23 25 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 3 5 11 13 15 17 19 21 11 43 44 12 27 29 19 51 52 20 1 1 1 1 1 1 1 1 1 41 42 10 13 45 46 14 15 47 48 16 17 49 50 18 21 53 9 54 22 40 8 23 31 55 2 3 4 8 7 6 2 3 4 8 7 6 2 3 4 8 7 6 2 3 4 8 7 6 2 3 4 8 7 6 2 3 4 8 7 6 2 3 4 8 7 6 2 3 4 8 7 6 5 5 5 5 5 5 5 5 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 T T T T T T T T 1 1 1 1 1 1 1 1 4 4 4 4 4 4 4 5 GaN 4 5 5 GaN 4 5 5 GaN 4 5 5 GaN 4 5 5 GaN 4 5 5 GaN 4 5 5 GaN 4 5 4 5 GaN 4 5 3 3 3 3 3 3 3 3 T T T T T T T T 1 4 5 4 5 4 5 1 4 5 4 5 1 4 5 4 5 1 4 5 4 5 1 4 5 4 5 1 4 5 4 5 100W Ka Band SSPA Development POT 3 POT 1 POT 2 1 1 GaN GaN GaN GaN GaN GaN GaN 4 5 4 5 GaN 4 5 3 3 3 3 3 3 3 3 Q25 Link Power 58 57 VOLTAGE ONVETE +7V AND +28V INPUTS, +12V OUT. 210157 Q26 SEE 208462 NEW 24V BUSS BAS SLAVE PB 2 w/ -V converter 600mA Max. 300mA Max.? (Use this if master -V is overloaded) 206426 ABLE=L205601-1 207707 EV Industry s first 100W Ka Band GaN SSPA module in development an be packaged in the ompact Outdoor Enclosure 100W ompact Outdoor will produce 50W Linear Power 33
400W & X Band GaN Modules for the ompact Outdoor 400W X-Band GaN Module 34
250W Ku Band GaN Module for the ompact Outdoor SSPA 250W Ku Band GaN SSPA Module in production 35
GaN GaAs omparisons at Ku Band 125W GaAs Module in O P1=50 dbm ; Plinear=(P1-3dB)=47 dbm (50W) A Prime Input Power = 1250W 150W GaN Module in O Psat= 52.0 dbm; Plinear=(Psat-3dB) = 49 dbm (80W) A Prime Input Power = 700W Produces about the same linear power as the 250W (GaAs) Outdoor Package 36
GaN GaAs omparisons at X Band Highest Power available in GaAs is 250W P1=53 dbm; Plinear = P1 3dB= 50dBm (100W) A Prime Input Power = 1800W 400W GaN Module in ompact Outdoor Psat=56 dbm; Plinear = Psat 3dB= 53dBm (200W) A Prime Input Power = 1400W 37
S-Band O Specifications 38
& X Band O Specifications 39
Ku Band O Specifications 40
High Power Outdoor Package Highest Power Outdoor SSPA Product: 1000W S-Band 800W Band 800W X Band 400W Ku Band Local Interface Panel access inside cover Same display panel as Indoor SSPA hassis High Power Outdoor with access door open 41
New High Power Outdoor Package Development New High Power Outdoor Package Stripped down feature set more like ompact Outdoor SSPA Size ompatible with Wavestream High Power Outdoor Package designed around larger footprint SSPA module. Old NEMA Weatherproof Package 42
F Power Levels in New Outdoor Package Saturated Power Levels S-Band 600W, 800W, 1000W & X Band 500W, 600W, 800W Ku Band 300W, 400W Ka Band 200W Linear Power ½ of Saturated Power Levels Size slightly larger than the ompact Outdoor SSPA Weight < 75 lbs. 43
Large Footprint Module for New Outdoor Package 650 W, GaN X-Band Module with integral waveguide-spatial combiner 44
S & Band High Power Outdoor Specifications 45
X & Ku Band High Power Outdoor Specifications 46
Monitor and ontrol Options Hardware and Software Options for Monitor and ontrol of SSPA and BU Products emote ontrol Panel 1 U chassis an remotely control SSPA up to 4000 ft. (1000 m) mimics actual SSPA chassis front panel P2-1000-O emote ontrol Panel for the ompact Outdoor SSPA P2-1000-M emote ontrol Panel for the Indoor hassis SSPA Ethernet Port 47
SSPA Systems edundant Systems 1:1 edundant Systems 1:2 edundant Systems Phase ombined Systems 1:1 Phase ombined Systems 1:2 Phase ombined Systems Modular High Power Systems 48
Traditional 1:1 edundant Systems No additional edundancy ontroller required. 1:1 System with 4 U SSPA hassis 1:1 edundant System of 600W S Band High Power Outdoor SSPAs 1:1 System with ompact Outdoor SSPAs 49
1:1 edundant Plates for Ojr. On-line Amplifier edundancy Switch F Output F Input Maintenance Switch Maintenance Output -40 dbc Standby Amplifier 1:1 System edundant Plates with the Ojr. Package 50
Maintenance Switch ontroller FAULTS SUMMAY POS 1 OUTPUT Test Output #2 INPUT POS 2 OFFLINE OUTPUT POWE SUPPLY MAINTENANE SWITH Maintenance Switch HPA Output P = 65.9 dbm P = 63.1 dbm 51
Phase ombined Systems Traditional 1:1 and 1:2 Phase ombined SSPA Systems with 1U FP ontroller Amp 1 Amp 1 F Input F Input Amp 2 F Output F Output Standby Amp 2 Amp 3 1:1 Phase ombined System 1:2 Phase ombined System 52
2 kw -Band 1:1 Phase ombined System Phase ombined 1 kw Band (7 U) chassis N+1 edundant Power Supply for complete power supply redundancy Two Phase ombined 7U chassis can also operate as a single 8-module SSPA similar to the ModuMax system. 53
Modular Phase ombined Systems PowerMAX architecture is the premium approach to modular SSPA Systems. Ultimate Parallel System eliability Extremely High Output Power apability 54
PowerMAX Innovation in Modularity PowerMAX is the latest advancement in Modular SSPA Technology U.S. patent 8,189,338 B2 Systems can be configured in 4 module, 8 module, or 16 module systems. Systems configured with a variety of module power levels to custom fit your redundant power requirement. Systems are completely field scalable: Start out with 4 modules. Grow system to 8 modules and/or 16 modules over time. No need to return system to factory for upgrade. educes initial equipment investment cost. All active components are modular and hot swappable from the front or rear panels including: Power Supply Modules Fans SSPA Modules M& ard 55
F Soft-Fail edundancy Modular Amplifiers should be sized such that a failure of 1 module can be tolerated by the system power budget. This is known as n+1 redundancy. 4 Module System: loss of 1 module results in 2.4dB reduction in output power 8 Module System: loss of 1 module results in 1.2dB reduction in output power 16 Module System: loss of 1 module results in 0.6dB reduction in output power In all cases the system automatically adjusts its gain to maintain constant gain with the loss of one or more modules. 56
Efficient Power ombining Extremely efficient power combining is at the heart of the PowerMAX architecture. Advanced 3D Electromagnetic Modeling Techniques are employed to design near loss-less 4-way combiners. The easily assembled 4-way combiner makes it very convenient to add SSPA modules in groups of four. All Passive ombining & No Switching results in hitless operation. 57
Pure Parallel System Architecture System is designed to be Purely Parallel. Failure of a hassis or M& ard will have no impact on the system operation. Unlike some modular amplifiers, PowerMAX is fully redundant right down to the Monitor and ontrol functionality. The loss of a M& card will not interrupt system remote control. System remote control is available as S485 or Ethernet. 58
Simplicity of Operation The sophisticated system monitor and control allows the system to be operated as if it were a single chassis amplifier. Single chassis-like operation is maintained with remote control as well as local (front panel) operation. The system output power detection is measured in True rms watts or dbm. power meter accuracy. Most HPA systems today use diode (peak) power detectors that do not accurately measure multicarrier or modulated signals. PowerMAX reports the true aggregate output power regardless of the number of carriers and modulation schemes. 59
1.5 kw, Ku Band PowerMAX System (8) 250W Ku Band GaN Modules ombined to provide 1.5 kw saturated F Output Power 1.1 kw edundant (n-1 module) output power 60
Ku Band GaN PowerMAX Systems (8) 300W module {2 kw} system in Assembly and (8) 400W module {3 kw} system in Development 61
ustom Phase ombined Systems 5 10 kw S-Band System 4 kw X-Band System 62
5 kw S-Band GaN edundant System (2) 2.5 kw 10U S-Band GaN SSPA hassis per cabinet Phase ombine abinets for 10 kw Output Power 63
-12 dbm -0.5dB FPD7612P70-13 28 VD Input 2 dbm 15 Nominal 15 db Power onsumption: 500W per module FPD7612P70 FPD7612P70 P1dB=20 dbm P1dB=20 dbm -13 2 dbm 17 15 15 >50 db Small Signal Gain -0.5dB GH40010 16.5 14 30.5 dbm GH40120F 14 44.5 dbm 41.25 dbm -.25 db 41.25 dbm -.25 db 38.0 dbm 38.0 dbm 38.0 dbm 38.0 dbm Small Signal Gain = 25.25 db G H 21240F 28 VD Input Power onsumption: 2000W per module 1 3. 5A @ 28VD Pdis=378W P 3 =53 dbm 52.5dBm 41.0 12 44.25 dbm -0.25 db G H 21240F 1 3. 5A @ 28VD Pdis=378W 55.25 dbm 4 db BO -.25 db 37.0 dbm 35.0 F Input 34.5 dbm 47.5 dbm 12 -.25 db 13 Phase Adjust F Output Sample Module Status Light 28 VD Input F Input Phase Adjust F Output Sample Module Status Light M & vswr shutdown Power onsumption: 2000W per module 37.0 dbm M & 35.0 rms det -.25 db det/vswr shutdown board vswr shutdown Power onsumption: 2000W per module 28 VD Input F Input Phase Adjust F Output Sample Module Status Light 37.0 dbm M & vswr shutdown 28 VD Input Power onsumption: 2000W per module F Input Phase Adjust F Output Sample Module Status Light 37.0 dbm M & 35.0 35.0 vswr shutdown G H21240F 1 3. 5A @ 28VD Pdis=378W 4 db BO 47.5 dbm 44.25 dbm 12 12 rms det 41.0 13 34.5 dbm 12 rms det -.25 db det/vswr shutdown board G H 21240F 1 3. 5A @ 28VD 4 db BO 47.5 dbm 44.25 dbm -.25 db 41.0 G H 21240F 1 3. 5A @ 28VD Pdis=378W P 3 =53 dbm 12 12 12 rms det 13 34.5 dbm 12 rms det Pdis=378W -.25 db det/vswr shutdown board G H 21240F 1 3. 5A @ 28VD Pdis=378W 4 db BO 47.5 dbm -.25 db 12 12 12 52.5dBm G H21240F 13. 5A @ 28VD Pdis=378W P3=53 dbm rms det 13 34.5 dbm 12 rms det -.25 db det/vswr shutdown board -0.25 db -0.25 db 52.5dBm 55.25 dbm -.25 db 55.25 dbm -.25 db G H 21240F 13. 5A @ 28VD Pdis=378W P3=53 dbm 41.0 52.5dBm 12 44.25 dbm -0.25 db 55.25 dbm -.25 db 12 12 rms det -.25 db 58 dbm 58 dbm 58 dbm 58 dbm 28 VD Input 28 VD Input 28 VD Input 28 VD Input 2.5 kw S-Band Modular hassis Monitor and ontrol ard Set Monitor and ontrol F IN +Vin Status Panel Fan Board FAN FAN FAN FAN FAN FAN PreAmp FAN FAN FAN F OUT F OUT F OUT F OUT 28 VD INPUT (4) Linearized GaN modules phase combined 64
emovable 750W S-Band Modules emovable Fan Trays emovable SSPA Module emovable Front Panel 65
5 kw S-Band ombining Network ombining Network in abinet 8-way combiner network 66
Phase ombined 10 kw S-Band System System can be used as 1:1 edundant 5 kw cabinets or phase combined 10 kw transmitter. as described in the October 2012, Microwave Journal 67
4 kw X-Band PowerMAX Most aggressive SSPA system design to date Power Added Efficiency approaching 40% at X-Band!!! System Architecture is Hybrid PowerMAX 1:1 Phase ombined System designed for ultimate F soft-fail efficiency and Prime A input efficiency System can be operated as an 8-module, 4-module, or 2-module system. Highly customized system design made possible by the PowerMAX architecture. 68
2 1 3 4 2 4 24V GND 1 2 3 4 J43 +24V INPUT X+ X- TX- TX+ 5 GND 6 N 7 N 8 N 9 N SMA(M) SMA(M) (8) Module System Block Diagram Low Power - High/Med Power ontroller 3 PHASE 480VA INPUT 15KW 24VD SUPPLY #1 5 kw 5 kw 5 kw 3 PHASE 480VA INPUT 15KW 24VD SUPPLY #2 24VD POWE DISTIBUTION 5 kw 5 kw 5 kw J10 F SAMPLE INPUT W1 Linear High Power Mode HPA Set Li near Low Power Mode HPA Set J12-55 DB F OUTPUT SAMPLE (FONT PANEL) 2 1 3 J11-10 DB F INPUT SAMPLE (FONT PANEL) 4 F INPUT AT2 AT1 AT3 W3 W4 IN SP1 B A SW1 PA9 SP2 B A W17 B W16 A W18 D W14 PA7 PA6 PA8 PA4 W26 W25 W24 W15 W22 650 W HPA 1 650 W HPA 2 650 W HPA 3 650 W HPA 4 650 W HPA 5 200 W 200 W 200 W 200 W 200 W 3000 W 3000 W 3000 W 1 3 3000 W 1 2 4 3 + Output Pow er Detector J41EFLETED FSAMPLE IN J42 F S A M P LE OUT FWD/EF PO WE DETETO L210826-1 J 4 4 S 485 J40 FO WAD F S AMPLE IN 6000 W 2 SW1 3 1 4 Offline Output Sample -50 dbc 3000 W F OUTPUT W21 W13 PA3 HPA 6 650 W 3000 W IN B W12 PA2 W20 HPA 7 650 W 200 W 3000 W 200 W F Distribuition Box A W11 HPA 8 650 W 200 W 3000 W Maintenance Switch ontroller High/Med Power - Very High Power ontroller System can be operated in: 8 module, 4 module, or 2 module modes 69
X-Band PowerMAX System Maintenance Switch ontroller High / Med Power - Very High Power ontroller Low Power - High/Medium Power ontroller HPA 1 HPA 2 HPA 3 In Low Power Mode HPAs (1&2) are active. In High/Medium Power Mode, HPAs (1,2,3,&4) are active. HPA 4 F Distribution Box HPA 5 HPA 6 HPA 7 In Very High Power Mode all (8) HPAs are active HPA 8 Power Supply #1 Power Supply #2 70
Hybrid Passive / 1:1 Switched ombiner Arrays MAINTENANE SWITH OUTPUT FILTE DUAL OSSGUIDE (FOWAD / EFLETED POWE MONITO) LINEA / SATUATED MODE SWITH 4-WAY PASSIVE POWE OMBINE ABINET GOUND BA 71
What s oming? 20W DBS Band (17.3-18.4 GHz) ompact Outdoor omplete new family of S-Band GaN modules from 50W 500W for the ompact Outdoor SSPA 100W Ka Band ompact Outdoor / 200W Ka Band New Outdoor Package New High Power Outdoor Package: S Band: 600W 1000W & X Band: 500W, - 800W Ku Band: 300W,500W Ka Band: 200W PowerMAX architecture in Outdoor Systems 650W X-Band GaN SSPA hassis 4kW X-Band PowerMAX System New GaN offerings in the 4U chassis: 2 kw S Band 1.6 kw and X Band 800 W Ku Band 72