Bulletin 90 Table of Contents Selection Guide Description Page Bulletin 90....................................... Accessories....................................... 7 Specifications..................................... 0 Approximate Dimensions.............................. 9
Bulletin 90 0 Bulletin 90 Manual Interrupter 40A Interchangeable Trip Units Ranges to 40A Contactor Module 40A, 0kW @ 45V AC, Current Limiting Contact Structure Coordinated Protected Starter (Applicable in North America Only) Operating Handle Indicates ON, OFF and TRIPPED Visible Isolation Gap with Trip Unit Removed Short Circuit Trip Setting Dial Overload Trip Setting Dial Sealable Cover for Trip Setting Dials Operating Handle Can Be Padlocked OFF Type Coordination with Integrated and Coordinated Protected Starters TABLE OF CONTENTS Description Page Description Page Product Selection...................................... 3 Accessories........................................... 7 Description Bulletin 90 Modular Starter System is a family of modular components that are assembled into a series of high performance motor starters. These starters reduce machine or process down time by lessening or eliminating component damage caused by short circuit current. Specification........................................ 0 Approximate Dimensions............................... 9 Conformity to Standards: IEC 947-, 947-4-, 04-, 364 VDE 000, 006 Parts 0, 00, 03, 0660 Parts 0, 0, 04, 07 CSA C. No. 4 UL 508 UL Listed for Group Motor installation Approvals: CE CSA Certified UL Listed Your order must include: The of the manual interrupter, contactor module, trip unit, operating handle adapter, or operating shaft. The of any accessories required.
System Circuit Breaker (To IEC 947-) for Protection of Cables and Wiring ➊ Note: Not for use in North America. Bulletin 90 Product Selection Manual Interrupter 90-MN Trip Unit for System Protection 90-P00L Description ORDER Manual Interrupter 40A I e 690V. 90-MN ALSO ORDER Thermal Magnetic Trip Unit for System Protection (Short Circuit trip = 5 8.5 x I u ) Contactor Module ORDER or Current Limiter Module Schematic Symbol Adjustable Thermal Current Range (A Adjustable Magnetic Trip Current Range (A) 6 0 50 80 90-P00L 0 6 80 40 90-P60L 6 5 30 0 90-P50L 4 3 60 80 90-P30L 3 40 00 350 90-P400L 90-A40 90-CL = Circuit Breaker ➊ Contactor Module or Current Limiter Module 90-A40 or 90-CL A A 3 4 = Combination Circuit Breaker ➊ Voltage Suffix Code The as listed is incomplete. Select a Voltage Suffix Code from the table below to complete the Example: 90-A40 become 90-A40. Voltage 4V 0V 0V 08V 0V 40V 380V 45V 440V 480V 600V 50 Hz K D A N B B 60 Hz J D H A G B C DC Z ➊ The Bulletin 90 System Circuit Breaker and Combination Circuit Breaker cannot be utilized as a short circuit protective device in Canadian and U.S. applications. In order to be utilized as circuit breaker in Canadian and U.S. applications, the device would have to meet t he breaker requirements of CSA and UL respectively. The Bulletin 90 System Combination Circuit Breaker does not meet these requirements. Accessories Page 7 Specifications Page 0 Approximate Dimensions Page 9 3
Bulletin 90 Product Selection, Continued Manual Motor Starter and Protector ➊ Manual Interrupter 90-MN Trip Unit 90-P _ or Trip Unit 90-P _R Description ORDE Manual Interrupter 40 AMP I e 690 V U i 90-MN ALSO ORDER OR ALSO ORDE Trip Unit Trip Unit with Relay Contacts N.O. and N.C. Suitable for use with Bulletin 90-MN or Bulletin 90-CPS40D. Overload condition changes contact state. Usually wired to de-energize contactor coil on overload condition. Interrupter opens on short circuit only. Adjustable Thermal Current Range (A) Adjustable Magnetic Trip Current Range (A) 0.4 0.6 5 8 90-P006 0.6.0 8 4 90-P00.0.6 4 90-P06.6.4 0 35 90-P04.4 4 35 55 90-P040 4 6 50 80 90-P060 6 0 80 40 90-P00 0 6 30 90-P60 6 7 00 35 90-P50 4 3 75 4 90-P30 3 4 350 50 90-P400 0.4 0.6 5 8 90-P006R 0.6.0 8 4 90-P00R.0.6 4 90-P06R.6.4 0 35 90-P04R.4 4 35 55 90-P040R 4 6 50 80 90-P060R 6 0 80 40 90-P00R 0 6 30 90-P60R Note: This trip unit not compatible with 90 RC Remote Operators, 90 RT Shunt Trip, or 90 UV Undervoltage Trip Modules. Schematic without Relay Contacts: 6 7 00 35 90-P50R 4 3 75 4 90-P30R 3 4 350 50 90-P400R = Manual Motor Starter and Protector ➊ UL Listed Components The Bulletin 90 manual motor starter/protector is CSA Certified and UL Listed. Suitable for use on a circuit capable of delivering 4 ka RMS SYM/600V or 65 ka RMS SYM/480V when protected by fuses or circuit breaker selected in accordance with the U.S. National Electrical Code. 4
Bulletin 90 Product Selection, Continued Integrated Starter ➊ Manual Interrupter 90-MN Contactor Module 90-A40 Description ORDER Manual Interrupter 90-MN ORDER Contactor Module 90-A40 ALSO ORDER Trip Unit ➋ Adjustable Thermal Curren Range (A) Adjustable Magnetic Trip Current Range (A) 0.4 0.6 5 8 90-P006 0.6.0 8 4 90-P00.0.6 4 90-P06.6.4 0 35 90-P04.4 4 35 55 90-P040 4 6 50 80 90-P060 6 0 80 40 90-P00 0 6 30 0 90-P60 6 7 00 350 90-P50 4 3 75 45 90-P30 3 4 350 500 90-P400 Schematic without Relay Contacts: Trip Unit 90-P _ 3 A A 4 = Integrated Starter Voltage Suffix Code The as listed is incomplete. Select a Voltage Suffix Code from the table below to complete the Example: 90-A40 become 90-A40J. Voltage 4V 0V 0V 08V 0V 40V 380V 45V 440V 480V 600V 50 Hz K D A N B B 60 Hz J D H A G B C DC Z ➊ UL Listed Components The Bulletin 90 Integrated Starter is CSA Certified and UL Listed. Suitable for use on a circuit capable of delivering not more than 4,000A. RMS Symmetrical at 600V AC, or 65,000A. RMS Symmetrical at 480V AC when protected by fuses or circuit breaker selected in accordance with the requirements of the U.S. National Electrical Code. ➋ A Trip Unit with Relay Contacts ( N.O. and N.C.) may be ordered. Accessories Page 7 Specifications Page 0 Approximate Dimensions Page 9 5
Bulletin 90 Product Selection, Continued Coordinated Protected Starter North American Markets On y ➊ Meets CSA and UL Requirements for a Combination Starter. Coordinated Protected Starter Less Trip Unit 90-CPS40 Description ORDER Coordinated protected starter less trip uni 90-CPS40 ➋ OR ORDER Reversing coordinated protected starter less trip unit 90R-CPS40 ➋ ALSO ORDER Trip Unit ➌ Adjustable Thermal Curren Range (A) Adjustable Magnetic Trip Current Range (A) 0.4 0.6 5 8 90-P006 0.6.0 8 4 90-P00.0.6 4 90-P06.6.4 0 35 90-P04.4 4 35 55 90-P040 4 6 50 80 90-P060 6 0 80 40 90-P00 0 6 30 0 90-P60 6 7 00 350 90-P50 4 3 75 45 90-P30 3 4 350 500 90-P400 Trip Unit 90-P A A 3 4 = Coordinated Protected Starter Voltage Suffix Code The as listed is incomplete. Select a Voltage Suffix Code from the table below to complete the Example: 90-CPS40 becomes 90-CPS40. Voltage 4V 0V 0V 08V 0V 40V 380V 45V 440V 480V 600V 50 Hz K D A N B B 60 Hz J D H A G B C DC Z ➊ CSA Certified and UL Listed Suitable for use on a circuit capable of delivering 00,000 amperes RMS SYM at 40V, 65,000 amperes RMS SYM at 480V or 4,000 amperes RMS SYM at 600V. Note: Ratings above 40V are based on Power Systems as follows: 480Y/77V AC; 600Y/347V AC (up through 90-P50) to the line side of this starter. ➋ 60 Hz only. ➌ A Trip Unit with Relay Contacts ( N.O. and N.C.) may be ordered. Accessories Page 7 Specifications Page 0 Approximate Dimensions Page 9 6
Bulletin 90 Accessories Auxiliary Contacts ➊ 90-A 90-A- Manual Interrupter Mounting Configuration Pkg. Qty. Integrated Starte OR Coordinated Protected Starter N.O., N.C., Operate with interrupter N.O., N.C., Operate with interrupter N.O., N.C., Operate with interrupter N.O., N.C., Operate with interrupter N.O., N.C., Operate with interrupter; N.O., N.C., Operate with contactor 90-A 90-A 90-AC 90-AC 90-A- Contactor (when separately mounted) ➊ N.O., N.C 90-AC- 90-AC- Trip Indicating Contacts ➊ Mounting Configuration Pkg. Qty. Manual Interrupte N.O., N.C., Indicate short circuit; N.O., N.C., Indicate overload 90-T- Three Phase Commoning Link Description Pkg. Qty. For line side connection of adjacent manual interrupters. 00A. (Sufficient room between units for auxiliary contacts, shunt trip or undervoltage trip 90-L3 module is provided.) Three Phase Link Terminal (Not shown.) For use with commoning link above. 90-L ➊ N.O., N.C. internal auxiliary contacts furnished standard with the contactor module. 7
Bulletin 90 04 Accessories, Continued Modules/Adaptors Description Shunt Trip Module Trips manual interrupter from a remote location using voltage signal. Coils available (multi-voltage): 4 48V 50/60 Hz 4 60V DC 0 50V 50/60 Hz 0 50V DC 380 600V 50/60 Hz 380 600V DC Pkg. Qty. 90-RT048 90-RT50 90-RT600 Undervoltage Trip Module Trips manual interrupter on power loss (70 35 V). Prevents undesired restart upon power resumption. (Undervoltage protection) Coils available (multi-voltage): 4V 50/60 Hz 90-UV04 0V 50 Hz, 0V 60 Hz 90-UV0 0V 50 Hz, 40V 60 Hz 90-UV40 45/440V 50 Hz, 480V 60 Hz 90-UV480 500V 50 Hz, 600V 60 Hz 90-UV600 08V 60 Hz 90-UV08 380V 50 Hz 90-UV380 Remote Operator Module ➊ Operates manual interrupter from a remote location using a voltage signal. Provides ON, OFF, and RESET functions. Includes a lockout provision. 50,000 operations life. Signalled and powered at same voltage 0 0V AC/DC 90-RCE0 0 50V AC/DC 90-RCE30 380 45V AC 90-RCE400 440V AC 90-RCE440 Signalled at 4V AC or DC. Powered at separate voltages shown below. 4V AC/DC 48V AC/DC 0 0V AC/DC 0 40V AC/DC 380 45V AC 440V AC 90-RCS4 90-RCS48 90-RCS0 90-RCS30 90-RCS400 90-RCS440 Separate Mounting Base for Contactor Module Provides line side terminals and mounting provisions. Allows panel design flexibility by offering the option of side or separate mounting of the contactor. 90-N Amplifier Module For programmable controller interfacing. Input: 4V DC, 5mA 90-N3 48V DC, 0mA 90-N4 5V DC, 0mA 90-N5 Output: N.O. and N.C. contacts, A at 45V AC or 0.A at 40V DC-DC Adaptor Allows an integrated starter to be DIN rail mounted. 90-N ➊ The use of an auxiliary contact with the manual interrupter is recommended. 8
Coding Pin/Surge Suppressor Bulletin 90 Accessories, Continued Description Pkg. Qty. Coding Pin Inhibits insertion of the incorrect trip unit into the manual interrupter. 5 90-N7 Surge Suppressor Suitable for use with 0V contactor modules. 99-FSMA External Operating Handle for Enclosure Cover Mounting ➊ IP4 (Type ) IP66 (Type 3, 3R, 4, 4X & ) Color Color Black 90-HS Black 90-HS4 Red/Yellow 90-HSE Red/Yellow 90-HS4E Adapter and Operating Shaft Working Depth mm (inches Adapter Operating Shaft Minimum Maximu Operating Handle Adapter 90-SE- or When 90-N Mounting Plate Is Used 6 (6-/3) 75 (6-57/64) 90-SE ➋ 76 (6-5/6) 303 (-5/6) 90-SE 94R-R 305 () 497 (9-9/6) 90-SE 94R-R When 90-N Mounting Plate Is Not Used 5 (6 66 (6-7/3) 90-SE ➋ 67 (6-9/6 94 (-9/6) 90-SE 94R-R 95 (-5/8 488 (9-7/3) 90-SE 94R-R Adapter 90-SE Working Depth Operating Shaft ➊ Not compatible with use of Remote Operator Module. ➋ An operating shaft may be required depending on the working depth of the enclosure. Working depth is measured from the front of the enclosur to the panel on which the Bulletin 90 starter is mounted (see drawing). This depth determines if an adapter is required and whi ch adapter, o adapter and operating shaft, is to be used. Order an adapter and operating shaft as indicated in the table.. 9
Bulletin 90 Specifications Short-Circuit Switching Capacity The following information is not for use in Canadian and U.S. Applications. 90-MN Manual Interrupter 90-P Trip Unit 006 00 06 04 040 Adjustable Thermal Current (A 0.4 0.6 0.6.0.0.6.6.4.4 4.0 Adjustable Magnetic Trip Range (A) 5 8 8 4 4 0 35 35 55 Switching Capacity (ka) 90-MN 90-P switching capacity Icn P-/P- (ka with 90-A 40 contactor or 90-CL current limiter switching capacity Icn P-/P- (ka) 90-MN 90-P backup fuse am or gl required when available current Icc exceeds Icn with 90-A 40 or 90-CL backup fuse am or gl required when available current Icc exceeds Icn NR = Not Required 0/380/45V 50 H 440V 50 H 500V 50 H 660/690V 50 H 4.5/3 0/380/45V 50 H 440V 50 H 500V 50 H 660/690V 50 H 0/7.5 Backup Fuses (A) 0/380/45V 50 H NR NR NR NR NR 440V 50 H NR NR NR NR NR 500V 50 H NR NR NR NR NR 660/690V 50 H NR NR NR NR 63 0/380/45V 50 H NR NR NR NR NR 440V 50 H NR NR NR NR NR 500V 50 H NR NR NR NR NR 660/690V 50 H NR NR NR NR 80 0
Short-Circuit Switching Capacity, Continued The following information is not for use in Canadian and U.S. Applications. Bulletin 90 Specifications, Continued 90-MN Manual Interrupter 90-P Trip Unit 060 0 60 50 30 400 Adjustable Thermal Current (A) 4 6 6 0 0 6 6 7 4 3 3 4 Adjustable Magnetic Trip Range (A) 50 80 80 40 30 0 00 350 75 45 350 50 Switching Capacity (ka) 90-MN 90-P switching capacity Icn P-/P- (ka) with 90-A 40 contactor or 90-CL current limiter switching capacity Icn P-/P- (ka) 90-MN 90-P backup fuse am or gl required when available current Icc exceeds Icn with 90-A 40 or 90-CL backup fuse am or gl required when available current Icc exceeds Icn NR = Not Required 0/380/45V 50 Hz R/30 R/30 30/0 30/0 30/0 440V 50 Hz 0/7 0/7 0/7 0/7 0/7 500V 50 Hz 7/4.5 7/4.5 7/4.5 7/4.5 7/4.5 660/690V 50 Hz 4.5/3 4.5/3 4.5/3 4.5/3 4.5/3 4.5/3 0/380/45V 50 Hz 440V 50 Hz 500V 50 Hz 660/690V 50 Hz 0/7.5 0/7.5 0/7.5 0/7.5 0/7.5 0/7.5 Backup Fuses (A) 0/380/45V 50 Hz NR NR NR 60 60 60 440V 50 Hz NR 80 00 5 60 60 500V 50 Hz NR 80 00 5 60 60 660/690V 50 Hz 80 80 00 5 60 60 0/380/45V 50 Hz NR NR NR NR NR NR 440V 50 Hz NR NR NR NR NR NR 500V 50 Hz NR NR NR NR NR NR 660/690V 50 Hz 80 0 00 60 60 60
Bulletin 90 Specifications, Continued Short-Circuit Protection Requirements North American Market Only 90-MN Manual Interrupter 90-P Trip Unit 00 00 06 04 040 Adjustable Thermal Curren A 0.4 0.6 0.6.0.0.6.6.4.4 4.0 Adjustable Magnetic Trip Range A 5 8 8 4 4 0 35 35 55 30V/60 Hz HP / Max. 3 horsepower ➊ 460V/60 Hz HP / 3/4 575V/60 Hz HP / -/ 3 Single Motor Application Max. backup protection for 90-M manual interrupter 90-P trip unit Max. backup protection for 90-M manual interrupter 90-P trip unit 90-A40* contactor module Max. backup protection for 90- CPS40* combination starter plus 90-P trip unit Max. Fuse Max. Circuit Breaker Size Max. Fuse Max. Circuit Breaker Size A A A A Per U.S. N.E.C. Table 430-5 (usually 75% motor full load current for time delay fuse) Per U.S. N.E.C. Table 430-5 (usually 50% motor full load current for inverse time circuit breaker Per U.S. N.E.C. Table 430-5 (usually 75% motor full load current for time delay fuse) Per U.S. N.E.C. Table 430-5 (usually 50% motor full load current for inverse time circuit breaker Max. Fuse A None required Max. Circuit Breaker A None required Group Motor Applications Max. backup protection for 90-MN manual interrupter 90-P trip unit Max. backup protection for 90-MN manual interrupter 90-P trip unit 90-A40* contactor module Max. Fuse A 500 500 500 500 500 Max. Circuit Breaker Size A 500 500 500 500 500 Max. Fuse A 000 000 000 000 000 Max. Circuit Breaker Size A 000 000 000 000 000 ➊ Horsepower ratings are shown as a reference only. Selection should be based on motor full load current: For motors with service factor of.5 or greater, use motor nameplate full load current to select the trip unit with the proper thermal current range. EXAMPLE: Motor FLC = 7A, SF =.5. Select Trip Unit 90-P50 which has a thermal current range of 6-5A. For motors with service factor less than.5: Multiply motor nameplate full load current by 0.9 and use the resulting figure to select the trip unit with the prope thermal current range. EXAMPLE: Motor FLC = 7A, SF =.0. 7A x 0.9 = 5.3A. Select Trip Unit 90-P60 which has a thermal current range of 0-6A.
Short-Circuit Protection Requirements, Continued North American Market Only Bulletin 90 Specifications, Continued 90-MN Manual Interrupter 90-P Trip Unit 060 00 60 50 30 400 Adjustable Thermal Current A 4.0 6.0 6 0 0 6 6 7 4 3 3 4 Adjustable Magnetic Trip Range A 50 80 80 40 30 0 00 350 75 45 350 500 Max. 3 horsepower Single Motor Application, Continued 30V/60 Hz HP -/ 3 5 7-/ 0 5 460V/60 Hz HP 3 5 0 0 0 30 575V/60 Hz HP 5 7-/ 0 5 30 30 Max. backup protection for 90-MN manual interrupter 90-P trip unit Max. backup protection for 90-MN manual interrupter 90-P trip unit 90-A40* contactor module Max. backup protection for 90-CPS40* combination starter plus 90-P trip unit Max. Fus Max. Circuit Breaker Size Max. Fus Max. Circuit Breaker Size A A A A Per U.S. N.E.C. Table 430-5 (usually 75% motor full load current for time delay fuse) Per U.S. N.E.C. Table 430-5 (usually 50% motor full load current for inverse time circuit breaker Per U.S. N.E.C. Table 430-5 (usually 75% motor full load current for time delay fuse) Per U.S. N.E.C. Table 430-5 (usually 50% motor full load current for inverse time circuit breaker Max. Fus A None required Max. Circuit Breaker A None required Group Motor Applications, Continued Max. backup protection for 90-MN manual interrupter 90-P trip unit Max. backup protection for 90-MN manual interrupter 90-P trip unit 90-A40* contactor module Max. Fuse A 500 500 500 500 500 500 Max. Circuit Breaker Size A 500 500 500 500 500 500 Max. Fuse A 000 000 000 000 000 000 Max. Circuit Breaker Size A 000 000 000 000 000 000 3
Bulletin 90 Specifications, Continued Environmental Temperature Storage Open Enclosed Ambient temperature compensation (overload) 5 C 70 C 5 C 60 C 5 C 40 C 5 C 60 C Climatic Tests Damp heat to IEC 68 Pt. -30 Dry heat to IEC 68 part 0 85 C Altitude 3000 Electrical Ratings Main Contacts Rated Insulation Voltage U i 690V Uninterrupted Current I u 4A Frequency 50 60 H Heat Loss Manual motor starter Integrated 4 W starter or coordinated protected 3 W starter Electrical Life Maximum Switching Frequency Manual interrupter Contactor module (see curve page 5) Manual Interrupter Contactor Module (see curve page 5) Motor Voltage AC3 DC4 Short Circuit Switching Capacity See page 5 Contactor Module Operating Range Pick up Drop out Power Consumption Pick up Seal Duty Factor 00% Operating Times 9 30 ms 4 ms AC3 50000 ops at 0 kw AC3 000000 ops at 0 kw AC4 30000 ops at 5 kw 60 OPS/HR 690V AC Max. 30V DC Max. 85% 0% nameplate voltage 60% 40% nameplate voltage 90 VA 3 VA closing delay opening delay Making Capacity 400A cos φ = 0.35 cos ϕ = Breaking Capacity 400A cos φ = 0.35 30 690V AC Duty Thermal current I th = operating current I e open or enclosed 6-/3 400 Hz AC 3/AC 4 Duty Rated Operating Current Open or Enclosed Voltage AC 3 I e (A) AC 4 I e (A) 30V AC/50 Hz 40 30 45V AC/50 Hz 40 30 440V AC/50 Hz 40 30 500V AC/50 Hz 3 8 690V AC/50 Hz 5 Trip Unit Residual Error Less than 5% at 40 C, Less than 0% at 60 C Short Circuit Trip Tolerance ±0% Trip Unit for Motor Loads adjustable overload trip ranges 0.4 40A Adjustable short circuit trip range Phase loss sensitivity to IEC 9-8.5 4 I u Trip Unit for System Protection 5 adjustable overload trip ranges Adjustable short circuit range 6 40A 5 8.5 x I u 4
Electrical Ratings, Continued Contactor Module Life Load Curves for Squirrel-Cage Motors Bulletin 90 Specifications, Continued Operating characteristics Electrical characteristics Normal Switching Duty Starting: Stopping: Make: Break: Extreme Switching Duty From rest Operating characteristics Inching, plugging, reversin After attaining full running speed Up to 6x rated motor current x rated motor current Electrical characteristics Make: Break: Utilization category 99.9% AC-3 0.% AC-4 Utilization category 00% AC-4 6x rated motor current 6x rated motor current 380/45 AC3 380/45 AC 4 kw 330 kw 375 Rated output of three-phase motors 50...60 Hz 00 60 3 0 90 75 55 45 37 30 8.5 5 7.5 5.5 4 3..5. 0.8 0.55 Normal switching duty 0.0 0.0 0.04 0.06 0. 0. 0.4 0.6 3 4 5 6 8 0 Component lifespan (millions of operations) Rated output of three-phase motors 50...60 Hz 300 0 0 90 75 55 45 37 30 8.5 5 7.5 5.5 4 3..5. 0.8 0.55 Extreme switching duty, squirrel-cage motors 0.37 0.5 0.0 0.0 0.03 0.04 0.06 0. 0. 0.3 0.4 0.6 3 4 5 6 8 0 Component lifespan (millions of operations) Contactor Module Switching Frequency Curve Ops/h 9000 7000 6000 5000 4000 3000 000 500 000 800 600 500 400 300 AC3 AC4 00 50 00 0 0 0 30 40 50 60 70 80 90 00% % Rated Load 5
Bulletin 90 Specifications, Continued Electrical Ratings, Continued Manual Motor Starter and Protector Let-through curves I D [ka] 00 80 60 40 30 0 5 0 8 6 4 3.5 3/40 A 5 A U e = 45V.5 3 4 6 8 0 5 0 30 40 60 8000 I cc [ka] 6 A 0 A 6 A i dt [A s] 0 6 8 6 4 3.5 0 5 8 6 4 3.5 0 4 8 6 3/40 A 5 A U e = 45V 6 A 0 A 6 A 4.5 3 4 6 8 0 50 30 40 60 80 00 I cc ka ms Integrated Starter Manual Starter With Current Limiter Module Let-through curves I D [ka] 00 80 60 40 30 0 5 0 8 6 4 3 3/40 A 5A 6 A 0 A 6 A i dt [A s] 0 6 8 6 4 3.5 0 5 8 6 4 3.5 3/40 A 5 A 6 A 0 A 6 A.5 U e = 45V.5 3 4 6 8 0 5 0 30 40 60 8000 I cc [ka] 0 4 8 6 U e = 45V 4.5 3 4 6 8 0 50 30 40 60 80 00 I cc ka ms Trip Curves Motor Protection 90-P System protection 90-P L Minutes Seconds h 0 0 5 40 0 0 5 Minutes Seconds h 0 0 5 40 0 0 5 00 00 Milliseconds 50 0 Milliseconds 50 0 5.5 3 4 6 8 0 5 0 30 x rated current 5.5 3 4 6 8 0 5 0 30 x rated current 6
Mechanical Ratings Impact Resistance Mechanical Life 0 m Manual interrupter Contactor module Manual motor starter Installed Position Integrated starter Coordinated protected starter Degree of Protection IP0 VDE 006 Part 00 Terminal Capacities Power terminals conducto Power terminals conducto Control/accessory terminals or conductor Manual motor starter Integrated starter Coordinated protected starter 00000 ops 5000000 ops No restrictions Within 30 of vertical plane Within 30 of vertical plane Bulletin 90 30 G 8 G 8 G Specifications, Continued Solid or stranded.0mm 6mm AWG 4 6 Stranded with ferrule.5mm 0mm AWG 4 6 Solid or stranded.0mm 6mm AWG 4 6 Stranded with ferrule.5mm 6mm AWG 4 6 Solid or stranded with ferrule 0.5mm.5mm AWG 8 4 Approximate Shipping Weights Cat No. kg (lb) Manual Interrupter 90-MN 0.450 (.00) Trip Unit 90-P 0.8 (0.48) Contactor Module 90-A40 0.850 (.87) Auxiliary Contacts 90-A 90-A 90-AC/ 90-A/ 90-AC 90-AC 0.087 (0.9) 0.0 (0.) 0.094 (0.) 0.80 (0.40) 0.80 (0.40) 0.80 (0.40) Trip Indicating Contacts 90-T/ 0.04 (0.09) Amplifier Modul 90-N3, N4, N5 0.085 (0.9) Remote Operator 90-RC 0.5 (.0) Undervoltage Trip 90-UV 0.88 (0.4) Shunt Trip 90-RT 0.88 (0.4) Current Limiter Module 90-CL 0.5 (.5) Separate Mounting Base 90-N 0.47 (0.3) Adaptor Plate 90-N 0.45 (0.3) 7
Bulletin 90 Specifications, Continued Auxiliary Contacts Rated Insulation Voltage Rated Operating Current Electrical Life 500V AC 600V DC Separation from main contacts to VDE 006 Part 00 up to 690V AC AC II DC II 90-A 90-T/ 90-AC, AC, A/, AC/ 0/40V 50 Hz I e = 6A 380/45V 50 Hz I e = 3A 440/500V 50 Hz I e =.5A 4V I e = A 60V I e = 0.8A 0V I e = 0.7A 0V I e = 0.3A L/R < 00 ms A 50000 ops 5000 op 000000 ops 90-A, A 00000 ops Mechanical Life 90-T/ 0000 ops 90-AC, AC, A/, AC/ 5000000 ops Remote Operator Rated Insulation Voltage 500V AC 600V DC Operating Range AC or DC 85% 0% of nameplate voltage Power Consumption Make Time Break Time Reset Time To Off Switching Frequency Mechanical Life Undervoltage Trip Rated Insulation Voltage Drop Out Power Consumption AC DC L/R 50 m 50 m 0 m 60 ops/hr 50000 ops 700 VA for 5 ms 700 W for 5 ms 00 ms 690V AC 70% 35% of nameplate voltag Pick up Seal 00 m 5 VA AC 3 VA AC 3 W DC 3 W DC Drop Out Delay Shunt Trip Operating Range AC or DC 70% 0% of nameplate voltage Power Consumption Pick up Seal 5 VA AC 3 VA AC 3 W DC 3 W DC Amplifier Module Rated Insulation Voltage 45V AC Mechanical Life 0000000 ops Operating Range 85% 0% of nameplate voltage Duty Factor 00% Uninterrupted Current 6A Input 4V 5 ma DC 48V 0 ma DC 5V 0 ma DC Output Max. 45V AC Max. 40V DC AC DC AC A DC 0.A 8
Manual Motor Starter/Protector Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes. Bulletin 90 Approximate Dimensions M 4 3 (/8) 4.5 39.5 (3/6) (-9/6) 8 (4-/3) 09 (4-9/64) 05 (4-/8) > 83 (3-9/3) > 05 (4-/8) 68 (-/6) 5 (9/3) 45 (-49/64) 9 (3/4) 38 (-/) 6.5 (-7/6) 7.5 (-5/3) 8 6.5 36 8 (/6) (-7/6) (-3/3) (/6) 90_A 90-MN With 90-P 90-RC 90-UV 90-RT 8 (5/6) Auxiliary Contacts Trip Indicating Contacts 8 (3/3) M B M B 05 (4-/8) 38 (-/) 68 (-/6) 45 (-49/64) 90-T/ 3.5 (-6/64) 8 (3/3) 8 (3/3) 90-A 90-A 44 (-47/64) 77 (3-/3) 9
Bulletin 90 Approximate Dimensions, Continued Integrated Starter Coordinated Protected Starter Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes. 7.5 (-5/3) 9 (3/4) M4 8.5 (/64) 4.5 39.5 (/64) (-35/64) 09 (4-9/64) 8 (4-/3) (7/6) 90-N 8 (5/6) 90 T/ 68 04 (8-/3) > 5 (9/3) 90 (7-3/64) 90-RC_ 90-UV 90-RT 04 (8-/3) 5 (4-59/64) 6. (5/64) 0 (5/64) 5 (9/3) 8.5 (3/3) 90-A_C 90-A/ 38 (-/) 6.5 (-7/6) 46.4 (-53/64).4 (4-5/64) 0.4 (4-47/64) 35.9 (5-3/64) 45.9 (5-47/64) 50.9 (5-9/3) 7 R E 74 C D A U T O H A N D 05 (4-/8) 05 (4-/8) NO 33 34 Control A0 A40 B0 C D 36 (-7/64) 45 (-49/64) 09 (4-9/64) 8 (4-/3) Remote Operator 90-RCS, RCE 8 (3/3) Undervoltage Trip 90-UV 44 (-47/64) 09 (4-9/64) 3 (4-9/64) Shunt Trip 90-RT 0
Contactor Module Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes. Bulletin 90 Approximate Dimensions, Continued 38 (-/) 9 (3/4) 53 (-7/64) 37 (-/) 03.5 (4-5/64) 85 (3-3/64) 00 (3-5/6) 5 (4-9/3) 9 (3/4) 38 (-/) 6.5 (-5/3) 44 (-47/64) 09 (4-9/64).8 (55/64) (7/6) 3 65.5 (/8) (-37/64) 77 (3-/3) Contactor Module 90-A4O Current Limiter Module Cat No. 90-CL Separate Mounting Base 90-N 43 3.5 (57/64) M B M B M B M B 90 (7-3/64) 53 (6-/64) 0.5 (4-3/64) 98 (3-55/64) 44 CS-TE 75 (-6/64) 58 (-9/3) 3 8 (3/3) 90-AC 8 (3/3) 90-A/ 8 (3/3) 90-AC Auxiliary Contacts 44 (-47/64) 77 (3-/3) 6 (5/64) Amplifier Module 90-N3, N4, N5 M4 x
Back Cover Publication 90-SG00A-US-P - May 000 000 Rockwell International Corporation. Printed in the U.S.A.