FTS84/8 Feature Application Field Capable of temperature compensation and linear adjustment Double line character : air velocity & temperature Switch for physical quantity:[m/s] [ft/s] [km/h] [mph] [knot] RS-48 Communication interface, Modbus RTU protocol Configuration measuring range/analog output/ station number by dip switch or RS-48 Monitor gas and flow for industrial process Compressed air consumption measurement HAC, building, factory, Clean room, hospital Semiconductor, electronics, paper, iron and steel, food, Pharmaceutical, biotechnology industry Off SET function by bottom or RS-48 Programmable softeware : DATA LOGGER, record, and chart analysis EYC FTS84/8 P/6 ERSION : 06/07/0
Input input type of Air elocity input type of Temperature m/s ; m/s ; m/s ; 0 m/s;0 m/s;40 m/s ; 60 m/s PT 000, 0 ~ 80 Electrical power supply current consumption overvoltage protection 8~3DC & ~30AC DC 8:300,4:00 AC :30,4:80 DC:< 4 Output output 0~0 / 4~0 / electrical connection AC:< 40 M connector 0~ DC / 0~ DC / 0~0 DC default output signal connection out : air velocity;out : temp. : 0... 80 3-wire Installation installation duct / remote accuracy air velocity : ± 3% F.S. ; temp. : ± 0.3 way to fix / PT outside thread load resistance (current output) 00Ω load resistance (voltage output) response time angular dependence display type 0KΩ reach 90% of ultimate value within 3 sec. 3% of measuring value ( when the angle < 0 ) LCD Module with back light Protection protect degree electric protection IP 6 polarity protection over-voltage short circuit display range upon request, one decimal place double line character (up : velocity & down : temp.) Certification Certification CE height of character.6mm Environment media measured measured Medium Temperature working Temperature environment Humidity storage temperature air 0 ~ 80 working 0 ~ 0 working 9 %RH ( non-cond.) -0 ~ +60 Material case probe filter cable option weight PC fire-proof class ( UL94- ) SUS304 POM PTFE ( FTS8 ) SUS Fitting thread / SUS Flange type FTS84 : 380g;404g(display) / FTS8 : 39g;4g(display) proof pressure 0bar Ordering code ---------------> Installation Range Output supply Modbus Cable ( for remote type ) Option FTS 8-40 - M Ordering Item Installation code Range code Output code code Modbus code Cable code Option code duct remote 84 8 m/s m/s m/s 0 m/s 0 m/s 40 m/s 60 m/s 0 0 0 0 0 40 60 4~0 0~0 0~0 0~ 0~ RS-48 6 7 8 9 8~3DC & ~30AC analogue RS-48 RS-48 & analogue 0 Q type - M (8P) metal connector or N type - M6 cable gland m cable (FTS8) m cable (FTS8) customize W cable gland M (4P) connector ( with m electrical cable ) M (8P) connector ( with m electrical cable ) display other request N M Q D W EYC FTS84/8 P/6 ERSION : 06/07/0
unit : mm M type (M-4PIN metal connector RS-48 or analogue N type (M cable gland) RS-48 or analogue M type (M-8PIN metal connector) RS-48+analogue N type (M6 cable gland) RS-48+analogue FTS84(duct) M metal connector or M6 cable gland 38mm 38mm option : Mx. cable gland 6mm 4.6mm 4mm 6mm 4.6mm 4mm Ø 3.8mm Ø 3.8mm 8.6mm 8.6mm Ø mm Ø mm N type (M6) or Q type (M, 8P) : RS-48+analogue M type (M, 4P) : RS-48 or analogue N type : RS-48 or analogue EYC FTS84/8 P3/6 ERSION : 06/07/0
WWW.EYC-TECH.COM FTS8( remote ) M metal connector or M6 cable gland 0mm 0mm Mx. cable gland gauge :.4mm length upon request gauge :.4mm length upon request 4mm 4mm 4mm 4mm metal connecter R/ metal connecter R/ Ø mm Ø mm N type (M6) or Q type (M, 8P) : RS-48+analogue M type (M, 4P) : RS-48 or analogue N type : RS-48 or analogue 4P terminal cc OUT GND OUT 8~3 DC & ~30 AC 4 3 brown black white blue OUT 8~3 DC & ~30 AC EYC FTS84/8 P4/6 ERSION : 06/07/0
WWW.EYC-TECH.COM P terminal Tx Rx black white brown 4 3 blue 8~3 DC & ~30 AC cc OUT OUT 8~3 DC & ~30 AC OUT brown black 7 white 3 blue 8 6 4 yellow green RS48 GND gray GND Tx Rx 8~3 DC & ~30 AC SCADA USB CR-800 USB to RS-48 Converter Device. PC. RS-48 to USB Converter 3. power supply 4. UI software option converter: CR-800 EYC free programmable software http:///download/download49.html HMI transmitter PLC EYC FTS84/8 P/6 ERSION : 06/07/0
ON ON RSN For FTS84 /8 products, the setting status of switch will be read by software while power on, and this reading action will not happen later on. Thus in order to read the switch status again by software, the user must to reboot again if re-setting the switch. The function of Switch_ ~ 8 only be effective while setting the switch_ as On. 3 4 6 7 8 Enable/disable Output type Measuring range Device ID. Switch Active / Deactivate : Set the switch as On/ Off. The Type for Analog Output: Analog output type for Out & Out STATUS ON OFF STATUS 0-0 4-0 switch Switch 3. Setting the Output Measuring Range : Set the maximum value for analog output (The output physical type must be Air Flow elocity ) Only switch wide to small range 4. Setting the Device ID : Set the slave device ID for Modbus RTU. Switch 3 Switch 4 Switch RANGE (m/s) Switch 6 Switch 7 Switch 8 Device ID 3 0 4 0 6 40 7 60 8 EYC FTS84/8 P6/6 ERSION : 06/07/0