Dedicated KVM switch and rackmunt screen technlgy User Manual 17 / 19 / 20 LCD NP717/NP819/NP920 Rackmunt Display Panel Optins : -SDI / MCS -AV / HDMI / Audi - Tuchscreen / DC pwer - MIL-type r lckable cnnectr Rg C >/ REACH i-tech Cmpany LLC TOLL FREE: (888) 483-2418 EMAIL: inf@itechlcd.cm WEB: www.itechlcd.cm
Legal Infrmatin First English printing, Octber 2002 Infrmatin in this dcument has been carefully checked fr accuracy; hwever, n guarantee is given t the crrectness f the cntents. The infrmatin in this dcument is subject t change withut ntice. We are nt liable fr any injury r lss that results frm the use f this equipment. Safety Instructins Please read all f these instructins carefully befre yu use the device. Save this manual fr future reference. Unplug equipment befre cleaning. Dn't use liquid r spray detergent; use a mist clth. Keep equipment away frm excessive humidity and heat. Preferably, keep it in an air-cnditined envirnment with temperatures nt exceeding 40 Celsius (104 Fahrenheit). When installing, place the equipment n a sturdy, level surface t prevent it frm accidentally falling and causing damage t ther equipment r injury t persns nearby. When the equipment is in an pen psitin, d nt cver, blck r in any way bstruct the gap between it and the pwer supply. Prper air cnvectin is necessary t keep it frm verheating. Arrange the equipment's pwer crd in such a way that thers wn't trip r fall ver it. If yu are using a pwer crd that didn't ship with the equipment, ensure that it is rated fr the vltage and current labeled n the equipment's electrical ratings label. The vltage rating n the crd shuld be higher than the ne listed n the equipment's ratings label. Observe all precautins and warnings attached t the equipment. If yu dn't intend n using the equipment fr a lng time, discnnect it frm the pwer utlet t prevent being damaged by transient ver-vltage. Keep all liquids away frm the equipment t minimize the risk f accidental spillage. Liquid spilled n t the pwer supply r n ther hardware may cause damage, fire r electrical shck. Only qualified service persnnel shuld pen the chassis. Opening it yurself culd damage the equipment and invalidate its warranty. If any part f the equipment becmes damaged r stps functining, have it checked by qualified service persnnel. What the warranty des nt cver Any prduct, n which the serial number has been defaced, mdified r remved. Damage, deteriratin r malfunctin resulting frm: D Accident, misuse, neglect, fire, water, lightning, r ther acts f nature, unauthrized prduct mdificatin, r failure t fllw instructins supplied with the prduct. Repair r attempted repair by anyne nt authrized by us. Any damage f the prduct due t shipment. Remval r installatin f the prduct. Causes external t the prduct, such as electric pwer fluctuatin r failure. Use f supplies r parts nt meeting ur specificatins. Nrmal wear and tear. Any ther causes which des nt relate t a prduct defect. Remval, installatin, and set-up service charges. Regulatry Ntices Federal Cmmunicatins Cmmissin (FCC) This equipment has been tested and fund t cmply with the limits fr a Class B digital device, pursuant t Part 15 f the FCC rules. These limits are designed t prvide reasnable prtectin against harmful interference in a residential installatin. Any changes r mdificatins made t this equipment may vid the user's authrity t perate this equipment. This equipment generates, uses, and can radiate radi frequency energy and, if nt installed and used in accrdance with the instructins, may cause harmful interference t radi cmmunicatins. Hwever, there is n guarantee that interference will nt ccur in a particular installatin. If this equipment des cause harmful interference t radi r televisin receptin, which can be determined by turning the equipment ff and n, the user is encuraged t try t crrect the interference by ne r mre f the fllwing measures: Re-psitin r relcate the receiving antenna. Increase the separatin between the equipment and receiver. Cnnect the equipment int an utlet n a circuit different frm that t which the receiver is cnnected.
Cntents < Part. 1 > NP717/NP819/NP920 1.1 Package Cntent 1.2 Structure Diagram & Dimensin 1.3 Installatin P.1 P.1 P.5 < Part. 2 > Specificatins / OSD / Remte Cntrller 2.1 Prduct Specificatins P6 2.2 On-screen Display Operatin (OSD) P10 < Part. 3 > Optins 3.1 3G / HD / SD-SDI Bradcast-grade input (except RP-717 ) P.12 3.2 MCS Multi-display cntrl slutin P. 13 3.3 AV2.2D Upgrade : DVI-D + VGA + BNC + S-Vide + Audi P.14 3.4 AV2.2H Upgrade : HDMI + VGA + BNC + S-Vide + Audi P.14 3.5 AV3.0 Upgrade: P. 15 DVI-D + VGA+ HDMI + BNC + S-Vide + Audi P16 3.6 17" /19" Tuchscreen : Resistive, Capacitive P. 17 3.7 20" Tuchscreen: Resistive P.18 3.8 48V, 24V r 12VDC pwer P. 19
Befre Installatin It is very imprtant t munt the equipment in a suitable cabinet r n a stable surface. Make sure the place has a gd ventilatin, is ut f direct sunlight, away frm surces f excessive dust, dirt, heat, water, misture and vibratin. Unpacking The equipment cmes with the standard parts shwn in package cntent. Check and make sure they are included and in gd cnditin. If anything is missing, r damaged, cntact the supplier immediately. Hw T Clean Yur LCD Mnitr 4k Cautin : T avid the risk f electric shck, make sure yur hands are dry befre unplugging yur mnitr frm r plugging yur mnitr int an electrical utlet. When yu clean yur mnitr, d nt press dwn n the LCD screen. Pressing dwn n the screen can scratch r damage yur display. Pressure damage is nt cvered under warranty. Use nly cleansers made specifically fr cleaning mnitrs and mnitr screens. Cleansers nt made t clean mnitrs and mnitr screens can scratch the LCD display r strip ff the finish. D nt spray any kind f liquid directly nt the screen r case f yur mnitr. Spraying liquids directly nt the screen r case can cause damage which is nt cvered under warranty. D nt use paper twels r abrasive pads t clean yur mnitr. Using an abrasive pad r any wd based paper prduct such as paper twels can scratch yur LCD screen. Cleaning Yur Mnitr T clean yur LCD safely, please fllw these steps : Discnnect the pwer crd. Gently wipe the surface using a clean, dry micrfiber clth. Use as little pressure as pssible. Cleaning Tugh Marks and Smudges T remve tugh marks and smudges, please fllw these steps : Discnnect the pwer crd. Spray a small amunt f nn-abrasive cleanser n a micrfiber clth. ^^ Cautin : D nt spray r apply any liquids directly nt the mnitr. Always apply the slutin t yur * micrfiber clth first, nt directly n the parts yu are cleaning. Gently wipe the surface. Use as little pressure as pssible. Wait until yur mnitr is cmpletely dry befre plugging it in and pwering it up.
< Part 1 > < 1.1 > Package Cntent NP717/NP819/NP920 6ft VGA cable X 1 Pwer adapter X 1 Pwer crd X 1 < 1.2 > Structure Diagram Frnt view NP717 NP819 If c «e A V A Nl P920 a a **** «II II A %9 i A 1 ' Rear view Pwer adapter 0 LCD panel LCD membrane Audi speaker Pwer adapter basket Pwer crd DVI-D C Basic I/O AV2.2D upgrade AV2.2H upgrade AV3.0 upgrade Optins Audi ut - in - in Vide PC DVI-D + VGA Pwer BNC S-Vide VGA cjp3fi DVI-D + VGA + BNC + S-Vide + audi HDMI + VGA + BNC + S-Vide + audi HDMI + DVI-D + VGA + BNC + S-Vide + audi USB fr tuchscreen & DC pwer SDI (AV3.0 upgrade required ) HDMI P.1
< 1.2 > Dimensin - NP717 Frnt View Side View NP717 R OJ II A V < > in CO OJ CO A 340 II II II II 463 480 -^ ^- Bttm View UNIT: mm 1mm = 0.03937 inch 480 O Q O J fe 440 Mdel Prduct Dimensin (W x D x H) Packing Dimensin (W x D x H) Net Weight Grss Weight NP717 480x54.2x310 mm 18.9x2.1 x12.2 inch 529 x124 x495 mm 20.8x4.9x19.5 inch 6.1kg 13.4 lbs 8.2 kg 18 lbs P.2
< 1.2 > Dimensin - NP819 Frnt View Side View c NP819 CO e > 00 in CO CO ON c II 379!!c OJ 463 480 5 Bttm View UNIT: mm 1mm = 0.03937 inch 480 C2^ O J 440,6 fe CO CO in Mdel Prduct Dimensin (W x D x H) Packing Dimensin (W x D x H) Net Weight Grss Weight NP819 480x53.3x354.8 mm 18.9x2.1 x 14 inch 539 x129 x529 mm 21.2x5.1 x20.8 inch 5.7 kg 12.5 lbs 8 kg 17.6 lbs P. 3
< 1.2 > Dimensin - NP920 Frnt View Side View» i O NP920 CO CXJ * i 0^ CO O 411 S5 / A v < > a *» 6 / ~^ 463 480 Bttm View UNIT: mm 1mm = 0.03937 inch 480 «OP O # O J lb 445 Mdel Prduct Dimensin (W x D x H) Packing Dimensin (W x D x H) Net Weight Grss Weight NP920 480x63.5x399 mm 18.9x2.5x15.7inch 583 x124 x529 mm 23x4.9x20.8 inch 8.4 kg 18.5 lbs 10.7 kg 23.5 lbs P.4
< 1.3 > Installatin NP717/NP819 Step O Munt the display panel with M6 screw set. M6 screw x 4 pcs required ( Left & right side ). M6 screw sets are nt prvided. Step O Fix the LCD int the rack. NP920 Step O Munt the display panel with M6 screw set. M6 screw x 8 pcs required ( Left & right side ). M6 screw sets are nt prvided. Step 0 Fix the LCD int the rack. P. 5
< Part 2 > < 2.1 > Prduct Specificatins - NP717/NP819 NP717 NP819 Manufacturer AJO AJO Panel Size ( diagnal) 17-inch TFT clr LCD 19-inch TFT clr LCD Display pixel ( dts x lines ) 1280x1024 1280x1024 Brightness (typ. ) 250 250 Cntrast Rati (typ. ) 1000:1 1000:1 Clr 16.7 M 16.7 M Viewing Angle (L/R/U/D) 80/80/80/80 85/85/80/80 Respnse Time ( ms ) 5 5 Dt pitch ( mm ) 0.264 0.294 Display Area ( mm ) 337.92H x 270.33V 376.32Hx301.06V Surface treatment Haze 25%, Hard-cating Surface hardness 3H 3H Backlight Type CCFL LED MTBF ( hrs ) 50,000 30,000 Vide Cnnectivity Digital HDMI HDMI 1.1.CEA-861-D DVI DVI-D, TMDS single link Analg VGA Analg 0.7Vp-p Cmpsite ( BNC ) NTSC & PAL S-Vide (4-pin ) NTSC & PAL Plug & Play DVI / VGA VESA EDID structure 1.3 Synchrnizatin VGA Separate, Cmpsite & SOG Audi Cnnectivity Audi Input Cnnectr 3.5mm stere jack Impedance / Pwer level 30kO / 750mV Audi Output Cnnectr 3.5mm stere jack Resistance / Pwer level 30kQ / 2.8V Speaker Output Pwer 2x2W "When the audi utput is cnnected, speaker utput is OFF Pwer Supply Range Aut-sensing 100 t 240VAC, 50 / 60Hz Pwer Cnsumptin Screen display ON 25W r less Pwer saving mde Pwer buttn OFF 4W r less 1W r less Regulatry Safety FCC & CE certified Envirnmental RHS2 & REACH cmpliant R6
Operating Temperature 0 t 50 C degree Humidity 20-90%, nn-cndensing Strage Temperature -5t60 Cdegree Humidity Shck Vibratin 5-90%, nn-cndensing 10G acceleratin (11ms duratin) 5-500Hz 1G RMS randm NP717 NP819 Prduct ( W x D x H ) 480x54.2x310 mm 18.9x2.1 x 12.2 inch 480 x 53.3 x 354.8 mm 18.9x2.1 x 14 inch Packing (WxDxH ) 529 x 124 x495 mm 20.8 x 4.9 x 19.5 inch 539 x 129x529 mm 21.2x5.1 x 20.8 inch Net Weight 6.1 kgs/13.4 lbs 5.7 kgs/12 lbs Grss Weight 8.2kgs/18lbs 8 kgs/17.6 lbs DVI-D/VGA Input PC Signal 1280 x 1024 x 60 / 75Hz 1280 x960 x60hz 1280x760x60/75Hz 1152 x864 x75hz 1024x768x60/70/75Hz 848 x 480 x 60Hz 800 x 600 x 60 / 72 / 75Hz 720 x 400 x 70Hz 640 x 480 x 60 / 72 / 75Hz 640 x 400 x 70Hz 640 x 350 x 70Hz P. 7
< Part 2 > < 2.1 > Prduct Specificatins - NP920 Manufacturer Panel Size ( diagnal) Display pixel ( dts x lines ) LG 20-inch TFT clr LCD 1600x1200 Brightness (typ. ) 300 Cntrast Rati (typ. ) 800:1 Clr 16.7 M Viewing Angle ( L/R/U/D ) 89/89/89/89 Respnse Time ( ms ) 16 Dt pitch ( mm ) 0.255 Display Area ( mm ) 408.00H x 306.00V Surface treatment Surface hardness Backlight Type Anti-glare, Hard-cating 3H CCFL MTBF ( hrs ) 45,000 Vide Cnnectivity Digital HDMI HDMI 1.1.CEA-861-D DVI DVI-D, TMDS single link Analg VGA Analg 0.7Vp-p Cmpsite (BNC ) S-Vide( 4-pin ) NTSC & PAL NTSC & PAL Plug & Play DVI / VGA VESA EDID structure 1.3 Synchrnizatin VGA Separate, Cmpsite & SOG Audi Cnnectivity Audi Input Cnnectr 3.5mm stere jack Impedance / Pwer level 30kQ / 750mV Audi Output Cnnectr 3.5mm stere jack Resistance / Pwer level 30kO / 2.8V Speaker Output Pwer 2x2W *When the audi utput is cnnected, speaker utput is OFF Pwer Supply Range Aut-sensing 100 t 240VAC, 50 /60Hz Pwer Cnsumptin Screen display ON 48W r less Pwer saving mde Pwer buttn OFF 4W r less 1W r less Regulatry I Safety FCC & CE certified Envirnmental RHS2 & REACH cmpliant P. 8
Envirnmental Cnditins Operating Temperature 0 t 50 C degree Humidity 20-90%, nn-cndensing Strage Temperature -5 t 60 C degree Humidity 5-90%, nn-cndensing Shck 10G acceleratin (11ms duratin) Vibratin 5~500Hz 1G RMS randm Physical Specificatin Prduct (WxDxH ) Packing ( W x D x H ) Net Weight Grss Weight 480x63.5x399 mm 18.9 x 2.5 x 15.7 inch 583 x 124x529 mm 23x4.9x20.8 inch 8.4 kgs/18.5 lbs 10.7 kgs/23.5 lbs DVI-D/VGA Input PC Signal 1600 x1200 x60hz 1400 x1050 x60hz 1440 x900 x60hz 1360 x768 x60hz 1280x1024x60/75Hz 1280 x960 x60hz 1280x760x60/75Hz 1152 x864 x75hz 1024x768x60/70/75Hz 848 x 480 x 60Hz 800 x 600 x 60 / 72 / 75Hz 720 x 400 x 70Hz 640 x 480 x 60 / 72 / 75Hz 640 x 400 x 70Hz 640 x 350 x 70Hz P. 9
< 2.2 > On-screen Display Operatin ( OSD ) NP819 O Pwer light Green = On Orange = Pwer saving Membrane Switch e < * Functin Pwer n / ff LCD «># > if* Display the OSD menu Scrlls thrugh menu ptins and adjusts the displayed cntrl (T aut adjustment by pressing the buttn < > fr 5 secnds) Exit the OSD screen Tggle analg, digital & vide cnnectin (DVI-D and vide ptins nly) NP717/NP920 i= t) Membrane Switch Functin 6 Turn the mnitr n r ff DCZI Dl=l DCZI Display the OSD menu Act as an Enter key t select screen setting ptins A V < > ^ Scrll thrugh menu ptins and adjust the displayed cntrl Exit the OSD screen G back t the previus n-screen sub-menu r main menu Remark : All LED tuch buttns in WHITE light. The LED f Pwer ( ) tuch buttn will flash cntinuusly when there is n signal input. (T) All the LED tuch buttns will autmatically turn ff after 10 minutes f idle status ( except the Pwer ). Light up all membrane buttns, please press any buttn fr 1-2 secnds ( except the Pwer @ ). P.10
< 2.2 > On-screen Display Operatin ( OSD ) Ver: G56SN20SSTD701 1024x768 59.8Hz Image Brightness [1 ] 50 Cntrast J ] 50 Clr Temp Red User I^^M 0 255 Green [I Q 255 Mi Blue J Q 255 OSD Cnfiguratin Page m Adjust: Select: + Set: /i=i Image: fr the brightness, cntrast, clr temp, red, green, and blue Exit: t tj3 t- Gemetry: fr the aut adjust, H psitin, V psitin, phase and clck Vide: fr the clur, tint, sharpness, nise reductin, DCDi and TV Setup J> Audi: fr vlume, bass, treble, balance, AVL and mute Misc Misc: fr the language, OSD psitin, graphic mde, rati, reset and timer P.11
< Part 3 > < 3.1 > Optins : 3G / HD / SD-SDI input itechlcds' SDI input is an ideal slutin fr the bradcastgrade vide and high reslutin CCTV market. Designed fr use with NetView Full HD 1080p and ultra high reslutin 1920 x 1200 LCD displays, itechlcd prvides a SDI input mdule withut using additinal space r pwer and it cmes standard with a 2-year warranty. SDI DVI-D l HfflJj Audi i 1 ut - in - in Vide PC Pwer BNC S-Vide VGA cp^jp ut - in HDMI P=^fl FrSDI ptin, the AD bard will be upgraded t AV3.0, and this cmes standard with HDMI, DVI-D, VGA, S-Vide, BNC and audi inputs. 3G-SDI IN 3G-SDI OUT BNCxI /0.8Vp-p(75hm) BNC x 1 /Active thrugh, equalized & relcked Standard Cmpliance Vide SMPTE 425M / 274M / 296M / 125M ITU-R BT.656 Audi SMPTE 299M / 272M-C Cmpatible Vide Frmat 3G-SDI 1080p @60/50Hz, 4:2:2 1080p @30 / 25/24Hz, 4:4:4 1080i @60/50Hz, 4:4:4 720p @60/50Hz, 4:4:4 HD-SDI 1080p @30 / 25/24Hz, 4:2:2 1080i @60/50Hz, 4:2:2 720p @60/50Hz, 4:2:2 SD-SDI 480i @60Hz, 4:2:2 ITU-R BT.656 576i @50Hz, 4:2:2 Cmpatible Audi Frmat 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchrnized Vide HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchrnized Vide SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchrnized / Asynchrnized Vide Max. Transmissin Distance 75 hm caxial cable 3G-SDI HD-SDI SD-SDI 150mat2.97Gb/s 250mat1.485Gb/s 480mat270Mb/s P.12
< 3.2 > Optins : MCS ( Multi-display Cntrl) Mre cntrl is always gd. Especially when it is necessary and easy. itechlcd prvides MCS slutin t cntrl the OSD f varius NetView LCD display up t 64 units. The RS-232C is used fr the cmmunicatin between the PC and the first display via a 15 feet serial cable while the CAN bus is used fr the varius LCD displays cascade tgether via CAT 5/6 cable, and daisy chain up t 1,000 meters. Designed fr use with NetView LCD displays, itechlcd prvides a MCS input mdule withut using additinal space r pwer and it cmes standard with a 2-year warranty. HDMI Audi 1 B O O O ut - in - in Vide PC ; VGA p 0W er BNC S-Vide [QLJBJBLH DVI-D MCS m < set ut in Link *** Please dwnlad the prtcl f MCS cntrl *** Fr MCS ptin, casing depth will be changed. RS-232C B Set switch Fr the 1st and last display, push the set switch upward 15 feet serial cable ( ver 15 feet, extender required ) Fr ther daisy chain displays, push the set switch dwnward. 'L A,;.*4 111 RJ-45 jack LINK OUT IN 1 t Cat5 / 6 cable max. 300 meters OUT J IN t Cat5 / 6 cable max. 300 meters Daisy chain up t 1,000 meters and 64 displays P.13 OUT I ii 1 IN t Cat5 / 6 cable max. 300 meters Ol JT up t 64 displays
< 3.3 > AV2.2D Upgrade Optins : -DVI-D (DVI-DTMDS single link) - AV ( S-Vide + Cmpsite, BNC ) - Audi ( 3.5mm audi jacks fr audi in & ut, and 2W + 2W speakers ) DVI-D, Aud ', Pwer BNC S-Vide VGA l n~s] ] O O O C% (8) fft c & b ut - in - in ^ ^=^ ^^ > j Vide PC < 3.4 > AV2.2H Upgrade Optins : - HDMI ( HDMI 1.1, CEA-861-D ) - AV ( S-Vide + Cmpsite, BNC ) - Audi ( 3.5mm audi jacks fr audi in & ut, and 2W + 2W speakers ), Aud ', Pwer BNC S-Vide VGA HDMI 0 0 0 0 ejsb s ut - in - in '^ ^^ ^^ "fc i'" I' ] l nut -in- in ^^ ^=^ ^e^ 11 A [i- wj Vide PC P.14
< 3.5 > AV3.0 Upgrade Optins : - HDMI ( HDMI 1.1, CEA-861-D ) -DVI-D ( DVI-D TMDS single link) - AV ( S-Vide + Cmpsite, BNC ) - Audi ( 3.5mm audi jacks fr audi in & ut, and 2W + 2W speakers ) DVI-D,, Pwer BNC S-Vide VGA [ rjm l O O O fs fl J*^h ut - in - in ^ ^=^ ^ ^ \, j- Vide PC HDMI P.15
< 3.6 > Optins : Tuchscreen & driver 17" /19" USB Tuchscreen Specificatin Mdel 17' 19" 17" 19" TRB e-resistive TCB e-capacitive Technlgy 5-Wire Resistive Capacitive Tuch Pint Single Single Methd Stylus r Finger Finger Activatin Frce < 50g / Stylus=R0.8 ^50g Durability 35 millin tuches 300 millin tuches Respnse Time 15 ms 20 ms Optical Transmittance 80% ± 3% 93% ±2% Surface Hardness 3H 9H Haze 8% ± 3% 7% Glass 1.4 ±0.2 mm 3.2 ±0.2 mm 2.8 mm ±10% 2.8 mm ±10% Cnnectr USB Type A USB Type A Cmpatibility Windws 7 / XP / Vista, Linux Windws 7 / XP / Vista, Linux 20" USB Tuchscreen Specificatin Mdel Technlgy Tuch Pint Methd Activatin Frce Durability Respnse Time Optical Transmittance Surface Hardness Haze Glass Cnnectr Cmpatibility TRB e-resistive 5-Wire Resistive Single Stylus r Finger <50g/Stylus=R0.8 35 millin tuches 15 ms 80% ± 3% 3H 8% ± 3% 3.2 ±0.2 mm USB Type A Windws 7 / XP / Vista, Linux USB tuchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc Fr detailed infrmatin, please refer t the attached CD disc As the tuchscreen unit is nt made f tughened glass, please handle it carefully USB Tuchscreen DVI-D Pwer VGA P.16
< 3.6 > Optins : Tuchscreen & driver 0^ TRB & TCB Driver Please fllw the belw steps t setup the tuch screen: Step 1. Run the bundled CD disc r dwnlad the driver Step 2. Duble click the Setup.exe Step 3. Fllw the installatin instructin t finish the setup Step 4. After installatin, run the TuchKit prgram & the "4 pint calibratin" X T^u^KKit Please d the initial calibratin after the first setup P.17
+ - < 3.7 > Optins : DC Pwer fetej Mdel 12V 24V 48V Input rating Input vltage: 12-Vlt 24-Vlt 48-Vlt Input range: 9~ 18V 18-36V 36 ~ 75V Input current - N lad 50 ma 50 ma 50 ma - Full lad 4950 ma 2450 ma 1220 ma Output rating Output vltage: 12-Vlt 12-Vlt 12-Vlt Output current: 4.16A 4.16A 4.16A Efficiency 84% 85% 85% P.18
< 3.8 > Optins : MIL-type r Lckable Cnnectr MIL -type Cnnectr Input Part n. MIL Standard DC Pwer *** ( Male ) MS3470W8-33P ffltf) MIL-DTL-26482 VGA *** ( Male ) MS3470W14-15P ^^tf) MIL -DTL- 26482 There are several additinal MIL DC and VGA cnnectr types with varying design characteristics t meet cst cnsideratins and t prvide users with the mst design flexibility pssible. Fr mre infrmatin, please cntact us. Lckable Cnnectr DC Pwer ( Male ) Input Part n. Standard YM-Ext-461CP001 ^0 D-type 3W3 USB LUSB-A111-00 MIL - type r Lckable cnnectrs abve can be integrated with ur LCD displays. Sale service just fr cnnectrs nt prvided. P.19
I-TECH COMPANY i-tech Cmpany LLC TOLL FREE: (888) 483-2418 EMAIL: inf@itechlcd.cm WEB: www.itechlcd.cm