QUICK START GUIDE GUIDE DE MISE EN ROUTE RAPIDE GUIDA RAPIDA KURZANLEITUNG GUÍA DE INICIO RÁPIDO
CONTENTS PAGE WHATS BEEN INSTALLED Page No. 1. 2. EN CONTENTS PAGE... 2 EN WHATS BEEN INSTALLED... 3 WELCOME TO io... 4 GET CONNECTED... 5 GET DISCONNECTED... 7 FREQUENTLY ASKED QUESTIONS... 8 WARRANTY INFORMATION... 9 Warranty... 9 16 PIN SWITCH Trademark... 9 Declaration of Conformity... 9 Copyright... 9 Modifications... 9 Correct Disposal of this Product (Waste Electrical Electronic Equipment)... 9 4. 5. PRODUCT REGISTRATION... 10 NOTES... 11 (Optional) (Optional) (Optional) 1. 2. io CONNECT Amplifier. ISO harness to 24way microfit (T-piece). 16 way microfit to Female Phono with ghost/full audio switch. 4. 5. Male Jack to Male Phono. Female Jack to Male Phono. Male Jack to Male jack. 2 www.my-io.com www.my-io.com 3
WELCOME TO io GET CONNECTED Thank you for purchasing an io CONNECT. STEP 1 Turn on the ignition. STEP 2 Ensure your portable device is charged. EN EN Phono STEP 3 Now connect your portable device by its headphone socket. Use either Option1 or Option 2 (Dependant on your installation type). io CONNECT AMP Option 2 Option 3 Vehicle interior panel Phono e.g. Audio play back from In-car DVD installation. THE io PRODUCT RANGE Option 1 Headphone socket on portable device. 4 www.my-io.com www.my-io.com 5
GET CONNECTED GET DISCONNECTED STEP 4 Select mute switch position. STEP 1 Stop /Pause your portable device. EN FL FR EN RL RR Full Mute Setting (Music) or FL FR RL RR Ghost Mute Setting (Sat Nav) STEP 2 Unplug your portable device from io CONNECT. STEP 5 Turn on and play or/and stream satellite navigation commands from your portable device. & STEP 6 Check Volume level is greater than 50%. 50% + NOTE: Please use your io CONNECT responsibly in your vehicle. NOTE: Please refer to your portable device handbook when connecting and disconnecting cables as some manufacturers differ. 6 www.my-io.com www.my-io.com 7
FREQUENTLY ASKED QUESTIONS WARRANTY INFORMATION WARRANTY Armour Automotive warrants this product to be free from defects in material and workmanship under normal use for a period of Q. MY DEVICE DOES NOT PLAY THROUGH MY CAR SPEAKERS WHEN I PLUG 12 months from the date of original purchase with receipt. Should service be necessary under this warranty for any reason due EN IT INTO io CONNECT? to manufacturing defect or malfunction during the warranty period, Armour Automotive will repair or replace (at its discretion) EN the defective merchandise with equivalent products. The warranty excludes damage or abuse caused by customer misuse. All A. Ensure you have turned on your ignition in your vehicle. warranties are to be handled by the original retailer where the goods were purchased. A. Ensure your device volume setting is turned up to at least 50%. This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the original A. Ensure the Headphone Connectors or Phono Connectors are properly engaged. purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as provided herein beginning A. Ensure your connected device is not paused. with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. A. Ensure your connected device is charged and switched on. Armour Automotive does not warrant failure of an io product caused by incorrect installation by a non approved installation center. A. Ensure your Audio Mute Switch is set to either Full or Ghost Mute. Q. IS MY DEVICE COMPATIBLE WITH io CONNECT? TRADEMARK All rights reserved. The io trademarks are the sole and exclusive property of Armour Automotive. Any other trademarks or names used in io documentation are copyright protected and are the sole and exclusive property of their respective owners. A. As long as your device has a Headphone Socket or Audio Phono Connectors it is compatible with io CONNECT. Q. WHAT SHOULD I DO IF I NEED A REPLACEMENT CONNECTOR LEAD FOR MY io CONNECT? A. Please visit www.my-io.com where you can view our full range of replacement accessories and details of stockists in your area. Q. WHAT ELSE? A. Visit www.my-io.com/support to view a more detailed user manual on using your io CONNECT, answers to some common problems you may experience and all relevant safety and compliance information. DECLARATION OF CONFORMITY We Armour Automotive, declare under our sole responsibility that io CONNECT complies with the essential requirements for CE Marking when used in a residential, commercial, vehicular or light industrial environment. COPYRIGHT Copyright 2007; Armour Automotive. All rights reserved. The total or even partial reproduction, transmission or storage of this guide in any form or by any process whatsoever (electronic, mechanical, photocopy, recording or otherwise) is strictly prohibited without prior consent from Armour Automotive. MODIFICATIONS The explanations and specifications in this guide are given for information purposes only and may be modified without prior notice. They are deemed to be correct at the time of going to press. The utmost care has been taken when writing this guide, as part of the aim to provide you with accurate information. However, Armour Automotive shall not be held responsible for any consequences arising from any errors or omissions in the guide. Armour Automotive reserves the right to amend or improve the product design or user guide without any restrictions and without any obligation to notify users. As part of our ongoing concern to improve our products, the product that you have purchased may differ slightly from the model described in this guide. If so, a later version of this guide might be available in electronic format at www.my-io.com. CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL ELECTRONIC EQUIPMENT) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office. Business users should contract their supplier and the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposals. 8 www.my-io.com www.my-io.com 9
PRODUCT REGISTRATION NOTES RECEIVE GREATER BENEFITS BY REGISTERING YOUR io PRODUCT IN FIVE EASY STEPS. EN EN BENEFITS: Access to online product support. Warranty and after sales service. Exclusive online login to www.my-io.com. STEP 1 Visit www.my-io.com/register STEP 2 Log-in or Register your details. STEP 3 Enter the product details shown below on your registration label and follow the registration steps. View Back Page. STEP 4 Registration is now complete. STEP 5 Enjoy your io Experience with total peace of mind. 10 www.my-io.com www.my-io.com 11
PAGE TABLE DES MATIERES CE QUI EST INSTALLE Page No. 1. 2. PAGE TABLE DES MATIERES... 12 CE QUI EST INSTALLE... 13 BIENVENUE CHEZ io... 14 DECONNECTEZ... 17 QUESTIONS FREQUEMMENT POSEES... 18 INFORMATIONS SUR LA GARANTIE... 19 GARANTIE... 19 SWITCH FR FR 16 PIN MARQUE COMMERCIALE... 19 DECLARATION DE CONFORMITE... 19 DROITS DE REPRODUCTION (COPYRIGHT)... 19 MODIFICATIONS... 19 ELIMINATION CORRECTE DE CE PRODUIT... 19 4. 5. ENREGISTREMENT DU PRODUIT... 20 NOTES... 21 (OPTION) (OPTION) (OPTION) Amplificateur io CONNECT. Faisceau ISO vers micro-connecteur 24 voies (raccord T). Micro-connecteur 16 voies vers prise femelle Phono Male Jack to Male Phono. avec commutateur audio silencieux fantôme/complet (ghost/full mute). 12 www.my-io.com www.my-io.com 13 1. 2. 4. 5. Prise Jack mâle 3,5 mm vers prise mâle Phono. Prise Jack femelle 3,5 mm vers prise mâle Phono. Prise Jack mâle 3,5 mm vers prise Jack mâle 3,5 mm.