DRILL FASTER RUN HARDER WORK SMARTER CRI PRODUCT CATALOG

DRILL FASTER RUN HARDER WORK SMARTER CRI PRODUCT CATALOG

INDUSTRIES SERVED CONSTRUCTION Center Rock Inc. serves the global construction industry by designing, manufacturing, and distributing a complete line of air drilling tools and products including DTH hammers & bits from 3.5-36 (89mm - 914mm) in diameter, LP canister drills and hole-openers (conventional and reverse circulation) from 24-144 (610mm - 3658mm), ROTO LOC underreamer systems for casing advancement, and other support equipment such as water injection systems, oil injection systems, air manifolds, and Hydro-Jaw breakout / make-up systems. UTILITY Center Rock Inc. provides state-of-the-art drilling products to support the utility industry. Our mono-hammer utility pole drill offerings range from 3.5-24 (89mm - 610mm) and include hex connection, side inlet swivel, and all ancillary items. Additionally, only Center Rock offers Utility and HDD LP canister style drills 18 (457mm) and larger. Multi-hammer canister style LP Drills boast lightweight construction, low vibration and low air requirements which will ensure success in any drilling condition and are perfectly suited for mounting on any digger derrick unit. OIL AND GAS Since day one, Center Rock has served the Oil and Gas industry with quality DTH hammers and bits ranging from 3.5-36 (89mm - 914mm) and specifically designed to meet the rugged demands of deep hole drilling. With available on-site support, a consultative approach and 24/7 customer support, Center Rock is the Oil and Gas supplier of choice. From jet subs to diamond enhanced carbide bits to Hydro-Jaw breakout / make-up systems, we have a tailored solution for any Oil and Gas drilling application. MINING AND QUARRY When it comes to drilling blast holes, Center Rock has a complete product portfolio of innovative tools and accessories to satisfy any surface or underground application requirement. We have DTH hammers and bits that will drill 3.5-36 (89mm - 914mm) blast-holes. Also available is our Mining LP canister drill, 20 (508mm) and larger, for drilling utility/ventilation holes, burn holes, etc. These mining LPs are perfectly suited to drill either up, down or any inclination, from vertical to horizontal, in an underground mining environment. WATER WELL AND GEOTHERMAL Center Rock Inc. designs and manufactures DTH hammers from 3.5 to 20 (88.9mm-508mm) and DTH button bits up to 36 (914.4mm) with various shanks, face styles, and carbide button configurations. For waterwell drillers, we offer three lines of hammers; the valveless CR line, the valved Rock Force (RF) (both utilize QL shank bits), and the Rock Xtreme (RX) line. The RX offering is the newest, valved, high frequency hammer developed by Center Rock with it s own bit shank design and no blow tube. Center Rock has also designed a unique underreamer overburden drilling system, ROTO LOC, that drills and simultaneously advances casing. 2

YOUR DRILLING SOLUTION! TABLE OF CONTENTS Center Rock Force Hammer Series... 4 Rock Xtreme Hammer Series... 8 CR Hammer Series... 12 CRI Bits... 16 Low Profile (LP) Drills... 20 Other Products... 24 RF 55 Hammer Cutaway RX 55 Hammer Cutaway CR 55 Hammer Cutaway 3

CENTER ROCK FORCE HAMMER SERIES 4

CENTER ROCK FORCE LINE OF DOWN-THE-HOLE HAMMERS The Center Rock Force line of high performance down-the-hole hammers and bits are available to suit a broad range of hole sizes and applications. All Center Rock Force hammers feature a high efficiency and tunable valved air cycle to optimize performance on your compressor. Many models also feature a heat resistant steel valve which keeps on working even in the most demanding quarry and mining applications. Additionally, most models feature reversible casings so you can get the most footage from your hammer. For high air flow deep hole applications, accessories such as bit retrieval systems and jetted backheads are available. FEATURES AND BENEFITS Great balance of simplicity and performance. Robust and reliable with minimal moving parts. Reversible casing. Solid piston. Industry standard bit shank. 5

CENTER ROCK FORCE HAMMER SPECIFICATIONS MODEL RF35-STD RF40-STD RF50-STD RF55-STD RF60-STD CPN 91002395 91001602 91001174 91000917 91001065 DESCRIPTION RF35 with 2-3/8 API reg pin connection RF40 with 2-3/8 API reg pin connection RF50 with 3-1/2 API reg pin connection RF55 with 3-1/2 API reg pin connection & cutting backhead RF60 with 3-1/2 API reg pin connection APPLICATION SUITABILITY Geotechnical/Foundation ü ü ü ü Waterwell/Geothermal ü ü ü ü ü Quarry/Mining ü ü ü ü ü Mineral Exploration ü Oil/Gas AVAILABLE OPTIONS Bit retainer system ü Jetted backhead ü Deep-hole design ü ü GENERAL SPECIFICATIONS Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric Connection 2-3/8 API reg pin 2-3/8 API reg pin 3-1/2 API reg pin 3-1/2 API reg pin 3-1/2 API reg pin Bit Shank DHD 3.5 CR40 QL50 QL50 QL60 Reversible casing NO NO YES YES YES Outside diameter 3.19 81.0 4.00 101.6 4.75 120.7 5.00 127.0 5.44 138.2 Length w/o bit, shoulder to shoulder 30.0 762.8 36.8 934.0 42.4 1077.7 40.1 1017.3 42.7 1083.8 Length with bit extended 33.9 861.8 40.8 1036.1 46.6 1184.4 44.6 1132.6 47.8 1214.1 Length with bit retracted 32.6 828.5 39.7 1007.1 45.4 1153.9 43.3 1100.3 46.4 1179.1 Weight w/o bit 47.7 21.7 112 50.9 145 65.9 153 69.5 186 84.5 Backhead across flats (in) 1.25 X 2.5 AF 1.5 x 3 AF 2 x 3-1/2 AF 2 x 3-1/2 AF 2-1/2 x 4 AF Minimum bit size 3.50 88.9 4.50 114.3 5.25 133.4 5.75 146.1 6.00 152.4 Maximum bit size 4.25 108.0 5.00 127.0 6.00 152.4 6.00 152.4 6.75 171.5 Bore 2.625 66.68 3.190 81.03 3.890 98.81 4.125 104.78 4.500 114.30 Piston weight 10.5 4.8 20.0 9.1 31.9 14.5 31.5 14.3 40.0 18.2 Stroke 4.00 101.6 4.00 101.6 4.00 101.6 4.00 101.6 4.00 101.6 Maximum pressure (psig & bar) 350.0 24.1 350.0 24.1 350.0 24.1 350.0 24.1 350.0 24.1 Maximum choke diameter 0.25 6.35 0.25 6.35 0.50 12.70 0.50 12.70 0.38 9.53 Make-up torque (ft-lb & N-m) 3000 4062 4000 5416 5000 6770 5000 6770 6000 8124 AIR CONSUMPTION 100 PSI/ 6,9 bar (scfm & m^3/min) 142 4.0 183 5.2 202 5.7 149 4.2 305 8.6 100 psi (bpm) 1289 1289 1226 1226 1116 1116 1116 1116 1122 1122 150 psi/ 10,3 bar (scfm & m^3/min) 219 6.2 284 8.0 310 8.8 247 7.0 431 12.2 150 psi (bpm) 1509 1509 1353 1353 1266 1266 1266 1266 1301 1301 200 psi/ 13,8 bar (scfm & m^3/min) 288 8.1 386 10.9 422 11.9 360 10.2 561 15.8 200 psi (bpm) 1699 1699 1479 1479 1401 1401 1401 1401 1453 1453 250 psi/ 17,2 bar (scfm & m^3/min) 348 9.8 488 13.8 538 15.2 488 13.8 695 19.6 250 psi (bpm) 1858 1858 1606 1606 1521 1521 1521 1521 1576 1576 300 psi/ 20,7 bar (scfm & m^3 min) 400 11.3 590 16.7 658 18.6 632 17.8 832 23.5 300 psi (bpm) 1,987 1,987 1733 1733 1626 1626 1626 1626 1671 1671 350 psi/ 24,1 bar (scfm & m^3/min) 444 12.5 691 19.5 783 22.1 791 22.3 973 27.5 6

RF65-STD RF80-STD RF88-STD RF100-STD RF120-STD RF200-STD RF200S-STD 91000912 91001192 91001223 91001593 91001390 91001256 91002141 RF65 with 3-1/2 API reg pin connection & cutting backhead RF80 with 4-1/2 API reg pin connection RF88 with 4-1/2 API reg pin connection RF100 with 6-5/8 API reg pin connection RF120 with 6-5/8 API reg pin connection RF200 with 8-5/8 API reg pin connection and jetted backhead RF200S with 8-5/8 API reg pin connection and jetted backhead ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 3-1/2 API reg pin 4-1/2 API reg pin 4-1/2 API reg pin 6-5/8 API Reg Pin 6-5/8 API reg pin 8-5/8 API reg pin 8-5/8 API reg pin QL60 QL80 CR88 N100 QL120 QL200 QL200 YES YES YES No NO YES YES 5.88 149.4 7.13 181.1 7.75 196.9 9.0 228.6 11.20 284.5 15.60 396.2 15.60 396.2 41.8 1060.7 57.2 1452.6 58.9 1496.1 59.9 1520.2 72.9 1850.6 67.2 1705.6 73.7 1872.9 46.0 1169.4 63.7 1618.0 66.8 1697.7 69.0 1753.4 83.6 2124.5 78.5 1992.9 85.3 2166.9 44.9 1141.5 61.9 1571.5 64.9 1649.2 67.1 1704.3 81.4 2066.5 76.2 1935.7 83.1 211.5 219 99.5 443 201.4 518 235.5 740.0 336.4 1358 617.3 2663 1210.5 3055 1385.7 2-1/4 x 3-1/2 AF 2-1/2 x 5-7/8 AF 2 x 6-7/16 AF 2-1/2 x 7-1/2 AF 2-1/2 x 9-1/4 AF 1 Holes 1 Holes 6.50 165.1 7.88 200.2 8.75 222.3 9.63 244.6 12.25 311.2 17.50 444.5 28.00 711.2 6.75 171.5 10.00 254.0 11.00 279.4 12.25 311.2 22.00 558.8 26.00 660.4 36.00 914.4 4.875 123.83 5.875 149.23 6.410 162.81 7.54 191.52 9.25 234.95 12.25 311.15 12.25 311.15 45 20.5 107.2 48.7 117 53.2 178.0 80.9 304 138.2 610 277.3 610 277.3 4.00 101.6 4.00 101.6 4.00 101.6 4.0 101.6 4.00 101.6 4.00 101.6 4.00 101.6 350.0 24.1 350.0 24.1 350.0 24.1 350.0 24.1 350.0 24.1 250.0 17.2 250.0 17.2 0.00 0.00 0.00 0.00 0.00 0.00.00.00 0.88 22.23 1.40 35.56 1.40 35.56 6000 8124 8000 10832 9000 12186 10000 13540 12000 16248 18000 24372 18000 24372 235 6.6 358 10.1 560 15.8 581 16.4 909 25.7 1584 44.7 1584 44.7 1350 1350 830 830 968 968 950 950 585 585 701 701 701 701 383 10.8 571 16.1 826 23.3 1000 28.2 1336 37.8 2470 69.8 2470 69.8 1456 1456 947 947 1050 1050 1050 1050 695 695 807 807 807 807 543 15.3 808 22.8 1092 30.8 1400 39.5 1811 51.2 3389 95.7 3389 95.7 1561 1561 1063 1063 1132 1132 1150 1150 805 805 923 923 923 923 713 20.1 1067 30.2 1358 38.4 1781 50.3 2333 65.9 4341 122.6 4341 122.6 1667 1667 1180 1180 1215 1215 1250 1250 915 915 1049 1049 1049 1049 894 25.3 1350 38.1 1624 45.9 2143 60.5 2903 82.0 5324 150.4 5324 150.4 1773 1773 1297 1297 1297 1297 1350 1350 1025 1025 1185 1185 1185 1185 1086 30.7 1656 46.8 1890 53.4 2486 70.2 3519 99.4 6340 179.1 6340 179.1 7

ROCK XTREME HAMMER SERIES 8

ROCK XTREME LINE OF DOWN-THE-HOLE HAMMERS Center Rock s Rock Xtreme bits and hammers deliver undisputable performance and profitability in even the most challenging operating conditions. Our bits, with 50% more actual spline area and no exhaust tube, weigh up to 60% less versus competitive offerings. That means optimum economy, reliability, and durability... and far less rig vibration during drilling, drastically reducing your downtime labor and replacement part costs! FEATURES AND BENEFITS High performance valved air cycle. High frequency low vibration operation. No exhaust tube or foot valve. Lightweight economical bits. Largest shank cross section available. 9

ROCK XTREME HAMMER SPECIFICATIONS APPLICATION SUITABILITY Geotechnical/Foundation Waterwell/Geothermal Quarry/Mining RCX45 - STD RCX55 - STD RX55 - STD 91002323 91001422 91001307 RCX45 w/4 Remet Box Connection RCX55 w/4-1/2 Remet Box Connection Mineral Exploration ü ü Oil/Gas AVAILABLE OPTIONS: Bit Retainer RX55 w/3-1/2 API Reg Pin Connection & Cutting Backhead GENERAL SPECIFICATIONS: Imperial Metric Imperial Metric Imperial Metric Connection 4 Remet Box 4-1/2 Remet Box 3-1/2 API Reg Pin Bit Shank RCX45 RCX55 RX5 Reversible Casing No No No Outside Diameter 4.56 115.8 5.25 133.4 5.00 127.0 Length w/o Bit Shoulder to Shoulder 35.2 894.6 35.2 894.3 30.50 773.9 Length w/bit Extended 38.5 977.4 38.1 968.5 34.50 877.1 Length w/bit Retracted 37.1 942.3 36.9 938.3 33.40 847.1 Weight w/o Bit 108 49.1 132 60.0 124.00 56.4 Backhead Across Flats (in.) 1-3/4 x 3.35 AF 1-3/4 x 4-1/4 AF 1-3/4 x 4 AF Minimum Bit Size 4.75 120.7 5.50 139.7 5.50 139.7 Maximum Bit Size 5.50 139.7 6.00 152.4 6.00 152.4 Bore 3.960 100.58 4.500 114.3 4.125 104.78 Piston Weight 22.1 10 30 13.6 29.00 13.2 Stroke 3.25 82.6 3.25 82.6 3.25 82.6 Maximum Pressure Differential (psig & bar) 500.0 34.5 500.0 34.5 500.0 34.5 Maximum Choke Diameter 0.00 0.00 0.00 0.00 0.00 0.0 Make-up Torque (ft-lb & N-m) 4500 6093 5000 6770 5000 6770 AIR CONSUMPTION: 100 psi/6,9 bar (scfm & m^3/min) 140 4.0 155 4.4 155 4.4 100 psi (bpm) 1350 1350 1350 1350 1116 1116 150 psi/10,3 bar (scfm & m^3/min) 231 6.5 257 7.3 257 7.3 150 psi (bpm) 1532 1532 1532 1532 1266 1266 200 psi/13,8 bar (scfm & m^3/min) 337 9.5 374 10.6 374 10.6 200 psi (bpm) 1695 1695 1695 1695 1401 1401 250 psi/17,2 bar (scfm & m^3/min) 457 12.9 508 14.3 508 14.3 250 psi (bpm) 1840 1840 1840 1840 1521 1521 300 psi/20,7 bar (scfm & m^3/min) 591 16.7 657 18.6 657 18.6 300 psi (bpm) 1967 1967 1967 1967 1626 1626 350 psi/24,1 bar (scfm & m^3/min) 739 20.9 822 23.2 822 23.2 350 psi (bpm) 2076 2076 2076 2076 1716 1716 ü ü 10

RX60 - STD RX65 - STD RX70 RX80 - STD RX120- STD 91001245 91001205 91002722 91001332 91002560 RX60 w/3-1/2 API Reg Pin Connection RX65 w/3-1/2 API Reg Pin Connection & Cutting Backhead RX70 w/4-1/2 API Reg Pin Connection RX80 w/4-1/2 API Reg Pin Connection RX120 w/6-5/8 API Reg Pin Connection ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 3-1/2 API Reg Pin 3-1/2 API Reg Pin 4-1/2 API Reg Pin 4-1/2 API Reg Pin 6-5/8 API Reg Pin RX6 RX6 RX7 RX8 RX120 No No No Yes Yes 5.60 142.2 5.88 149.4 6.88 174.8 7.13 181.1 11.20 284.5 30.90 784.9 30.90 784.9 34.30 872.0 35.50 900.4 46.7 1186.9 34.40 873.8 34.40 873.8 39.00 989.3 40.20 1020.6 52.5 1333.8 33.40 848.4 33.40 848.4 37.40 949.2 38.90 987.6 50.4 1280.9 153.00 69.5 173.00 78.6 264 120.0 289.00 131.4 933 424.1 2 x 4 AF 2 x 4 AF 2-1/2 x 5 AP 1-3/4 x 5-5/8 AF 2-1/4 x 10 AF 6.13 155.7 6.50 165.1 7.88 200.2 7.88 200.2 12.25 311.2 6.75 171.5 6.75 171.5 8.88 225.6 10.00 254.0 22.00 558.8 4.625 117.48 4.625 117.48 5.64 143.18 5.875 149.23 9.50 241.30 35.00 15.9 35.00 15.9 58.1 26.4 72.60 33.0 239 108.6 3.50 88.9 3.50 88.9 3.50 88.9 3.50 88.9 3.50 88.9 350.0 24.1 350.0 24.1 350.0 24.1 350.00 24.1 350.00 24.1 0.38 9.53 0.38 9.53 0.53 13.46 0.88 22.23 0.88 22.23 6000 8124 6000 8124 7000 9478 8000 10832 12000 16248 305 8.6 305 8.6 265 7.5 358 10.1 804 22.7 1461 1461 1461 1461 1068 1068 830 830 585 585 431 12.2 431 12.2 442 12.5 571 16.1 1248 35.3 1576 1576 1576 1576 1294 1294 947 947 695 695 561 15.8 561 15.8 649 18.3 808 22.8 1680 47.5 1691 1691 1691 1691 1502 1502 1063 1063 805 805 695 19.6 695 19.6 886 25.0 1067 30.2 2100 59.3 1806 1806 1806 1806 1690 1690 1180 1180 915 915 832 23.5 832 23.5 1152 32.5 1350 38.1 2508 70.8 1921 1921 1921 1921 1860 1860 1297 1297 1025 1025 973 27.5 973 27.5 1447 40.9 1656 46.8 2904 82.0 2036 2036 2036 2036 2010 2010 1414 1414 1135 1135 11

CR HAMMER SERIES 12

CR LINE OF DOWN-THE-HOLE HAMMERS Center Rock s CR line of down-the-hole drills are reliable drilling workhorses that stand up to the most demanding conditions you can find. A valveless air cycle provides consistent drilling performance and reliability foot after foot and year after year. Some models are available with integrated jetted backheads as well as a bit retainer system for deep-hole drilling applications. FEATURES AND BENEFITS Great balance of simplicity and performance. Robust and reliable with minimal moving parts. Reversible casing. Solid piston. Industry standard bit shank. 13

CR HAMMER SPECIFICATIONS MODEL CR50 - STD CR55 - STD CR60W - STD CPN 91000343 91000726 91000440 DESCRIPTION CR50 w/3-1/2 API Reg Pin Connection CR55 w/3-1/2 API Reg Pin Connection & Cutting backhead CR60W w/3-1/2 API Reg Pin Connection APPLICATION SUITABILITY: Geotechnical/Foundations ü ü Waterwell/Geothermal ü ü ü Quarry/Mining ü ü Mineral Exploration ü Oil/Gas AVAILABLE OPTIONS: Bit Retainer System Jetted Backhead ü GENERAL SPECIFICATIONS: Imperial Metric Imperial Metric Imperial Metric Connection 3-1/2 API Reg Pin 3-1/2 API Reg Pin 3-1/2 API Reg Pin Bit Shank QL50 QL50 QL60 Reversible Casing Yes Yes Yes Outside Diameter 4.75 120.7 5.00 127.0 5.44 138.2 Length w/o Bit Shoulder to Shoulder 42.40 1077.7 40.10 1017.3 42.70 1083.8 Length w/bit Extended 46.60 1184.4 44.60 1132.6 47.80 1214.1 Length w/bit Retracted 45.40 1153.9 43.30 1100.3 46.40 1179.1 Weight w/o Bit 145 65.9 153 69.5 186 84.5 Backhead Across Flats (in.) 2 x 3-1/2 AF 2 x 3-1/2 AF 2-1/2 x 4 AF Minimum Bit Size 5.25 133.4 5.75 146.1 6.00 152.4 Maximum Bit Size 6.00 152.4 6.00 152.4 6.75 171.5 Bore 3.890 98.81 4.125 104.78 4.500 114.30 Piston Weight 31.90 14.5 31.50 14.3 40.00 18.2 Stroke 4.00 101.6 4.00 101.6 4.00 101.6 Maximum Pressure (psig & bar) 350.00 24.1 350.0 24.1 350.00 24.1 Maximum Choke Diameter 0.50 12.70 0.50 12.70 0.38 9.53 Make-up Torque (ft-lb & N-m) 5000 6700 5000 6770 6000 8124 AIR CONSUMPTION: 100 psi/6,9 bar (scfm & m^3/min) 202 5.7 155 4.4 360 10.2 100 psi (bpm) 1116 1116 1116 1116 1122 1122 150 psi/10,3 bar (scfm & m^3/min) 310 8.8 257 7.3 422 11.9 150 psi (bpm) 1266 1266 1266 1266 1301 1301 200 psi/13,8 bar (scfm & m^3/min) 422 11.9 374 10.6 511 14.4 200 (bpm) 1401 1401 1401 1401 1453 1453 250 psi/17,2 bar (scfm & m^3/min) 538 15.2 508 14.3 627 17.7 250 (bpm) 1521 1521 1521 1521 1576 1576 300 psi/20,7 bar (scfm & m^3/min) 658 18.6 657 18.6 771 21.8 300 (bpm) 1626 1626 1626 1626 1671 1671 350 psi/24,1 bar (scfm & m^3/min) 783 22.1 822 23.2 941 26.6 350 (bpm) 1716 1716 1716 1716 1738 1738 14

CR65 - STD CR80-STD CR88 - STD CR100 - STD CR120 - STD 91000389 91000301 91000468 91000265 91000492 CR65 w/3-1/2 API Pin Connection & Cutting Backhead CR80 w/4-1/2 API Reg Pin Connection CR88 w/4-1/2 API Reg Pin Connection CR100 w/6-5/8 API Reg Pin Connection CR120 w/6-5/8 API Reg Pin Connection ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 3-1/2 API Reg Pin 4-1/2 API Reg Pin 4-1/2 API Reg Pin 6-5/8 API Reg Pin 6-5/8 API Reg Pin QL60 QL80 CR88 N100 QL120 Yes Yes Yes No No 5.88 149.4 7.13 181.1 7.75 196.9 9.00 228.6 11.20 284.5 41.80 1060.7 57.20 1452.6 58.90 1496.1 59.90 1520.2 72.90 1850.6 46.00 1169.40 63.70 1618.0 66.80 1697.7 69.00 1753.4 83.60 2124.5 44.90 1141.50 61.90 1571.5 64.90 1649.2 67.10 1704.3 81.40 2066.5 219 99.5 443 201.4 518 235.5 740 336.4 1358 617.3 2-1/4 x 3-1/2 AF 2-1/2 x 5-7/8 AF 2 x 6-7/16 AF 2-1/2 x 7-1/2 AF 2-1/2 x 9-1/4 AF 6.50 165.1 7.88 200.2 8.75 222.3 9.63 244.6 12.25 311.2 6.75 171.5 10.00 254.0 11.00 279.4 12.25 311.2 22.00 558.8 4.750 120.65 5.875 149.23 6.410 162.81 7.540 191.52 9.250 234.95 45.00 20.5 107.20 48.7 117.00 53.2 178.00 80.9 304.00 138.2 4.00 101.6 4.00 101.6 4.00 101.6 4.00 101.6 4.00 101.6 350.00 24.1 350.00 24.1 350.00 24.1 350.00 24.1 350.00 24.1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.88 22.23 6000 8174 8000 10832 9000 12186 10000 13540 12000 16248 235 6.6 400 11.3 548 15.5 581 16.4 866 24.5 1350 1350 968 968 968 968 950 950 585 585 383 10.8 590 16.7 821 23.2 1000 28.2 1292 36.5 1456 1456 1050 1050 1050 1050 1050 1050 695 695 543 15.3 780 22.0 1093 30.9 1400 39.5 1715 48.5 1561 1561 1132 1132 1132 1132 1150 1150 805 805 713 20.1 970 27.4 1366 38.6 1781 50.3 2135 60.3 1667 1667 1215 1215 1215 1215 1250 1250 915 915 894 25.3 1160 32.8 1639 46.3 2143 60.5 2551 72.1 1773 1773 1297 1297 1297 1297 1350 1350 1025 1025 1086 30.7 1350 38.1 1912 54.0 2486 70.2 2964 83.7 1878 1878 1379 1379 1379 1379 1450 1450 1135 1135 15

CRI BITS 16

CRI LINE OF BITS Nothing is more important to drilling success than drill bits that cut straight and fast through all types of rock. That s why we offer our customers the best value in drill bits. Center Rock has a full range of face designs, button configurations, and shank styles in many sizes up to a 26 head, to match application and rock they are drilling in. WHY CRI BITS Made from premium alloy steel and high quality tungsten carbide. Heat treated and shot peened to deliver a durable and reliable balance of strength and toughness. Large bit forgings are individually ultrasonically tested and screened for inclusions and flaws. Specially designed bits for any application. Challenge us! Multiple varieties of head, face, shank and inserts available. Advanced flow simulation used to improve chip removal and reduce noise. Designed and manufactured in the USA. 17

Flat Face (F) design for medium hard to hard formations, good flushing and good penetration rates. Convex (V) design with double gauge row for medium to hard and abrasive formations, good flushing and good penetration rates. Concave/Convex (X), the best of both worlds with double gauge row and concave center for medium to hard and abrasive formations, straight holes, excellent flushing and excellent penetration rates. The all-purpose Concave (C), for soft to medium hard formations, straight holes, excellent flushing and fast penetration rates. Cyclops unique single port design maximizes bit strength and minimizes the risk of bit head splitting or chunking caused by operational and manufacturing induced fatigue stress. Back Reamer, Designed for use in Unstable Rock Drilling Conditions where operator has to Back Ream to remove tools from hole. The back reaming inserts protect the bit body from wear and damage when grinding out of hole. 18

CENTER ROCK BIT OPTION Face Styles Head Styles Flushing Holes Gage Carbide Size Shank Min dia Max dia F C V X S T R 1 2 3 9/16 5/8 3/4 7/8 1 CR40 4.50 in/114.3 mm 5.50 in/139.7 mm O O S O S O N N S N S O N N N QL50 5.13 in/130.3 mm 6.00 in/152.4 mm O S O O S O N O S N O S O N N RX55/RCX55 5.50 in/139.7 mm 6.00 in/152.4 mm O S O O N/A O S O O S O N N QL60 6.00 in/152.4 mm 8.50 in/215.9 mm O S O S S S S O S O N S O N N 360 6.00 in/152.4 mm 8.50 in/215.9 mm O S O S S S S O S O N S O N N RX60 6.25 in/158.8 mm 6.75 in/171.5 mm O S O O N/A O S O N S O O O 380 7.88 in/200.2 mm 12.00 in/304.8 mm O O O S N S S S S O N N S O N QL80 7.88 in/200.2 mm 12.00 in/304.8 mm O O O S N S S S S O N N S O N RX80 7.88 in/200.2 mm 9.88 in/251.0 mm O O O S N/A O S O N N S O N CR88 8.75 in/222.3 mm 12.00 in/304.8 mm O O O S N S S S S O N N S O N N100/CR100 9.63 in/244.6 mm 12.25 in/311.2 mm O O O S N S S S N O N N S O N SD10 9.63 in/244.6 mm 12.25 in/311.2 mm O O O S N S S S N O N N S O N 112 11.00 in/279.4 mm 17.50 in/444.5 mm O O O S N S N S N O N N S O N SD12 11.00 in/279.4 mm 17.50 in/444.5 mm O O O S N S N S N O N N S O O QL120 12.25 in/311.2 mm 24.00 in/609.6 mm O O O S N S S S N O N N O S O QL200 17.50 in/444.5 mm 26.00 in/660.4 mm O O O S N S O S N O N N N O S N180 17.50 in/445 mm 26.00 in/660.4 mm O O O S N S N S N O N N O S S Key Code: S - Standard Offering O - Optional Offering/Custom Order (Not Stocked) N - Not Offered Flushing Holes: 1 - Cyclops Single Hole 2 - Two Flushing Holes 3 - Three Flushing Holes Face Style: Head Style: F - Flat Face C - Concave Face V - Convex Face X - Concave/Convex Face S - Standard Head Without Fishing Thread T - Fishing Thread R - CRI Retainer System Optional Carbide Grades: Standard (Balanced Toughness and Wear Resistance) Premium Grade Carbide (Increased Toughness and Wear Resistance) Extra Tough for Hard Rock Semi Ballistic (Parabolic) Standard Diamond Premium Diamond (Increased Toughness and Wear Resistance) 19

LOW PROFILE (LP) DRILLS 20

Low Profile (LP) Drills Advanced engineering of Center Rock s LP Drills provide a cost effective solution for drilling excavation requirements up to 144 (3658 mm) in diameter. Our drills have been used by some of the nation s largest building, roadway, utility and mining contractors to quickly drill holes to the exact size required by their specifications. Key Features: Standard and custom-built sizes from 24-144 (610 mm - 3658 mm). Models - Full Face and Hole Openers - Direct Circulation with Calyx Basket or Can Rod Recovery - Reverse Circulation - HDD Pull Reamers - Utility Pole Drills - Raise Bore / Mining All canisters from 24-144 (610 mm - 3658 mm) utilize the exact same 6 (152 mm) class hammer. Bits are free to spin which helps to maintain gage of bore hole and also reduces wear on bits. Cost effective solution for many drilling / hard rock excavation challenges. Easy to perform maintenance in the field. Reduced bit cost as compared to large diameter hammer bits. Low air consumption vs. competitive offerings. Simply mounted to any drill rig. Customer support service 24/7. Designed and manufactured in the USA. Common Applications: CONSTRUCTION - Pilings - Caissons - Footers - Utility Pole Holes - Curtain Walls - Drilled Shafts UNDERGROUND CONSTRUCTION TECHNOLOGY - Horizontal Directional Drilling OIL / GAS ACCESS AND VENTILATION SHAFTS MINING How does it work? CONVENTIONAL LP AND HOLE OPENER Hammers fitted with button bits are positioned in a specially designed grid to ensure even cutting across the face of the hole and to promote proper flow of cuttings outward and upward into the calyx basket. For large diameter holes, a pilot shaft is drilled with a full face LP Drill (Figure A), then a larger diameter hole opener opens the pilot shaft to the required diameter up to 144 (3658 mm) (Figure B). This method allows for more efficient and faster rock drilling. Our drills have been used to cut holes up to 2,047 feet (623.9 m) deep and are designed to reach much greater depths. REVERSE CIRCULATION (RC) LP DRILL Center Rock s reverse circulation LP Drills are ideal for deep hole applications or discharge containment. We offer two styles which are capped flute recovery and center recovery. The capped flute recovery style consists of, a standard LP Drill with larger flutes that are capped, a seal band added to the base and interchanges, along with a shroud bolted to the top. The advantage of the flute style is the canister may be converted between RC and direct circulation mode. Alternatively, the center recover style has integrated return tubes flowing through the center of the canister, along with a built-in air/cuttings interchange for a shorter top connection. Both style RC LP Drills exhibit base recovery for full containment, can be manufactured with any pipe connection, and utilizes standard LP hammers and bits. 21

MODELS AND APPLICATIONS HDD LP PULL REAMER 12 (305 mm) and larger in diameter Capable of trailing drill pipe Equipped with back reamers Side protection carbide buttons for extended wear MINING LP DRILL 20 (508 mm) and larger in diameter Push or pull applications Equipped with back reamers REVERSE CIRCULATION LP DRILL 24 (610 mm) and larger in diameter Rock cuttings pickup point is at the base of the drill (yellow arrows) Can simply be converted between reverse circulation and direct circulation style UTILITY LP DRILL 18 (457 mm) and larger in diameter Hex pin connection Low air consumption Shorter length for low clearance Lightweight design No shock sub required 22

SPECIFICATIONS STANDARD SIZE LP DRILL SPECIFICATIONS LP FULL FACE DRILLS SIZE MINIMUM AIR RECOMMENDED AIR WEIGHT WITH THE CALYX NUMBER OF REQUIRED REQUIRED INCHES MM HAMMERS SCFM M 3 /MIN SCFM M 3 /MIN LBS KG 24 610 4 1600 45 2000 57 3250 1474 25 635 5 2000 57 2500 71 3500 1587 26 660 5 2000 57 2500 71 4000 1814 28 711 5 2000 57 2500 71 4200 1905 30 762 5 2000 57 2500 71 4700 2131 32 813 6 2400 68 3000 85 5500 2494 33 838 6 2400 68 3000 85 6000 2721 34 864 6 2400 68 3000 85 6200 2812 35.5 900 7 2800 79 3500 99 6500 2948 36 914 7 2800 79 3500 99 6800 3084 41.5 1054 7 2800 79 3500 99 8300 3764 42 1067 7 2800 79 3500 99 8500 3855 48 1219 10 4000 113 5000 142 10700 4853 53 1346 12 4800 136 6000 170 12700 5760 58 1473 13 5200 147 6500 184 14900 6758 60 1524 13 5200 147 6500 184 16500 7484 66 1676 15 6000 170 7500 212 17250 7824 72 1829 17 6800 193 8500 241 19700 8935 84 2134 19 7600 215 9500 269 23000 10432 LP Hole Openers: Sizes up to 144 (3658 mm) * Recommended Operating Pressure: 150-250 psi (10.3-17.3 bars) (NOTE: With a head of water, greater air pressure may be required) 23

OTHER PRODUCTS 24

Center Rock Inc. designs, manufactures and services high performance down-the-hole percussion drilling tools and bits for routine as well as challenging drilling projects ROTO LOC UNDER REAMING SYSTEMS Faster penetration through difficult overburden. Greatly reduced casing friction Easy to retract out of casing. Replaceable components change out very efficiently. Positive locking wings can be used to hold/pull casing back. Elimination of the need for cutter teeth on the starter casings. Drive shoe not needed when duplex drilling. Pilot nose face is designed to allow for straighter drilling of angled rock formations. ROTO LOC SPECIFICATIONS DIAMETER PILOT APPLICABLE CASING SYSTEM SHANK WINGS WEIGHT EXPANDED RETRACTED SHOULDER OD (in) OUTSIDE DIAMETER INSIDE DIAMETER ID (mm) WALL W (mm) RL-0513-B34 340 3 47 5.54 4.07 5.125 4.250 108.0 0.438 11.1 RL-0513-C40 CR40 3 47 5.54 4.07 5.125 4.250 108.0 0.438 11.1 RL-0550-B34 340 3 47 5.87 4.40 5.500 4.670 118.6 0.415 10.5 RL-0550-C40 CR40 3 47 5.87 4.40 5.500 4.670 118.6 0.415 10.5 RL-0600-C40 CR40 3 56 6.40 4.98 6.000 5.118 130.0 0.441 11.2 RL-0600-Q5 QL50 3 56 6.40 4.98 6.000 5.118 130.0 0.441 11.2 RL-0663-Q5 QL50 3 75 7.28 5.58 6.625 5.625 142.9 0.500 12.7 RL-0663S-Q5 QL50 3 75 7.28 5.58 6.625 6.000 142.9 0.500 12.7 RL-0663S-B35W 350W 3 75 7.28 5.58 6.625 6.000 142.9 0.500 12.7 RL-0700-Q6 QL60 3 93 7.75 5.90 7.000 6.000 152.4 0.500 12.7 RL-0700-B35W 350W 3 86 7.75 5.90 5.94 7.000 6.000 152.4 0.500 12.7 RL-0763-Q6 QL60 3 105 8.35 6.50 7.625 6.625 168.3 0.500 12.7 RL-0763-B35W 350W 3 100 8.35 6.50 7.625 6.625 168.3 0.500 12.7 RL-0863-Q6 QL60 3 154 9.33 7.54 8.625 7.625 193.7 0.500 12.7 RL-0963-Q8 QL80 3 212 10.38 8.39 9.625 8.565 217.6 0.530 13.5 RL-0963S-Q8 QL80 3 212 10.38 8.39 8.77 9.625 8.835 224.4 0.395 10.0 RL-1075-Q8 QL80 3 258 11.42 9.45 10.750 9.560 242.8 0.595 15.1 RL-1188-N10 N10 3 366 12.40 10.43 11.875 10.715 272.2 0.580 14.7 RL-1275S-N10 N10 3 478 13.41 10.90 11.63 12.750 11.750 298.5 0.500 12.7 RL-1338S-N10 N10 3 525 14.00 11.47 12.22 13.380 12.350 313.7 0.515 13.1 RL-1600S-Q12 Q12 4 970 16.93 14.37 15.06 16.000 15.250 387.4 0.375 9.5 RL-2000S-Q12 Q12 4 1269 20.87 17.93 20.000 19.000 482.6 0.500 12.7 RL-2400S-Q20 Q20 5 1269 24.882 21.89 22.81 24.000 23.000 584.2 0.500 12.7 25

HYDRO-JAW BREAKOUT SYSTEMS (1200 and 2400) The Hydro-Jaw breakout machines use a heavy-duty chain-link jaw design to quickly breakout or make-up bits, DTH hammer joints, and other API tool connections to keep your operation running smoothly. Powered by a Honda 5.5 or 8 horsepower gasoline engine linked to a single-stage hydraulic pump, the Hydro-Jaw is portable and easily moved around the job site. It is designed to safely operate in the horizontal or vertical position. A lifting eye and forklift slots make it easy to load and unload. Electric units are also available in 230 volt single phase and 230 or 480 volt 3 phase. Both units run quieter, with no exhaust fumes and with less vibration than the gas or diesel models. With its excellent power and adjustability, the Hydro-Jaw is ideal for breakout / makeup in a wide range of drilling applications. HYDRO-JAW SPECIFICATIONS HYDO-JAW 1200 HYDRO-JAW 2400 IMPERIAL METRIC IMPERIAL METRIC Standard Range 5.5 in. O.D. to 12 in. O.D. 14 cm O.D. to 30.5 cm 12 in. O.D. to 16 in. O.D. 30.5 cm O.D. to 40.6 cm w/optional Jaw Package 3 in. O.D. to 5.5 in. O.D. 7.6 cm O.D. to 30.5 cm 8 in. O.D. to 12 in. O.D. 16 in. O.D. - 22 in. O.D. 20.3 cm to 30.5 cm 40.64 cm to 55.9 cm Weight 1500 lbs 680.39 kg 2400 lbs 1088.62 kg Shipping Weight 1900 lbs 861.83 kg 2700 lbs 1224.70 kg Length (without handle) 51 in. 129.5 cm 72 in. 182.9 cm Length (with handle) 69 in. 175.3 cm N/A N/A Height 50 in. 127.0 cm 60 in. 152.4 cm Width 32 in. 81.3 cm 48 in. 121.9 cm Breakout Torque 60,000 ft. lbs 175,722 ft. lbs Make-up Torque 50,000 ft. lbs 125,136 ft. lbs 26

HAMMER HONEY ECO CRI s specially formulated Hammer Honey ECO is a readily biodegradable, environmentally friendly, premium rock drill oil. CRI s Hammer Honey ECO provides an excellent balance of tackifiers, emulsibility, and corrosion protection that makes it uniquely suited for demanding down-the-hole applications. Hammer Honey ECO s unique extreme-pressure additives prevent steel-on-steel galling and burning of hammer parts and bits that can lead to catastrophic failure. HAMMER HONEY ROCK DRILL OIL CRI Hammer Honey is a specially formulated premium rock drill oil. Hammer Honey provides a great balance of tackifiers, emulsibility, and corrosion protection that makes it uniquely suited to demanding down-the-hole applications. But that s not all, Hammer Honey s unique extreme-pressure additives prevents steelon-steel galling and burning of hammer parts and bits that can lead to catastrophic failure. CRI stands behind any CRI hammer part that fails from a frictional-induced crack when using Hammer Honey. OIL/CHEMICAL INJECTION SYSTEMS The oil injection system is a self contained, air-actuated, positive displacement system. It comes equipped with either a seven gallon reservoir with sight glass infinitely variable from 0-1 GPH or a 22 gallon reservoir with sight glass infinitely variable from 0-4 GPH. JETTED BACKHEAD Center Rock s jetted backhead is one of the simplest and most reliable on the market. Incorporated into the existing check valve system of CRI s CR80, CR88, and CR120 hammers, the jetted backhead does not require additional check valves or over-thehammer subs that complicate your down-hole assembly. When you need extra air to keep your holes clean, the jetted backhead will maintain hammer power while giving you the performance and flushing requirements and reliability to complete your project. HYDRO CYCLONE The Center Rock Hydrocyclone is a water separator that allows drilling contractors to inject as much water needed for a clean hole but without the downside of rising pressure and lost productivity. The Hydrocyclone sub separates and expels water from compressed air before it even enters the hammer. MOBILE BIT REPAIR CENTER Customize a mobile bit repair center to your specific needs. THREAD LOCKING SYSTEM Center Rock s thread locking system integrates a non-ferrous shear ring into the backhead and chuck connections, thus ensuring that the threads do not loosen during normal drilling operations. Available on our CR-88 hammer models, the locking ring is sheared off during hammer servicing with a breakout torque of roughly 30,000 ft-lb. This safety feature ensures that the threads loosen only when you want them to, not when the tool is downhole. PRESSURE CONTROL CHECK VALVE (PCCV) The PCCV allows the hammer setup to be optimized for dry drilling, while also allowing air bypass to be opened as downhole pressure builds. The PCCV opening pressure and opening flow can be adjusted for desired conditions. Therefore, with the PCCV, there is no loss in performance due to bypassing air in dry conditions and no risk of excessive standpipe pressure if water is encountered. The PCCV valve gives you the ability to truly maximize your productivity from spud to TD. 27

118 Schrock Drive P.O. Box 307 Berlin, PA 15530 Toll Free: 888.267.9004 Local: 814.267.7100 Fax: 814.267.6382 www.centerrock.com Visit our Website Visit our YouTube page DRILL FASTER RUN HARDER WORK SMARTER 09/16