65T810UAD QUICK SETUP GUIDE Before using the TV, please read this guide thoroughly and retain it for future reference. For more detailed instructions, please see the User Manual. Contents Accessories List... 1 Installing the Stand... 1 TV Rear... 3 Making Connections... 3 Remote Control... 6 Specifications... 8 ES-A150720-1 English
Accessories List Installing the Stand User Manual 1 Quick Setup Guide 1 Remote Control 1 Battery 2 Screw (M5 30) 4 Installing the Stand CAUTION Carefully place your TV facedown on a soft, flat surface to prevent damage to the TV or scratching to the screen. Top Cushion M5 30 BASE Lay the soft cushion on the table which can hold enough weight of the whole TV in case of causing damage to TV or person. Carefully remove TV and top cushion from the carton box. Put the TV with top cushion on the cushion, with its back upwards and the LCD downwards. To install the base stand, Secure the base stand to the TV with the 4 provided screws. NOTES Product image is only for reference, actual product may vary in appearance. 1
Installing the Stand WALL-MOUNT BRACKET (not provided) 9 ~ 11.5 mm Wall-Mount Bracket The TV's rear cover Screw (not provided) Spacer(not provided) Wall-Mount hole pattern VESA (mm) 400 400 Wall-Mount screw size (mm) M6 2
TV Rear TV Rear TV Back View CH + OK VOL + VOL - Power CH - TV Bottom Panel Power Switch USB DC 5V USB 0.5A(MAX) TV Side View HEADPHONE HDMI 4 HDMI 3 HDMI 2 HDMI 1 DIGITAL AUDIO OUT LAN PC AUDIO IN PC IN VGA ANT VIDEO L R Y/P B/PR AV IN COMPONENT IN USB DC 5V 0.5A(MAX) NOTES Image for reference only. Please subject to the actual TV. Check the jacks' for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. ANT Connect an outdoor VHF/UHF antenna. OR Antenna Cable (75Ω) Outdoor Antenna VHF/UHF Antenna ANT OUT LAN Connect an ethernet cable to access a network or the Internet. 3
Making Connections Turning the TV On for the First Time The Installation Guide Menu appears the first time you turn on the TV. The wizard will guide you step-by-step through the initial setup and configuration of your television. Press [POWER] to turn on your TV, it will go straight into Setup Wizard menu. Press [ / / / ] buttons to navigate the menu and change the settings. Press [OK] button to confirm. Language Setting - Select your desired language to be displayed on the menu. Select region - Select the country where you will operate the TV. Remote pairing - Pair the remote control with the TV via Bluetooth. Legal notice - View the legal information, you can send report to Hisense or not. Connect to the internet - Connect your TV to access the network via Ethernet cable or WiFi. Please refer to the user manual (Setting > Wi-Fi or Ethernet) for more information. Google Account - Log in or register a new Google Account. Select use mode - Select the TV's usage mode: Home Mode / Retail Mode. Help Make Google TV better - Select sending report to Google or not. Chanel installation - Search and store available TV channels according to the input signal. HDMI / COMPONET / AV Connect an HDMI cable or COMPONET/AV Adapter from an external A/V equipment. No sound connection is needed for HDMI to HDMI connection. If the device signal resolution does not match the specification table you need to change the setting of device according to the table. Please consult your device user manual for instruction. To select the HDMI / Component / AV Press the button to diaplay the Setting menu and select Video input, and then select the source [HDMI] / [Component] / [AV] to connect from the list Video Effect: BEST(HDMI) VIDEO L R Y/P B /P R AV IN COMPONENT IN BETTER (COMP) GOOD (AV) Component AV Y Pb Pr L R Video L R Video Camera/ Set-top Box/ Satellite Receiver 4
Making Connections VGA & AUDIO Connect a VGA cable and an audio cable from the PC. To select the VGA: Press the button to display the Setting menu and select Video Input, and then select the source [VGA] to connect from the list. PC IN VGA PC AUDIO IN PC USB Connect a USB device port for browsing photos, listening music and playing movies. Portable Storage Device DIGITAL AUDIO OUT Connect an optical cable from an external digital audio system (Toslink optical cable is needed). DIGITAL AUDIO OUT Speaker HEADPHONE Connect Headphone for audio out of the TV. Headphone 5
Remote Control Power Standby button: Power on/ Standby Power indicator Receive the voice Display the Electronic Programming Guide in DTV mode Enter the Live TV screen Display the Settings menu Mute and restore sound Display the applications recently Fast access to the all applications Adjust the volume Run Voice Search To speak a voice command press and hold the VOICE button and say a voice command Navigation buttons / / / : Up/Down/Left/ Right Select the next/previous channel Confirm button / Display the on-screen keyboard Press the cute key to see the available options anywhere Select a channel or input numbers Returns to the previous menu or exit the application Launch Home screen While an application is running,pressing the button terminates the application Dispaly subtitles in the Live TV Display the teletext in the Live TV NOTES The Picture is Only for Reference. If the LED is red, the remote has failed to pair with the TV, please repeat the pairing procedure until succeeding. 6
Remote Control Installing Batteries in the Remote Control 1. Press and lift the back cover to open the battery compartment of the remote control. 2. Insert two AA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment with the cover. 1 2 3 NOTES Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire. Do not mix battery types or combine used batteries with new ones. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment. If you do not intend to use the remote control for a long time, remove the batteries. Pairing the Remote Control The First Method The Setup Wizard menu appears the first time you turn on the TV. Step of the remote pairing, press and hold down the and buttons simultaneously until the red LED turns on. When the red LED lights, release the buttons and wait for the TV to pair with the remote. The blue LED on the remote control will flash three times when the pairing is successfully completed. The Second Method 1.Enter Settings > Bluetooth to turn on Bluetooth. 2.Press and hold the and buttons for three seconds simultaneously. 3.Select Find nearby devices to search the remote control, and the remote control will appear in available devices, then press the [ / ] buttons to select the Remote Control and press the [OK] button to pair. 7
Specifications NOTE Features, appearance and specifications are subject to change without notice. Model Name 65T810UAD Size with base (mm) 1452 902 332 Size without base (mm) 1452 841 74 Weight with base (kg) 32 Weight without base (kg) 29.2 Active Screen Size(Diagonal) 65 inches Screen resolution 3840 2160 Sound Output (RMS) Power consumption Power supply 15W + 15W 260 W 100V - 240V ~ 50Hz/60Hz Colour System PAL NTSC SECAM Television System Environmental conditions Component mode VGA mode HDMI mode PAL B/G SECAM D/K DVB-T Temperature: 5 C - 45 C Humidity: 20% - 80% RH Atmospheric pressure: 86 kpa - 106 kpa 480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz 640 480, 800 600, 1024 768, 1280 1024 60Hz 480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 640 480, 800 600, 1024 768 3840 2160/24Hz, 3840 2160/25Hz, 3840 2160/30Hz, If you encountered difficulty when setting up your TV,we suggest you refer to the Trouble Shooting tips in the User Manual. 8