TAHOMA opengear frame The opengear Frame OG3-FR-CN Apantac opengear implementation uses the OG3-FR-CN frame that comes with cooling and Advanced GigE Network Control This frame has superior flexibility, power and control from the 3rd generation of the opengear platform. The broadcast world s first and only open-hardware platform, and your platform of choice for your broadcast infrastructure needs. opengear 3.0 is the evolution of the industry s first and only open hardware and software platform. The next generation opengear frame, OG3-FR combines function, flexibility and power with advanced features like high powered 450 watt redundant power supplies, Gigabit Ethernet access to every card slot, 20 opengear card slots, dedicated 21st and 22nd card slots for network control and internal reference distribution, and a front LCD display for easy frame, IP address and fault identification. Modular Frame Architecture The OG3-FR offers the flexibility of independent rear modules for connectivity to a wide array of interfaces such as BNC, twisted-pair audio, and fiber. The independent rear modules are available in different I/O configurations for select cards, including high density split rear modules allowing up to 20 independent opengear cards in the OG3 frame. Robust Power Supplies The OG3-FR can accommodate 2 front-loaded PS-OG3 power supplies. The split outside location of the power supplies makes installation a breeze when utilizing an alternate phase power source. A single 450 watt supply can fully power a loaded frame, and the addition of a second (optional) supply gives the frame full power redundancy. Each power supply contains an independent cooling fan, status LED, and a frontmounted power switch 96
Cooling The OG3-FR frame has been designed with an advanced cooling architecture with increased ventilation. Front door mounted cooling fans provide forced air cooling to all cards with front to back airflow. An intelligent fan controller adjusts fan speed with changes in power supply loading and temperature. The front door assembly can be removed without tools for quick and easy maintenance. Control The OG3-FR comes standard with Ethernet connectivity for basic configuration and monitoring of opengear cards through the DashBoard control system. An optional advanced networking card, the MFC-8322-N, adds an on-board Gigabit Ethernet switch, with GigE access to each of the 20 processing card slots. 97
TAHOMA opengear frame Gigabit Ethernet The opengear 3.0 frame offers optional gigabit Ethernet to every slot within the OG3-FR chassis, enhancing communication speed, and connection options to all opengear cards. The opengear 3.0 frame provides more communication options and flexibility to opengear card manufacturers; ultimately enhancing the opengear platform and experience. The 21-port Ethernet switch, built in to the frame s network control card, future-proofs the opengear 3.0 platform for users and opengear partners for years to come. Gigabit Ethernet is only available with the Advanced Network Control option. Features Robust 450 watt power supply with integral cooling Standard Ethernet connectivity Optional advanced Ethernet based frame controller with GigE to every slot 2RU frame houses up to 20 opengear cards Supports any mix of analog, digital, video and audio modules in the same frame Modular I/O panels for connector flexibility Removable front door for easy fan servicing Frames come standard with cooling Front LCD display for name, IP and fault identification 2 independent looping references with connection to each card slot Optional redundant power supply, hot-swappable for 24/7 operation 5-year warranty 98
Notes 99
opengear PLATFORM ACCESSORIES & OPTiONS RJ45-DB9: RS232 Adapter RJ50-DB9: GPI/O Adapter CAT6-FTP-15 -SR: Passive Receiver DVI-SR: Passive DVI Receiver SPP - Simple Preset Panel DB9 GPI Breakout RJ45DVIF - Convert TAHOMA RJ45 outputs to regular DVI connector. Commonly used with fiber optic extenders VGA/YPbPr-REC - VGA/YPbPr Receiver r -1-R - Long distance CATx DVI-1-LR - Long distance DVI CATx Receiver - extend signals to 115 ft at 1080p Receiver - extend signals to 115 ft at 1080p KEYPAD - Preset Recall Keypad 100
Notes 101
LE-Series OG-Micro-Q - Simple Compact Video Quad Split Key Features opengear 3.0 card-based form factor 4 auto-detect 3G/HD/SD-SDI, PAL/NTSC inputs Low power consumption - 12W Fixed Quad Split, each window can go full screen Single frame processing delay Decode up to 8 embedded audio per SDI input Display up to 8 audio meters per window Ethernet for configuration, dynamic labels & Tallies (TSL) Simultaneous /DVI and SDI outputs 2 GPI tallies per window 8 x GPI contacs, can be configured for tally or ASCII protocol Borders can be turned on or off One 32 characters label per window Text and background colors have adjustable transparency Safe area markers Visual Alarm tags for audio and video presence Dynamic (TSL) UMD/Label Stereo analog audio monitoring output and SDI embedded monitoring audio output 5 year limited warranty Rear Module Options (Occupies 2 Slots) OG-MicroQ-RM 4 x BNC Input 1 x BNC Output 1 x Output 1 x RJ50 for GPI/Tally 1 x 3-pin Connector for AA Out Standard Accessories RJ50 to DB9 (for GPI) DB9 to Terminal Block (for GPI) OG-MicroQ-RM-x 4 x BNC Input 1 x BNC Output 1 x RJ45 (Extended Output) 1 x RJ50 for GPI/Tally 1 x 3-pin Connector for AA Out Standard Accessories RJ50 to DB9 (for GPI) DB9 to Terminal Block (for GPI) 1 x 15 ft CAT6 cable 1 x RJ45 to (-SR) 1 x RJ45 to DVI (DVI-SR) BIG BUNNY CREW PROGRAM BIG BUNNY PREVIEW Optional Accessories for RM-x -1-R (Active Receiver that supports 1080p resolution up to 115 ft /35m) DVI-1-LR (Active DVI Receiver that supports 1080p resolution up to 115 ft /35m) VGA-Rec (VGA output receiver that supports 1080p resolution up to 35 ft /10m) OG-MicroQ-MB 102
In 2 In 4 In 2 In 4 In 1 In 3 In 1 In 3 Out GPI SDI OUT Reserved AA Out Extended Out GPI SDI OUT Reserved AA Out OG-MicroQ-RM OG-MicroQ-RMx How to Order OG-MicroQ-MB-SET-1: OG-MicroQ-MB + QG-MicroQ-RM OG-MicroQ-MB-SET-2: OG-MicroQ-MB + OG-MicroQ-RMx SPECIFICATIONS Total Windows 4 Output 1 x /DVI, 1 x SDI Inputs 3G/HD/SD-SDI/Composite (OG-MicroQ-RM) 800x480 to 1920x1200 (1080p) 50/59.94/60Hz Serial Digital SMPTE 424M 292M, 259M RJ45 (OG-MicroQ-RMx) Up to 35 feet with passive receiver Up to 115 feet with active receiver (option) Serial Digital SMPTE 424M, 292M, 259M SDI Matching the output resolution up to 3G Equalization 120m at 2.97 Gbps, 140m at 1.48 Gbps, 400m at 270 Mbps with Belden 1694A On Screen Display Borders, Labels, Tallies, Audio meters, Alarm tags, Safe area markers Return Loss > 15db up to 1.485 Gbps< > 10db up to 3G GPI 8 for tally or AXP (ASCII command) Embedded Audio SMPTE-272M-A IP 100 Base-T, TSL, AXP_Lite protocol Composite NTSC (SMPTE-170M), PAL (ITU624-2) Power 12W Signal Level 1V nominal DC Offset 0V, + - 0.1V Impedence Return Loss 75 ohm 40db up to 5MHz 103
LE-Series OG-Micro-Single - SDI to /DVI Converter Key Features opengear 3.0 card-based form factor Auto-detect 3G/HD/SD-SDI, PAL/NTSC inputs Low power consumption - 12W Single frame processing delay Decode up to 8 embedded audio per SDI input Display up to 8 audio meters per window Ethernet for configuration, dynamic labels & Tallies (TSL) Simultaneous /DVI and SDI outputs 2 GPI tallies per window 8 x GPI contacs, can be configured for tally or ASCII protocol Borders can be turned on or off One 32 characters label per window Text and background colors have adjustable transparency Safe area markers Visual Alarm tags for audio and video presence Dynamic (TSL) UMD/Label Stereo analog audio monitoring output and SDI embedded monitoring audio output 5 year limited warranty BIG BUN NY CREW Rear Module Options (Occupies 2 Slots) OG-Micro-Single-RM 1 x BNC Input 1 x BNC Output 1 x Output 1 x RJ50 for GPI/Tally 1 x 3-pin Connector for AA Out Standard Accessories RJ50 to DB9 (for GPI) DB9 to Terminal Block (for GPI) OG-Micro-Single-RM-x 1 x BNC Input 1 x BNC Output 1 x RJ45 (Extended Output) 1 x RJ50 for GPI/Tally 1 x 3-pin Connector for AA Out Standard Accessories RJ50 to DB9 (for GPI) DB9 to Terminal Block (for GPI) 1 x 15 ft CAT6 cable 1 x RJ45 to (-SR) 1 x RJ45 to DVI (DVI-SR) Optional Accessories for RM-x -1-R (Active Receiver that supports 1080p resolution up to 115 ft /35m) DVI-1-LR (Active DVI Receiver that supports 1080p resolution up to 115 ft /35m) VGA-Rec (VGA output receiver that supports 1080p resolution up to 35 ft /10m) 104 OG-MicroSingle-MB
SDI In SDI In SDI Out Loop Out SDI Out Loop Out Out GPI Loop Out AA In AA Out Extended Out GPI Loop Out AA In AA Out OG-Micro-Single-RM OG-Micro-Single-RMx How to Order OG-MicroSingle-MB-SET-1: OG-MicroSingle-MB + QG-MicroSingle-RM OG-MicroSingle-MB-SET-2: OG-MicroSingle-MB + OG-MicroSingle-RMx SPECIFICATIONS Total Windows 1 Output 1 x /DVI, 1 x SDI Inputs 3G/HD/SD-SDI/Composite (OG-Micro-Single-RM) Serial Digital SMPTE 424M 292M, 259M RJ45 (OG-Micro-Single-RMx) 800x480 to 1920x1200 (1080p) 50/59.94/60Hz Up to 35 feet with passive receiver Up to 115 feet with active receiver (option) Serial Digital SMPTE 424M, 292M, 259M SDI Matching the output resolution up to 3G Equalization 120m at 2.97 Gbps, 140m at 1.48 Gbps, 400m at 270 Mbps with Belden 1694A On Screen Display Borders, Labels, Tallies, Audio meters, Alarm tags, Safe area markers Return Loss > 15db up to 1.485 Gbps< > 10db up to 3G GPI 8 for tally or AXP (ASCII command) Embedded Audio SMPTE-272M-A IP 100 Base-T, TSL, AXP_Lite protocol Composite NTSC (SMPTE-170M), PAL (ITU624-2) Power 12W Signal Level 1V nominal DC Offset 0V, + - 0.1V Impedence Return Loss 75 ohm 40db up to 5MHz 105
LE-Series OG-Micro-UDX - Up/Down/Cross Converter Key Features opengear 3.0 card-based form factor Auto-detect 3G/HD/SD-SDI, PAL/NTSC inputs Low power consumption - 12W Single frame processing delay Supports up to 16 embedded audio per SDI input Ethernet for configuration Simultaneous /DVI and SDI outputs Stereo analog audio monitoring output embedded audio (8 channels) monitoring output SDI embedded audio (up to 16 channels) monitoring output 5 year limited warranty Rear Module Options (Occupies 2 Slots) OG-Micro-UDX-RM 1 x BNC Input 1 x BNC Output 1 x Output 1 x RJ50 for GPI 1 x 3-pin Connector for AA Out Standar Accessories RJ50 to DB9 (for GPI) DB9 to Terminal Block (for GPI) OG-Micro-UDX-RM-x 1 x BNC Input 1 x BNC Output 1 x RJ45 (Extended Output) 1 x RJ50 for GPI 1 x 3-pin Connector for AA Out Standar Accessories RJ50 to DB9 (for GPI) DB9 to Terminal Block (for GPI) 1 x 15 ft CAT6 cable 1 x RJ45 to (-SR) 1 x RJ45 to DVI (DVI-SR) Optional Accessories for RM-x -1-R (Active Receiver that supports 1080p resolution up to 115 ft /35m) DVI-1-LR (Active DVI Receiver that supports 1080p resolution up to 115 ft /35m) VGA-Rec (VGA output receiver that supports OG-MicroUDX-MB 106
SDI In In 2 In 4 SDI Out Loop Out In 1 In 3 Out GPI Loop Out AA In AA Out Extender Out GPI SDI OUT Reserved AA Out OG-Micro-UDX-RM OG-Micro-UDX-RMx How to Order OG-MicroUDX-MB-SET-1: OG-MicroUDX-MB + QG-MicroUDX-RM OG-MicroUDX-MB-SET-2: OG-MicroUDX-MB + OG-MicroUDX-RMx SPECIFICATIONS Total Windows 1 Output 1 x /DVI, 1 x SDI Inputs 3G/HD/SD-SDI/Composite (OG-Micro-UDX- RM) Serial Digital SMPTE 424M 292M, 259M RJ45 (OG-Micro-UDX- RMx) 800x480 to 1920x1200 (1080p) 50/59.94/60Hz Up to 35 feet with passive receiver Up to 115 feet with active receiver (option) Serial Digital SMPTE 424M, 292M, 259M SDI Matching the output resolution up to 3G Equalization 120m at 2.97 Gbps, 140m at 1.48 Gbps, 400m at 270 Mbps with Belden 1694A On Screen Display Borders, Labels, Tallies, Audio meters, Alarm tags, Safe area markers Return Loss > 15db up to 1.485 Gbps< > 10db up to 3G GPI 8 for tally or AXP (ASCII command) Embedded Audio SMPTE-272M-A IP 100 Base-T, TSL, AXP_Lite protocol Composite NTSC (SMPTE-170M), PAL (ITU624-2) Power 12W Signal Level 1V nominal DC Offset 0V, + - 0.1V Impedence Return Loss 75 ohm 40db up to 5MHz 107
LE-Series OG-Micro-4K - UHD/4K down Converter Key Features opengear 3.0 card-based form factor 4 3G-SDI inputs Low power consumption - 12W Single frame processing delay Decode up to 16 embedded audio per SDI input Display up to 8 audio meters per window Ethernet for configuration, dynamic labels & Tallies (TSL) Simultaneous /DVI and SDI outputs 2 GPI tallies per window 8 x GPI contacs, can be configured for tally or ASCII protocol One 32 characters label per window Text and background colors have adjustable transparency Safe area markers Visual Alarm tags for audio and video presence Dynamic (TSL) UMD/Label Stereo analog audio monitoring output and SDI embedded monitoring audio output 5 year limited warranty Rear Module Options OG-Micro-4K-RM 4 x BNC Input 1 x BNC Output 1 x Output 1 x RJ50 for GPI/Tally 1 x 3-pin Connector for AA Out OG-Micr-4K-RM-x 4 x BNC Input 1 x BNC Output 1 x RJ45 (Extended Output) 1 x RJ50 for GPI/Tally 1 x 3-pin Connector for AA Out 1 x 15 ft CAT6 cable 1 x RJ45 to (-SR) 1 x RJ45 to DVI (DVI-SR) Option -1-R (Active Receiver that supports 1080p resolution up to 115 ft /35m) DVI-1-LR (Active DVI Receiver that supports 1080p resolution up to 115 ft /35m) VGA-Rec OG-Micro4K-MB 108
In 2 In 4 In 2 In 4 In 1 In 3 In 1 In 3 Out GPI SDI OUT Reserved AA Out Extender Out GPI SDI OUT Reserved AA Out OG-Micro-4K-RM OG-Micro-4K-RMx How to Order OG-Micro4K-MB-SET-1: OG-Micro4K-MB + QG-Micro4K-RM OG-Micro4K-MB-SET-2: OG-Micro4K-MB + OG-Micro4K-RMx SPECIFICATIONS Total Windows 4 Output 1 x /DVI, 1 x SDI Inputs 3G/HD/SD-SDI/Composite (OG-Micro-4K- RM) Serial Digital SMPTE 424M 292M, 259M RJ45 (OG-Micro-4K- RMx) 800x480 to 1920x1200 (1080p) 50/59.94/60Hz Up to 35 feet with passive receiver Up to 115 feet with active receiver (option) Serial Digital SMPTE 424M, 292M, 259M SDI Matching the output resolution up to 3G Equalization 120m at 2.97 Gbps, 140m at 1.48 Gbps, 400m at 270 Mbps with Belden 1694A On Screen Display Borders, Labels, Tallies, Audio meters, Alarm tags, Safe area markers Return Loss > 15db up to 1.485 Gbps< > 10db up to 3G GPI 8 for tally or AXP (ASCII command) Embedded Audio SMPTE-272M-A IP 100 Base-T, TSL, AXP_Lite protocol Composite NTSC (SMPTE-170M), PAL (ITU624-2) Power 12W Signal Level 1V nominal DC Offset 0V, + - 0.1V Impedence Return Loss 75 ohm 40db up to 5MHz 109
LE-Series OG-US-3500 - Universal scaler w/genlock Key Features opengear 3.0 card-based form factor Supports /DVI/YPbPr/CVBS input Stereo analog audio input Supports Genlock via opengear frame Low power consumption - 15W Dual SDI outputs Output supports 720p, 480/576p, 480i/576i, 1080i, 1080p Output frequency in 23.98, 24, 25, 29.97, 30, 50, 59.94, 60Hz 5 year limited warranty How to Order OG-US-3500-SET-1: OG-US-3500-MB + QG-US-3500-RM Rear Module OG-US-3500-RM 1 x DVI-U Input 1 x Analog Audio Input 1 x BNC input for Genlock 1 x BNC output for Genlock loopout 1 x RS-232 Accessorries 1 x VGA-DVI-U Adapter 1 x -DVI-U Adapter 1 x Ypbpr-DVI-U Adapter SPECIFICATIONS Inputs /DVI/VGA/YPbPr/CVBS Output 2 x SDI Audio Input Stereo Analog SDI 720p, 480/576i, 480/576p, 1080i, 1080p in 23.98, 24. 25. 29.97, 30, 50, 59.94, 60Hz Genlock Analog black burst from the opengear frame IP 100 Base-T RS232 AA Input DVI-U Input IP --DVI-U Adapter VGA--DVI-U Adapter SDI OUT 2 SDI OUT1 OG-US-3500-RM DVI-U-YPbPr Adapter 110
OG-US-3000 - Universal scaler Key Features opengear 3.0 card-based form factor Supports /DVI/YPbPr/CVBS input Stereo analog audio input Low power consumption - 15W Dual SDI outputs Output supports 720p, 480/576p, 480i/576i, 1080i, 1080p Output frequency in 23.98, 24. 25. 29.97, 30, 50, 59.94, 60Hz 5 year limited warranty How to Order OG-US-3000-SET-1: OG-US-3000-MB + QG-US-3000-RM Rear Module Options OG-US-3000-RM 1 x DVI-U Input 1 x Analog Audio Input 1 x BNC input for Genlock 1 x BNC output for Genlock loopout 1 x RS-232 Accessorries 1 x VGA-DVI-U Adapter 1 x -DVI-U Adapter 1 x Ypbpr-DVI-U Adapter SPECIFICATIONS Inputs /DVI/VGA/YPbPr/CVBS Output 2 x SDI Audio Input Stereo Analog SDI 720p, 480/576i, 480/576p, 1080i, 1080p in 23.98, 24. 25. 29.97, 30, 50, 59.94, 60Hz Genlock N/A IP 100 Base-T RS232 AA Input DVI-U Input IP --DVI-U Adapter VGA--DVI-U Adapter SDI OUT 2 SDI OUT1 OG-US-3500-RM DVI-U-YPbPr Adapter 111
LE-Series OG-DA-HDTV-SDI - to SDI Converter Key Features opengear 3.0 card-based form factor 1 x input 1 x RJ45 receiver input 1 x loop out Low power consumption - 12W Built-in simple multi-format pattern generator Built-in interlacer - change 1080p to 1080i Raclocking DA outputs Compatible for 3G/HD/SD-SDI Cable reach up to 120 meters for 3G, 140 for HD-SDI 5 year limited warranty How to Order OG-DA-HDTV-SDI-SET-1: OG-DA-HDTV-SDI-MB + QG-DA-HDTV-SDI-RM Rear Module Options OG-DA-HDTV-SDI-RM 1 x Input 1 x RJ-45 Input (Extended Input 1 x Looping Output 2 x BNC outputs (Relocked SDI out) SPECIFICATIONS Inputs, Extended with RJ45 Output 2 x Reclocked SDI Analog Audio Output 35 mm phone jack Loopout 1 x Extender Input In SDI OUT 2 Loop out SDI OUT 1 OG-DA-HDTV-SDI-RM 112