Knowledge Base & Application Notebook

2 0 1 2 Knowledge Base & Application Notebook CCTV Analog CCTV IP Network CCTV Integrated Solutions Video over UTP Kit Coming Soon! UTP CAT5 / 6e MI LCD CAMERA LINK -SDE-UTPT Video over UTP Transmitter 1x2 Distribution Amplifier / Extender 100m~200m / 300ft~650ft * -SDE-UTPR Video over UTP Receiver 1x2 Distribution Amplifier / Extender 1x2 Repeater & Distribution Amplifier to MI Converter + Data Transmit over Coax Kit Transmission over Ethernet Kit www.aas.com.tw Copyright 2012 by AAS Technology OEM

About Us AAS Technology was founded to provide CCTV Integrated Solutions via coaxial cable transmission to customers as well as offering OEM services that was of high quality and affordable prices. There are not enough OEM manufacturers out there who are able to bring that kind of value to their customers. We feel it is our duty to bring that value directly to you! We have: An R&D department in Taiwan Some Key Components are from U.S.A and Taiwan Manufacturer in China Sales offices and warehouses in the United States and Taiwan With manufacturing facilities in China and some of the components made in the U.S., you can be assured that each item is made and handled with care. All products are shipped from our warehouse in San Leandro, California. We want to be your first and only choice. Our Technical Department has an extensive amount of knowledge and training. They know the ins and outs of CCTV and are willing and ready to assist you with your needs. Our company stands for providing the highest quality products at the lowest competitive prices and providing excellent customer service at the same time. We never want to leave a customer with a sense of wonder, not knowing information about a particular product or leaving a customer dissatisfied with a product that they purchased. That s why we personally deal with any problems that may arise along with RMAs. What can we do for you? A) AAS Technology product with generic product code. B) AAS Technology product with your product code and AAS logo. C) OEM with your product code and your logo. D) OEM with your product code, your logo and your own exclusive affordable molding. For small quantities, it is recommended that you start with A. As your business grows, you can upgrade to B. If you like AAS products and once your business is steady, you can proceed to C or D. AAS Technology is an affiliate of UTP Balun. R&D Dept. - Q.C. Test Equipment Facility in China Warehouses - California, U.S.A. On-going Testing for Quality Control Eye Pattern 0.11 Eye Pattern 0.00 Eye Pattern 0.23 Eye Pattern 0.28 USA Sales & Warehouse 5500 Stewart Ave., Suite 300, Fremont, CA 94538 Tel: 1 (510) 279-9992 / 1 (800) 916-8783 Fax: 1 (510) 279-9966 Taiwan - R&D Guiyang St. Sec 2, 160-1 4 FL, Taipei, Taiwan China - UTP Balun Factory No 610, Building 212, Tairan S&T Park, Futian District, Shenzhen 518040, China Tel: (86) 755-33654966 *Specifications and appearance are subject to change without notice. www.aas.com.tw sales@aas.com.tw - ii -

The P.I.C. Product Item Code is a universal code used for Purchase Orders and Performa Invoices. This prevents product code mistakes. Index with Product Item Code (P.I.C.) CCTV Integrated Solutions - Series SD-1 SD//3G- 1x2 Distribution Amplifier & Extender... 2 SD-2 SD//3G- 1x2 Repeater & Distribution Amplifier... 2 SD-8 SD//3G- to MI Converter... 2 SD-6, SD-6a, SD-6b PTZ Camera Video + Data RS-485 Transmission over Coax Kit... 3 SD-7 Repeater... 3 SD-11, SD-11a, SD-11b SD//3G- Transmission Over Ethernet Kit... 3 SD-9 1 to 4 Distribution Amplifier... 4 SD-12, SD-12a, SD-12b Video over UTP Kit... 4 SD-3 Mini SD//3G- Pattern Generator w/ Serial Control... 4 SD-4 SD//3G- Pattern Generator... 5 SD-5 SD//3G- 5.7 LCD Monitor w/ MI Output... 5 SD-10 SD//3G- Surge Protector... 5 RG6 & RG59 BNC Crimp On Connector... 5 PoE / Ethernet over Coax N-1, N-1a, N-1b PoE over Coax Extender Kit... 6 N-3, N-3a, N-3b Ethernet over Coax Extender Kit... 6 N-4, N-4a Ethernet over Coax Extender Pair... 7 Video & Power over Coax (VPoC) N-41C VPoC Step Down 12V DC Receiver - Camera Side... 7 N-42-1 1-CH Video & Power over Coax Server... 7 N-43-4 4-CH Video & Power over Coax Server... 7 N-44-8-120, N-44-8-220 8-CH Video & Power over Coax 24V DC Server... 7 N-45-16-120, N-45-16-220 16-CH Video & Power over Coax 24V DC Server... 7 CCTV Service Test Monitor T-82 3.5 LCD CCTV Service Viewer... 8 T-83 All-in-One Touch Screen Service Tester... 8 Knowledge Base Eye Pattern WaveTest Report... 9-10 IMPORTANT NOTE: Cable & Connector for Camera In order to achieve the Best Quality and Long Range coax cable run of up to 200m / 600ft, you will need: 1. Good Quality Cable We suggest using RG6 Belden 1694A Low Loss Serial Digital Coax because RG6 cables have better grounding than RG59 cables. RG6 is for Digital Signal and RG59 is for Analog Signal. 2. Good Quality BNC Connectors Contact Plating Gold plated pins provide exceptional conductivity. 3. Good Quality Installation Do not over cut the braid becuase it will affect the grounding. The image will have lines and noise. Bare Copper Jacket Braid Shielding Dielectric Conductor Contact Plating Gold plated pin Key Components Note The key components are listed by the parts manufacturer and are subject to change without notice. - 1 - Copyright 2012 AAS Technology. All rights reserved.

Key Components Important Note: Cable & Connector for Camera CCTV Integrated Solutions - Series Uses Coaxial cable to transmit video signal These devices are specially designed for cameras for Surveillance industry. This Standard is more Economical than Broadcasting industry standards. SD//3G- 1x2 Distribution Amplifier & Extender -SDE-122 SD-1 Data Rates: 270/1483/1485 Mbps Signal Type: SMPTE 292M, SMPTE 259M, 1.5Amp Economical Type -SDE-122 CAMERA LINK 1x2 Distribution Amplifier / Extender SD//3G- 1x2 Distribution Amplifier / Extender y y m* m = up to 90m 3G-, 1080p, 30 150m -, 1080i, 720p 200m SD-, 480i X m * X m = up to 120m 3G-, 1080P, 30 150m -, 1080i, 720p 300m SD-, 480i * See page 9-10 for Test Report SD-1 SD//3G- 1x2 Repeater & Distribution Amplifier with Re-clocking Function -SDE-122R -SDE-122R SD-2 Max data rate up to 1.485 Gbps TV Compatible Re-clocking Function -- unlimited repeater connection Multi-standard operation: (SMPTE 259M/344M) & - (SMPTE 292M) - & Input Indicator LEDs with locking terminal M21315 (/SD-) Auto-rate Reclocker Made in USA by Mindspeed Technologies Multi-Rate Adaptive Cable Equalizer Made in USA by Mindspeed & Gennum Multi-Rate Dual Slew-Rate Cable Driver Made in USA by Mindspeed & Gennum & National Semiconductor Data Communication IC Made in USA by MAXIM DC/DC Converter Made in Taiwan by Richtek It takes one input then re-clocks and equalizes the signal and distributes it to two idential outputs -SDE-122R -SDE-122R -SDE-122R CAMERA LINK SD//3G- 1 to 2 Repeater & Distribution Amplifier With Re-clocking Function LINK SD//3G- 1 to 2 Repeater & Distribution Amplifier With Re-clocking Function LINK SD//3G- 1 to 2 Repeater & Distribution Amplifier With Re-clocking Function Requires Power * See page 9-10 for Test Report Up to X m * SD-2 SD//3G- to MI Converter -SD-MI SD-8 Integrates transmitter and MI demodulator which expediently converts signal to MI signal Support input format: 480i, 576i, 720p50/60, 1080p24/25/30, 1080i 50/60, 1080p50/60 Support SMPTE 425M (A level and B level) SMPTE 424M, SMPTE 292M, SMPTE 259M-C 1080P -SD-MI Multi-Rate Adaptive Cable Equalizer Made in USA by Gennum Multi-Rate Automatic Reclocker Made in USA by Gennum Multi-Rate Dual Slew-Rate Cable Driver Made in USA by Mindspeed & Gennum SPD Made in USA by Bourns MI ESD Protection Made in USA by Semtech DC/DC Converter Made in Taiwan by Richtek -SD-MI SD//3G- to MI Converter MI -SD-MI MI LCD SD-8 *Specifications and appearance are subject to change without notice. - 2 -

With RS485 Control Channel With RS485 Control Channel Including Link Power and Control Channel Including Link Power and Control Channel CCTV Integrated Solutions - Series SD//3G- Transmission over Ethernet Kit -SDE-SEDK Supports various formats of 1080p 30/25/24, 1080i, 1080i 50, 720p 60/50, 480i/p, 576i/p SD-11 -SDE-SE / -SDE-SD Encoder H.264 High Profile Compression Adjustable encoding code rate Supports 2-way voice H.264 Video Codec Made in USA by MAXIM Multi-Rate Adaptive Cable Equalizer Made in USA by Gennum Multi-Rate Automatic Reclocker Made in USA by Gennum Multi-Rate Dual Slew-Rate Cable Driver Made in USA by Mindspeed & Gennum SPD Made in USA by Bourns MI ESD Protection Made in USA by Semtech DC/DC Converter Made in Taiwan by Richtek -SDE-SE Decoder Intelligent Network delay controlling Image enhancement & fault-tolerant technology -SDE-SE SD-11a -SDE-SD SD-11b Encoder Decoder -SDE-SD -SDE-SE 1080P SD/- H.264 Encoder SD/- H.264 Encoder Switch LAN or WAN Switch -SDE-SD SD/- H.264 Decoder SD/- H.264 Decoder SD-11a / SD-11b PTZ Camera Video + Data RS-485 Transmission over Coax Kit -SDE-VDK SD-6 Adaptive Equalizer returns the signal to its original amplitude and modulation Re-cloking function resynchronizes the signal Cable Driver to re-transmit the signal with its original characteristics Up to 5 repeaters -- Requires 16V~19V DC to power all 5 repeaters & Tx -SDE-VDT / -SDE-VDR / -SDE-VDP Multi-Rate Adaptive Cable Equalizer Made in USA by Mindspeed & Gennum Multi-Rate Automatic Reclocker Made in USA by Mindspeed & Gennum Multi-Rate Dual Slew-Rate Cable Driver Made in USA by Mindspeed & Gennum & National Semiconductor Data Communication IC Made in USA by MAXIM DC/DC Converter Made in Taiwan by Richtek Coax also provide power from SDE-VDR to SDE-VDT and SDE-VDP -SDE-VDT SD-6b -SDE-VDR SD-6a Tx Rx PTZ Camera RS-485 IN -SDE-VDT SD//3G- Repeater [Camera Side] OUT ACT RS485 PWR A+ B- GND Power for -SDE-VDT, -SDE-VDR, -SDE-VDP only IN -SDE-VDR SD//3G- Repeater [DVR/NVR Side] OUT ACT RS485 PWR A+ B- GND RS-485 -SDE-VDT -SDE-VDR SD-6a / SD-6b Repeater -SDE-VDP SD-7 Adaptive Equalizer to return the signal to its original amplitude and modulation Re-cloking function resynchronizes the signal Up to 5 repeaters -- Requires 16V~19V DC to power all 5 repeaters & Tx Power for -SDE-VDT, -SDE-VDR, -SDE-VDP only PTZ Camera RS-485 IN -SDE-VDT SD//3G- Repeater [Camera Side] OUT ACT RS485 PWR A+ B- GND IN -SDE-VDP SD//3G- Repeater In-line] OUT ACT PWR IN -SDE-VDR SD//3G- Repeater [DVR/NVR Side] OUT ACT RS485 PWR A+ B- GND RS-485 -SDE-VDT -SDE-VDP -SDE-VDR SD-7-3 - Copyright 2012 AAS Technology. All rights reserved.

Key Components Important Note: Cable & Connector for Camera CCTV Integrated Solutions - Series 1 to 4 Distribution Amplifier -SD-124 SD-9 High Resolution Digital Multiplexer (- / MI Input) Multi-Video & Simultaneous Output 1920x1080, 1280x1024, 1280x720, 1024x768 Multi Language Support; Auto System Recovery Control Screen Mode via LAN, RS-485, RS-232C -SD-124 Multi-Rate Adaptive Cable Equalizer Made in USA by Mindspeed & Gennum Multi-Rate Automatic Reclocker Made in USA by Mindspeed & Gennum Multi-Rate Dual Slew-Rate Cable Driver Made in USA by Mindspeed & Gennum DC/DC Converter Made in Taiwan by Richtek -SD-124 3 4 -SD-124 1080P 1:4 SD//3G- DA 1 2 SD-9 Video over UTP Kit -SDE-UTPK SD-12 -SDE-UTPT SD-12a -SDE-UTPR SD-12b Coming Soon! Tx Rx -SDE-UTPT -SDE-UTPR UTP CAT5 / 6e MI LCD CAMERA LINK -SDE-UTPT Video over UTP Transmitter 1x2 Distribution Amplifier / Extender -SDE-UTPR Video over UTP Receiver 1x2 Distribution Amplifier / Extender SD-12a / SD-12b * The distance depends on the quality of the signal from the camera source and also the Coax Cable & Connector Mini SD//3G- Pattern Generator with Serial Control Tester -PG-RS232 SD-3 For Installers to Test and Troubleshoot Cameras, Connectors, Cables, etc. Advanced pattern generator with multi-format (3G//SD) and multi-pattern support Offers the most common patterns, SMPTE colorbars and checkfield, for testing thru front panel buttons Transmission distance up to 60m / 190ft 3G-, 150m / 500ft -, 300m / 1000ft SD-, 4A FIRMWARE UPDATE OR -SD-MI Use software to send pattern command to generate image to or MI monitor -PG-RS232 -SD-MI SD//3G- to MI Converter MI LCD SD-3 *Specifications and appearance are subject to change without notice. - 4 -

CCTV Integrated Solutions - Series SD//3G- Pattern Generator with MI Input Tester -PG-MI SD-4 Advanced pattern generator with multi-format (3G//SD) and multi-pattern support Bypasses MI input and allows users with more testing patterns for connected display Transmission distance up to 60m / 190ft 3G-, 150m / 500ft -, 300m / 1000ft SD-, 4A MI -PG-MI SD-4 SD//3G- 5.7 LCD Monitor with MI Output Tester -LCD57-MI SD-5 Shows the resolution of the signal, and analyze the fail and error rate of incoming signal Display up to 8 channel audio bars to indicate the embedded digital audio channel in stream Built-in advanced scaler Versatile IR Remote Control, 4A MI LCD FIRMWARE UPDATE MI /CVBS -LCD57-MI SD-5 - Surge Protector -SD-SP SD-10 According wih the standards of GB18802.1, GB/T 18802.21 Transmission Rate: 270M~1.485G Resisting Surge above 6KV Discharging Current can achieve 10KA Reaction Speed is 1 us Outstanding - Video Output Signal Quality Less than 0.05UI Superposition Jitter Excellent Eye Pattern performance Transmission rate: 270M~1.485G Ta 1us, Up 10KV, Isn 5KA -SD-SP SD SPD Made in USA by Bourns TVS Made in USA by Bourns SD-10 CCTV Integrated Solutions - Accessories RG6 & RG59 BNC Crimp On Connector -SDRG59C HH-SDRG6C Contact Plating Gold plated pins provide exceptional conductivity Plating hole ensures consistent gold deposition throughout all pin surfaces 75 ohm impedance prevents ghosting and enhances performance Contact Plating Gold plated pin - 5 - Copyright 2012 AAS Technology. All rights reserved.

PoE / Ethernet Over Coax PoE over Coax Extender Kit POEOC-15K N-1 10/100Mbps 15W Connect Ethernet devices such as computers or PoE IP Camera. POEOC-15-D has PoE function POEOC-15-D Coaxial Ethernet Signal and DC Power POEOC-15-HOST POEOC-15-HOST N-1a Ethernet Switch POEOC-15-D N-1b PoE Midpsan POEOC-15-HOST Host PoE Over Coax Extender DATA / 15W af Coaxial Cable 200m~300m / 600ft~900ft 15W af DATA / PoE Over Coax Extender Device POEOC-15-D Power LED OR Power LED PoE IP Camera Connect Ethernet devices such as PoE Ethernet Switch or PoE Injector and Ethernet Switch. POEOC-15-HOST power is offered by PoE PoE Ethernet Switch N-1 / N-1a / N-1b Ethernet over Coax Extender Kit EOC-100K N-3 10/100Mbps Up to 300m / 900ft 24V DC Camera Power Coaxial Ethernet Signal 200m~300m / 600ft~900ft EOC-100-HOST N-3a EOC-100-D N-3b 24V DC IP Camera DATA / Ethernet Over Coax Extender 24V DC DATA / Ethernet Over Coax Extender Ethernet Switch EOC-100-D Device EOC-100-HOST Host EOC-100-D EOC-100-HOST N-3 / N-3a / N-3b Ethernet over Coax Extender Kit EOC-10P N-4 10/100Mbps Up to 300m / 900ft Camera Power IP Camera Network Cable EOC-10 EOC-10 Network Cable EOC-10 N-4a EOC-10 N-4a Ethernet Switch Ethernet Over Coax Extender Ethernet Over Coax Extender EOC-10 EOC-10 Coaxial Ethernet Signal 250m / 820ft @ RG6 200m / 650ft @ RG59 N-4 / N-4a *Specifications and appearance are subject to change without notice. - 6 -

Video & Power Over Coax (VPoC) VPoC Step Down 12V DC Receiver - Camera Side VPOC2412DC N-41C A C 12V DC 16V DC 18V DC 22V DC Coax Cable B 24V DC 110V or 220V AC CAMERA VPOC2412DC 300m / 1000ft VPOC24DC-01 DVR DVR A = Input 110V or 220V AC B = Output 24V DC C = Input 12V DC N-41C 1CH / 4CH / 8CH / 16CH Video Power over Coax Server VPOC24DC-01 N-42-1 VPOC24DC-04 N-43-4 120V~220V AC VPOC24DC-08-120 N-44-8-120 120V AC VPOC24DC-08-220 N-44-8-220 220V AC VPOC24DC-16-120 N-45-16-120 120V AC VPOC24DC-16-220 N-45-16-220 220V AC Can run Coax Cable up to 300m / 1000ft without power drop Easy to upgrade to PTZ camera with existing 18/2 power wire to become data RS485 No need to lay AC line and install power adapter to camera 1 cable for power and video transmission, reducing the material cost Enhanced anti-interference capability 1CH N-42-1 4CH 8CH 16CH Front Front Front Rear Rear N-43-4 N-44-8-120 N-44-8-220 Rear C 12V DC 18V DC 24V DC N-45-16-120 N-45-16-220 Under 300m / 1000ft VPOC24DC-04 VPOC24DC-08 VPOC24DC-16 CAMERA VPOC2412DC x4 / x8 / x16 Coax Cable 110~220V AC A = Input 110V or 220V AC B = Output 24V DC C = Input 12V DC 110V or 220V AC A DVR DVR - 7 - Copyright 2012 AAS Technology. All rights reserved.

OSD 12V DC A/V/P USB CCTV Service Test Monitor 3.5 LCD Service Viewer LCD35SV T-82 Provides power to 12V DC Camera which makes Troubleshooting easier! PAL / NTSC standard automatic detection Display format RGB 320 x 240 6 hours operation time Provide power to 12V DC / 300mA camera Audio and video input USB universal charging interface Battery save sleep mode - 3 minutes Lithium Battery: 3.7V DC, 2200mA a b c d Main Unit Video/Audio/Power Cable Video/Audio Cable RCA to BNC All accessories in one carry bag! e f g h i Power Adaptor Car Charger USB Cable for Charging Carry Bag Manual Your Logo on Boot Screen! 4 seconds MOQ 50 Power output to camera Video CHARGER ON/OFF SWITCH A/V Video Loss = Camera Malfunction With Video Image and Power Issues = 1. Power drop after long cable run...or 2. Something is wrong with the Cable...OR 3. Something is wrong with the Video Connector / Balun Video Loss CCTV Service Viewer SYSTEM RESET T-82 All-in-One Touch Screen Service Tester LCDA-1 T-83 Analog + IP + PTZ camera tester 3rd Party IPCAM support (ONVIF, AXIS, Vivotek, ACTi, Sony, Panasonic, Arecont Vision, IQeye.more) Embedded GPS for accurate location PoE measurement: current and voltage High power PoE support (25.5W) CGI command configuration Bandwidth calculation All-in-One Similar Reference: T8414 Installation Display Left Side View Right Side View PoE to IP Camera LAN to Switch Micro SD Slot UTP Cable Tester RS-485 Audio Out PoE On/Off USB Slot Charger Audio In Power On/Off T-83 *Specifications and appearance are subject to change without notice. - 8 -

Knowledge Base: Eye Pattern Wave Test Report Test Instrument : PHABRIX SxE Eye and Jitter Cable: BELDEN 1694A-RG6 A: Generate Signal B: Signal Input Eye Pattern Wave Test Report 1x2 Distribution Amplifier & Extender Test Device Cable B Cable A Eye Pattern Video Direct 1 M 0.11 Yes Direct 150 M 0.00 No Video -SDE-122R [with 1 M 150 M 0.23 Yes reclocking] -SDE-122 [W/O reclocking] Date: Jan 6, 2012 1 M 150 M 0.28 Yes A 1m BELDEN 1694A RG-6 cable was attached to the output of the Phabrix SxE video signal test device to generate a 3G- pattern, and to the input which receives the signal and analyses the eye pattern and jitter of the signal. (Fig. 1) A snapshot was taken of the result of this control test. (Fig. 2) Eye Pattern 0.11 B Jitter: the undesired deviation from true periodicity of an assumed periodic signal in electronics and telecommunications, often in relation to a reference clock source. Eye Pattern: A diagram display on oscilloscopes used to show and analyze digital signals. The number 0.11 on the top is the Jitter rate. A signal for a cable this short should be no more than 0.2UI Next a 150m BELDEN 1694 RG-6 cable was attached the output and input of the Phabrix SxE (Fig. 4) and another snapshot was taken of the result. (Fig. 5) A B Eye Pattern 0.00 The signal that came from the test device did not reach the receiving end, since the distance of 150m was too long and the signal had attenuated so much, the meter could not produce an eye pattern or analyze the jitter. 0.00 UI - 9 - Copyright 2012 AAS Technology. All rights reserved.

Knowledge Base: Eye Pattern Wave Test Report The -SDE-122R video extender (with re-clocking) was attached at the downstream end of the 150m cable and a 1m cable attached the -SDE-122R to the input of the Phabrix SxE. (Fig. 6) The amplified signal can be seen below. (Fig. 7) A B Reclocking: Can be thought of as "refreshing" or "regenerating" a signal. Eye Pattern 0.23 When a clock signal is run over a long length of cable it can suffer degradation. If this degradation becomes too severe the clock signal can be rendered unusable. To prevent this, a reclocking device can be inserted in the signal chain. This device uses the incoming signal as a template to regenerate a new signal with the same characteristics. J*st as y#u ar st!l*&ble to re*d th)s garbled sentence and correct it in your head, a reclocking device can read incoming clock signals with missing information and rewrite them in their originally intended form. The test device now has a usable signal that can be analyzed, and as you can see, only has a jitter of 0.23UI The following test is using -SDE-122 (without reclocking) A B Eye Pattern 0.28 Even without the reclocking function, the Extender is able to amplify the signal and let the test equipment detect and analyze the signal whereas before, it could not through this length of cable. A jitter of 0.28UI NOTE: Why use Phabrix SxE instead of using an Camera for this test? Because the cameras on the market do not have a standard quality or uniform signal whereas the extender will boost an camera signal, this test used a uniform signal from the test device to show jitter readings through the different lengths of cable and how well the extender devices can improve the signal. *Specifications and appearance are subject to change without notice. - 10 -