Ericsson RX800 Advanced Modular Receiver Broadcasters need to deploy receivers for many different tasks in many different operational circumstances. Ericsson s RX800 receiver offers ultimate operational flexibility by providing capability for decoding of all video formats and total connectivity for all transmission mediums via a comprehensive choice of options. Each individual RX800 unit can be easily configured and tailored to the user s precise needs. This means an optimal balance of functionality and cost can be achieved, resulting in a unit with all the required features without the additional expense of superfluous connectivity or functionality. The RX800 offers a vast and sophisticated array of configuration possibilities allowing it to cover a broad range of applications. The RX800 can be tailored to standard definition or high definition uses with MPEG- or MPEG- decode technology in both ::0 and :: modes as well as JPEG 000 decode capability. Connectivity into the receiver is achieved with satellite, IP, ATM and ASI options. PRODUCT OVERVIEW Total Connectivity The RX800 Advanced Modular Receiver offers the user total connectivity through the capability to provide satellite, IP and ASI transport stream inputs, all within a single unit. With this flexibility the user is confident that their initial receiver investment is capable of adapting to a fast changing industry. Best Efficiency The RX800 Advanced Modular Receiver offers ultimate bandwidth efficiency for satellite transmissions by incorporating the option for the new DVB-S Extensions (DVB-SX) standard. DVB-SX offers up to 0% bit rate efficiency for typical video applications, which when combined with MPEG- transmission means RX800, as part of an Ericsson end-to-end Contribution or Distribution system can offer more channels or better quality video or less bandwidth occupancy than any other competing solution. Multi-format Decoding As a true multi-format decoder, the RX800 can offer MPEG- AVC ::0 High Definition decoding allowing broadcasters to reap the benefits from the 50% bit rate savings compared to MPEG-; and with more and more contribution feeds also making a similar move from MPEG- to MPEG- AVC in the :: world the RX800 also meets those needs. BASE UNIT FEATURES RX800 Advanced Modular Receiver (RX800/BAS, FAZ 0 03/) The following features are available as standard: x ASI input transport stream input Front panel control Web browser and SNMP remote control Alarm relay and SCTE 35 controlled contact closures for ad-insertion signaling All frequently used single service decryption systems Unit can be equipped with the following capability via additional licence keys: MPEG- and MPEG- ::0 decode capability MPEG- ::, MPEG- :: and JPEG 000 capability High bit rate MPEG- ::0 capable Low Latency capable Many other sophisticated, additional hardware and software based modules available as options Highest Quality The RX800 Advanced Modular Receiver has the capability to provide the ultimate feature-set of MPEG- HD, :: 0-bit 080p50/60 allowing broadcasters to achieve the highest possible video quality. The RX800 also has the ability to enable compatibility for all broadcasters by deriving and outputting high quality 080i, 70p or SD video from this reference format. Lowest Latency Broadcasters are increasingly demanding lowest latency for contribution and news applications. Ericsson offers the complete low latency suite of tools for the user whether that be high quality JPEG 000 decoding for contribution over fiber applications or low latency MPEG- :: and ::0 decoding for satellite applications. Why Ericsson The Ericsson RX800 Advanced Modular Receiver heads its class as an IRD offering the perfect balance of industry leading capability, flexibility and affordability. 03-0-v3
Ericsson RX800 Advanced Modular Receiver INPUT OPTIONS The RX800 Advanced Modular Receiver has a single ASI input as standard and can be configured with one additional choice of inputs type. Satellite Input Options The RX800 satellite input modules come with DVB-S QPSK support as standard. The unit can optionally be licensed to support the new highly efficient DVB-S satellite transmission standard. Second Generation DVB-S Capable Satellite Demodulator (RX800/HWO/DVBS/, FAZ 0 03/6) x L-band inputs DVB-S QPSK demodulation DVB-S QPSK, 8PSK, 6APSK, 3APSK demodulation with license keys DVB-S multi-transport stream capability with license key Combined DVB-S Capable Satellite and IP Input (RX800/HWO/DVBS/IP, FAZ 0 03/70) x L-band inputs x 00/000BaseT inputs Capability as per individual IP input and nd gen. Satellite input cards DVB-S QPSK License (RX8XX/SWO/DVBS/QPSK, FAZ 0 03/3) Adds DVB-S QPSK capability to DVB-S input option card DVB-S 8PSK License (RX8XX/SWO/DVBS/8PSK, FAZ 0 03/30) Adds DVB-S QPSK, 8PSK capability to DVB-S input option card DVB-S 6APSK License (RX8XX/SWO/DVBS/6APSK, FAZ 0 03/9) Adds DVB-S QPSK, 8PSK, 6APSK and 3APSK capability to DVB- S input option card DVB-S Multi-TS Mode (RX8XX/SWO/DVBS/VCM, FAZ 0 03/56) Provides DVB-S Multi-transport stream input capability Single transport stream output from receiver DVB-S Low Symbol Rate License (RX8XX/SWO/DVBS/LSM, FAZ 0 03/3) Enables DVB-S symbol rate of Msym/s to 5 Msym/s IP Transport Stream Input Options The RX800 may be configured with IP transport stream input connectivity via the following options. 00/000BaseT Input (RX800/HWO/IP/GIGE, FAZ 0 03/) MPEG transport stream over IP x 00/000BaseT input Very low latency SMPTE 0M Pro-MPEG FEC License (RX800/SWO/IP/PROMPEG, FAZ 0 03/37) Enables SMPTE 0M Pro-MPEG FEC capability for the IP input card Requires IP input card G.703 ATM Input Option The RX800 may be configured with G.703 ATM connectivity. G703 ATM Input (RX800/HWO/G703, FAZ 0 03/8) E3 or DS-3 inputs 3 Mbps or 5 Mbps rates DVB-T/T Input Option The RX800 may be configured with an input to allow reception of DVB-T and DVB-T digital terrestrial signals. DVB-T/T Input (RX800/HWO/OFDM FAZ 0 03/6) x UHF/VHF input 7MHz and 8MHz input bandwidth DVB-T demodulation. DVB-T demodulation with license keys DVB-T License (RX8XX/SWO/DVBT, FAZ 0 03/69) Adds DVB-T demodulation capability No multiple PLPs / channel bonding Input Redundancy The RX800 Advanced Modular Receiver offers as standard automatic redundancy switching between ASI input and the additional input option. This redundancy switching capability may be further enhanced with the following option. Null Packet Detection Redundancy Switching (RX8XX/SWO/NULL, FAZ 0 03/8) Redundancy switching from primary to secondary input triggered by presence of null packets in the incoming stream User definable percent of null packets to trigger redundancy switch VIDEO AND TRANSPORT STREAM OUTPUT OPTIONS The RX800 Advanced Modular Receiver offers the option of an SD only or HD and SD capable video output card. Both video output card options also provide ASI transport stream output connectivity. IP transport stream output capability may additionally be specified. SD Video and ASI Output (RX800/HWO/SD, FAZ 0 03/8) x composite video outputs x switchable ASI/SDI outputs 3 Gbps HD and SD Video and ASI Output (RX800/HWO/HD/3G, FAZ 0 03/0) x composite video output x RGB/PrPb analog video output 3x switchable ASI/SDI/HD-SDI outputs 3 Gbps HD-SDI output compatible with MPEG- :: 080p50/60 capability IP Transport Stream Output (RX800/HWO/IP/OUT, FAZ 0 03/) Encapsulation of transport stream output into IP multicast MPTS or single or multiple SPTS output stream with licence key x Gigabit Ethernet RJ-5 interfaces capability SMPTE 0M Pro-MPEG FEC License (RX800/SWO/IP/OUT/PROMPEG, FAZ 0 03/36) Enables SMPTE 0M Pro-MPEG FEC capability for the IP output card Requires IP output card 03-0-v3
CONDITIONAL ACCESS OPTIONS The RX800 Advanced Modular Receiver supports many types of widely used conditional access systems to allow for secure transmission of content. By default the RX800 is fitted with the capability to accept a Conditional Access Modules and comes pre-enabled for all frequently used single service CA systems. Additionally, the RX800 may be ordered with the enhanced capability to support multi-service decryption or to directly accept NDS BSkyB CA smart cards. Director by Ericsson Multi-service Decryption (RX800/SWO/DIR5/MSD, FAZ 0 03/8) Multi-service decryption for Director by Ericsson Single service Director decryption, over-air control and software download enabled by default DVB Common Interface Multi-service Decryption (RX800/SWO/MSD, FAZ 0 03/6) Multi-service decryption DVB Common Interface Single service Common Interface CA enabled by default BISS Multi-service CA (RX800/SWO/BISS/MSD, FAZ 0 03/) Multi-service decryption for BISS Single service BISS mode and E enabled by default NDS BSkyB CA (RX800/BAS/BSKB, FAZ 0 03/7) Single service decryption for BSkyB services Mutually exclusive with other CA types Ericsson RAS CA (RX800/SWO/RAS, FAZ 0 03/5) Ericsson RAS VIDEO DECODING OPTIONS The RX800 Advanced Modular Receiver provides capability to decode every video compression standard in use today including support for the highest quality MPEG- AVC :: and JPEG 000 standards. In order to offer ultimate cost effectiveness and flexibility JPEG 000, :: and ::0 video standards are ordered separately. ::0 Decode Options MPEG- SD ::0 Decoding (RX800/SWO/MPEG/SD, FAZ 0 03/5) Enables MPEG- SD ::0 decoding MPEG- HD ::0 Decoding (RX800/SWO/MPEG/HD, FAZ 0 03/) Enables MPEG- SD and HD ::0 decoding MPEG- AVC SD ::0 Decoding (RX800/SWO/MP/MP/SD, FAZ 0 03/0) Enables MPEG- and MPEG- AVC SD ::0 video decoding High bit rate SD MPEG- ::0 video decoding in conjunction with MPEG- and MPEG- :: hardware option MPEG- AVC HD ::0 Decoding (RX800/SWO/MP/MP/SD/HD, FAZ 0 03/) Enables MPEG- SD and HD, MPEG- AVC SD and HD ::0 decoding High bit rate HD MPEG- ::0 video decoding in conjunction with MPEG- and MPEG- :: hardware option Ericsson RX800 Advanced Modular Receiver :: Decode Options MPEG- :: Decoding Hardware (RX800/HWO/MP/, FAZ 0 03/5) Dormant hardware for MPEG- :: decoding Enable MPEG- :: decoding with additional options MPEG-/MPEG- ::, JPEG 000 Decoding Hardware (RX800/HWO/JK/MP, FAZ 0 03/57) Dormant hardware for MPEG-/MPEG- :: & JPEG 000 decoding Enable decoding with additional options MPEG- SD :: Decoding (RX800/SWO/MP//SD, FAZ 0 03/59) Enables MPEG- SD :: decoding Requires MPEG- & :: hardware MPEG- HD :: Decoding (RX800/SWO/MP/HD/, FAZ 0 03/39) Enables MPEG- HD :: decoding Requires MPEG- SD :: decoding option MPEG- and MPEG- AVC SD :: Decoding (RX800/SWO/MP//SD, FAZ 0 03/3) Enables MPEG- AVC SD :: decoding Enables MPEG- SD :: decoding MPEG- and MPEG- AVC HD :: Decoding (RX800/SWO/MP//HD, FAZ 0 03/) Enables MPEG- AVC HD :: decoding Enables MPEG- HD :: decoding Requires MPEG- and MPEG- AVC SD :: option MPEG- AVC HD :: 080p 50/60 Decoding (RX800/SWO/HDSDI/3G, FAZ 0 03/3) Enables MPEG- AVC HD :: 080p50/60 decoding Enables 3Gig HD-SDI output Requires MPEG- and MPEG- AVC HD :: decoding option 00ms end-to-end Latency in conjunction with Ericsson AVP encoders JPEG-000 Decode Options JPEG-000 SD Decoding (RX800/SWO/JK/SD, FAZ 0 03/) Enables JPEG-000 decoding with SD decoding functionality Requires RX800/HWO/JK/MP decoding option JPEG-000 HD Decoding (RX800/SWO/JK/HD, FAZ 0 03/3) Enables JPEG-000 HD decoding Requires RX800/SWO/JK/SD decoding option STREAM PROCESSING OPTIONS The RX800 Advanced Modular Receiver offers as sophisticated choice of transport stream processing capability allowing the unit to operate as a cost effective network interface into a headend or transport stream turn-around system Single Service Filtering (RX800/SWO/SING/SERVFILT, FAZ 0 03/53) Filter multiple services to output a single service Re-map PIDs for the outgoing service Multi-Service Filtering (RX800/SWO/MULT/SERVFILT, FAZ 0 03/7) Filter N multiple incoming services to M outgoing services Re-map PIDs for a single service CBR MPTS transport stream output Service splitting for multiple IP SPTS output 03-0-v3
VIDEO PROCESSING OPTIONS The RX800 offers a wide range of video processing options to allow the decoded video to easily interface to HD and SD infrastructures. Low Latency Decode (RX800/SWO/LDELA, FAZ 0 03/38) Low latency video decode (::0 and :: modes) Includes ultra low latency stripe refresh capability Compatible with linear and audio pass-throughs Requires MPEG- & :: hardware High Quality Down-conversion (RX800/HWO/HQDCONV, FAZ 0 03/60) Grade quality Down-conversion of HD to SD Capability to Down-convert 080p 50/60 to 080i, 70p or SD Provides broadcast quality simultaneous down-conversion allowing one HD transmission to address both HD and SD distribution needs Down-conversion (RX800/SWO/DCONV, FAZ 0 03/6) Grade quality Down-conversion of 080i or 70p HD to SD Simultaneous presentation of HD and SD on video output interfaces Up-conversion (RX800/SWO/UPCONV, FAZ 0 03/5) Up-conversion of SD to HD resolution (::0 modes only) Non-simultaneous up-conversion to 70p or 080i resolution Cross-conversion (RX800/SWO/XCONV, FAZ 0 03/55) Conversion of HD video from 70p to 080i or from 080i to 70p Frame Sync Input (RX800/SWO/FSNC, FAZ 0 03/33) Synchronizes the IRD to the house black and burst reference Frame Sync functionality often partners :: decoding applications Simulsync 3D Decode (RX800/SWO/3D, FAZ 0 03/6) Provides full frame, synchronized left & Right eye 3D capability Additionally requires Frame Sync, Down--conversion options Requires separate RX800 units for left & Right eye video decode DATA AND CONTROL OPTIONS The RX800 Advanced Modular Receiver can be further enhanced by a range of data pass-through and remote control capabilities. RS3 Remote Control and Data (RX800/HWO/RS3, FAZ 0 03/7) RS3 remote control - Alteia protocol RS3 data output Ericsson RX800 Advanced Modular Receiver AUDIO OPTIONS The RX800 Advanced Modular Receiver provides many different audio capabilities to allow optimal connectivity for many wide-ranging and varied applications. Capability for MPEG- Layer II audio is provided with any video decode license. Decoded audio will be embedded in (HD)SDI outputs and output via physical audio interfaces if ordered. Balanced Audio Output (RX800/HWO/BAL/AUD, FAZ 0 03/3) x stereo pairs of balanced analog and digital outputs Order QT two for x stereo pair capability Dolby Digital Decode (RX800/SWO/AC3, FAZ 0 03/) Enables decoding or pass-through of Dolby Digital Audio x 5. decode and down-mix to.0 (stereo) x full 5. decode - with Audio license x.0/5. pass-through -compressed and embedded in (HD)SDI AAC Audio decode (RX800/SWO/AAC, FAZ 0 03/) x AAC-LC and HE-AAC decoding Phase Aligned Audio (RX800/SWO/PAA, FAZ 0 03/9) Phase aligned MPEG- Layer II audio x phase aligned groups of x stereo pairs Requires x Audio license (RX800/SWO/AUD, FAZ 0 03/0) x Audio Capability (RX800/SWO/AUD, FAZ 0 03/0) Enables up to eight decodes Enables pass-through of audio services three and four Compatible with MPEG- Layer II, Dolby Digital, AAC, Dolby E and linear audio Embeds up to eight channels of audio into the (HD) SDI video output Requires QT two audio output cards if four stereo pairs of physical audio interfaces are desired XLR Terminal Audio Break-Out Cable (RX8XXX/CABLE/XLR, FAZ 0 008/) Provides XLR terminal connections for analogue and digital audio output x stereo pair per breakout cable via x XLR connectors Screw Terminal Audio Break-Out Cable (RX8XXX/CABLE/SCRTRM, FAZ 0 008/3) Provides screw terminal connections for analog and digital audio output x stereo pair per breakout cable via x Screw terminal connectors *Check availability High speed IP data output (RX800/SWO/IP/DATA, FAZ 0 03/35) MPE based data de-encapsulation of IP data Requires IP TS output option (RX800/HWO/IP/OUT, FAZ 0 03/) 03-0-v3
03-0-v3 Ericsson RX800 Advanced Modular Receiver UNIT ORDERING À la Carte The RX800 Advanced Modular Receiver is available to order with an à la carte selection of options allowing the unit to be tailored to your precise needs incorporating just the functionality you require thus allowing an individual and optimal balance of price against functionality. Configuration Packs Alternatively RX800 can be purchased in a preconfigured form. These Configuration Packs are specifically targeted at different applications and contain all relevant functionality for their intended purpose. Marketing Code RX800/BAS RX800/HWO/OFDM RX800/HWO/IP/GIGE RX800/HWO/G703 RX800/HWO/DVBS/ RX800/HWO/DVBS/IP RX800/HWO/HD/3G RX800/HWO/BAL/AUD RX800/HWO/IP/OUT RX800/HWO/JK/MP RX800/HWO/HQDCONV RX800/HWO/RS3 RX800/SWO/NULL RX800/SWO/DVBS/8PSK RX800/SWO/DVBS/6APSK RX800/SWO/DVBS/LSM RX800/SWO/FSNC RX800/SWO/DVBT RX800/SWO/IP/PROMPEG RX800/SWO/CI/MSD RX800/SWO/BISS/MSD RX800/SWO/RAS RX800/SWO/MPEG/SD RX800/SWO/MP/MP/SD/HD RX800/SWO/MP//SD RX800/SWO/MP//HD RX800/SWO/JK/SD RX800/SWO/JK/HD RX800/SWO/HDSDI/3G RX800/SWO/3D RX800/SWO/LDELA RX800/SWO/DCONV RX800/SWO/UPCONV RX800/SWO/XCONV RX800/SWO/AC3 RX800/SWO/AAC RX800/SWO/AUD RX800/SWO/PAA RX800/SWO/IP/OUT/PROMPEG RX800/SWO/SING/SERVFILT RX800/SWO/MULT/SERVFILT RX800/SWO/IP/DATA RX8XXX/CABLE/XLR The Works Satellite The Works IP/Satellite Events Satellite Events IP/Satellite DSNG SAT DSNG G703 DSNG IP/Satellite Premium Satellite Premium OFDM Premium IP/Satellite Basic Satellite Basic OFDM Basic IP Network Adaptor OFDM Network Adaptor IP Network Adaptor G703 Configuration Pack
SAMPLE CONFIGURATION Ericsson RX800 Advanced Modular Receiver SPECIFICATIONS STANDARD FEATURES Input Interfaces ASI Transport Stream Input Connector: x BNC (F) 75 Ohm Max. input rate: 60 Mbps Packet length: 88/0 byte packets Standard: EN50083-9 Features Program selection for ATSC, DVB and MPEG -only streams One alarm relay, two relays under SCTE 35 control Service cycling through all decodable services Control Front panel keypad and LCD SNMP control, traps and alarms Web browser INPUT OPTIONS Satellite Input Options nd Generation Satellite Input, Satellite & IP input (FAZ 0 03/6, FAZ 0 03/70) Connector: x F-Type (F), 75 Ohm Modulation: DVB-S QPSK Standard: EN300 Frequency range: 950 MHz to 50 MHz Input level: -5 dbm to -65 dbm DVB-S Symbol rate: Msyms to 5 Msyms DVB-S Symbol rate: (5) Msyms to 60Msyms on inputs &, Max bit rate 70Mbps, 3 Msyms, Max bit rate: 8Mbps on input 3 & DVB-S FEC: /, /3, 3/, 5/6, 7/8 DVB-S FEC frame: Short & Normal frames DVB-S Physical layer scrambling DVB-S multi-transport stream via additional license LNB Power: 3V, 8V or off, khz on/off Sample configuration with: Satellite input, frame sync, HD video output, IP transport stream output and x Audio output modules installed DVB-S QPSK (FAZ 0 03/3) Modulation: DVB-S QPSK Standard: EN30 307 Symbol rate: 5 to 3 (60) Msyms FEC DVB-S QPSK: /, /3, /5, /, 3/5, /3, 3/, /5, 5/6, 8/9, 9/0 DVB-S 8PSK (FAZ 0 03/30) Includes DVB-S QPSK functionality Modulation: DVB-S 8PSK FEC, DVB-S 8PSK: 3/5, /3, 3/, 5/6, 8/9, 9/0 DVB-S 6APSK (FAZ 0 03/9) Includes DVB-S QPSK and 8PSK functionality Modulation: DVB-S 6APSK and 3APSK FEC, DVB-S 6APSK: /3, 3/, /5, 5/6, 8/9, 9/0 FEC, DVB-S 3APSK: 3/, /5, 5/6, 8/9, 9/0 Requires FAZ 0 03/6 option DVB-S Low Symbol Rate (FAZ 0 03/3) Symbol rate - extended to to 3 (60) Msym/s Applies to DVB-S modes only IP Input Options MPEG over Gigabit Ethernet IP Input, Satellite & IP input (FAZ 0 03/, FAZ 0 03/70) Connector: x RJ 5 Format: 00/000BaseT Max. input rate: 08Mbps SMPTE 0M Pro-MPEG FEC (FAZ 0 03/37) SMPTE 0M (Pro-MPEG) FEC G703 Input Options Ericsson G.703 (FAZ 0 03/8) Connector: BNC (F) Network: G.703 compliant PDH Input: E3 or DS-3 (selectable) Bit-rates: 3 Mbps or 5 Mbps versions DVB-T/T Input Options DVB-T/T Input (FAZ 0 03/70) Connector: x F-Type (F) 75 Ohm Channel bandwidth: 7, 8MHz Frequency range: UHF 70 86 MHz, VHF 7 30 MHz Input MER level: 6-36dB VIDEO AND TS OUTPUT OPTIONS Video Output Options SD Video Output (FAZ 0 03/8) Composite Video Connector: x BNC (F) 75 Ohm Format: PAL / NTSC SDI/DVB ASI-C (Switchable) Connector: x BNC 75 ohms SD-SDI standard: SMPTE 59M Embedded Audio: SMPTE 7M (SD) Embedded Audio Channels: two, four or six stereo pairs ASI standard: EN50083-9 HD and SD Video Output (FAZ 0 03/0) Composite Video Connector: x BNC (F) 75 Ohm Format: PAL / NTSC Video RGB-HD (SVGA) Connector: x 5-pin D-type Format: RGB H&V/PrPb (switchable) SDI/HD-SDI/DVB ASI-C (switchable) Connector: 3x BNC 75 ohms 3 Gbps HD-SDI standard: SMPTE M HD-SDI standard: SMPTE 9M SD-SDI standard: SMPTE 59M Embedded Audio: SMPTE 99M (HD) SMPTE 7M (SD) Embedded Audio Channels: up to 8x stereo pairs ASI standard: EN50083-9 License key dependant *Check availability 03-0-v3
SPECIFICATIONS Ericsson RX800 Advanced Modular Receiver TS Output Options For ASI Out See HD & SD video out options IP Output (FAZ 0 03/) Transport encapsulation into IP MPTS/IP/UDP/RTP SPTS/IP/UDP/RTP with single service filtering - CBR mode IP output VBR mode - Null packets dropped x Gigabit Ethernet outputs, 00/000 autosensing SMPTE 0M Pro-MPEG FEC (FAZ 0 03/36) SMPTE 0M (Pro-MPEG) FEC Conditional Access Options Director by Ericsson Director single service decryption Director over-air remote control Director overt fingerprinting Director by Ericsson Multi-service Decryption (FAZ 0 03/8) Director multi-service decryption Decryption of up to services DVB Common Interface Enables support for all major CAM modules Single service decryption Service pre-filtering* DVB Common Interface Multi-service Decryption (FAZ 0 03/6) Single CAM, up to 0 services or PIDs BISS Decryption Decryption of BISS Mode and E BISS Multi-service Decryption (FAZ 0 03/) Decryption of up to services NDS BSkyB CA (FAZ 0 03/7) Accepts BSkyB smart card Single service descrambling Mutually exclusive with other CA types RAS Decryption (FAZ 0 03/5) Decryption of Ericsson RAS Stream Processing Options Single Service Filtering (FAZ 0 03/53) Filter multiple services to outgoing service Remap PIDs for the filtered service Output: CBR on ASI and IP SPTS Multi-Service Filtering (FAZ 0 03/7) Filter N incoming services to M outgoing services Number of services: max as x MPTS. Remap PIDs on a single service Output: CBR on ASI and IP MPTS Stream splitting - up to 8 services as IP SPTS VIDEO DECODING OPTIONS ::0 Decoding MPEG- SD Decode (FAZ 0 03/5) Profiles: MP@ML Max video rate: 5 Mbps (MP@ML) Video format: 80i and 576i 9.97, 5 fps MPEG- HD Decode (FAZ 0 03/) Includes MPEG- SD ::0 Profiles: MP@HL Max. video rate: 80 Mbps (MP@HL) Video format: 080i at 9.97 and 5 fps, 70p at 59.9 and 50 fps MPEG- AVC SD Decode (FAZ 0 03/0) Includes MPEG- SD ::0 Profiles: MP@L3 - All units MP@L3. Needs MPEG- & :: HW option Max. video rate: Mbps - All units 7.5 Mbps* - Needs MPEG- & :: HW option Video format: 80i and 576i 9.97, 5 fps MPEG- AVC HD Decode (FAZ 0 03/) Includes MPEG- SD and HD ::0 Includes MPEG- AVC SD Profiles: MP@L, HP@L - All units HP@L. - Needs MPEG- & :: HW option Max. video rate: 5 Mbps - All units, 6.5Mbps - Needs MPEG- & :: HW option Video format: 080i at 9.97 and 5 fps, 70p at 59.9 and 50 fps VBI with ::0 Decoding Modes Closed captions, DVB Subtitle burn-in, SD resolution Teletext burn-in WST, Inverted Teletext, EBU Teletext subtitles and non-subtitles, WSS, VITC, VITC in PES, VPS, Video Index, VANC data-piping, Service name in VANC, monochrome samples, OP7 pass-through VITS, NABTS, AMOL 8, AMOL 96, TV Guide License key dependant *Check availability :: Decoding MPEG- SD :: (FAZ 0 03/59) Profile: @ML Max. video rate: 50 Mbps Video format: 80i and 576i 9.97, 5 fps MPEG- HD :: (FAZ 0 03/39) Profiles: P@HL Max. video rate: 90 Mbps Video format: 080i at 9.97, 30 and 5 fps, 70p at 59.9, 60 and 50 fps MPEG- AVC SD :: (FAZ 0 03/3) Includes MPEG- SD :: MPEG- Profile: HP@L3 Max. video rate: 50 Mbps Video format: 80i and 576i 9.97, 5 fps MPEG- AVC HD :: Decode (FAZ 0 03/) Includes MPEG- HD :: MPEG- Profiles: HIGH / HIGH0 / HIGH@L. Sampling: 8-bit and 0-bit Max. video rate: 50 Mbps CABAC, 85 Mbps CAVLC Video format: 080i at 9.97 and 5 fps 70p at 59.9 and 50 fps MPEG- AVC HD :: 080p 50/60 decode (FAZ 0 03/3) Profiles: HP@L. Max video rate: 85 Mbps CAVLC Video format: 080p at 59.9 and 50fps VBI with :: decoding modes Closed Captions, VITC, VBI in PIX JPEG-000 Decoding JPEG-000 SD Profile: :: Max. video rate: 00 Mbps Video format: 80i at 9.97fps & 576i at 5fps Audio Pass-through only JPEG-000 HD Profile: :: Max. video rate: 00 Mbps Video format: 080i at 5 & 9.97 fps and 70p at 50 and 59.9 fps Audio pass-through only VBI with JPEG-000 decoding modes VBI in PIX in SD: Closed Captions, VITC, VBI in PIX Generic VANC in HD 03-0-v3
Ericsson RX800 Advanced Modular Receiver SPECIFICATIONS Video Processing Options High Quality Down-conversion (FAZ 0 03/60) Grade quality down-conversion Simultaneous Down-conversion (HD to SD): center cut out, manual/afd controlled Down-conversion from 080p 50/60 to 080i, 70p or SD Down-conversion (FAZ 0 03/6) Grade quality down-conversion from 080i or 70p Simultaneous Down-conversion (HD to SD): full frame, center cut out, letter box, anamorphic - manual/afd controlled Up-conversion (FAZ 0 03/5) Non-simultaneous up-conversion (SD to HD): To 70p or 080i (::0 modes only) Cross-conversion (FAZ 0 03/55) Non-simultaneous cross-conversion 70p to 080i or 080 to 70p No frame rate conversion Aspect Ratio Conversion 6:9 to :3 center cut ARC in SD modes Frame Synchronization (FAZ 0 03/33) Enables Frame Sync Connector: x BNC (F) 75 Ohm Input signal: Analog SD Hsync (black & burst) Data and Control Options RS3 Remote Control and Data (FAZ 0 03/7) Remote control connector: x 9-pin D-type RS3 remote control Ericsson Alteia protocol RS3 data connector: x 9-pin D-type RS3 asynchronous data RS3 data rate: Max. 38. kbps IP High Speed Data (FAZ 0 03/35) MPE based data de-encapsulation Max. bit-rate: 00 Mbps Requires IP TS output card Audio Options Balanced Audio Output (FAZ 0 03/3) Connector: x 9-Pin D-type Analog audio: two balanced stereo pairs Digital audio: two balanced stereo pairs Order QT 0, or ( - requires RX800/ SWO/AUD) Standard with any Video Decode Option: x MPEG- Layer-II audio decode x Dolby Digital Plus Pass-through x Dolby E pass-through x Linear PCM decode Audio sampling rate: 8 khz Decoded audio gain adjustment Dolby Digital (FAZ 0 03/) x Dolby Digital 5. decode and down-mix to.0 x Dolby Digital.0/5. pass-through compressed and embedded in (HD)SDI x Dolby Digital 5. decode Dolby Digital Plus x Dolby Digital Plus.0/5. pass-through compressed and embedded in (HD)SDI AAC Audio (FAZ 0 03/) x 5. down-mix to.0 x.0 decode x 5. decode Phase Aligned Audio (FAZ 0 03/9) MPEG- Layer II audio x phase aligned groups of x stereo pairs, Phase aligned to enable 5. carriage Requires x audio license FAZ 0 03/0 x Audio Capability (FAZ 0 03/0) Extends licensed audio decodes to more channels 8x MPEG- Layer II audio decode 6x Dolby Digital.0 decode, 5. to.0 downmix x Dolby Digital.0/5. pass-through - compressed and embedded in (HD)SDI x Dolby Digital Plus.0/5/ pass-through - compressed and embedded in (HD)SDI 6x 5. AAC down-mix to.0 6x.0 AAC decode x Dolby E pass-through x Linear PCM pass-through Physical and Power Dimensions (W x D x H).5 x 55 x mm (7.5 x 0.7 x.75 approx.) Input Voltage 0 VAC / 0 VAC Power Consumption 0W Max. (depending on options fitted) Cooling Integrated fan Environmental Conditions Operating Temperature 0 C to +50 C (3 to F) Storage Temperature -0 C to +60 C (- to 0 F) Relative Humidity 5% to 95% Compliance CE marked in accordance with EU Low Voltage and EMC Directives EMC Compliance EN550, EN6000-3-, EN6000-3-3, EN550, CISPR, FCC CFR7 Part 5B Class A Safety Compliance EN60950-, IEC60950-, UL60950- License key dependant *Check availability Americas Ericsson Television Inc. Asia Pacific Ericsson Television Limited Australasia Ericsson Television Pty Limited EMEA Ericsson Television Limited Tel: + (678) 8 6300 Email: tvsalesamericas@ericsson.com Tel: +85 590 388 Email: tvsalesapac@ericsson.com Tel: +6 9 999 Email: tvsalesanz@ericsson.com Tel: + (0)3 808 000 Email: tvsalesemea@ericsson.com Ericsson AB. All rights reserved. Ericsson maintains a policy of product improvement and reserves the right to modify the specifications without prior notice. www.ericsson.com/television 03-0-v3